I am good at excel but an infant with VBA. I have inserted a checkbox onto my worksheet. I want it, when checked, to select a row of data ("k5:k16") from Sheet 1 and copy it to ("a1:a12") in Sheet 5. When the checkbox is unselected, I want the ("a1:a12") to be cleared. I've tried several different ways to copy and continue to run into errors. I know there is a simple solution, but it's beyond me.
View 2 RepliesI have a check box that when checked needs to take information from multiple cells and copy into multiple cells and then when uncheck remove the data from the cells.
I have attached a sample.
I have a worksheet with several rows (A3:H70). Column J contains checkboxes (1 in each row). I'm trying to develop a macro that will clear rows based on the value of the check boxes. For example, if the checkbox on J3 is checked, that row (A3:H3) will be cleared.
If the checkbox on J4 is UNchecked, then that row will be skipped and so on.
I have multiple comboboxes with correlating checkboxes. That is, checkbox 1 goes with combobox 1, 2 goes with 2, etc.
When a particular button is pressed, I would like the combobox to clear it's value if it's checkbox value is false. I was hoping there would be an easier, more efficient process than what I have, which works and is as follows:
VB:
Private Sub cmdbTest_Click()
z = "dep"
Call TestSub(z)
z = "loc"
Call TestSub(z)
[Code]...
I currently have 8 comboboxes. Tags were used for the comboboxes during another process which are not used on the checkboxes, so that option is out.
Im looking for a macro that can get a cell RANGE, the data in the RANGE will be copied then if the checkbox is selected it will copy the same data in the RANGE and add the selected checkbox in next column
I have column A and Column B < this is my selected range
Capture1.PNG
I will have a form that has checkbox and buton.
When all the checkbox is selected. when the button is click. the result will be.
I am attempting to modify a spreadsheet so that it will enable a range on Sheet3 (I9:K42) if a check box is checked on Sheet2. If it is not checked, it will lock that range on Sheet 3 and grey (or gray, if you prefer) out that range.
View 9 Replies View RelatedI have a sheet with 550 checkboxes (form toolbar). I want to be able to reset the boxes to unchecked with a button. I found an example here but I seem to need the label (Ex: "Check Box 1")
Sub UnCheckit()
ActiveSheet.Shapes("Check Box 1").ControlFormat.Value = False
End Sub
It doesn't make sense I would need to leave the label showing on the sheet, but the label seems to be the identifer for each checkbox, not the named cell. So I am a little confused how to alter the code.
So when it works it looks like:
[] Check Box 1 Click this box to indicate something
While I wanted it to look like:
[] Click this box to indicate something
(I guess control checkboxes was the way to go but we are here now.)
I am quite new on this forum.
I would like a dynamic range to be multiplied with 2. The Range is always start in cell H14 to P?
I have multi checkbox in column F,
So here is an eksampel: If checkbox in F4 is true then Range H4:P4, should by multiplied with 2 else if the chekbox is FALSE, then only multiply with 1.
I want to entry data in the Range H14:P? by this code
Private Sub Worksheet_Change(ByVal Target As Range)
'Do nothing if more than one cell is changed or content deleted
If Target.Cells.Count > 1 Or IsEmpty(Target) Then Exit Sub
I'm using this macro to retrieve data from a worksheet within the same workbook. As you can see, I've set the destination range between row 12 and row 20. The problem is this code clears all text (not other formatting) from row 12 down even farther than the row 800 that is the end of my Origin range. QUE: How do you limit the reach of the ClearContents code?
Origin Name Range Definition
= 'ORDERS 1st QTR 08'!$A$1:$J$800
Sub GetData()
Application. ScreenUpdating = False
Range("A12:J20").ClearContents
Range("Data_Table"). AdvancedFilter Action:=xlFilterCopy, CriteriaRange:= _
Range("M1:M2"), CopyToRange:=Range("A12"), Unique:=False
Application.ScreenUpdating = True
End Sub
I have created a checkbox which places a "TT" on a master sheet when checked on the NEW8 sheet. What I want to know is how do I get the "TT" to delete from the master sheet when unchecked on the NEW8 sheet. Below is what I have...
View 9 Replies View RelatedI need a macro that will clear the contents of all cells shaded white in range c1:c20.
Clear the contents, leave the cells shaded white.
I'm trying clear the contents of a column range when the cell above this column range is empty. I know how to do this for one cell, but I would like it to work for a rangefrom R15:BB15.
