and the cell name have define to ="rawData!R7C3:R7C7" which the "" stop the rename working I belive.? What I want is to add or reduce extra column into the name depends on macro.
I would like to name a range based on a row number and a column number. I have found the row and column number using this code, but I can't seem to get the rest right.
Sub LastRowCol() Dim intLastRow As Integer Dim intLastCol As Integer Dim ws As Worksheet
I'm trying to define a range to be copied during execution of a macro. The range to be copied must include all contiguous data from a defined starting range to the rightmost column and the bottommost row containing data (boht of which can change depending on input data). I use <End>+<RightArrow> and <End>+DownArrow> to define the range when working in Excel (not under macro control).
I used the macro recorder to define the code for the process described above, with results shown below:
Sub Macro2() Sheets("Source_Info").Select Range("A2:D6").Select Range(Selection, Selection.End(xlToRight)).Select Range(Selection, Selection.End(xlDown)).Select Application.CutCopyMode = False Selection.Copy Sheets("Working_Data").Select Range("A2").Select ActiveSheet.Paste End Sub
When I run the macro, however, the End(xlToRight) and End(xlDown) commands do not have any effect (i.e., the rang is not made any bigger when these statements are executed).
I've used the same code in previous macros (with previous versions of Excel and Windows), and it worked fine. I'm running Excel 2003 under Windows XP Professional now.
1. I need to define a variable range of all the USED cells in a column (starting at row 2 as the row 1 is the header)
2. I need to do this for columns A through to P inclusively (all using the same lastrow reference as that of column A)
3. I need to call the range name by the contents of the header in that column (Row 1)
4. Some of the data in the header row (row 1) contains spaces - can we change this to an underscore for the range name only?
5. Does a range only work for the active worksheet? Because i will have multiple worksheets, all with the exact same information in row 1, but different numbers of rows (and different data as well), but i will need the range defined on each worksheet......
I've found the following code and thought it was it, but it only defines on 1 worksheet, and for some reason only defines ranges for columns 1 and 2. Also it defines the range as A1:A65535 - not the USED range.....
I have written this macro to convert into a csv file to run for all defined named ranges in the activesheet. It run jst perfect when I hit SAVE button and it creates that many different CSV files for each named range.
However I am trying to use same macro in the another file and the problem I am facing is there a lot more named ranges and I want to run the macro for only selected NAMED RANGE. In this case 2 Named Range / 24 Named range.
What part of code do I need to change and to what to make it work for just 2 named ranges ?
Macro to add in a row in a named range, at the bottom of the range. the code i currently add in only to a certain row i need to add into a named range at the bottom.
Sub AddPersonnel() With Sheets("DOR") .Unprotect Password:="techedit" Rows(56).Insert Rows(55).Copy Destination:=Range("A56") .Protect Password:="techedit" End With End Sub
I have a named range that is being updated via a macro. After the update, I want the list to be sorted. The named range is "Projects". This name is not a variable...it is a named range within Excel itself.
Any code to sort this at the end of my existing macro.
I have a named range "ABC", range is ("A1", "A3", "A5"). Now I need to use Macro to extend the range to ("A1", "A3", "A5", "A7"), that is, adding "A7" to the existing named range "ABC".
In my sheet I have a range on the go called 'cells_replen', I then need to search through the sheet and if a cell matching a given criteria is found I want to add it to the named range. The idea is that when I've done all the adding I can just select the range and then go back through the cells later on without searching for them all over again. The first code that declares the first cell I need in the range is:
Let's say you have a named range, Rng1, which consists of cells A1 & A2. In vba how would you report back what, if any, named range the following cells resides:
Code] .....
here are multiple named ranges so using intersect is not feasible. Essentially, through code, I will be given a range and I need to determine if that range if part of a named range.
This seems really basic, but I can't seem to find it...
Using Visual Basic, if I have a named range, lets say like "NAMEDRANGE", how can I refer to cells in that range by their position in the range? For example, if I want to refer to the cell in the 2nd row and 3rd column of the range.
