Using IF(OR And IF(ISERROR In Same Formula: Return A Blank Cell
I am trying to fix the below formula =IF(OR(ISERROR((F26E26)/F26),((F26E26)/F26)=1),"",(F26E26)/F26). If I get an error from the formula I want it to return a blank cell. If I get 1 as the answer to the formula I'd like it to return a blank cell. This formula only works if the result is 1 but won't return a blank cell if the answer is an error.
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
To Return A Blank Cell In A Formula
i have IF sentence that returns either a number or a blank cell (tried using "") in a colum. This data is entered in a chart. My problem is that that excel dont recognise the "" as a blank cell in my chart. Is there a way to do this? i could maybe use VBA to make my own function that clear.contents if the cell value is smaler than say 1?
View Replies!
View Related
Code To Add Nested IF & ISERROR Formula To Cell
Application. ScreenUpdating = False For FormulaRemake = 2 To 2000 Worksheets("Data"). Range("D" & FormulaRemake).Formula = ""=If(ISERROR(Data!W"" & FormulaRemake  1 & "")"" & ""=True,"",Data!W"" & FormulaRemake  1 & "")"" Next Application.ScreenUpdating = True I'm having troubles with the syntax for the .Formula part. I read that when you do this you're supposed to double quote everything, except if you need a "" in it...? Should look like this when done right: =IF(ISERROR(Data!W1)=TRUE,"",Data!W1) Also is there anything besides ScreenUpdating that will make this code run faster?
View Replies!
View Related
Return A Blank Cell
I am using Excel 2000 I am using the "IF" formula to pull in data into a forms section. I then save the forms section as a CSV file. When the IF statement returns the "false" value, it is looking to pull over a "blank" cell. When that happems, a "0" pulls over. I tried to put a "" in the blank cell, but while the output of the formulaa looks "Blank" when I convert the tab to CSV, the output is a quote mark ". I need the formula to display a real BLANK cell or something that acts like a blank cell
View Replies!
View Related
Vlookup To Return Blank Cell Instead Of #N/A
is there anyway to have a vlookup formula display a blank cell instead of #N/A if the value it was looking for is not found. For example the first spreadsheet contains the persons name say Bob, the 2nd spreadsheet that the vlookup formula is searching does not contain the name Bob right now excel shows #N/A but what I want it to show is a blank cell. I've tried conditional formating to just white out the text if #N/A appears but can't seem to get that to work.
View Replies!
View Related
Return First Nonblank Cell In Row
I'm trying to do several things. I have 6 columns (A:F) with column headers and 12 rows of data and not every cell has a number as its content. Some cells are blank. I have attached my file. Using Row 2 as my example: 1.) I want to return the contents of the FIRST nonblank cell in the range (A2:F2) in cell I2. 2.) If I2 is not blank, then I want to return the column header (text) which corresponds to the resulting number content of cell I2. 3.) I want to return the contents of NEXT nonblank cell in A2:F2 in cell K2. 4.) If K2 is not blank, then return the column header (text) which corresponds to the resulting number of K2. I will then repeat the 3rd & 4th scenarios in columns L thru S. What I’m trying to do is place all nonblank data up in the firstforemost columns (H thru S) as I possibly can so I can use the data from these new columns (H thru S) as my merge fields in a Word document.
View Replies!
View Related
VLOOKUP Returns N/A  Return Blank Cell
I have a normal VLOOKUP of this loookup range: A 1 B 2 C 3 D 4 =VLOOKUP(T14,U6:V9,2,TRUE) If the value in T14 is in the lookup range, I get the expected value returned. If the value exceeds the vlaues in the lookup range (e.g. I enter "E"), I get the last value in the range (4). How do I get it to return a blank cell if the entry in T14 is not found?
View Replies!
View Related
Return Earliest Date Without Corresponding Blank Cell
I have a date range, containing blanks and values. I need a function to show the earliest date that contains a nonblank value. The function should be robust enough that I can sort by date and still show the correct data. Example...(correct answer would be 10/26/2006) Date ... Value 10/23/2006 10/24/2006 10/25/2006 0.08 10/26/2006 0.10 10/27/2006 10/28/2006 10/29/2006 0.18 10/30/2006 0.20 10/31/2006 11/01/2006 11/02/2006 11/03/2006 (0.18) 11/04/2006 (0.15)
View Replies!
