I want to fill an array from values in range A1:H10. I want to fill the array with all rows in range and only columns B,C and E. I have the code below so far using index function.
Is there a more direct way to select all rows from desired range to avoid the need to create an array of rows from 1 to LastRow and then use Application.Transpose(RowsArr) (in red) inside Index()?
I need to accomplish selecting a range using variables for the starting cell and ending cell rows and columns.
Pseudo code (how I'd like the syntax to be, but isn't):
Worksheets(mysheet).range(startCellRow, startCellCol : endCellRow,endCellCol).Select
With Selection
...
End With
I have to run reports every week where I show the number of days items are pending some sort of action. I use an autofill action in a macro but the number of rows changes every week. Here is the current section of my macro that I use. I just input a row number that I know will not exceed the number of rows required by my data (12900). What can I replace this with (Selection.AutoFill Destination:=Range("J2:J12900") so it will only fill the number of rows current filled in in either row I or K?
Range("J2").Select ActiveCell.FormulaR1C1 = "=R1C19-RC[-1]" Selection.AutoFill Destination:=Range("J2:J12900") Range("J1").Select Selection.Copy Columns("J:J").Select Selection.PasteSpecial Paste:=xlPasteFormats, Operation:=xlNone, _ SkipBlanks:=False, Transpose:=FalseApplication.CutCopyMode = False
I have a date in cell s1 that I subtract from the date in row "I". I then copy the result of row J and paste it as values.
I'm trying to use relative references and am have having trouble with selecting a range for the fill down command.
I'd like to copy a formula down in the last column from row 1 to the last row with data. Column D is static so I can always use it to find the last row. The last column will vary; sometimes it might be G another time it might be X. I'm able to get the formula entered into the proper cell but I can't figure out how to select the range for a fill down.
If I was not using relative references and cell X1 always had the formula then Id code it like this:
'*** Find last row with data
Range("D1").Select
LastRow = Range("D65536").End(xlUp).Row
'*** Calculate length of cell in previous column
[Code]....
It's the last range statement that stops me. I haven't come up with a variation that allows me to select a range from the cell on the first row of the last column and select the last row with data for the same column.
I've created a userform that uses parallel arrays to display strings that another macro pulls from a worksheet and the 2nd array holds strings of what the user types in. I've uploaded a workbook with the userform in it.
Part 1:
I want to pass the 1st array (pSource) in during the initialization of the array and I want to send back the 2nd array (pUser) from the submit button, but I have no idea how to work it. I've tried a couple things from older posts in the forums, but had no luck with them.
Part 2:
The arrays will be the same size, but the size isn't a constant. Is there any way to change the size of an array? I've been using 0 to 3 for testing the rest of the userform, but for the final product, I'll be passing an array in of a variable size.
Private pSource(3) As String 'Modify to work with variable size
Private pUser(3) As String 'Modify to work with variable size
I got the following loop that is very slow. The main way (I think) to speed it up is to avoid looking at all the 65000 cells. The columns used in the calculations have data varying from a few hundred cells up to (rarely) dozens of thousands. I assume it would be better if I could replace the 65500 with something indicating the "end" of the data in the column. Also, is there another way to do this process without using a loop?
I am trying to fill in a number of rows with array formula's in the adjucent cells. I use the loop because the number of rows depends on a selection of another parameter which sets the row number before calling the loop.
I searched and found a few posts about transposing arrays into a range of cells, but none of them seemed to solve my problem. So, my problem is, I have a .Net assembly which provides various functions to allow Excel to access our Oracle DB stored procedures/tables, etc. This assembly is exposed via COM Interop. I call the GetSPINTypes() method, which returns me a list of type pairs (ID, Name), in a CSV string format.
I split the CSV into rows, and then put each row into a 2-dimensional array.
I then need to dump that array into one of my sheets in Excel, so I try to do the usual Range.Value = Array, but this sometimes tells me there is a type mismatch, and most times just doesn't fill the range. I've checked my arrays in the watch window, and they have definitely been filled in correctly, the values just don't appear when they are put into the sheet. See the code I'm using below:......
