I have a named range "ABC", range is ("A1", "A3", "A5"). Now I need to use Macro to extend the range to ("A1", "A3", "A5", "A7"), that is, adding "A7" to the existing named range "ABC".
View 1 RepliesI have a range of weekly data that I need to copy into another workbook, paste it below the data that already exists there and then delete the data from the original workbook. I would love to do this with vba but after hours of searching on how to do this my brain is frazzled.
I have 50 workbooks that I need to import weekly into one master sheet (Master.xlsm) but they need to be done individually after the weekly data has been checked. The master sheet will therefore have existing data and the new data needs to be appended at the bottom. Also column A will be blank in both workbooks so to find the last used row it will need to look in column B.
The number of rows in the weekly sheet will also vary rather than be a fixed range so I guess the last used row will also need to be found there too.
The attached file is a cut down version of my working file showing where the data starts on Row 14, I won't need to copy the headings.
Example file 21.03.xlsm
I have been working on a macro that compares a existing list of data to an updated list of data and then either moves any data not on the new list over to a completed tab (followed by deleting the record on the existing sheet), and then adds any items not on the existing sheet, but which appear on the new list, to the existing list.
I have come across a stumbling block, i have managed to identify on the existing list the rows of data that have been removed from the new list and therefore need to be moved over to the completed tab, but when i select the data it selects the header row aswell (which will always remain the same row). Obviously this then pastes the header row aswell, and also i can't seem to get it to paste in the new sheet to the next available row (i.e this will be used daily and i don't won't to overwrite the infor already in the completed tab). the next issue i have is then when i go back to existing sheet to delete the data i just copied across, as the header was initially select this also gets deleted.
The code below, is the complete code, including filtering, copying some forumals etc. The area i am getting stuck on is highlighted in red:
Sub Update()
Dim bottomrow As Long
Dim My_Range As Range
bottomrow = Cells(Rows.Count, "C").End(xlUp).Row
Set My_Range = Range("A1:Y" & bottomrow)
[Code] .....
I am trying to apply named cell from another worksheet to existing formula.
For example I have a formula in sheet2 which looks like =sheet1!A1+sheet1!B1. I then subsequently name sheet1!A1 = Jan and sheet1!B1 = Feb. Thinking that if I apply these names the formula in sheet2 would look like =Jan+Feb. However I get the message "Microsoft Office Excel cannot find any references to replace" when I try to apply the names using Excel menu "Insert - Name - Apply".
I'm trying to move data from a primitive user form to another sheet acting as a DB. I will further pivot the data in a third sheet to boil up results.
Here is the primitive user form - or desired data from the user form: ...
Macro to add in a row in a named range, at the bottom of the range. the code i currently add in only to a certain row i need to add into a named range at the bottom.
Sub AddPersonnel()
With Sheets("DOR")
.Unprotect Password:="techedit"
Rows(56).Insert
Rows(55).Copy Destination:=Range("A56")
.Protect Password:="techedit"
End With
End Sub
I can't get the Displayalerts = False to work as it's supposed to when analyzing data running the correlation add-in. (ATPVBAEN.XLAM!Mcorrel)
For each loop the alert is displayed which I don't want it to.
The code below is just an example. I have several rows which I will loop through and therefore the Displayalerts=False must work.
Sub test4()
With Application
. ScreenUpdating = False
.DisplayAlerts = False
.EnableEvents = False
End With
I have a named range that is being updated via a macro. After the update, I want the list to be sorted. The named range is "Projects". This name is not a variable...it is a named range within Excel itself.
Any code to sort this at the end of my existing macro.
I am trying to define a number of ranges in different sheets using VBA I am using the follwoing syntax but I am getting a 1004 error:
Private Sub Workbook_SheetActivate(ByVal Sh As Object)
ThisWorkbook.names.Add Name:="Test", RefersTo:=Worksheets("Sheet1").Range("E6", Range("E6").End(xlDown))
End Sub
As long as I have sheet1 active, it works. If I have another sheet active and change smt, i get the error.
The code is located in the ThisWorkbook object.
How can I redefine name of the cell? This is what I have tried and not work
intWDColumn = Range("rngWaterDepthStart").Column + 3
intWDColumn = intWDColumn + 1
strNameRange = "rawData!R7C3:R7C" & intWDColumn
ActiveWorkbook.Names.Add Name:="rngWaterDepthStart", RefersToR1C1:=strNameRange
and the cell name have define to ="rawData!R7C3:R7C7" which the "" stop the rename working I belive.? What I want is to add or reduce extra column into the name depends on macro.
- Construct a macro to import a csv-file to my worksheet named "Info". The data in the .csv-file should start in row A5 in my worksheet.
