I need a macro script that goes to a particular cell in a column based on a criteria (say, locate the first instance where $0.21 appears in col. H), insert a row above it, and fill the row with the text "Note:These are above $0.20"
View 2 RepliesI need a VBA code to create a Text file which should be in the form of DML (my scenario is to get Insert Statements for the Data available in the Excel) from Excel Sheet. And this has to be done by assigning a macro to command button where by clicking on it the DML text file should be generated. Even the syntax for the scenario will do.
View 1 Replies View RelatedI am trying to clean up and simplify my macros by compartmentalizing frequently repeated commands. I like to search for text in column headings and define the cell containing it as a range that I can later use .column or .row commands on, so my macros are a bit more flexible. The code I currently use for this is
Dim XColumn As Range ‘the cell containing the text “X”
Cells.Select
Selection.Find(What:="X", After:=ActiveCell, LookIn:=xlFormulas, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False).Activate
Set XColumn = ActiveCell
I would like to be able to create a Macro (possibly name FindSetCell()) that will accept arguments and achieve the results of the above code in other macros
I think the command might look something like FindSetCell(“text to be searched for”,”name of newly Defined Range”) But I have not figured out how to code it
I need a macro that will insert this formula: =Trim(IF(B3="","",MID(B3&", "&B3,FIND(" ",B3)+1,LEN(B3)+1))) into column C starting on row three through the end of the spreadsheet information.
I typed this incorrectly when I first posted. I need it to fill down into only column C not the end of the spreadsheet.
I'm running a macro that opens another workbook and read data from it.How can I incorporate this code into my macro.Sorry i don't knwo VBA.
Workbooks.Open Filename:="C:Documents and SettingsmsimantbDesktopINFRACHEM_POLYMERS - DON''T DELETE.xls]Sheet1"
UserGRP_MAcro Macro
Rows("1:3").Select
Selection.Delete Shift:=xlUp
Columns("A:B").Select
Selection.Delete Shift:=xlToLeft
Columns("B:E").Select
Selection.Delete Shift:=xlToLeft
Columns("A:A").EntireColumn.AutoFit
Rows("2:2").Select
Selection.Delete Shift:=xlUp
Range("B1").Select
ActiveCell.FormulaR1C1 = "Existing userGroup"............................
I am trying to find a formula that will automatically fill in text that is entered in Sheet1 if it matches with a name in Sheet 2. I have found a formula that will enter a number but it will not work for text.
=SUMPRODUCT(Sheet 1!$C$3:$C$31,--(Sheet 2!$B$3:$B$31=$A15))
I would like the job on sheet 2 column B to fill in from what is listed next to their name on Sheet 1 column C, if the name of the person is entered on Sheet 2.
Sheet 1
NameJob1MaryFile2JohnLog3SallyIntake4PeterPack
Sheet 2
Staff Name &JobMary0John0Sally0Peter0
I need to enter text in a cell, then click on a command button that will run a macro to find that text in a column and if found, insert a row and copy down the formulas from the row above.
View 6 Replies View Relatedi have a userform named: usf_History.
i would like to refresh all the text boxes (they either refer to cells or are calculations)...?
I have spreadsheet with data all over. I want a macro which identifies the first cell (in Column A) which has the text "BNY" and insert 6 blank rows above the text "BNY" (First text in the Column).
Once, it is done - the macro should also assign names to the last inserted row.
Column A - Should reflect "Bank", Column B should reflect "Field1", Column C should reflect "Field 2" and Column D should reflect "Field 3".
And after the names are assigned - It should also highlight the last inserted row in Yellow.
For Example:
Raw Data (Snap):
Bank
Field 1
Field 2
Field 3
JPM
123
456
789
[Code] .....
Output (After Macro):
Bank
Field 1
Field 2
Field 3
JPM
123
456
789
[Code] .......
I want the macro to:
1. search A1:AZ1 to find the cell that has the text "VBA Test" in the cell. There could be other text in the cell as well - this is not an exact match - but these two words are the common text.
2. go to that cell
3. go to one cell below that
4. enter a formula (I've got it from here ....)
I want a Macro to be able to copy a formula down from cell A2 down the entire column within the data range. But, the problem I've got is that the spreadsheets I'll be using the Macro on will be different sizes. Currently, the VBA looks like this:
ActiveCell.FormulaR1C1 = "= LOWER(RC[3])"
Range("A2").Select
Selection.AutoFill Destination:=Range("A2:A17340"), Type:=xlFillDefault
Range("A2").Select
So the "Destination:=Range("A2:A17340")" part copies the formula into all cells from A2 to A17340. Other spreadsheets might only have data up to cell A200, or Awhatever - is there a way of getting the macro to populate just the cells in column A but only where there is data adjacent in other columns?