View Related
Vba To Wrap If(iserror) Around Formula
I would like some code that would wrap if(iserror) around a formula, so that if the result is an error then no text is shown. It would be good if I could select a range and the formula would be adjusted for all cells with formula in. (Would be even better if cells with references in could have if(isblank) instead!) I am currently spending ages adjusting all my formulas manually and haven't got time to try and work out how to do this with vba.(I'm not very experienced with it!) e.g. =INDEX('Characs Single'!$B$1:$C$100,MATCH('1Report'!$B12,'Characs Single'!$B$1:$B$19,0),2) would be come =IF(ISERROR(INDEX('Characs Single'!$B$1:$C$100,MATCH('1Report'!$B12,'Characs Single'!$B$1:$B$19,0),2)),"",INDEX('Characs Single'!$B$1:$C$100,MATCH('1Report'!$B12,'Characs Single'!$B$1:$B$19,0),2))
View Replies!
View Related
Basic IF Function. Return Cell Value Or Show Blank
For example if I were to take the data in cells d3($358), d4($321), d5($130), d6($82) and skip a cell to now make the same data into cells d3, d5, d7, d9. Next, the data in cells f3, f4, f5, f6 would be merge into the blank cells of d4, d6, d8, d10. The final result would look like column B. I have over two years of sales data in two separate columns that I need to merged into one column. Is there easier way without a simple cut and paste one cell at a time as this would take an enormous amount of time to complete? I’m not that good with VBA codes so a formula works good, but if VBA is the way to go then tell how to enter it on my worksheet.
View Replies!
View Related
Nested IF, ISERROR, VLOOKUP Formula Simplification
I have filled the following formula in many cells of a spreadsheet. =IF(ISERROR(VLOOKUP(D75,'Sheet1'!$D$3:$D$5442,1,FALSE)),0,IF(ISERROR(VLOOKUP(C75,'Sheet1'!$C$3:$C$54 42,1,FALSE)),0,IF(ISERROR(VLOOKUP(C75&"  "&D75,'Sheet1'!$A$3:$I$5442,9,FALSE)),VLOOKUP(C75&"  "&G75,'Sheet1'!$B$3:$I$5442,9,FALSE),VLOOKUP(C75&"  "&D75,'Sheet1'!$A$3:$I$5442,9,FALSE)))) I am wondering if I have nested too many functions for this to work properly. In the case where one of the first two if statements are true (an error would be produced), I am receiving a "0" as specified. However, in the case where the statement VLOOKUP(C75&"  "&D75,'Sheet1'!$A$3:$I$5442,9,FALSE) results in an error then I should have the return of VLOOKUP(C75&"  "&G75,'Sheet1'!$B$3:$I$5442,9,FALSE), but am getting a #REF! error instead.
View Replies!
View Related
MMULT & ISERROR In Array Formula
I am trying to use an ISERROR function in an array formula, but it doesn't seem to be working. The formula I am using is as follows: ={IF(ISERROR(MMULT(Covar1,MMULT(MINVERSE(BC111:CX158),E161:E208))),0,MMULT(Covar1,MMULT(MINVERSE(BC111:CX158),E161:E208)))}
View Replies!
View Related
Find First Blank Cell In Column & Return Adjacent Date Less Than Or Equal To Today
how to make the data look like a table with three columns. Other than the date, it is space delimited. I have a tracking spreadsheet where Column A is populated with dates for the year. Column C contains daily values. I don't always start entering daily values on the first day of the year, e.g., this year the first value in Column C corresponds to March 9. All values in Column C are contiguous  there are no blank cells until the value in Column A is greater than today's date code. I would like to use a formula (rather than VBA) to look down Column C and find the first nonblank entry where the value in Column A is less than or equal to today(). In this case, the formula should return the value for March 9, 2008. CREATE TABLES LIKE BELOW?Column A Column B Column C March 1, 2008Saturday March 2, 2008Sunday March 3, 2008Monday March 4, 2008Tuesday March 5, 2008Wednesday ...................
View Replies!