- If the worksheet "Info" already has data, I want to overwrite the existing data with the new data starting in row A5
The directory of the csv-file is C:Testmycsvfile.csv
In my sheet I have a range on the go called 'cells_replen', I then need to search through the sheet and if a cell matching a given criteria is found I want to add it to the named range. The idea is that when I've done all the adding I can just select the range and then go back through the cells later on without searching for them all over again. The first code that declares the first cell I need in the range is:
ActiveWorkbook.Names.Add Name:="cells_replen", RefersTo:=Range("A3")
That works fine, I can also manually add cells into the range as below:
ActiveWorkbook.Names.Add Name:="cells_replen", RefersTo:=Range("cells_replen, A9")
No problem if I want to just add 'A9' but because I'm searching through the sheet, I need some way to just add 'ActiveCell' or similar.
Let's say you have a named range, Rng1, which consists of cells A1 & A2. In vba how would you report back what, if any, named range the following cells resides:
Code] .....
here are multiple named ranges so using intersect is not feasible. Essentially, through code, I will be given a range and I need to determine if that range if part of a named range.
This seems really basic, but I can't seem to find it...
Using Visual Basic, if I have a named range, lets say like "NAMEDRANGE", how can I refer to cells in that range by their position in the range? For example, if I want to refer to the cell in the 2nd row and 3rd column of the range.
Also is their an easy way to refer to the first(top-left) cell in a named range?
I've already found a TON of threads about this process but nothing that matches specifically what I'm trying to do.
I have a spreadsheet that I'm using to auto fill other tabs with data that only matches specific criteria. Here's what I'm looking to do:
Columns I, J, K, and L may be marked as either Y or N (or blank). I have different sheets that require 1, 2, 3, or 4 of those columns to match Y. For example, on sheet 2 I want to copy the entire row if there's a "Y" match on column I and J. On sheet 3 I want to match "Y" against, I, J, and K. Sheet 4 I need to match only L, etc.
I need the data copied into the existing sheets to start on row 7. I have other data on rows 1-6 that cannot be moved.
I'm running Excel 2007.
I have attached excel with the logic I am using, but I have a problem and needed logic to update to make sure it is not inserting same data (duplicate data).
Please update the logic so that if it is having same data in sheet 3 it should not insert or delete duplicate.
Code:
Public Sub CopyData()
Dim ws As Worksheet, bi As Byte, vData(1 To 9), bi1 As Byte, vData1(1 To 9), bi2 As Byte, vData2(1 To 9), bi3 As Byte, vData3(1 To 9), bi4 As Byte, vData4(1 To 9)
Set ws = Sheets("Sheet2")
For bi = 1 To 9
[Code] .........
I have 30 worksheets in a workbook in which the first sheet is called summary. The summary sheet has 29 formulas with all named ranges, so one named ranged per worksheet. The issue I have is when i clear old data and add new data every month, the named range changes on some worksheets not pointing to the correct range as previous month file even if I have $
I need to create multiple copy of workbook from a named range called - CoCode - range is on sheet called - Data - cell range - L2:L37. Problem is that i want each workbook named as the name that is in cell range (CoCode). Also in same workbook in a sheet called - Company Summary , in cell J1 there is validation list that refers to range same (Codode) i want that to change in each workbook.
I.e 1st copy of workbook name is equal to 1st reference in range CoCode and same 1st reference in Validation list in - Company Summary - Sheet in cell J1. Also selecting Validation populates several sheets in workbook to information revelant to that company code selection in cell J1, - there are no external links to this document-
I'm having trouble calling a defined range within a VLOOKUP function in VBA. If the named range is located on the same sheet within which you are running the macro, everything runs fine and all is well in the world.
However, after I relocated the range to a separate sheet (a 'SourceData' sheet to tidy up the user interface sheet), I was getting the following error message:
Method 'Range' of object '_Worksheet' failed
The name is correctly defined - Range("DaysInYear").Select still picks up the correct selection - it's just the VLOOKUP will no longer function correctly.
Here is part of the macro's
For I = 1 To NumberOfDays
Range("A1").Value = DateAdd("d", -(I - 1), EndDate)
If Application.VLookup(Range("A1"), Range("DaysInYear"), 3, False) = 1 Then
If Application.VLookup(Range("A1"), Range("DaysInYear"), 4, False) = 0 Then
ActualNumber = ActualNumber + 1
End If
End If
Next I
Is there any way to use a Named Range in the "Source" field in a Data Validation? I have multiple sheets in a workbook that have the same layout, and I am using alot of different Data Validations. My problem is that whenever I need to change, or add a choice to one of these, I have to go to each sheet and change the Data Validations that are effected by that change. Is there a way to use a "Named Range" or something to put all of my acceptable choices, for that Data Validation, in one spot. And make any changes I had to that field.
View 2 Replies View RelatedFiltering data using named range
Code:
Sub FilterNamedRange()
Sheets("Des").Range("A2:E10000").Delete
Sheets("BASE").Range("A1:E10000").AdvancedFilter _
Action:=xlFilterCopy, _
CriteriaRange:=Sheets("cri").Range("Extract"), _
CopyToRange:=Sheets("Des").Range("A1:E1"), _
Unique:=True
End Sub
I have created a macro (data on the left hand side) that allows me to copy data and paste it into an sql file. The problem i am having is that the data varies (e.g. data on the right) so this doesnt actually work. i was thinking of naming the values within the name ranges and then writing code to see if i can copy particular named range values but i dont know if this will work.