I want to select a range of rows 11, 14 and 23 to 24 in column j, plus the 2 rows to the right of column J and run a sum formula on the range. My procedure is selecting rows 11/14/23/24 and doing the sum for only column J. How do I make it so it runs the sum formula on all 3 columns. My code is copied below. I am fairly new to VBA.
Code:
With ActiveSheet.Range(Cells(27, j), Cells(27, j)).Select
Set sumRng = Intersect(Range("15:21, 25:25"), Columns(j)).Offset(0, 2)
ActiveCell.Value = WorksheetFunction.Sum(sumRng)
End With
I would like to loop through cells row wise.
Columns which have data are A:E
modify below code to select the range from columns A to E?
[Code] ........
I am trying to select rows in excel using a macro and then hide the rows, but i want to be able to add rows within this selection and still be able to hide the complete selection of rows.
The macro i am currently using is shown below: This hides rows 131 - 205, but if i was to add in another row in between so the range i now want to hide is 131-206 can i get the macro to update to this new range?
[Code] ......
I have 4 columns. I want to add 100 to all rows in the first column, 150 to the ones in the second, etc. Is this possible? I have Excel 2007.
View 9 Replies View RelatedI have a pivot table full of data that needs a macro/vba/something to loop through it and hide all rows that have no fill color. The table had 210 rows so I want a quick way of hiding the irrelevant ones (only the ones filled in green or red), and so all the ones with no fill need to be hidden. Something like a button to hide/unhode would be ideal.
View 4 Replies View RelatedI want to write a macro to fill color in row 8 of the worksheet as solid black . Also columns P,T,AP,BC ,BE and BG should be filled solid black and width should be 1 for the row and the column.
View 7 Replies View RelatedI have a table = Columns A - E contain data in a variety of formats
Code1
Code2
Code3
Code 4
Code 5
Code6
dog
9
12/1/1987
hamster
dog,9,,12/1/1987,hamster
What Column F (code 6) should contain is a csv of Columns A-E as shown.
What formula for Column F will automatically fill the values for all data within a row in a csv?
Using VBA, I need to Select A1:C14.
The problem is that A1:C14 contains blank cells, and there is also an adjacent column D that I do not want to copy.
So, UsedRegion and CurrentRegion aren't doing it for me. (It selects Column D too.)
Obviously, this is an example...the real data set is an export and varies in size.
Data file with few columns. There are groups of similar ID numbers in Column J. For a group of similar ID numbers in consecutive rows there is only one row that has a number greater than 0 in its Column L cell and the rest of the cells of Column L for that set of similar IDs is filled with 0s.
First for that unique ID group I need to find out which row is it that has a value greater than zero in its Column L cell.
Then I need to use that value to fill the rest of the 0s in Column L corresponding to that set of Unique IDs.
The process continues with identifying similar IDs in Column J and this time doing the same thing for their Column M. I have attached a sample file that shows the data and how the results need to look like.
See here Fill Cells.xlsx
I am trying to fill in reference cells horizontally but fix the column and increasing the row number as it fills. For examples I want to start my refence as "=A1" in cell B1. I want to copy this reference horizontally to column Z1 but want the refences to be A1, A2,...,A26. Excel only seems to increase columns when filling horizontally and rows when filling vertically. Transpose works but it's an array which would slow the spreadsheet down.
View 4 Replies View RelatedI am a locksmith and attempting to write a spreadsheet app. for my line of work. The output page will use columns A-G and rows 1-?10000? depending on the size of the system. If a 5 pin system is requested then columns A+B will be blacked out. 6 pin system A is blacked out. 7 pin system nothing blacked out. Also, if any cell matches the master key that was input, that cell is filled with red. I know, confusing.
Basically, I am trying to remove the blacked out columns automatically, and to remove the enitire row is any cell in that row is filled with red. Then to remove blank lines.
Hi if possible can someone please tell me how u populate a list box with three columns i want 1st col "A12:A209" 2nd col "B12:B209" 3rd Col "D12:D209" shown in it. Ive tried everything i can think of and cant get it to work
View 8 Replies View RelatedI'm running a macro that opens another workbook and read data from it.How can I incorporate this code into my macro.Sorry i don't knwo VBA.
