Replacing Conditional Formatting With A Macro
Jun 17, 2009
I've got a lovely little spreadsheet which looks like a more complicated version of this:
CaseResult1Pass2Fail3N/A4Pass (mark-ups)5Pass
I have conditional formatting on each cell of column A (titled Case) which looks at the next door cell in column B (titled Result), and if it turns out Pass, it colours the cell in A green. If it's fail, it colours the cell red, and so on.
So my spreadsheet, after formatting, looks like this:
CaseResult1Pass2Fail3N/A4Pass (mark-ups)5Pass
However, with the "Pass (mark-ups)" option, I've run out of conditions allowed (since I'm on 2003 excel). I can colour it in the same colour as other conditions, using the OR function, but I'd rather have it a separate colour.
I've got this macro here (which I've picked off the internet somewhere):
Private Sub Worksheet_Change(ByVal Target As Range)
Dim icolor As Integer
If Not Intersect(Target, Range("A1:A5000")) Is Nothing Then
Select Case Target
Case "Passed"
icolor = 4
View 9 Replies
ADVERTISEMENT
Nov 9, 2008
I am looking to create a macro that conditionally formats a cell depening on what words it contains.
if the cell has the word "level 1" in it = pink backround
"level 2" = red backround
"level 3" = Orange backround
"level 4" = Green Backround
"level 5" = Blue back round
i would like this to run on the active cell.
View 9 Replies
View Related
Apr 21, 2006
I am trying to work with conditional formatting using a macro.
How it works is I select the range I want to format manually then I run this macro.
It doesn't work
When I check the conditional format the formula is wrong. Instead of referencing the correct cell in columns E & F is is referencing E65282 & F65282
What do I need to change? ...
View 9 Replies
View Related
Feb 25, 2010
I have a complex sheet where rows are continuosly overwritten and new data needs to be formatted each time. My macro works great aside from the fact the conditional format formula expression adds double quotes rendering the conditional format useless. After running the macro I can go into the conditional format field, remove the quotes, and the formatting formula works as expected. So...I first did a "record macro" to grab the code for conditional formatting:
View 2 Replies
View Related
Feb 25, 2010
I am trying to record a macro for conditional formatting but when I check the VB Editor after I finish recording it, it only has
Sub CFTest()
'
' CFTest Macro
'
'
Range("D1:D4").Select
End Sub
How to get the keystrokes to record or what I need to do?
View 9 Replies
View Related
Jan 26, 2012
Reference with the different possible codes used in creating your own conditional formatting in a macro?
I need to conditionally format cells, based on a different column of cells having a particular letter, to have a black up or down arrow.
View 9 Replies
View Related
Feb 29, 2008
I'm trying to find a macro to apply conditional formatting to a large number of cells,
What I would like to do is when cell E96 has a value of a, cells E3:F95 are shaded in grey. Then when cell G96 has a value of a, cells G3:H96 are shaded in grey, and so on down to IU96 having a value of a and cells IU3:IV96 shaded in grey.
View 9 Replies
View Related
Feb 25, 2010
I am trying to record a macro for conditional formatting but when I check the VB Editor after I finish recording it, it only has ....
View 9 Replies
View Related
Jul 9, 2014
Possible to create a macro that would detect end page (jumping from page 1 to page 2 for instance) and add a bottom border at the last row of the page.
I have attached a sample where I highlight in green the end of the page and added manually the bottom border (I did it only for the first end pages).
View 7 Replies
View Related
Jun 16, 2008
I have 2 columns 'C' and 'D' which I want to apply Conditional Formatting to (i.e. colour the background of the cell in column 'D' for the respective row in colum 'C') if they contain different values. I have the following
Sub CellCCondFormatting()
Dim j As Long
Range("C2").Select
j = Range("C2"). CurrentRegion.Rows.Count
MsgBox ("1st: " & j)
Range("C2:C" & j).FormatConditions.Delete
Range("C2:C" & j).FormatConditions.Add Type:=xlCellValue, Operator:=xlGreater, _
Formula1:="=D" & j
Range("C2:C" & j).FormatConditions(1).Interior.ColorIndex = 3
Range("C2:C" & j).FormatConditions.Add Type:=xlCellValue, Operator:=xlLess, _
Formula1:="=D" & j
Range("C2:C" & j).FormatConditions(2).Interior.ColorIndex = 4
MsgBox ("2nd pass: " & j)
End Sub
It iterates through all rows in my CurrentRegion OK but the Conditional Formatting 'formula' operates on the wrong value in column 'D'. For example, when viewed via menu option Format > Conditional Formatting... row 2 column 'D's Conditional Formatting value is D1714, row 3 column 'D's value is 'D1715' and so on....................
View 2 Replies
View Related
Mar 13, 2014
Is it possible to record a macro or write VBA to apply conditional formatting to certain columns of cells where there are exceptions/conditions for the different types of conditional formatting? If possible, can those exceptions/conditions be based on a specific type of formula?
