I want the macro to:
1. search A1:AZ1 to find the cell that has the text "VBA Test" in the cell. There could be other text in the cell as well - this is not an exact match - but these two words are the common text.
2. go to that cell
3. go to one cell below that
4. enter a formula (I've got it from here ....)
I have a situation where I have to curve fit data, this can lead to different formulas being used with varying constants.
Is it possible to pickup a TEXT based formula and related constants from other cells, and then place this into another cell as a functioning formula. For Example
Cell A1 contains the formula as a text string whether it be y=a+bx+cx^2, or y=a+b/x, etc
Cells A2:A6 contain the individual constants, a, b, c, etc
I would then want the VBA to read the text based formula and put it into an output cell as a functioning excel formulae.g
In cell B10: =a+b*A10+c*A10^2
I understand picking the constants up and putting the formula should not be too much of an issue, however trying to insert the variable form of the curve fit is the part that I am struggling with, and am unsure if possible.
I built a formula that should work, but it's too long so I need to condense it.
I have three columns, column 1 has names, column 2 has a formula.
I have 15 sheets, each with a name that could appear in column 1.
If the cell in column 2, sheet 1 is Bob, I want it to pull H5 from sheet bob. That works as:
=IF(A5="Bob", 'Bob Data'!H4, "Work in Progress")
But if I build that formula for all the possible names, it's too long. Is there a way to make the formula autofill with the name in cell A5
So: =IF(A5="XXXX", 'XXXX'!H4, "Work in Progress")
I need to enter text in a cell, then click on a command button that will run a macro to find that text in a column and if found, insert a row and copy down the formulas from the row above.
View 6 Replies View RelatedIs there any formula to find text and return its cell address? This is like when we use Ctrl+F function to find a text, and Excel then highlight the cell contains the referred text. At the same time, the name-bar displays the address of the cell. Now, is there any formula that can perform such task like this?
View 9 Replies View RelatedI'm trying to do a column of individual discount calculations using a discount percentage found in a cell two to the right of a cell containing the text "Total SP:" that is always upwards and to the left of the cell where the formula goes (but could be two rows or could be 20). There are multiple "Total SP:" cells in the sheet - I always want the first one upwards. I have created the following but I get #NAME? where I hope to see the discounted value.
VB:
Dim Discount1 As Double
Discount = Cells.Find(What:="Total SP:", After:=ActiveCell, LookAt:=xlWhole, SearchOrder:=xlByRows, SearchDirection:=xlPrevious, MatchCase:=True).Offset(0, 2)
Range("R9:R" & LastRow).Formula = "=IF(J9>0,$E9*(1-Discount1),0)"
I've just thought, the Cells.Find needs to be redone for each cell where the formula is inserted to ensure it always catches the correct discount and this isn't going to do that - it's going to find it once and always use that single value.
I think this needs a Loop or something and to move the ActiveCell down one after the formula to get it to redo the Cells.Find.
I have spreadsheet with data all over. I want a macro which identifies the first cell (in Column A) which has the text "BNY" and insert 6 blank rows above the text "BNY" (First text in the Column).
Once, it is done - the macro should also assign names to the last inserted row.
Column A - Should reflect "Bank", Column B should reflect "Field1", Column C should reflect "Field 2" and Column D should reflect "Field 3".
And after the names are assigned - It should also highlight the last inserted row in Yellow.
For Example:
Raw Data (Snap):
Bank
Field 1
Field 2
Field 3
JPM
123
456
789
[Code] .....
Output (After Macro):
Bank
Field 1
Field 2
Field 3
JPM
123
456
789
[Code] .......
I need a macro script that goes to a particular cell in a column based on a criteria (say, locate the first instance where $0.21 appears in col. H), insert a row above it, and fill the row with the text "Note:These are above $0.20"
View 2 Replies View RelatedAll I want to do is insert a formula into a text box. This thread answers the exact same question but I don't understand how to highlight the text box as an object... [URL]....
View 2 Replies View RelatedI have some data in the form of text w/ 8 letters. I'd like to insert a hyphen after the third character. Is this possible using a formula to populate an entire field? Example:
Current format: ABC01234
Desired format: ABC-01234
I have Combobox on sheet which is filled with list of time intervals (text). If I select item from combobox, I want this time interval to be splitted as text and fill one cell with start time, and other with end time - so that I could calculate time difference.
I guess this could be done by inserting formula in this start/end time cells, like :
[Code] ....
and
[Code] .....
I'm doing this to allow user for picking commonly used time intervals from Combobox, but also to enter other start/end time in cells for that. I cannot do that without VBA, but I don't know how to do It in VBA.
My time intervals in Combobox are all in this text format, example:
[Code] ....
How can I do that ? I can also post a sample worksheet !
