Define Range Based On Named Row And Column
Jul 26, 2006
I would like to name a range based on a row number and a column number. I have found the row and column number using this code, but I can't seem to get the rest right.
Sub LastRowCol()
Dim intLastRow As Integer
Dim intLastCol As Integer
Dim ws As Worksheet
For Each ws In Worksheets
intLastRow = ws.Cells.SpecialCells(xlCellTypeLastCell).Row
intLastCol = ws.Cells.SpecialCells(xlCellTypeLastCell).Column
View 3 Replies
ADVERTISEMENT
Feb 7, 2007
how to set up an array within a worksheet
View 3 Replies
View Related
Dec 29, 2009
I am trying to define a number of ranges in different sheets using VBA I am using the follwoing syntax but I am getting a 1004 error:
Private Sub Workbook_SheetActivate(ByVal Sh As Object)
ThisWorkbook.names.Add Name:="Test", RefersTo:=Worksheets("Sheet1").Range("E6", Range("E6").End(xlDown))
End Sub
As long as I have sheet1 active, it works. If I have another sheet active and change smt, i get the error.
The code is located in the ThisWorkbook object.
View 6 Replies
View Related
Nov 21, 2006
How can I redefine name of the cell? This is what I have tried and not work
intWDColumn = Range("rngWaterDepthStart").Column + 3
intWDColumn = intWDColumn + 1
strNameRange = "rawData!R7C3:R7C" & intWDColumn
ActiveWorkbook.Names.Add Name:="rngWaterDepthStart", RefersToR1C1:=strNameRange
and the cell name have define to ="rawData!R7C3:R7C7" which the "" stop the rename working I belive.? What I want is to add or reduce extra column into the name depends on macro.
View 4 Replies
View Related
Apr 10, 2013
I am trying to calculate some averages. What I have is 3 columns of data in A, B, C, also the "tasks" in A are in named ranges ex: "Award Contract" is a named range - "Task_Award" and "Confirm Updates" is a named range - "Task_Updates". I've attached a sample excel sheet.
I'd like to be able to create a macro to evaluate column A, and for every row in range "Task_Award", give me the average of the corresponding cells in column C and put it in the same range of cells in column B , then, for every row in "Task_Confirm" then give me the average of the same range of cells in column C and place the result in the same range of cells in column B. This is my very first post so I hope I am doing this correctly. I have 77 of these task ranges to evaluate and it will take a long time to do it manually. I'm thinking of a loop function.
View 1 Replies
View Related
Dec 30, 2007
I have a worksheet that has hourly data. So Column C of this worksheet looks like
1
1
1
1
2
2
2
3
3
3
3
3
3
What I want to do is, given an hour h, automatically create a named range that contains all the rows such that the value of Column C is equal to h.
View 9 Replies
View Related
Mar 9, 2008
I want to define a dynamic named range based on the last date in a range (AE4 down). Unfortunately there are gaps in this range where no date is in a cell.
View 5 Replies
View Related
Nov 27, 2013
I need to be able to work out a percentage based on a value range. ie.
Cell D2 to D5 will define the percentages (so I can adjust it and play)
D2 = 18%
D3 = 15%
D4 = 13%
D5 = 10%
I need to work out:
If the value in cell A10 is between 11 and 200 calculate on D2, if between 201 - 500 calculate on D3, if between 501 - 2000 calculate on D4 ect ect
Cells A10 to A100 will have some figures put in them.I then want to calculate the %value used based on weather the figure in one of the A10 to A100 cells falls in a range. The data being put into the cells in column A will vary from report to report.
I'm trying to automate the calculations :
View 6 Replies
View Related
Nov 3, 2008
I'm trying to define a dynamic column range call 'Cost'
If it starts in Column C, row 4 [C4]. I want the range that to go down to the Row I have defined as 'subtotal'
The user will be able to insert new rows above 'subtotal'
How can I define Column C4 so that any new row added will be including in the defined row range 'Cost'?