See my DATA EXAMPLE picture linked below. On that example, Columns K-Q need conditional formatting but manager wants row 38 to be blue based on the fact that it is using a =SUM() formula. This represents one "part" out of 75 that could be on a given sheet, each "part" has a different number of sub-parts that are used. So I can't just highlight columns K-Q because of the occasional SUM row that needs to be blue.
The conditional formatting that I am currently using in Columns K-Q only apply to K3:Q37 and not to row 38 at all. I currently have conditional formatting on columns K-N, P-Q where when '=ISNUMBER(xx)' returns TRUE is white and when it returns FALSE is light orange. Column O uses '=ISTEXT(xx)' for the same colors. Manager doesn't want to copy paste that formatting and wants it setup as a Macro/VBA.
DATA EXAMPLE - [URL]
RELEVANT INFORMATION
Columns K-Q need conditional formattingColumn K - Formula pasted in only on lines that require the Sales Price to show, will return a number value or error
(=VLOOKUP(B38,'SaleWS'!C:G,5,0).Column L - Formula pasted in every cell in column except L38 is '=IF(Hxx="G",IF(Exx"Description EX",VLOOKUP($Dxx&$Gxx,'PriceWS'!$D:$F,3,0),""),"")'.
L38 has a sum of all above valuesColumn M - Formula pasted in every cell in column except M38 is '=IF(ISNUMBER(Lxx),Ixx*Lxx,"")'.
M38 has a sum of all above valuesColumn N - Formula pasted in every cell in column except N38 is '=IF(Exx="Description EX",VLOOKUP(Dxx,'Material'!A:O,15,0),"")'.
N38 has a sum of all above valuesColumn O - No formulas here, just manual entryColumn P - Formula pasted in every cell in column except P38 is '=IF(H38="P",VLOOKUP($Dxx&$Oxx,'PressWS'!$A:$L,12,0),"")'.
P38 has a sum of all above valuesColumn Q - Formula pasted in every cell in column except Q38 is '=IF(H37="W",VLOOKUP($Dxx,'WeldWS'!$A:$F,6,0),IF(Hxx="T",VLOOKUP($Dxx,'WeldWS'!$A:$F,6,0),""))'.
Q38 has a sum of all above values.Rows where they are using SUM for all the rows above for that part need to be blue
View 2 Replies
View Related
Jun 12, 2008
I am working with a large report that needs to be broken out and sent as separate files to recipients for confidentiality purposes. I'd rather not use views/protection since there are many different ways particular people need to see the data, plus it is a very large file and flattening it works to everyone's advantage. My goal is a macro that will copy each tab into separate workbooks, paste special values, and save as each as Cell A1 (or the tab name-same thing). I have tried recording macros and editing (I'm very new to VBA) many times but it's a mess.
View 2 Replies
View Related
Dec 18, 2013
When I hit the macro code you see below I get both columns D and E, starting from row 18, to get 'filled down' to the specified spot. Every second row has a conditional format (when a value is entered in column A) to change the row to the color grey, and every row between it has a conditional format (when any value is entered in column A as well) to have the row changed to the color red. The issue here is that the Macro code messes up the conditional formatting and uses the conditional formatting of those two cells, which are being dragged down, for those entire filled-down columns! This is what I am starting off with test1.xlsm and this is what I end up with using the macro code below (or doing it manually)
test2.xlsm
Is there a way for the Macro code to bypass this issue?
View 6 Replies
View Related
Apr 2, 2009
I have configured conditional formatting to check valid entries in a dependant list. I used the solution provided by SHG at:
http://www.excelforum.com/excel-prog...ant-lists.html
Now I need to use a macro to activate and deactivate the conditional formatting due to performance issues.
When the formula for data validation includes the indirect funtion I got a compile error and the macro won't run.
View 3 Replies
View Related
Dec 2, 2008
The macro firstly formats the data that is pasted into it from an access database, then it does some calculations to determine when 10 working days from a specific date is, and when 20 working days from the date is (these go in new columns at the end of the data). The macro will also add new columns which say "Not resolved" if there is no date in the Resolution column, "Yes" in the "10 working days met?" column if the condition is met and the same for 20 workings days in a different column. As the colouring etc takes a long time I really wanted to add as conditional formatting to the macro!
how to attach a spreadsheet here then I can show you what the outcome we want is. A point to note is that there is not a set number of rows each time we do this, and I don't just want 1 cell to be coloured - I want to specify which cells in the row are coloured depending on the results in another cell on that row.
View 2 Replies
View Related
Oct 6, 2011
After red filling certain cells based on some conditional formatting, I apply a filter to hide them. Now I need to delete them using a macro script.
View 9 Replies
View Related
Mar 7, 2012
I have a monthly report with over 2,000 entries per column and it is dynamic (number changes monthly). I'm trying to replace individual department names with "department" but keep certain ones the same. For instance- A,B,C,D stay the same but E-Z need to be changed to "department". I first coded an If then macro but was unable to get it to loop and after researching looping realized that it may not be the best option especially with large datasets. Is an advanced filter macro the best option where I filter NOT A,B,C,D and then change the results to department?
