Macro Codes For Conditional Formatting

Jan 26, 2012

Reference with the different possible codes used in creating your own conditional formatting in a macro?

I need to conditionally format cells, based on a different column of cells having a particular letter, to have a black up or down arrow.

View 9 Replies


ADVERTISEMENT

Conditional Formatting Macro

Nov 9, 2008

I am looking to create a macro that conditionally formats a cell depening on what words it contains.

if the cell has the word "level 1" in it = pink backround
"level 2" = red backround
"level 3" = Orange backround
"level 4" = Green Backround
"level 5" = Blue back round

i would like this to run on the active cell.

View 9 Replies View Related

Conditional Formatting Using A Macro ...

Apr 21, 2006

I am trying to work with conditional formatting using a macro.

How it works is I select the range I want to format manually then I run this macro.

It doesn't work

When I check the conditional format the formula is wrong. Instead of referencing the correct cell in columns E & F is is referencing E65282 & F65282

What do I need to change? ...

View 9 Replies View Related

VB Macro, FOR Loop With Conditional Formatting

Feb 25, 2010

I have a complex sheet where rows are continuosly overwritten and new data needs to be formatted each time. My macro works great aside from the fact the conditional format formula expression adds double quotes rendering the conditional format useless. After running the macro I can go into the conditional format field, remove the quotes, and the formatting formula works as expected. So...I first did a "record macro" to grab the code for conditional formatting:

View 2 Replies View Related

Can't Record Macro For Conditional Formatting

Feb 25, 2010

I am trying to record a macro for conditional formatting but when I check the VB Editor after I finish recording it, it only has

Sub CFTest()
'
' CFTest Macro
'
'
Range("D1:D4").Select
End Sub

How to get the keystrokes to record or what I need to do?

View 9 Replies View Related

Macro To Apply Conditional Formatting

Feb 29, 2008

I'm trying to find a macro to apply conditional formatting to a large number of cells,

What I would like to do is when cell E96 has a value of a, cells E3:F95 are shaded in grey. Then when cell G96 has a value of a, cells G3:H96 are shaded in grey, and so on down to IU96 having a value of a and cells IU3:IV96 shaded in grey.

View 9 Replies View Related

Replacing Conditional Formatting With A Macro

Jun 17, 2009

I've got a lovely little spreadsheet which looks like a more complicated version of this:

CaseResult1Pass2Fail3N/A4Pass (mark-ups)5Pass

I have conditional formatting on each cell of column A (titled Case) which looks at the next door cell in column B (titled Result), and if it turns out Pass, it colours the cell in A green. If it's fail, it colours the cell red, and so on.

So my spreadsheet, after formatting, looks like this:

CaseResult1Pass2Fail3N/A4Pass (mark-ups)5Pass

However, with the "Pass (mark-ups)" option, I've run out of conditions allowed (since I'm on 2003 excel). I can colour it in the same colour as other conditions, using the OR function, but I'd rather have it a separate colour.

I've got this macro here (which I've picked off the internet somewhere):

Private Sub Worksheet_Change(ByVal Target As Range)
Dim icolor As Integer
If Not Intersect(Target, Range("A1:A5000")) Is Nothing Then
Select Case Target
Case "Passed"
icolor = 4

View 9 Replies View Related

Can't Record Macro For Conditional Formatting

Feb 25, 2010

I am trying to record a macro for conditional formatting but when I check the VB Editor after I finish recording it, it only has ....

View 9 Replies View Related

Macro For Conditional Formatting Bottom Border

Jul 9, 2014

Possible to create a macro that would detect end page (jumping from page 1 to page 2 for instance) and add a bottom border at the last row of the page.

I have attached a sample where I highlight in green the end of the page and added manually the bottom border (I did it only for the first end pages).