View 9 Replies
View Related
May 20, 2006
The problem that I am having today is defining a range object that cannot include null cells. If it does include Null cells then the filterwill fail. the cells that I need to define are all in a cohesive unit. the other thing to know is that the cells that are not null will never be mixed in with cells that are null. so for instance you might have a range of cells from one to 100, the first 50 might be full. the last 50 would all be null. in that situation I would need to loop through those cells to define a range object that would just see the first 50 cells ....
View 6 Replies
View Related
May 31, 2006
I want to calculate a weighted average but I need it to only calculate on the months to date. I have a data validation drop down on a title page that is toggled to the current month each time a report is needed to define what months have actuals. I bring in data for all the months but only the current months have actuals. I need to calculate the weighted average on ONLY the ACTUALS. How can I set the ranges for sum product based on the data validation list on the title page?
View 4 Replies
View Related
Nov 25, 2013
Rather than having to give it a range, I'd like to have a generic range giving me room to add or subtract values in the column without changing this statement.
Code:
Worksheets("Sheet1").Shapes("Combobox2").ControlFormat.ListFillRange = _
"O2:O14"
View 3 Replies
View Related
Apr 28, 2014
I have written this macro to convert into a csv file to run for all defined named ranges in the activesheet. It run jst perfect when I hit SAVE button and it creates that many different CSV files for each named range.
However I am trying to use same macro in the another file and the problem I am facing is there a lot more named ranges and I want to run the macro for only selected NAMED RANGE. In this case 2 Named Range / 24 Named range.
What part of code do I need to change and to what to make it work for just 2 named ranges ?
View 6 Replies
View Related
Dec 21, 2006
how to use SUM Formula a column from within a Named Ranges or Dynamic Named Range?
For example, if the range name "MyData" refers to the address: A1:G10, how could I sum all the numbers in column G of that range where column A meets certain criteria.
Eg., Column A holds fruit names:
Apple
Orange
Banana
Apple
and column G holds quantities of the particular fruit. I'd like to sum column G (quantity) for only those quantities that match "Apple" in column A.
View 3 Replies
View Related
Jun 13, 2008
I have a workbook containing two worksheets - Sheet 1 being my "data entry sheet" and Sheet 2 is a sort of summary report containing multiple named ranges (all grouped according to similar values in a cell i.e. all cells containing 1-1 is named GRP1, all cells containig 1-2 is named GRP2). Basically, my workbook looks like this:
Sheet 1
A B C D
1 Lea Female 1-1 Lea Wells
2 Leo Male 1-2 Leo Anderson
Sheet 2
A B C D
1 Anne Thomas Female 1-1
2 John Doe Male 1-1
4 Jimmy Beads Male 1-2
5 Mary Fox Female 1-2
Hence, when I enter the data as shown in Sheet 1, Sheet 2 should look like this:
A B C D
1 Anne Thomas Female 1-1
2 John Doe Male 1-1
3 Lea Wells Female 1-1
4 Jimmy Beads Male 1-2
5 Mary Fox Female 1-2
6 Leo Anderson Male 1-2
View 4 Replies
View Related
Nov 28, 2013
I'm using dynamic named ranges a lot recently. One thing that bothers me is that I have to do so many for one range.
For example I have a named range from A1:G30. Now I can use this named_range to do vlookup etc. but when I for example want to use the match with the index function I have to define a new range because for the match function to use it need only one column or row. Is there some hidden command I could use like named_range_row1 ? This would make it so much easier to read the code and I dont have to construct so many named_ranges.
View 3 Replies
View Related
Nov 11, 2011
I have a Worksheet Change event that when a cell (H5) is changed, it does a search for the value on another sheet. When it finds that value, I would like it to find the intersection of the column it found the value in and a named range.
Here is what I have so far. It works when I use the
Code:
.Range("H4") = c.Offset(15)
, but not the
Code:
.Range("S8") = isect.Offset(3)
.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
On Error Resume Next
UpperCase Target
'Fills in 60 Point form when part number is changed
'Sheets("60 POINT").Unprotect
[Code] ........