View 9 Replies
View Related
Mar 10, 2007
I am trying to write a macro (preferrably within exsting file) that will
A: change file name to specific cell input ( date, got that working)
B: change directory on server to place renamed file in a "Past Production Folder" (Keeps saving on my hard drive)
C: Open a different folder to retrieve a blank copy
D: Change back to main directory to save blank copy
E: Make workbook shared
Gotta get this working quick, program needs to replace for new week production.
View 4 Replies
View Related
Dec 3, 2013
I am having a set of data. Every month I need to filter for some values and replace data in some cells.
In the attached file I have given the data and also the filter conditions and what column I need to change.
creating a macro where in the filters and the changes to be made are in the table. The macro should use these conditions and make the changes.
View 2 Replies
View Related
Sep 16, 2013
A little background on what i am doing. I have a spreadsheet that tracks when i have blown the dust out of our computers. I have set up conditional formatting so that the text turns red after 300 days and the cell turns yellow after 600 days. However, some computers are in high dust environments. I would like the spreadsheet to tell me to blow the dust out of these sooner. see the attached sheet.
dust 1.xlsx
View 2 Replies
View Related
Mar 20, 2013
Is it possible to change the format of cell AI3 based on the format of cell C3 and D3? I have C3 and D3 set to turn red based on what is in cell C2 and D2. I would like the following done:
If AI3=C3 & C3 is red, format AI3 blue
If AI3=D3 & D3 is red, format AI3 blue
Otherwise, leave AI3 unformatted.
Possible???
View 3 Replies
View Related
May 5, 2009
Is there "code" for different formatting in a spreadsheet so you can use an IF statement to do something like:
if(A1=blue background,"Yes","No")
or
if(A1=red text,"Yes","No")
etc.?? But replace "blue background" and "red text" with some sort of number code? I want to compile a list of the items that are formatted with certain background colors and/or text colors and then organize only those items into a chart.
View 5 Replies
View Related
Jul 5, 2013
Any VBA that I can put into a macro that will convert conditional formatting into fixed formatting..? So when the cell contents/formulas are deleted the formatting remains. Assume that the range I want to convert is A1:D200...
View 9 Replies
View Related
Feb 9, 2009
I need to run a loop through a column of values (attachment col B) and when it finds a "J" it will apply conditional formatting to a row of 4 cells directly adjacent. The attachment is a theoretical before & after.
View 2 Replies
View Related
Mar 18, 2014
I am my excel worksheet (excel 2010) I have one cell that changes every day (number). I want this number to open my htm document and replace the same number in a string in the htm and save/close this.
An example:
My htm document is located at C:/ and named XX.htm
The number I want from excel is in cell A1 in sheet1, and the worksheet is located in D:/ named yy.xlsx
And the text(number) I want to replace is in the following string in the htm document, in this string it is 72, next day it can be 30:
src="Bilder/72.png"
View 8 Replies
View Related
Mar 8, 2014
I have data in sheet 1 like below
Custid loc city
123 us newyork
124 uk wales
876 in mumbai
Sheet 2
custid newcustomerid
123 756
124 394
Outputsheet:
Custid loc city
756 us newyork
394 uk wales
876 in mumbai
So it will check sheet1 custid with sheet2 custid. If both matches it will replace custid with newcustid.if cust id not exists it will load sheet1 recprds as usual.
View 1 Replies
View Related
Dec 9, 2008
In a column, there are 4 option for each cell -
"PAYMENT DUE"
"PAID"
"UNDERPAID BY..."
'OVERPAID BY..."
These are filled in by a formula
I would like to make them 4 different colours but excel only allows 3 options
View 14 Replies
View Related
Mar 5, 2009
I have a hard time when it comes to "If then" statements and conditional formatting. I have some data that I am collecting and entering into a spreadsheet for a couple different companies. Once I receive paperwork from those companies for the data collected I mark the data with a blue colored text. I would like to have a second sheet that generates what companies have not sent me their paperwork. "If the data is black text, then generate <name of company> on second sheet." The list is small right now, but as the project continues it will grow very large and it will become difficult to track. I will attach a copy of the spreadsheet for you to see the situation. I would like to learn how to do these types of formulas, is there a tutorial geared towards these types of situations?
View 2 Replies
View Related
Dec 23, 2009
I seem to have a problem using conditional formatting with Vba in Excel 2003
When I run -
View 3 Replies
View Related
Nov 11, 2009
Must admit the R1C1 still confuses me, but somehow I have this working. Currently the RC4 displays in conditional format as $D8 and the RC4 as $C8, but I'm confused at how it knows to start at R8? Is there any way to make the formulas read ="=$D8=""No""" instead?
View 2 Replies
View Related