Workbooks.Open Filename:="C:Documents and SettingsmsimantbDesktopINFRACHEM_POLYMERS - DON''T DELETE.xls]Sheet1"
UserGRP_MAcro Macro
Rows("1:3").Select
Selection.Delete Shift:=xlUp
Columns("A:B").Select
Selection.Delete Shift:=xlToLeft
Columns("B:E").Select
Selection.Delete Shift:=xlToLeft
Columns("A:A").EntireColumn.AutoFit
Rows("2:2").Select
Selection.Delete Shift:=xlUp
Range("B1").Select
ActiveCell.FormulaR1C1 = "Existing userGroup"............................
code for an assignment, I have a table of values, the 5 colums are arrays, one with 20 student names and the other 4 are grades for 4 subjects, each colum being one subject.
I need code to find the average of each student and get it to display in a separate colum and averages for each subject also getting it to display in another row.
how do you find the number of rows and columns of an array?
View 4 Replies View RelatedI wanted to enter value in sheet1 on A1. Columns in sheet2 from B1 until the value entered in sheet1.A1 should be automatically filled.
E.g.
Sheet1.A1=5, then Sheet2.B1=1, Sheet2.B2=2, Sheet2.B3=3, Sheet2.B4=4, Sheet2.B5=5.
if Sheet1.A1=3, then Sheet2.B1=1, Sheet2.B2=2, Sheet2.B3=3.
if Sheet1.A1=7, then Sheet2.B1=1, Sheet2.B2=2, Sheet2.B3=3, Sheet2.B4=4, Sheet2.B5=5, Sheet2.B5=6, Sheet2.B5=7
etc.
I'm having difficulty finding a way to ask excel to lookup a value based on an array spanning multiple rows and columns. There's a mock example in the attached.
View 2 Replies View RelatedI'm trying to pull thesum of huge number of columns in this case the range of pulling the data is B2:E7 based on two criteria (B8 and B9) The result is on B11
Sheet1
*
A
B
C
[Code].....
I need a formula that allows me to autofill a cell with "X" kind of data after I choose a validated data of Cell A1;
View 6 Replies View RelatedI've made a drop down list and when I select multiple cells and choose from the drop down list, it only fills one. Here's pictures:
So in that first picture, I've selected multiple cells. But when I drop down the menu and click my selection, this happens:
Why is it that all the cells I've selected does not fill with the option that I chose from the drop down. I highly doubt that I have to manually click all the ones I want to fill with what I choose from the drop down list.
I've successfully copied the array of equations using the VBA that Pjoaquin enlightened me with from my last thread. The outcome was Sheet2!A2:O2 being successfully populated with the equations from my first sheet... but here comes the problem: I'm looking to autofill A2:O2 down to the last record in Column P. But the number of records in this table is varable.
View 2 Replies View RelatedI am trying to clean up a macro a little that used to look like the following:
Sub Refresh()
Sheets("Sheet2").Select
ActiveSheet.QueryTables(1).Refresh BackgroundQuery:=False
ActiveSheet.QueryTables(2).Refresh BackgroundQuery:=False
Sheets("Sheet3").Select
ActiveSheet.QueryTables(1).Refresh BackgroundQuery:=False
I want to set up an array and have the code run through a loop and have gotten stuck on the following:
Sub Refresh()
Dim i As Integer
Dim SheetName As Variant
It does not seem to want to go from the first sheet to the second. What am I doing wrong/what can I do better?
I want to find the row position in an array.
1 200 CAR 001
2 230 CAR 002
3 400 TRUCK 001
4 200 BUS 001
5 250 CAR 003
6 250 BUS 002
7 200 BUS 003
8 730 CAR 004
in 4th column it should say that this is "n"th position of 3rd column value.
ex.
in 4th row 3rd column 1st "BUS" appears. hence column 4 is 1
in 6th row 3rd column 2nd "BUS" appears. hence column 4 is 2
in 7th row 3rd column 3rd "BUS" appears. hence column 4 is 3
tell me how to automate this