View Related
Formula Which Changes If Cell Is Blank
I have a spreadsheet which projects the amount of work on hand each week. It runs up to the end of the year and shows the estimated figures and then each week I input the actual figures. The way it works at the moment is that it looks at the estimated work on hand, adds the work on which has been received and then takes off the work that has been cleared...this then gives an estimated level of on hand work. What I want it to do is to look at the cell which would show the actual work on hand and if thats empty then go on to look at the estimated work on hand. In other words  I want a formula that looks at a cell to see if there's a figure in it and if not uses another cell instead. I have tried: =If(u5=0,r5+y5z5) but when I input a figure into U5 it inputs FALSE into the cell. I don't want it to do that, I want it to look in cell U5 and if there's something there then do U5+Y5Z5.....and if U5 is empty then do R5+Y5Z5
View Replies!
View Related
Adding IF(ISERROR) To Multiple And Nonsequential Cell References
Is there an easy way to change ='Week 1'!$D$21 ='Week 1'!$D$30 ='Week 1'!$D$39 ='Week 2'!$D$21 ='Week 2'!$D$30 ='Week 2'!$D$39 to =IF(ISERROR('Week 1'!$D$21), "", ('Week 1'!$D$21)) =IF(ISERROR('Week 1'!$D$30), "", ('Week 1'!$D$30)) =IF(ISERROR('Week 1'!$D$39), "", ('Week 1'!$D$39)) =IF(ISERROR('Week 2'!$D$21), "", ('Week 2'!$D$21)) =IF(ISERROR('Week 2'!$D$30), "", ('Week 2'!$D$30)) =IF(ISERROR('Week 2'!$D$39), "", ('Week 2'!$D$39)) Without having to change each one by hand? There is a pattern to the numbers. There are 5 weeks, rows 12, 21, 30, 39, 48 in columns D,I,N,S,X
View Replies!
View Related
Convert Blank Formula Cell To Empty Cell
I am using a IF(ISNA(Vlookup##,##,##)),"",(Vlookup##,##,##)) function, in order to remove N/A errors. Is there anyway to convert the "" values to back to an empty cell without anything in it (i.e not text "", but empty as it was originally). I find that the file sizes are very large, when using this function, as data (although blank) is stored in each cell (i know this, because if I use cntr+arrow, it sees it as data, and not an empty area). I don't want to manually go through each cell and delete them as there is quite a bit of data (10000 rows , 2 columns, 30 tabs)
View Replies!
View Related
Formula To Make Cell Blank Instead Of Zero
I am looking for a formula that will work with my current formula, and check that cells a1 and b1 contains information. If they do contain info then the original formula should carry on as usual and leave the answer in cell c1. I also need it so when no information has been entered in cells A1 and B1, C1 will be blank instead of containing a zero. This is the formula I have at the moment: =IF(SUM(A1=0,B1>0),B1A1,"No Charge?") A B C 10.1810.82
View Replies!
View Related
Blank Cell Shows 0 Or 12:00 AM If There Is Formula
I am getting 0 or 12:00 AM when I format cell as time and put formula. I working on timesheet using this formula (=SUMIF('2'!G4,"="&TODAY(),'2'!E17)). If date in G4 on sheet2 match with todays/current date then copy data in cell E17 to sheet3(b11). G4 = todays date E17 = time eg. 2:25 AM ( I have to format destination cell as time because E17 has time value Formula works fine but when there is no data in E17 or E17 is blank then my destination cell shows 12:00 AM.
View Replies!
View Related
Formula To Leave A Cell Blank
Probably a simple method that i have not tried. I have a table where some cells are populated with #N/A. I am trying to work out a formula in another cell saying if the cell that contains #N/A then leave this cell blank.
View Replies!
View Related
Formula Cell To Be Blank (Vlookup Returning #N/A)
If it can not locate the correct responce I want it the formula cell to be blank. How do I adjust my formula to do this? This is the forumal I am currently using =VLOOKUP(A26,Subs!A:F,5,0) I have also tried this one as well =IF(ISNA(VLOOKUP(A6,Subs!A:E,5,0))+(VLOOKUP(A6,Subs!A:E,5,0)=""),"",VLOOKUP(A6,Subs!A:E,5,0))
View Replies!
View Related
Formula To Show A Blank Cell When A SUM = Zero
On my spreadsheet i have 4 columns which are in currency format. The 5th column (total) adds the 4 up which currently looks like this  =SUM(BG44:BG45) this shows £0.00 in the 5th column. What i need is a formula in the 5th column (total) so that when it adds up the 4 previous columns if the sum = £0.00 then the total column should show a blank cell.