I am running a macro which basically is a tidy up of a data report that comes from SQL.
I am on the last bit Every time this tidy up runs there will be a different amount of rows but always the same columns. Under the last row of data I want to put the word 'TOTAL' in that row and column J. Then in the same row but column K I want to put a sum of K2 to that last row. How do I do this?
Here's all my code so far - like I said its basic formatiing stuff I've cobbled together!
Sub usagetidyup()
'
' usagetidyup Macro
'
'
Range("1:4,6:7").Select
Range("A6").Activate
Selection.Delete Shift:=xlUp
Columns("H:H").Select
[Code]...
Is it possible to insert a cell refenece into the FIND function.
So, replace JAN-2013 with Sheet1 cell A1
Selection.Find(What:="JAN-2013", After:=ActiveCell, LookIn:=xlValues, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False).Activate
I am trying to find the first "Tour" after cell A138. If "Tour" is not in cell A177, then I want to insert rows until that "Tour" is in cell A177. How can I do this?
Sub InsertRow()
Dim FoundTour As Range
Range("A5").Select
If Range("A30") = "TOUR" Then
Range("A31").Select
Else
Do While Range("A30") <> "TOUR"
Selection.EntireRow.Insert
Loop
End If
Range("A31").Select
If Range("A40") = "TOUR" Then
Range("A41").Select......................
I have an existing Cash Flow Report that has a column of abbreviated/shortened (WBS Element) title where each cell contains a unique three lettered/numbered amount of characters (Example: 200). These three abbreviated character cells are specific and relate to their full/longer (SAP WBS Element) title (Example: WBS DWRRI-BW066-200).
In my attached excel model (Find, Locate, and Align WBS Elements to Cash Flow Report.xlsx), I need a formula for the, "Cash Flow Report WBS Elements" sheet in cells B3 thru B11 that will look at the abbreviated three lettered/numbered (WBS Element) titles in cells C3 thru C11, then search and recognize its unique counterpart contained in the, "SAP WBS Elements Export" sheet and return this full/longer (SAP WBS Element) title to the, "Cash Flow Report WBS Elements" sheet in cells B3 thru. B11, just to the left of its abbreviated/shortened (WBS Element) title.
I have an existing Cash Flow Report for my work that has a column of abbreviated/shortened (WBS Element) titles where each cell contains unique three lettered/numbered characters (Example: 200). These three abbreviated character cells are specific and relate to their full/longer (SAP WBS Elements) titles (Example: WBS DWRRI-BW066-200).
In my attached excel model (Find, Locate, and Align WBS Elements to Cash Flow Report.xlsx), I need a formula for the, "Cash Flow Report WBS Elements" sheet in cells B3 thru B11 that will look at the abbreviated three lettered/numbered (WBS Element) titles in cells C3 thru C11, then search and recognize its unique counterpart contained in the, "SAP WBS Elements Export" sheet and return this full/longer (SAP WBA Element) title to the, "Cash Flow Report WBS Elements" sheet in cells B3 thru B11, just to the left of its abbreviated/shortened (WBS Element) title.
Find, Locate, and Align WBS Elements to Cash Flow Report.xlsx
I have a worksheet with several columns. I need a formula to search column D only and each time a specific location is identified to replace that location with alternate text. Example (ORIGNAL TEXT):
Column Dtext to text help.xlsx
BIRD
FISH
DOG
BAT
BUG
I need to search that listing and each time the word BIRD is mentioned have it replaced with FEATHERS and each time DOG is listed have it replaced with TAILS Final result would look like:
FEATHERS
FISH
TAILS
BAT
BUG
All other text should stay the same and replacement text should appear in the cell of the text it is replacing. This is a sheet used by multiple people several times a day and so the Find/Replace option really won't work.
Have working on this for at least 6 months and it just isn't going to happen for me. I thought I could use a Conditional format, but that is producing no results either.
My worksheet has two sheets which has daily continued data. I want to copy two entire columns E and F from Sheet 1 and then in Sheet 2 I want to find a particular word "80 Percent" and then insert two new Entire columns before that word. And after that I want to paste that copied columns of sheet1 in those newly created columns of sheet 2. Is it really possible because the cell reference of the word "80 Percent" in Sheet 2 will change daily. How to create the macro codes for this.
Find attached file : IRCS1.xlsx
I have a large spreadsheet with about 18000 rows or data and about 60 columns. I need to a macro to find a specific word in a column like "charge" and anytime that word is found in the column to insert a blank cell in front of it.
Currently the sheet looks like this:Fee AChargeFeeChargeFee AChargeFeeChargeFee AChargeFee AChargeNeed to get it to look like this: (so I can sort and subtotal)Fee AChargeFee AChargeFee AChargeFee ACharge
a macro to the for whichever column I choose.