View 9 Replies
View Related
Feb 17, 2007
I would like to create a named range in VBA for column A, which is a sum of B and C. The problem is that A can have 0 as a value. What I would really like to do is define the named range in column A as A2 to the last column with a value in column B(B10) which would make the named range in column a A2:A10.
ABC
61555560
00
1250120050
725725
00
850850
1919
7216720016
995995....
View 2 Replies
View Related
Jul 22, 2014
I got a very technical sheet which needs your experience to work.
open the attached file below to see the workbook.
It has 3 different sheets. "RESULT", "INPUT" and "SWITCH"
On "RESULT" Cell (O11) is where the person would put a Reference.
This reference is then checked on the "INPUT" sheet column A.
From the first cell it appears in Column A, until the last cell it appears in Column A should be the Row Range (Blanks included).
But I want that range (Column A to G) to be copied to "Switch" sheet. Pasted in Cell A1 downwards.
In the "SWITCH" sheet I have already given all the GREEN Cell formated areas a name - INFO.
I want all the data in INFO to be inserted into "RESULT" sheet between row 18 and 19.
I have colour coded most of the areas for you.. And added a button from which the Macro / VBA should run when clicked.
View 1 Replies
View Related
Jan 20, 2008
I am quite new on this forum.
I would like a dynamic range to be multiplied with 2. The Range is always start in cell H14 to P?
I have multi checkbox in column F,
So here is an eksampel: If checkbox in F4 is true then Range H4:P4, should by multiplied with 2 else if the chekbox is FALSE, then only multiply with 1.
I want to entry data in the Range H14:P? by this code
Private Sub Worksheet_Change(ByVal Target As Range)
'Do nothing if more than one cell is changed or content deleted
If Target.Cells.Count > 1 Or IsEmpty(Target) Then Exit Sub
View 9 Replies
View Related
Apr 22, 2014
I am attempting to obtain the last non-empty row in a column of a spreadsheet by using the following formula
=SUMPRODUCT(MAX((A:A<>"")*(ROW(A:A))))
This works fine.
However, I'd like to make it more dynamic and be able to obtain a usable column reference (i.e., the A:A portion of the formula) from a named range (single cell).
View 1 Replies
View Related
Aug 24, 2009
I have some dynamic named ranges in sheet1, and in sheet2 I have data validation dropdown list which has the names of all the DNR's in it.
What I want it to do (in sheet3, no less) is for the user to be able to pick a named range from the dropdown list, and have a particular column in sheet3 then display that entire named range.
I have made a 'data' worksheet which is the source for the data validation in sheet2. Each item in the list identically matches the name of each of the named ranges. I was hoping to be able to use some form of =INDIRECT but alas, no such luck.
So it's almost like a copy and paste function I'm after, where:
If you pick "Schedule_From" out of the DD-list, then DNR 'Schedule_From' is what is pasted in Column B in Sheet3.
DON'T want to use a PivotTable.
View 9 Replies
View Related
Apr 28, 2009
Can you use Row & Column numbers in a Formula the way you can in VBA?
I want to do the same as Range(Cells(5,2)) in VBA EXCEPT in a Formula
because I want to use named ranges for the Row & column entries. (And I don't want to have to run a macro every time a change is made. The spreadsheet is huge enough already. It's slow on my machine & I have the biggets baddest PC in the company!)
Using Formulas only, (not VBA) I would like to create a Dynamic Named Range, LastUsedRow, which is the ROW NUMBER of the Last Used Cell in Column C
(it would = 470)
Also I have an existing Named Range HeaderRowNum (it = 16)
Currently I have a LOT of formulas like:
=SUMPRODUCT(($E17:$E470)*(--(CO17:CO470>0)))
problem is any new data must be added between Rows 17 & 470
So I would like to create dynamic new forumlas to read like:
SUMPRODUCT( (Cells(HeaderRowNum+1,5) : (LastUsed Row,5)) * (--(Cells(HeaderRowNum+1,93) : (LastUsed Row,93))>0) )...............
View 5 Replies
View Related
Jun 21, 2014
using excel 2010
I created named range selection called "Contractors".....how do I put the drop down lists in a column of cells now?