View Replies!
View Related
If No Data Leave It Blank (cell Contains Formula)
A1 has a date of 03/10/07 B2 has formula =A1 + 7 I want to copy that formula down the column B2 but if B3 is empty I get 01/07/1900 How Do I make so that if there's no date entered in A column I get blank cells but still retain formulas, I've been running into this issue with other formulas but I couldn't find any solution searching this forum,
View Replies!
View Related
If Then Formula: Return The Value Of The Cell
Here is the formula I used to return the value of the cell. =+((L2O2)/250)0.5 It return negative numbers so I used the If statement below to return 0 for any negative number and then I want it to return the value of the cell if the number is not negative. How do I finish the balance of the if statement to make that happen? =IF(P2<1,"0",)
View Replies!
View Related
Pivot Table Chaos: Blank Cells Return 0, Empty Cells Return Nothing
Hi, I desperately need help with a pivottable and can't find anyone else who's ever had this problem...I have a very large healthcare data table which for simplicity I will describe as follows. In essence the first two columns respectively are (A) location and (B) month. Let's say the third column (C) is the number of cases of the disease kidpox treated in each health centre during that month. The fourth column (D) is the total number of cases of everything treated during that month in each clinic. The fifth column (E) is the proportion of cases of this disease over all consultations for each health centre and month, and the formula in E2 is .....
View Replies!
View Related
Display/Show Blank Cell Via IF Formula/Function
The following are on a sheet: A1 = 5700 B1 = 235 C1 = 17:14 D1 = 5922 $E$1 = 09:01 $F$1= 3 $E$1 and $F$1 are (the only) absolutes/constants. A2 contains the following: =IF(A1>D1,B1,IF(A1+B1<D1,"d",IF(AND(C1<$E$1,B1<$F$1),"",B1)))) This translates as: =IF(5700>5922,235,IF(5700+235<5922,"d",IF(AND(7:14<09:01,235<3),"",235)))) The result is a variable/number (235), "d" or a blank cell (""). This formula is in a column and works fine where there are numbers in corresponding cells. The problem arises with corresponding cells which appear blank (show no values) but contain references to other cells: they result in a "d" when nothing should be displayed. So while a corresponding blank cell is correct if it shows no values, it gives me this problem  I don't want "d" or anything.
View Replies!
View Related
Leave Cell Blank From Formula Until Data Is Posted
I'm trying to create a worksheet to automatically make a football league table update once results are entered. I have entered a formula using the "IF" function which compares scores and then awards points. However before a game is played and the cells are left blank, the formula detects this as a "draw" and awards a point. how to prevent the formula operating until a result is entered?
View Replies!
View Related
Return Selected Cell Name Formula
Is there a formula that will return in A1 the selected cell name in range B1:B10 example : If I click in B2 I will read in A1 the word "B2" Easy to do with a message box but a formula? I do not want the user to have to accept macros when he or she opens the file Edit: If easier I could type in the cells their name and have the formula in A1 return the selected cell's "VALUE" example In B1 I would type B1 etc...
View Replies!
View Related
Return The Date In The Cell Containing The Formula
the last date input into a range covering multiple columns and return the date in the cell containing the formula): {=index(a9:n9,1,max(if(cell("format",a9:n9)="D4",column(a9:n9)))column(a9)+1)} My column headings use this pattern: Column A: Date Column B: Amount Column C: Date Column D: Amount Column E: Date Column F: Amount and so on. When I use the above formula, I end up with data from the last amount column instead of the last date column.
View Replies!
View Related
Return The Relative Formula Of Another Cell
I currently have a list of totals that i want to easily be able to change the cells that make up this total. I have been trying to set up one cell that contains the formula and then the remaining totals below are linked to this cell. Thus I change the formula in the top cell all the other totals also change.
View Replies!
View Related
Formula To Return Last But One Cell In Row
I currently use the following formula to find the last used cell in a row: =LOOKUP(2,1/($6:$6<>""),$6:$6) which works fine but I have been trying to amend it so that it returns the last but one cell in a row. Have tried using it with Offset but without success. Have found other solutions to finding to the last cell in a row albeit that a number of them do not seem to work with my project and likewise none of them seemed to allow customisation of any sort.
View Replies!
View Related