View 9 Replies View Relatedneed to create a macro that inserts 3 rows below each existing row of data and simply copies and pastes that data into each of the empty rows before moving on to the next unique row and doing the same thing again.
This is what I have so far, but I can't seem to get the loop right.
Rows("2:2").Select
Do
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
activecell.Offset(-1, 0).Select
Range(activecell, activecell.Offset(0, 5)).Copy
activecell.Offset(1, 0).PasteSpecial
activecell.Offset(1, 0).PasteSpecial
activecell.Offset(1, 0).PasteSpecial
Selection.Offset(1, 0).EntireRow.Select
Loop
I have a cell for which I need the only options for data to be entered from a list in two different tabs from which I understand cant be done but is it possible to have two drop down options for the same cell?
The attached spreadsheet should explain this slightly better...
I have a range of data that is compiled from various cells that I have named as Range1. I then have another named range - Range2 which should be items selected from range1 and copied into range2. This is to enable other work to take place.
I have created an example userform with Range 1 shown but do not know the code to copy it over using a command button. Range 1 should not change. Also vice versa if possible i.e. remove the selected item from Range2 with another button.
I have a named range TOT_BUDGET. We use the current month number to access this range's index for current budgets.
=INDEX(TOT_BUDGET,3)
My quandary is that I need to calculate the YTD budget for one of our dashboards. So, I need to get months 1, 2, and 3 and SUM them. Next month I'll need to get 4 months, etc...
I've looked at SUMIF, but it needs to match against some sort of criteria... I don't have any numeric month labels on the budgets page. I cannot figure out what range/array I would match the month number to.
Now, I know the easy way would be to put a month number at the head of each column, reference that array and do the SUMIF. Blech.
Ideally, I would love to just be able to say =SUM(INDEX(TOT_BUDGET, 1-3)). Is there an Excel function that will let me select an array slice?
------------------------------
In addition, we are getting the Total Sales number out of Great Plains via an SQL query. We summarize many accounts using a pivot table. We then access this table by using the GETPIVOTDATA function.
GETPIVOTDATA("NETCHANGE",TSALES,"FISCALYEAR",CurrYear,"FISCALPERIOD",CurrMo)
Again, how can I do a total YTD?
Is there a way I can do something similar to a foreach loop in the cell formula? I'd like to avoid macroland with this if possible.
I need to create a named range on multiple sheets with the same named range & i cant figure out how to do this. EG :- I want to create a named range called "_SubUnitRows" on sheet1 starting from "A1:A50" & other named range again called "_SubUnitRows" on Sheet2 starting from "A1:A25" ...
View 2 Replies View RelatedI'm trying to make my named ranges remember the values of the last active cells used within another named range. The purpose of this is to make my charts dynamically change dependant on two criteria selected. My spreadsheet currently updates itself as and when I change the active cell within a single named range, dynamically changing the chart data by using Lookup based on the active cells value. However I want to get away from having several charts showing, I would like to have a single chart which dynamically changes based on a second selection. So the first selection is for a department (Facility) which changes the chart data relevant to that department, the second selection is to dynamically change the chart shown for the pre selected department.
Picture2.jpg
Using the following code when updating just one criteria with several charts
VB:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Not Application.Intersect(ActiveCell, [MeasureType]) Is Nothing Then
[valMeasurePicked] = ActiveCell.Value [code].....
which works fine but I'm not sure how to add a second selection criteria because my code uses Activecell. I thought that the VBA needed to set the last used value of a range as a variable and therefore allow the second criteria to be selected but am not sure how to put it into practice.
If I have two cells and a named range mexico
A1, A2.
A1 contains the string: "mexico"
A2 is the cells that has required data validation (drop down list).
I want A2's validation reference to be dynamic, in the sense that I can it reference it to A1; converting the string "mexico" to a named range mexico
I tried inputting = INDIRECT(A1) into A2
But I lack clarity in my understanding of referencing.
What is the correct procedure here.
I got a very technical sheet which needs your experience to work.
open the attached file below to see the workbook.
It has 3 different sheets. "RESULT", "INPUT" and "SWITCH"
On "RESULT" Cell (O11) is where the person would put a Reference.
This reference is then checked on the "INPUT" sheet column A.
From the first cell it appears in Column A, until the last cell it appears in Column A should be the Row Range (Blanks included).
But I want that range (Column A to G) to be copied to "Switch" sheet. Pasted in Cell A1 downwards.
In the "SWITCH" sheet I have already given all the GREEN Cell formated areas a name - INFO.
I want all the data in INFO to be inserted into "RESULT" sheet between row 18 and 19.
I have colour coded most of the areas for you.. And added a button from which the Macro / VBA should run when clicked.