I am trying to use an ISERROR function in an array formula, but it doesn't seem to be working. The formula I am using is as follows: ={IF(ISERROR(MMULT(Covar1,MMULT(MINVERSE(BC111:CX158),E161:E208))),0,MMULT(Covar1,MMULT(MINVERSE(BC111:CX158),E161:E208)))}

I would like some code that would wrap if(iserror) around a formula, so that if the result is an error then no text is shown. It would be good if I could select a range and the formula would be adjusted for all cells with formula in. (Would be even better if cells with references in could have if(isblank) instead!) I am currently spending ages adjusting all my formulas manually and haven't got time to try and work out how to do this with vba.(I'm not very experienced with it!)

e.g. =INDEX('Characs Single'!$B$1:$C$100,MATCH('1Report'!$B12,'Characs Single'!$B$1:$B$19,0),2)

I'm going wrong with this formula: =if(iserror(J3-VLOOKUP (H3,$H$730:$J$1456,3,FALSE)," "(J3-VLOOKUP(H3,$H$730:$J$1456,3,FALSE)). I feel like I've used a variant of this formula before without encountering any problems.

I am wondering if I have nested too many functions for this to work properly. In the case where one of the first two if statements are true (an error would be produced), I am receiving a "0" as specified. However, in the case where the statement VLOOKUP(C75&" - "&D75,'Sheet1'!$A$3:$I$5442,9,FALSE) results in an error then I should have the return of VLOOKUP(C75&" - "&G75,'Sheet1'!$B$3:$I$5442,9,FALSE), but am getting a #REF! error instead.

I am trying to fix the below formula =IF(OR(ISERROR((F26-E26)/F26),((F26-E26)/F26)=1),"",(F26-E26)/F26). If I get an error from the formula I want it to return a blank cell. If I get 1 as the answer to the formula I'd like it to return a blank cell. This formula only works if the result is 1 but won't return a blank cell if the answer is an error.

My problem is when i get a product that isnt in the reference sheets (ie. in cell I19), so when that happens i get "#N/A". I know i can add in ISERROR into my formula, but every time i've tried this it hasn't worked so im missing something...

For FormulaRemake = 2 To 2000 Worksheets("Data"). Range("D" & FormulaRemake).Formula = ""=If(ISERROR(Data!W"" & FormulaRemake - 1 & "")"" & ""=True,"",Data!W"" & FormulaRemake - 1 & "")"" Next Application.ScreenUpdating = True

I'm having troubles with the syntax for the .Formula part. I read that when you do this you're supposed to double quote everything, except if you need a "" in it...? Should look like this when done right: =IF(ISERROR(Data!W1)=TRUE,"",Data!W1) Also is there anything besides ScreenUpdating that will make this code run faster?

I was wondering if there was a way to show how many characters you have typed in a cell (as you type) either with a msgbox or a formula? It needs to display the Character Count live AS YOU ARE TYPING.

I have two ranges: A1:F1 and A5:A10, 6 elements in each range. When I multiply one by the other I have to enter a formular in some cell (let's say, A14 - we will put the result there): "=MMULT(A1:F1, A5:A10)" and then press Ctrl-Shift-Enter. Very simple.

Question is this: suppose I do not know in advance that I will have 6 elements in each vector, it might be more than 6 or less than six. I will introduce an integer "n", which is the number of elements. Now I have to write a Sub that will perform multiplication. I wrote smth that does not work and I was wondering if someone has ever done this already and can give me a guidance what I am doing wrong. I HAVE ONE CONSTRAINT: I HAVE TO TYPE IN THE FORMULA INTO THE SPREADSHEET VIA VBA (as this will be used further in Solver, which requires formulas to be present in cells).

Y Sub test() Dim n n = 2 Range("A14").Formula = "=MMULT(A1: & Chr(64+n-1)& 1, A5:A & 5+n-1)" End Sub

I thought it would be equivalent to MMULT(A1:B1, A5:A6).

I have a table that calculates both grand totals and sub-totals, with one cell always showing the grand totals, and one cell that would show different sub-totals based on which filters are applied.

I am using the following formula to find the grand total: {=SUM(IF(ISERROR(DL14:DL1541)," ",DL14:DL1541))}

I am attempting to use this (non-working) formula for the sub-total: =SUBTOTAL(9,DL14:DL1541)

The problem is that I have a lot of cells with "#N/A" in them, and can't figure out how to get the sub-total formula to work. I've tried rewriting the sub-total formula in several different ways, but can't get it to work.

Say I have 3 columns of data: A1:C10 and I want to run a Match() function on them all together to see if I get a match any one those cells, say the value of have in X1.

Since, Match only allows a One-Column lookup array.. is there a way to "concatenate" or "append" the 3 columns together within a formula so now I would be looking to Match in an array that is 1 column * 30 rows?

Basically want to convert =Match(X1,A1:C10,0) to =Match(X1,A1:A30,0) without moving around the raw data in the sheet.

And I want to avoid doing an AND or OR formula that uses 3 separate MATCH() for each column.

I have a hunch that the MMULT or MMULT/TRANSPOSE functions are involved, but can't seem to get it right.

i need to replicate what i did using array formulas with VBA macro (array variable). to make things clear and simple i created an example for illustration only. look at it & u will find what i did & what i need to do ,much of it in writing so that i accurately describe my problem. attached is my example

I currently use the following formula using IF and ISERROR i.e.

=IF(ISERROR(IF(O12-(O12/100*80)<S12,"",IF(O12="","","Warning 20% or less Cover Remains!")))," ",(IF(O12-(O12/100*80)<S12,"",IF(O12="","","Warning 20% or less Cover Remains!"))))

What I’m after is to add an addition condition e.g. using “IF(O12-(O12/100*80)<S12” and “IF(O12-(O12/100*90)<S12” which would display either Warning 20% or less Cover Remains! or Warning 10% or less Cover Remains! incorporating ISERROR to avoid #N/A

Anyone have a way to create a macro that will convert a formula that returns an error into and IF(ISERROR) formula?

I have inherited a financial model in which the programmer did not consider that hundreds of the formula results would be #DIV/0 unless there are entries in the source cells. I would like to create a custom macro that would convert the formula to an IF statement, so that if the formula in that cell is currently creating an error, return 0, if not run the formula.

I require a worksheet formula, something along these lines:

=IF(ISERROR(SEARCH("Cat",OR(A1,A2))),"No","Yes")

The formula is in A3 and I need it to test both cells A1 and A2 for the existence of the word Cat. The word may be in either, both or neither of the cells.

I'm having trouble with a formula. What I want to do is create a conditional formatting so if a cell contains certain keywords, it will highlight that cell.

What I want is if a cell contains the word BOX or PO or P.O. to highlight that cell or show either a true or false.

What I have is =IF(OR(ISERROR(SEARCH("BOX",A1,1),SEARCH("PO",A1,1),SEARCH("P.O.",A1,1))),1,0)

It works if I do it separately but when combined it just stays 1 all the time despite the cell not containing those words. Am I organizing the OR and ISERROR right?

I want to conditionally delete rows if the date in the row is later than today. For example, I have a table that has a set number of rows and columns, however the dates included vary. The first column of each row has a date. I want to compare that date to "=today()" which is in another cell in the same worksheet.