I'm trying to create a macro that when run, scans Row 12 (only after column E), Finds the first empty cell, then inserts the cell value from Sheet4 CellE8. Then the hard bit begins. I need it to insert cell info in all the cells below it, from different locations...
For example
A
B
C
D
[Code].....
In the above sheet, I need it to go to cell D2 and insert the values from Sheet4 CellE8, Then proceed to D3 and insert data from Sheet3 D4, then to cell D5 and insert data from Sheet1 A7, etc etc
I dont mind doing each cell individually, but they will always be in the same column (and row 2 "Value" will always be the one that determines the next empty column).
I am having trouble getting my IF statement to test if the cell contains the text "sale" return "X" if not "Y". I need it to search through the text string in that cell and find a certain word, and if it finds that word, retrn a value. I am really having difficulty with is what symbol or function do I use for the logical test? (i.e. =, <>, MATCH, INDEX?)
View 4 Replies View RelatedI'm trying to write a macro similar to the one found here: here:http://www.techonthenet.com/excel/macros/checkbox.php.
Rather then use a textbox, I would like the cell to display the date when text is inserted in the cell to the left.
ie. I insert text (the letter 'a') in cell E11, and the date appears in cell F11.
I would also like the macro to do this for a range of cells ie. for E11 to F21, then from G11 to H21, then from I11 to J21, all the way to column IV.
With "sheet1" there's a table c14:m38 with all formulas. But i want to expand the table if cell c38 contains a value or text.
Is it possible to automaticly insert a row containing the above formulas in row c14:m14?
Is it possible to insert text an a cell value in conditional formating, i,e Ive got the conditional formatting:
=AND(H$4>=$B5;H$4<=$C5)
I want to insert this text whenever this condition is true once and not to repeay it:
="Load " &TEXT(G$5;"dd-mmmm") -- where G$5 is a vallue cell_
I was wondering if someone might be able to assist me with using VB to insert a new row below a cell containing specific text.
For example:
- All of my data is in column A
-I want to scan all of column A, and if there is a cell that contains "ACHCAMERIGROUP M", then I want a blank row inserted below it. If column A does NOT contain that text....do nothing.
I'm trying to write a bit of to take a text string collected from an inputbox, and paste it into a specific cell.
Should be easy but where my text string from the inputbox is "XYZ", when it enters it into the required cell it enters it as " ="XYZ" ".
Attempt at code is below -
Code:
Sub EmailEdit()
Dim Response As String
Response = Application.InputBox("Input administrator email address", , , , , , , 2)
'Check to see if Cancel was pressed.
If Response = "" Then
[Code] .....
I need a nudge in the right direction with how to amend the below code so that it :
1: cycles though all cells in a workbook, and sees whether the text reference of the cell contains a picture filename (i.e. searches for .png or .jpg in the cell contents)
3: if (1) is correct, it retrieves the picture from "C:/Users/jeff/Documents/Standards/" and pastes it as a cell comment background in the cell to the right (and overwrites any comment backgrounds that might already exist there)
The code below does something a bit different: it looks in a defined range, then adds a comment with a background picture retrieved based on the text in the cell to the left.
I'm sure this is a pretty basic change, but my VBA skills aren't up to it...I've only just started reading though Walkenbach's Power Programming! I'm using Excel 2007
Sub InsertComment()
'www.contextures.comxlcomments03.html
Dim rngList As Range
Dim c As Range
Dim cmt As Comment
Dim strPic As String
On Error Resume Next
Set rngList = Range("A1:A5")
strPic = "C:/Users/jeff/Documents/Standards/"
On Error Resume Next
For Each c In rngList
With c.Offset(0, 1)...................
I want to be able to specify inside the message the word that is in cell F6. So it would say "You Must Give A Reason For The Amount Of Mgr Voids For Shawn"... shawn being the name in cell F6.
If Range("F9").Value > 50 Then
MyInput = Application.InputBox("You Must Give A Reason For The Amount Of Mgr Voids For This Employee")
If MyInput = "" Then End
If MyInput = False Then End
ActiveSheet. Unprotect ("13792468")
ActiveSheet.Range("F9").AddComment
Range("F9").Comment.Visible = False
Range("F9").Comment.Text Text:="" & Chr(10) & (MyInput) & Chr(10) & ""
ActiveSheet.Protect ("13792468")
End If
I have a workbook with single sheet called Fronpage. I want to insert a new sheet and rename the sheet based on the character value user specified in R1C1 in the Frontpage, and also would like the new sheet to be the last sheet in the workbook. I have tried to use DDE, and also Macro recording to do it. It didnt work out. Can anyone have any code to do it ?
View 2 Replies View RelatedI am using this formula:
=IF($A27="","",IF((OR(+J27>P$10,+J27