View 7 Replies View Related

Macro To Add Conditional Formatting To Variable Range

Jun 16, 2008

I have 2 columns 'C' and 'D' which I want to apply Conditional Formatting to (i.e. colour the background of the cell in column 'D' for the respective row in colum 'C') if they contain different values. I have the following

Sub CellCCondFormatting()
Dim j As Long
Range("C2").Select
j = Range("C2"). CurrentRegion.Rows.Count
MsgBox ("1st: " & j)
Range("C2:C" & j).FormatConditions.Delete
Range("C2:C" & j).FormatConditions.Add Type:=xlCellValue, Operator:=xlGreater, _
Formula1:="=D" & j
Range("C2:C" & j).FormatConditions(1).Interior.ColorIndex = 3
Range("C2:C" & j).FormatConditions.Add Type:=xlCellValue, Operator:=xlLess, _
Formula1:="=D" & j
Range("C2:C" & j).FormatConditions(2).Interior.ColorIndex = 4
MsgBox ("2nd pass: " & j)
End Sub

It iterates through all rows in my CurrentRegion OK but the Conditional Formatting 'formula' operates on the wrong value in column 'D'. For example, when viewed via menu option Format > Conditional Formatting... row 2 column 'D's Conditional Formatting value is D1714, row 3 column 'D's value is 'D1715' and so on....................

View 2 Replies View Related

Conditional Summation Formula: Set SUM Code To Grab All Numbers Next To Codes

May 6, 2008

I am creating a billing sheet that has a column where charges are coded (to determine what they are for) and I want a "Grand Total" for everything followed by a breakdown "Total" for things with the same code. Is there a way to set SUM code to grab all numbers next to codes?? (EX. Column A is Billing Code, column B is Cost in $$; I want a total at the bottom that takes the different amounts in column B based on the various information/codes from column A).

View 2 Replies View Related

Macro Or VBA To Provide Conditional Formatting Based On Formulas

Mar 13, 2014

Is it possible to record a macro or write VBA to apply conditional formatting to certain columns of cells where there are exceptions/conditions for the different types of conditional formatting? If possible, can those exceptions/conditions be based on a specific type of formula?

See my DATA EXAMPLE picture linked below. On that example, Columns K-Q need conditional formatting but manager wants row 38 to be blue based on the fact that it is using a =SUM() formula. This represents one "part" out of 75 that could be on a given sheet, each "part" has a different number of sub-parts that are used. So I can't just highlight columns K-Q because of the occasional SUM row that needs to be blue.

The conditional formatting that I am currently using in Columns K-Q only apply to K3:Q37 and not to row 38 at all. I currently have conditional formatting on columns K-N, P-Q where when '=ISNUMBER(xx)' returns TRUE is white and when it returns FALSE is light orange. Column O uses '=ISTEXT(xx)' for the same colors. Manager doesn't want to copy paste that formatting and wants it setup as a Macro/VBA.

DATA EXAMPLE - [URL]

RELEVANT INFORMATION

Columns K-Q need conditional formattingColumn K - Formula pasted in only on lines that require the Sales Price to show, will return a number value or error

(=VLOOKUP(B38,'SaleWS'!C:G,5,0).Column L - Formula pasted in every cell in column except L38 is '=IF(Hxx="G",IF(Exx"Description EX",VLOOKUP($Dxx&$Gxx,'PriceWS'!$D:$F,3,0),""),"")'.

L38 has a sum of all above valuesColumn M - Formula pasted in every cell in column except M38 is '=IF(ISNUMBER(Lxx),Ixx*Lxx,"")'.

M38 has a sum of all above valuesColumn N - Formula pasted in every cell in column except N38 is '=IF(Exx="Description EX",VLOOKUP(Dxx,'Material'!A:O,15,0),"")'.

N38 has a sum of all above valuesColumn O - No formulas here, just manual entryColumn P - Formula pasted in every cell in column except P38 is '=IF(H38="P",VLOOKUP($Dxx&$Oxx,'PressWS'!$A:$L,12,0),"")'.

P38 has a sum of all above valuesColumn Q - Formula pasted in every cell in column except Q38 is '=IF(H37="W",VLOOKUP($Dxx,'WeldWS'!$A:$F,6,0),IF(Hxx="T",VLOOKUP($Dxx,'WeldWS'!$A:$F,6,0),""))'.

Q38 has a sum of all above values.Rows where they are using SUM for all the rows above for that part need to be blue

View 2 Replies View Related

Macro To Add Conditional Formatting Code To Variable Range

Jun 12, 2008

I am working with a large report that needs to be broken out and sent as separate files to recipients for confidentiality purposes. I'd rather not use views/protection since there are many different ways particular people need to see the data, plus it is a very large file and flattening it works to everyone's advantage. My goal is a macro that will copy each tab into separate workbooks, paste special values, and save as each as Cell A1 (or the tab name-same thing). I have tried recording macros and editing (I'm very new to VBA) many times but it's a mess.