Also is their an easy way to refer to the first(top-left) cell in a named range?
I need to create multiple copy of workbook from a named range called - CoCode - range is on sheet called - Data - cell range - L2:L37. Problem is that i want each workbook named as the name that is in cell range (CoCode). Also in same workbook in a sheet called - Company Summary , in cell J1 there is validation list that refers to range same (Codode) i want that to change in each workbook.
I.e 1st copy of workbook name is equal to 1st reference in range CoCode and same 1st reference in Validation list in - Company Summary - Sheet in cell J1. Also selecting Validation populates several sheets in workbook to information revelant to that company code selection in cell J1, - there are no external links to this document-
I'm having trouble calling a defined range within a VLOOKUP function in VBA. If the named range is located on the same sheet within which you are running the macro, everything runs fine and all is well in the world.
However, after I relocated the range to a separate sheet (a 'SourceData' sheet to tidy up the user interface sheet), I was getting the following error message:
Method 'Range' of object '_Worksheet' failed
The name is correctly defined - Range("DaysInYear").Select still picks up the correct selection - it's just the VLOOKUP will no longer function correctly.
Here is part of the macro's For I = 1 To NumberOfDays Range("A1").Value = DateAdd("d", -(I - 1), EndDate) If Application.VLookup(Range("A1"), Range("DaysInYear"), 3, False) = 1 Then If Application.VLookup(Range("A1"), Range("DaysInYear"), 4, False) = 0 Then ActualNumber = ActualNumber + 1 End If End If Next I
I need to create a named range on multiple sheets with the same named range & i cant figure out how to do this. EG :- I want to create a named range called "_SubUnitRows" on sheet1 starting from "A1:A50" & other named range again called "_SubUnitRows" on Sheet2 starting from "A1:A25" ...
I'm trying to make my named ranges remember the values of the last active cells used within another named range. The purpose of this is to make my charts dynamically change dependant on two criteria selected. My spreadsheet currently updates itself as and when I change the active cell within a single named range, dynamically changing the chart data by using Lookup based on the active cells value. However I want to get away from having several charts showing, I would like to have a single chart which dynamically changes based on a second selection. So the first selection is for a department (Facility) which changes the chart data relevant to that department, the second selection is to dynamically change the chart shown for the pre selected department.
Picture2.jpg
Using the following code when updating just one criteria with several charts
VB: Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Not Application.Intersect(ActiveCell, [MeasureType]) Is Nothing Then [valMeasurePicked] = ActiveCell.Value [code].....
which works fine but I'm not sure how to add a second selection criteria because my code uses Activecell. I thought that the VBA needed to set the last used value of a range as a variable and therefore allow the second criteria to be selected but am not sure how to put it into practice.
I want to define a Range() in VBA. have cell1 and Cell2 in the format of rows and cols. ie. Cell1 = Row 1, Col 2. Cell2 is dynamic, can be sometimes row100, Col200, or Row23, Col 1000. May i know how to define it in VBA?
if I can use a named criteria as well as a named range. In essence what I am looking to do is count certain cells that meet the criteria in a certain named named range,
I would like to combine List1 and List2 into a 3rd named range called List3. I was wondering if this were possible without using any additional cells/columns (i.e. I don't want to use Column C like in the example shown in the link above).
I have two columns containg the arrival and departure hours of workers. From these columns I must define the workshift by specifiyng the time range for each shift. AZ contain the arrival hours while BA the departure.
The formula I use doesn't return the results correctly because some shifts are almost the same. i.e: if shift one starts (arrival hours) between 05:00 and ends at 12:59 and shift 1-2 starts at 08:00 and ends at 23:59 then it will go with the first shift even though the times in range belong second shift.