Also, I want the Macro to be able to delete all rows wherever "DELETE" appears in a certain column - I had a look at the "Delete Entire Row Based on Criteria" Macro but I'm looking for a fully automated solution, rather than the question boxes coming up and asking which cell/criteria, I need to run this macro on multiple sheets and the criteria/column position will always be the same -
I'm working on some macros to fill and file paperwork from an IBM Reflection based system into an Excel spreadsheet. Here's the code I've written so far:
Private Sub cmdSend_Click()
Dim ExcelObj As Object
Dim ExcelWasNotRunning As Boolean
On Error Resume Next
Set ExcelObj = GetObject(, "Excel.Application")
If Err.Number <> 0 Then ExcelWasNotRunning = True
Err.Clear
DetectExcel
If optObligation = True Then
Set ExcelObj = GetObject("S:PublicVisual Basic FormsExcel FormsObligation.xls")
Else..............
The problem I'm running into is that the data isn't loading the first time through. The spreadsheet opens, nothing happens, Excel closes. If I attempt to run the macro again without closing the form and clearing all the variables it runs perfectly as many times as I want to run it (which isn't terribly useful, because I'm stuck putting the same data into the form over and over again). If I unload the form then I get the same problem: first run, no data transfered.
I have created a macro with the below formula in it:
Range("L2").Select
ActiveCell.FormulaR1C1 = "=LEN(RC[-1])"
Range("L2").Select
Selection.AutoFill Destination:=Range("L2:L234")
Range("L2:L234").Select
I am using column K and it looks up the length of this cell. When I created the formula I was using info that only went to line 234 which was fine. Once I clear the info in column K and input new info it can go further than line 234. How do I get the macro to look up the whole of column k without having to create a new macro each time?
When I enter data in the cells A1 and B1, C1 needs to calculate the result. (not copy and paste)
For examle: I have formula C1=(A1+B1)/2
C column for formula, but shows result only when there is a data in A and B
I am trying to insert 50 tabs (at different points in time during a macro) that each has a state abbreviation. I know how to get the macro to add a tab, but to name it, it wants to select " Sheet 4". The problem with this is, the tab that was created might be sheet 15 or sheet 1, and I need it to be able to name the tab no matter what sheet # it is.
View 7 Replies View RelatedI am using the following code to find a NAME in my work sheet and to enter their status. But this macro is not compatible if a duplicate or Similar name exist.What I need is I need this macro to activate the search NAME Cell and then a VB box with OK & NEXT button has to appear. if the activated NAME is exactly the one I am searching, then I will click the OK button then it should display the "Enter Employee Status" box and as continue in my code, But If I press NEXT, the macro should search the next similar NAME and activate it, This process should continue until I click the OK button. (Same like CTRL+F function with an additional Status entry button)
Code:
Sub Button1848_Click()
Application.ScreenUpdating =False
Dim BeginCol AsLong
[Code]....
I have a worksheet with several thousand rows. During a month new entries are added at the bottom of the previous entries. One of the columns for each entry is a stock symbol and I've written a macro to enable going quickly to any specific stock symbol's location by searching for the symbol.
Once a month I select rows for some of the new entries for a given symbol, cut the relevant rows, activate the macro to find the location of other entries of the same symbol, and then "Insert Cut Cells" so as to move the new rows to the same area as other similar older entries.
What I was finding was that activating the macro was causing a recalculation of the workbook, which delays the macro from finding the symbol in question. This was getting bothersome, so I avoided the delay by adding an Application.Calculation = xlCalculationManual to the beginning of the macro, and at the end of the macro I reset the Calculation back to Automatic.
This eliminates the delay, in finding the old symbol, but it also clears out whatever memory location was storing the cut cells, so that I don't have the "Insert Cut Cells" option available once I get to the found location.
So, currently I have either: A) a quick find of the symbol, but I can't use the "Insert Cut Cells" feature, or B) I have a delay in the finding, but am able to Insert.
how I can have the quick find of the macro but still retain the ability to Insert the cut cells ?
I've got a problem that's causing me a headache. i have a document with 1 column and 4000 rows (its an export from active directory).
I need to do a search cell by cell (so A1 - A4000) for any cells that contain the text "changeType". When a cell is found, i need excel to insert a new row above the current cell and insert the text "modify" into the new row (in the first column).
eg.
x
x
x
changeType
x
x
Becomes:
x
x
x
Modify
ChangeType
x
x
I have written the below code to enter some formulas, validation, and formatting. I keep running into a problem when trying to add the first validation.
The debug msg is...
Run-time error '-2147417848 (80010108)':
Automation error
The Object invoked has disconnected from its clients.
Debug highlighted portion is...
.Add Type:=xlValidateList, AlertStyle:=xlValidAlertStop, Operator:= _
xlBetween, Formula1:="=PRODUCT" ....................
I have a formula that works fine in the cell of an Excel spreadsheet but I'm struggling to translate it into VBA (your help please).