View 2 Replies View Related

Macro Fill Down Function Is Changing Format In Conditional Formatting

Dec 18, 2013

When I hit the macro code you see below I get both columns D and E, starting from row 18, to get 'filled down' to the specified spot. Every second row has a conditional format (when a value is entered in column A) to change the row to the color grey, and every row between it has a conditional format (when any value is entered in column A as well) to have the row changed to the color red. The issue here is that the Macro code messes up the conditional formatting and uses the conditional formatting of those two cells, which are being dragged down, for those entire filled-down columns! This is what I am starting off with test1.xlsm and this is what I end up with using the macro code below (or doing it manually)

test2.xlsm

Is there a way for the Macro code to bypass this issue?

View 6 Replies View Related

Macro For Conditional Formatting Using Isna, Match And Indirect In The Formula

Apr 2, 2009

I have configured conditional formatting to check valid entries in a dependant list. I used the solution provided by SHG at:

http://www.excelforum.com/excel-prog...ant-lists.html

Now I need to use a macro to activate and deactivate the conditional formatting due to performance issues.

When the formula for data validation includes the indirect funtion I got a compile error and the macro won't run.

View 3 Replies View Related

Macro And Conditional Formatting: Formats The Data That Is Pasted Into It From An Access Database

Dec 2, 2008

The macro firstly formats the data that is pasted into it from an access database, then it does some calculations to determine when 10 working days from a specific date is, and when 20 working days from the date is (these go in new columns at the end of the data). The macro will also add new columns which say "Not resolved" if there is no date in the Resolution column, "Yes" in the "10 working days met?" column if the condition is met and the same for 20 workings days in a different column. As the colouring etc takes a long time I really wanted to add as conditional formatting to the macro!

how to attach a spreadsheet here then I can show you what the outcome we want is. A point to note is that there is not a set number of rows each time we do this, and I don't just want 1 cell to be coloured - I want to specify which cells in the row are coloured depending on the results in another cell on that row.

View 2 Replies View Related

Macro Script To Delete All Rows Hidden Using Conditional Formatting Color

Oct 6, 2011

After red filling certain cells based on some conditional formatting, I apply a filter to hide them. Now I need to delete them using a macro script.

View 9 Replies View Related

Conditional Formatting - Two Different Fields Affect One Cells Formatting For Date?

Sep 16, 2013

A little background on what i am doing. I have a spreadsheet that tracks when i have blown the dust out of our computers. I have set up conditional formatting so that the text turns red after 300 days and the cell turns yellow after 600 days. However, some computers are in high dust environments. I would like the spreadsheet to tell me to blow the dust out of these sooner. see the attached sheet.

dust 1.xlsx

View 2 Replies View Related

Macro To Lookup Many Codes

Nov 17, 2008

I have an excel workbook with two worksheets. The first worksheet contains a lot of data with more than 20.000 rows and 20 columns. The important part is that there are two different columns (column F and I) containing codes of items. What I would like the macro to do is the following:

write codes of items in the second worksheet column B under each other. I would like the macro to lookup the codes from this column in the first worksheet (column F and I) and if it finds then display in worksheet 2 column C the column in which found it on worksheet1. So basically I write on worksheet2 column B many many codes and then I press a button to do a search and displays next to the items (in column C) if it found the code in worksheet1 column F, or column I or both, or did not found it.

View 2 Replies View Related

Conditional Formatting Based On Another Cell Conditional Format

Mar 20, 2013

Is it possible to change the format of cell AI3 based on the format of cell C3 and D3? I have C3 and D3 set to turn red based on what is in cell C2 and D2. I would like the following done:

If AI3=C3 & C3 is red, format AI3 blue
If AI3=D3 & D3 is red, format AI3 blue
Otherwise, leave AI3 unformatted.

Possible???

View 3 Replies View Related

Macro To Compare Security Codes

Jul 18, 2008

I have 4 worksheets in a workbook: “choose security”, “download”, “MC” and “Lending”,

In the choose security” worksheet in CELL A2 is an HEX code, i.e. stock code.

2. In MC worksheet is raw data of all holdings related to various p’folios and securities, the information we need from this worksheet is,

a) p’folios, which are in column A,
b) Holdings which is Col B
c) Security code i.e. stock code which is in Col D

I need a macro or a formula to look at what security code is in “choose security” worksheet CELL A2, then look for this security in worksheet “MC” Col D, once matched, copy the data for this security to worksheet “download” and paste in CELL A3, I only need p’folios and holdings to be copied to “download” so data in Col A and B.