If IsEmpty(Range("r15")) Then
Range("r16:r35").Select
Selection.ClearContents
End If
End Sub
I have a saved file at d: named Report.xls from another file I am copying column and pasting data to this report file, this is done by a macro. While pasting data to the report file, a pop up message is coming up – A file named D:
eport.xls already exists in this location? Do you want to replace it?
In case “yes” is clicked it pastes the data But the problem is that the macro that I have in the report.xls vanishes. The macro I need in the report.xls?
I have a macro set up on a command button so that when you click the button, it takes the info that you entered and puts it into line form on a seperate sheet. I need it to clear the original sheet after this happens, but the way I have it set up, when you remove the info from the original sheet it removes it from the second sheet. Does any one have a sample form that submits information this way? I think I can figure it out if I could see how someone else has done it.
The form is set up so that the user has to enter their name and then go through a series of drop down boxes, and select the correct options and then submit the form when done.
I have a range on worksheet "CONTROL" from S129:S228. There are 100 rows there. I have another range on the active sheet from B17:N116, also 100 rows. If S129 has a value of 1, then I need row 17 on the active sheet to be cleared (columns B-N). And so on all the way to the bottom of the ranges. If it has no value in the cell, then no clearing takes place. So it needs to test the whole range at once. I really have no clue what the variants and ranges should be, and have NO CLUE how to define a variable range so that I can use the value that R is on in the testing cycle to tell the active sheet which row to delete.
View 3 Replies View RelatedThere is data(numerical) or blanks in each of the cells in the range H32:O37
I want to clear the contents if they are a duplicate of the previous line.
Looking for a macro hopefully. Found many to delete the whole row but just the specific range based upon the duplicate criteria..As there is data surronding that area do not want to delete whole row just clear that specifc area.
H32:O32 clear contents if same as H31:O31 if any valuse are different then stays the same
H33:O33 clear contents if same as H32:O32 if any valuse are different then stays the same
H34:O34 clear contents if same as H33:O33 if any valuse are different then stays the same
H35:O35 clear contents if same as H34:O34 if any valuse are different then stays the same
H36:O36 clear contents if same as H35:O35 if any valuse are different then stays the same
H37:O37 clear contents if same as H36:O36 if any valuse are different then stays the same
I want to select and clear a part of a sheet.
here is what I have.
Sub clear_data()
sheets("sheet1").select
lr = activesheet.usedrange.rows.count
Here is where I get lost in translation (syntax).
I want to select starting at Bcolumn through bycolumn but the row be set with the LR from above, since the rows always change.
I could write B2:by2000, but i want to use the LR variable to define the number of rows i have.
Is there are macro that will allow me to: Clear Print Area, then Set Print Area based on user selection and finally print the Print Area to fit 1 page? I tried to search for solutions, but couldn't find any that matched my problem.
View 2 Replies View RelatedI have two rows of numbers, say D1 to F1 and D2 to F2. Row D2 to F2 will always have lower values.
The range below it is D3 to F100. I want the range to clear the contents of the cells in the range where:
a) the cell is > the x1 cell above it
OR b) the cell is < the x2 cell above it
If it is = or between the two cells, the value stays.
Example:
If D1 thru F1 is 4, 5, 7 and D2 thru F2 is 2, 4, 3, then:
D3 is 5, it is cleared
E3 is 4, it stays
F3 is 5, it stays
D4 is 2, it stays
E4 is 1, it is cleared
F4 is 9, it is cleared
Etc
Basically, the cell in the range looks up its own column, compares itself to x1 and x2 in that column. If it's greater than or less than, then it clears the contents, if not, the value in the cell stays.
I have the following Worksheet Change Event in my worksheet. The contents of range rng are not cleared.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rng As Range
rng = Range("F" & Target.Row & ":M" & Target.Row)
If Not Intersect(Target, Range("N5:N1000")) Is Nothing Then
If Target.Cells.Count = 1 Then
If Target.Value = "Yes" Then
Application.EnableEvents = False
rng.ClearContents
Application.EnableEvents = True
End If
End If
End If
End Sub
I have 4 sheets
Sheet 1
Sheet 2
Sheet 3
"Checkout"
What i would like:
Rows of data on Sheets 1/2/3 with a checkbox in column A of each row
I check a couple of checkboxes on sheet 1 some on sheet 2 and some on sheet 3
where i put a tick in checkbox they have copied across to next available row in sheet "checkout"
If i tick a checkbox then untick it (maybe changed mind) copied row is removed from checkout sheet.