Dim DRange As String Dim ERange As String Dim SRange As String EndRow = Range("A65536").End(xlUp).Row DRange = Range("D1", "Z" & EndRow) ERange = Range("E1", "Z" & EndRow) SRange = DRange
how to define the end of a range using a variable determined by a rng.Rows.Count command (or anything else)? Is this even possible? Here is what I currently have:
Set rng = Range("A1:A10000") For i = rng.Rows.Count To 1 Step -1 If rng.Cells(i).Value = "0" Then rng.Cells(i).EntireRow.Delete Next
I'd like to define the end of the range with more accuracy than I'm currently doing.
I am searching for data, upwards from cell A1400. Once I find data (cell > 0), I need to count up 27 rows and then select these rows for columns A to E. Then I want to copy this block of data and paste it. I have been having difficulty with the selection of a block of data which will be in a different position depending upon the data used. The code I am using is below. The two lines that I need to replace with a Variables cell range reference are:
Sub CalculateATR() Sheets("Data").Range("a1400").Select Do If ActiveCell.Value > 0 Then ActiveCell.Select Exit Do Else ActiveCell.Offset(-1, 0).Select End If Loop Until ActiveCell.Value > 0
Range("A1268:E1242").Select Range("A1268:E1242").Activate Selection.Copy Range("G5:K31").Select ActiveSheet.Paste Else End If End Sub
how do you go about referencing a cell by using a value of an integer? For example, I want to select cell A5. I have the number i= 5 (in my vba code) and I want to use that together with the row letter A.
is there a simple way to do a vlookup (or any other more appropriate formula) using the value of another cell to define the named range relevant to that lookup.
eg I will have two different ranges for fitness performance levels, each of these will be named "Male" and "Female".
I would like to do a lookup based on a formula as follows: Try this formula. Column letter & Row number are for example only. Array formulas will have curly brackets {} emcompassing the ENTIRE formula. You do not add these, you Enter the formula with Ctrl+Shift+Enter and Excel will add them (details: Array formulas). Many more Excel Formulas Z100 =vlookup(D4,NAMED RANGE,2,false)
the Named range would be a value in the same row ie B4 - being Male or Female
so I am hoping for something like Try this formula. Column letter & Row number are for example only. Array formulas will have curly brackets {} emcompassing the ENTIRE formula. You do not add these, you Enter the formula with Ctrl+Shift+Enter and Excel will add them (details: Array formulas). Many more Excel Formulas Z100 =vlookup(D4,B4.Value,2,false)
otherwise I could just use an If and do something like: Try this formula. Column letter & Row number are for example only. Array formulas will have curly brackets {} emcompassing the ENTIRE formula. You do not add these, you Enter the formula with Ctrl+Shift+Enter and Excel will add them (details: Array formulas).
Many more Excel Formulas Z100 =if(B4="Male",vlookup(D4,Male,2,false),vlookup(D4,Female,2,false) )
I need to be able to work out a percentage based on a value range. ie.
Cell D2 to D5 will define the percentages (so I can adjust it and play)
D2 = 18% D3 = 15% D4 = 13% D5 = 10%
I need to work out:
If the value in cell A10 is between 11 and 200 calculate on D2, if between 201 - 500 calculate on D3, if between 501 - 2000 calculate on D4 ect ect
Cells A10 to A100 will have some figures put in them.I then want to calculate the %value used based on weather the figure in one of the A10 to A100 cells falls in a range. The data being put into the cells in column A will vary from report to report.
I am working on some code to copy data from one sheet to another, but I'm not sure if I'm going about defining the copy range correctly. I would like it so that the user can highlight a range of cells on the sheet between A3 and F last row (last row based on col C). However the user should be able to highlight rows in any column between A and F, and they could highly the records with just one column or multiple columns. It should take the row numbers of the highlighted range and use the that as the row number to extract the data from.
[Code] ........
Im currently getting runtime error 13 on 'CopyRange = Selection.Rows'
'CopyRange = Selection.Row' returns the single row number for the first cell in the selection, but i need the range of all the rows in the selection.