The cell formula is:
=If(B2="", "", B2 & " (version: " & F2 & ")")
I want to iterate through all rows in my spreadsheet (about 2000) incrementing the relevant row numbers in the formula @ each pass - eg changing B2 -> B3 -> B4 etc and F2 -> F3 -> F4 etc where column 'B' contains the name of the product and column 'F' contains the version number, resulting in "Product Name (version: 123)" per row.
The closest I've got to this is:
Sub LookupNameInColumnA()
Range("A2").Select
Dim i As Integer
For i = 1 To Selection. CurrentRegion.Rows.Count - 1
ActiveCell.Formula = "=IF(B2="""", """", B2 & "" Version: 999"")" ' problem line?
ActiveCell.Offset(1, 0).Select
Next i
End Sub
This works OK'ish but I want each line to reflect the different data per row. I'm struggling to increment row 'B' and row 'F' in the formula, having tried "B & i + 1" and "F & i + 1" but am getting confused with quotes and concatenating strings within formulas.
I have a large spreadsheet with about 18000 rows or data and about 60 columns. I need to a macro to find a specific word in a column like "charge" and anytime that word is found in the column to insert a blank cell in front of it.
Currently the sheet looks like this:Fee AChargeFeeChargeFee AChargeFeeChargeFee AChargeFee AChargeNeed to get it to look like this: (so I can sort and subtotal)Fee AChargeFee AChargeFee AChargeFee ACharge
a macro to the for whichever column I choose.
Hello I'm looking for some clarification about how to use "= SUM(RC:RC)". I don't understand what the RC:RC represents. I thought that this was the directions for where to "position" the formula, but I think I'm missing something.
I was able to include the correct cells that I need summarized, but the answer is not right; it's zero.
Public Sub SubColumn(CritStr As String) ...
I need a macro that will insert text into merged cells. I have merged blocks where all will be exactly the same size one after another. (there are 19 blocks). The problem is that each month the size of the blocks change.(see sheet for example). Right now blocks are 8 rows will get to 16 by end of year. In each block I need a "- (city) (Name)" Each block has a different city and name that goes with it.
It would be an awesome time saver If I could click a button and have the city and names be entered into the appropriate spot no matter what month were in.
I'd like to adapt my macro so that it would insert a blank row after it detects the the first 16 characters of text as "'Closing Balance"; or it could even detect "'Closing" as the first 8 characters if it would be simpler
The Data Begins in Row 5 of Column A
My Current Macro is as below which I have adapted from another one I used
It is not working since it is detecting for the exact text "'Closing Balance" whereas the data registry would write "'Closing Balance as at 31/10/2009" , of which the "as at dd/mm/yyyy" portion would change every time a report is exported, but the first part "'Closing Balance" or even just the word "'Closing" will always be the same.
I have a workbook with single sheet called Fronpage. I want to insert a new sheet and rename the sheet based on the character value user specified in R1C1 in the Frontpage, and also would like the new sheet to be the last sheet in the workbook. I have tried to use DDE, and also Macro recording to do it. It didnt work out. Can anyone have any code to do it ?
View 2 Replies View RelatedI am trying to log a specific portion of code from a webpage. The line of code looks like this:
View Details
I need to extract the userid protion, the part between "=" and "'target...." and then
I had posted earlier to see if there was a way to protect certain cells from being updated when using a linked excel spreadsheet to access. Since there have been no replies I'm assuming not.
Different approach, can I create a Macro that would run after the update that would insert my required text into each cell from A2 through to R2.
The text would always be the same and always in exactly the same cells. This would need to be an insert into and not a replacement of the data already in those cells.
A1 B1 C1 D1
State
BUName
InsuranceCompanyName
Claim
ROnumber
Renter Last Name
[Code] .......
A2 B2 C2 D2
CategoryFilter CategoryFilter CategoryFilter NoFilter
The text under each of the A2, B2, C2 etc is what I would want the macro to do for me, essentially putting back what the update from the linked source removed.
I am new to VBA but I am trying to insert text and lock all duplicate cells except for the first one. Below is the macro I am trying to make. I keep getting an error on the line:
If(COUNTIF($A$9:$A$76,A9)=1,FALSE,NOT(COUNTIF($A$9:A9,A9)=1))
This is my macro:
Sub SetVoters()
'
' SetVoters Macro
'
'
Sub SetVoters()
'
' SetVoters Macro
'
'
ActiveSheet.Unprotect
[Code] ......
i need a macro that will look in column B and find the following rec codes, if found then keep these codes else delete (Entire row) for all other rec codes in this column,
"BROWN", "CHASE", "CITIAMP", "CITICUST"
I'm trying to develop code that will perform the function in the title. I want to use an if statement that looks at cells across the worksheet and where it finds certain text it should colour the entire row. I would also like to be able to input the text via a user box. I don't necessarily want the code
View 3 Replies View Related