I was asked about if i can copy defined cells when i checked its checkbox by using vba button , and another button in another book to paste those cells .
Mention that i may select more than one checkbox in copying and when i would paste these checkboxes , they would be in queue.
I want to add a checkbox that when checked, copies a value (E3) in the row and pastes it into another cell on the same row (G3). I would also like for it to be cleared when unchecked.
View 8 Replies View RelatedI need to take data from one sheet named "January" and paste it into another sheet named "Projections Sheet".
I want to use a checkbox to do this. So when the box is checked the data is entered into the next free row on the "Projections Sheet" starting in column B.
For example; I have data in "January" row 6, columns A through F. I need this data copied and pasted to "Projections Sheet" in the next free row (starting in row 6) and starting in column B.
Also, when I uncheck the box in January, I'd like the data removed from "Projections Sheet"
I need to copy all the cells to a "new worksheet" if the checkboxes are checked.
I have thousand of cell in here but i just narrow it down in this example.
example:
A B C D E F G
21 22 23 24 25 26 checked
31 32 33 34 35 36 unchecked
41 42 43 44 45 46 checked
51 52 53 54 55 56 unchecked
there is a command button in here that when it was click it will open a "new worksheet",
what I need to see in the new worksheet is this:
A B C D E F
21 22 23 24 25 26
41 42 43 44 45 46
I have a bunch of open files with dates in cell A3. I want to copy the range starting in A7 (the same range and size in all the open files) and paste it into my vbafile based on matching the date (in row 11). I have a spreadsheet attach with an example of what the code would do for Jan 1.
View 5 Replies View RelatedI am copying from cell A2 to C2, then A8 to C8, etc. if the cell in column "A" contains the text "Item" until the end of data in column A. Here is what I am attempting:
Sub MoveItem()
sText = "Item"
sText = LCase(sText)
iMax = Cells.SpecialCells(xlCellTypeLastCell).Row
For i1 = iMax To 1 Step -1
If InStr(1, LCase(Cells(i1, 1)), sText) <> 0 Then
Cells(i1, 1).Copy Destination:=Cells(i1, 3)
End If
Next i1
End Sub
The problem is the destination location. If I define it as a Range eg: Cells(i1, 1).Copy Destination:=Range("C2") The macro works, but does not iterate the destination cell.
I have this macro to copy a range to another worksheet:
Sub transpose_UPCID() ' Hace el copy y paste transposed en BAUCS de los numeros de UPC"s y
' las cajas ATR
Dim rng1 As Range
Dim rng2 As Range
Set rng1 = Sheets("Sales-Inventory").Range("UPC", Range("MK_ID").End(xlDown))
Set rng2 = Sheets("Sales-Inventory").Range("Figure", Range("Figure").End(xlDown))
rng1.Copy
Sheets("BAUCS").Range("C11").PasteSpecial Paste:=xlValues, _
Operation:=xlNone, SkipBlanks:=False _
, Transpose:=True
rng2.Copy
Sheets("BAUCS").Range("C37").PasteSpecial Paste:=xlValues, _
Operation:=xlNone, SkipBlanks:=False _
, Transpose:=True
Application.CutCopyMode = True
End Sub
The only problem is that this code copies all the items and I need this code to look into Column A in the Sales-Inventory worksheet. There I have a data validation with a total of six options. I also have six differents worksheets where I need to copy the values based on that data validation. To give you and example, all items containing XX in column A copy to XX worksheet. Something like that.
Here is what I have so far (debugger highlights my CheckBoxLD.Visable arguments)
Yes, this is an activeX checkbox
Code:
Private Sub Workbook_SheetCalculate(ByVal Sh As Object)
If Worksheets("Dosing").Range("BM21").Value = 0 Then
CheckBoxLD.visable = False
Else: CheckBoxLD.visable = True
End If
End Sub
I have several checkboxs in an excel sheet, that if one is checked i would like it to make a change to a variable in a macro that will run when saving a file.
for an example:
if checked:
Checkbox1 = NCE1
Checkbox2 = NCE2
Checkbox3 = NCE3
Checkbox4 = NCE4
Checkbox5 = NCE5
I have a bit of code that is like this....
ActiveWorkbook.SaveAs ("\marketing2PartageNonconforms" & sF1 & " - CO" & sF2 & " - FC" & sF3 & ".xls")
I would like sF1 to change depending on which checkbox is checked. so if checkbox1 is checked, than sF1 = NCE1 .