View 2 Replies
View Related
Sep 19, 2008
I had an idea that I could use the level of indent in the first column to provide the name for the range. The easiest way to explain is with the example spreadsheet I have attached
Cells C5:C10 show how the naming convention should look like, basically Indent Level 0 returns a prefix (Sheet_Name_Prefix) and its corresponding row entry in Column A. Level 1 should return the last Level 0 name and its corresponding row entry in Column A.
I had a go at the code and it works for Level 0 but I can't get it to put to Level 1.
Sub Test()
'Dimension Variables
Dim RowTitleEntries As Integer
Dim NameLoop As Integer
Dim IndentLevel As Integer
'Set the value of RowTitleEntries
RowTitleEntries = 6
View 3 Replies
View Related
Feb 10, 2013
I have a worksheet called "Lookup" with several dynamic named ranges (each is 1 column wide) including facility, department, shift, etc. On a summary worksheet in the same workbook I want users to use a dropdown or combo box (don't care what type) in cell B2 to select a facility and then based on their selection, copy the department named range data and paste it into the summary sheet beginning in cell A5 and paste the shift named range data into the summary sheet beginning in cell B5.
Example: user selects "AR Plant" from the dropdown or combo box and the data from the "AR_Rpt" named range is pasted into cell A5 and the "AR_Shift" named range is pasted into cell B5.
View 9 Replies
View Related
Mar 14, 2012
I have a named range of values on Sheet2 (GPI). Sheet1 is an OLAP pivot table containing row label (GPI 14) and values (Net Rx Count) only.
Unfiltered this list is over 7,000 rows. I need VBA code to display only those rows where the GPI 14 value matches any value in the named GPI range on Sheet2.
In other words how can I display the select rows without manually selecting the items of interest AND without manually hard coding the values in the code as they will change.
Below is 1 of the many codes I tried. This appears to be the most intuitive but I get an 'invalid procedure" error at Set my PivotTable...
'Sub PivotAnalysis()
'
Dim myPivotTable As Excel.PivotTable
Dim myPivotField As Excel.PivotField
Dim myPivotItem As Excel.PivotItem
[Code]....
View 4 Replies
View Related
Aug 16, 2014
Let's say you have a named range, Rng1, which consists of cells A1 & A2. In vba how would you report back what, if any, named range the following cells resides:
Code] .....
here are multiple named ranges so using intersect is not feasible. Essentially, through code, I will be given a range and I need to determine if that range if part of a named range.
View 5 Replies
View Related
Aug 12, 2009
I have two sheets. Sheet A has a list of folders. This list is updates dynamically every time the sheet is opened. I have another sheet (sheet B) which has a list of all the files in the sub-folders, listed with the folder name at the top of the column and the files within in the column underneath with hyperlinks to them. The goal is to be able to navigate to the folders on sheet A and to click there to go to the column where all the files in that folder are linked to. What I need is a macro that will search a column and for every cell that has text in it and create in the column directly to the right a hyperlink to the appropriate cell in the top row in sheet B that has the same name as the text in the cell on sheet A that it finds. I already have the macros for listing the folders on sheet A and the macro for listing all the files in the sub folders in sheet B and they work fine. The goal is a link list which is dynamic and that recreates itself no matter what I add to the folders.
For instance, let’s say there is a folder timesheets. If I add a sub-folder called
accounting to the folder Sheet A scans then timesheets would be bumped down one spot on the list, so the macro has to look dynamically for the text in the column on sheet A.
Also the addition of the new folder would move the order of the columns on sheet B, since both lists are alphabetical. So the link generation macro would need to search row 1 of Sheet B to find the match for the text in the cell to the left of where the link would be generated and create a link to the top of that column. I’ve looked all through the site and not found something that I can even modify to do what I need.
View 9 Replies
View Related
Jun 2, 2006
I need to create a named range on multiple sheets with the same named range & i cant figure out how to do this. EG :- I want to create a named range called "_SubUnitRows" on sheet1 starting from "A1:A50" & other named range again called "_SubUnitRows" on Sheet2 starting from "A1:A25" ...
View 2 Replies
View Related