Once data has been copied to worksheet “download”, I then need another macro or formula to repeat step 2, but this time the macro will be looking at worksheet “Lending”,

a) P’folios, which are in Col B
b) Security code is in Col D
c) Holdings is in Col H

Once the macro or formula has found a match of security code, it will then copy the data from Col B and H to download worksheet CELL E3.

View 9 Replies View Related

IF Statement Using Formatting Criteria (NOT Conditional Formatting)

May 5, 2009

Is there "code" for different formatting in a spreadsheet so you can use an IF statement to do something like:

if(A1=blue background,"Yes","No")

or

if(A1=red text,"Yes","No")

etc.?? But replace "blue background" and "red text" with some sort of number code? I want to compile a list of the items that are formatted with certain background colors and/or text colors and then organize only those items into a chart.

View 5 Replies View Related

VBA To Convert Conditional Formatting To Fixed Formatting?

Jul 5, 2013

Any VBA that I can put into a macro that will convert conditional formatting into fixed formatting..? So when the cell contents/formulas are deleted the formatting remains. Assume that the range I want to convert is A1:D200...

View 9 Replies View Related

If Statement Limit Workarounds: Convert Various Codes From One Column Of Spreadsheet Into Different Codes In Another Column

May 5, 2006

I'm trying to convert various codes from one column of an excel spreadsheet into different codes in another column. I was able to accomplish this with "If" statements, however I'm only able to string together seven of these statements in one command. Is there a better way to add formulas for more than seven conversions? Below is a copy of what I've done so far with the seven converts:

=IF(ISNUMBER(SEARCH("WARN",J2)),"Warning",IF(ISNUMBER(SEARCH("PSSNAP",N2)),"Sales",IF(ISNUMBER(SEARCH("WARN",L2)),"Warning",IF(ISNUMBER(SEARCH("2699",L2)),"Warning",IF(ISNUMBER(SEARCH("4004",L2)),"Warning",IF(ISNUMBER(SEARCH("2036",L2)),"Warning",""))))))

I want to add about 15 more codes to convert within this formula but it's maxed out in the format I'm using.

View 3 Replies View Related

Save Sheet As Macro Enabled Workbook Using Codes

Jan 28, 2014

Working with a macro enabled workbook that has many sheets what would be a good code that would save Sheet1 into a new MACRO enabled workbook so that the 'Buttons' (which are linked to macros) on this specific sheet will be the only macros that will be copied to the new workbook as opposed to the rest of the macros that are found in different sheets?

Here is what I g=have:

[Code] ......

View 11 Replies View Related

Macro To Find And Add ISIN For A Company Based On Stock Codes

Jul 20, 2014

I have trying for 2 days now to write a macro/VBA that looks up IF the stock codes (i.e., in column A and G) match THEN insert the ID_ISIN from column H in the empty ISIN column C.

or should i use Vlookup?

View 3 Replies View Related

Looping & Conditional Format: Finds A "J" It Will Apply Conditional Formatting To A Row Of 4 Cells Directly Adjacent?

Feb 9, 2009

I need to run a loop through a column of values (attachment col B) and when it finds a "J" it will apply conditional formatting to a row of 4 cells directly adjacent. The attachment is a theoretical before & after.

View 2 Replies View Related

Conditional Formatting - More Than 3

Dec 9, 2008

In a column, there are 4 option for each cell -
"PAYMENT DUE"
"PAID"
"UNDERPAID BY..."
'OVERPAID BY..."

These are filled in by a formula

I would like to make them 4 different colours but excel only allows 3 options

View 14 Replies View Related

If Then Or Conditional Formatting??

Mar 5, 2009

I have a hard time when it comes to "If then" statements and conditional formatting. I have some data that I am collecting and entering into a spreadsheet for a couple different companies. Once I receive paperwork from those companies for the data collected I mark the data with a blue colored text. I would like to have a second sheet that generates what companies have not sent me their paperwork. "If the data is black text, then generate <name of company> on second sheet." The list is small right now, but as the project continues it will grow very large and it will become difficult to track. I will attach a copy of the spreadsheet for you to see the situation. I would like to learn how to do these types of formulas, is there a tutorial geared towards these types of situations?

View 2 Replies View Related

Conditional Formatting With Vba...?

Dec 23, 2009

I seem to have a problem using conditional formatting with Vba in Excel 2003
When I run -

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved