Macro Is Copying And Pasting Into Cell A2 On New Sheet Instead Of Cell A1

Jun 20, 2014

I have a macro that copies all my sheets onto a new sheet called combine. It is pasting onto the combine sheet starting on cell A2 instead of cell A1. Following is my macro.

Sub Combine()
Dim J As Integer
Sheets(1).Select
Worksheets.Add
Sheets(1).Name = "Combined"
On Error Resume Next
For J = 2 To Sheets.Count
Sheets(J).Activate
Range("A1").Select
Selection.CurrentRegion.Select
Selection.Copy Destination:=Sheets("Combined").Cells(Rows.Count, 1).End(xlUp)(2)
Next
End Sub

View 4 Replies


ADVERTISEMENT

Macro For Copying Columns From One Sheet Onto Another Is Pasting A Picture Instead

Mar 31, 2014

I have a sheet made into a form with some check boxes included. If I select all the relevant columns, create a new sheet, and paste into cell A1 - all of the information carries over just fine. You can still select cells and check the boxes in the new sheet.

However, when I record this action as a macro, using the macro produces a picture of the selected columns instead of actually copy/pasting the information. I can't click on the cells or check boxes. I can only move the picture around within the new sheet.

View 7 Replies View Related

Copying Part Of A Cell And Pasting It To The Cell Next To It

Sep 7, 2007

I have just generated a report of current customer numbers for our company. Unfortunately it reports it as "162 (162)". No idea why the program does it like that because it now makes using VLOOKUP very difficult.

What I want to do is copy the "162" part of the cell and paste it into the adjacent cell to make it easier to manipulate the worksheet. All of the customer numbers are in column D if that makes a difference.

View 9 Replies View Related

Copying And Pasting Current Region To Another Sheet Without Actually Copying?

May 15, 2014

I want to copy the current region on sheet 3 and paste that into sheet2 starting with cell E4. But I don't want to actually use the copy method. I believe there is a way to do this. I was thinking the following:

[Code] ......

The idea I had was to simply state that cell E4 would be assigned the value of CurrentRegion on sheet 3. Is there a way to bypass the copy method?

If not, how to copy, then paste?

View 2 Replies View Related

Copying And Pasting Into A Cell Comment

Dec 15, 2013

Say I copy "My name is John Doe"

In Cell B2 or D9 or whatever, I want to insert a Comment with it being "My name is John Doe"

How do I make Paste work in Comments?

View 2 Replies View Related

Copying And Pasting Conditional Formatting With Changing Cell Values

Mar 19, 2013

How to copy and paste conditional formatting with our changing the cell values. My first row of data starts in row 4 and here is what I have in D4

If D4 is less than or equal to AA4, AW4, BS4, CO4 then it will highlight D4

Now I want to copy that format and paste it for all rows in column D. The problem I'm having though is when I paste the formula it doesn't change to match the row I'm on. For example, when I paste it in D5 this is what I get

If D5 is less than or equal to AA4, AW4, BS4, CO4 then it will highlight D5

How do I paste it so that it will update to show AA5, AW5, BS5, and CO5. I want to be able to do this for 500 rows.

View 6 Replies View Related

Copying And Pasting In Hidden Sheet?

Aug 14, 2012

I have the following code (which works fine when the sheet isn't hidden)

Code:
FinalRow2 = TtlRev.Cells(Rows.Count, 1).End(xlUp).Row
TtlRev.Range("AM6:AO6").Copy
TtlRev.Range(Cells(6, 39), Cells(FinalRow2, 41)).Select
ActiveSheet.Paste

However, I need to hide the sheet, but it doesn't work because you can't use .select on a hidden sheet I believe. Any way of doing this to a hidden sheet?

View 4 Replies View Related

Copying Row Information And Pasting Onto New Sheet

Jul 22, 2006

I just need a code that will copy items in a row from column A:F...

View 5 Replies View Related

Grouping Objects Then Copying And Pasting Onto Another Sheet

Dec 18, 2008

doesnt work when recording a macro because the group name changes each time I group the pictures (visios) and the picture names change depending on what is on the sheet at the time.

Is there a way to group every picture on a sheet1 (excluding macro buttons), then copy them to sheet 2?

View 14 Replies View Related

Copying And Pasting Multiple Worksheets Into One Sheet

Jan 16, 2007

I'm writing code which will copy multiple sheets of information in a workbook (from a report) and trying to paste it onto one sheet in another document where I can further manipulate the data. Here's my code, I've made some mistakes, and I've just been banging my head against the screen try to fix it. I'm erroring at ActiveCell. Offset(1, 0).Range("A1").Select. I'm trying to paste it all in one sheet at the next blank cell in the sheet and then close the document after it's all been pasted.

Sub OpenDataSheet()
'Opens CSS Report
Workbooks.Open Filename:="C:Documents and SettingseichornjDesktopTest and Destroy est and destroy CSS.xls"
'Delete first two sheets of CSS report
Application.DisplayAlerts = False
Worksheets( Array(1, 2)).Delete
Dim mySheet As Worksheet
For Each mySheet In Worksheets
mySheet.Select
'Delete unneeded rows of CSS report

View 7 Replies View Related

Copying Sheet Data And Pasting It To A New Sheet

Jun 28, 2006

I have multiple worksheets and I am looking to take specific information from those worksheets and paste them into a new one, thereby compiling the information.
The "C" column is populated with certain cells that say "Not Acceptable". This varies from sheet to sheet, but all in the C column. I'm looking for a code that will run through all the sheets, find the cells that say "Not Acceptable", copy that row of information it is in, and paste it onto a specific sheet that we'll call "Summary"

View 4 Replies View Related

Copying And Pasting In Macro?

Jun 6, 2013

I am creating a macro for a monthly report of inventory. When I filter out items and the copy and paste them to another sheet, how do I tell the macro to paste it in the next available cell rather than say A20? Because the report has a different number of items and filter results from month to month.

View 3 Replies View Related

Runtime Error 1004 When Copying And Pasting Data To Another Sheet

Apr 17, 2014

I'm generating a runtime 1004 error with the macro I have attached to CommandButton1, "Clock_In".

The macro is copying the name, date and time from 3 cells on Sheet1 and pasting special values to another sheet.

View 2 Replies View Related

Copying And Pasting While Recording Macro

Sep 26, 2013

I am having trouble with a project for school. The instructions are: (In Worksheet 1) Type Your Name. Now, begin recording a Macro. Copy and Paste your name from Worksheet 1 to Worksheet 2. Fill in the background and edit the font. End.

Here is an example of the coding.

ActiveCell.Range("A1:E1").Select
Selection.Copy
ActiveSheet.Paste
Application.CutCopyMode = False
With Selection.Interior
.Pattern = xlSolid
.PatternColorIndex = xlAutomatic

[Code] .....

Now, according to the instructions I should be able to run the Macro in any worksheet....but anytime I run the Macro in any other worksheet I just get a yellow block without my name there.

View 4 Replies View Related

Macro - Copying/Pasting Data From One Workbook To Another

Feb 26, 2009

I'm trying to do is record a macro that will copy data from cells A1/A2 of Test.xls and paste it to cell A1/A2 of Text2.xls. Then when I run the macro again, it will copy B1/B2 of Test.xls to B1/B2 of Test2.xls, and then do that for the remaining cells.

View 9 Replies View Related

Code For Specifying Cells So That Copying And Pasting Macro Will Not Execute There

Feb 20, 2013

I've attached a sample workbook in which there are 3 macro-buttons.

The buttons will paste a shape in the active cell. So this means the buttons themselves could be deleted and replaced with a shape.

Since locking and then protecting the cells disables the macros, how can I amend the code to make sure the buttons' cells are protected from the copying and pasting macros? Or, how do I ensure that the macros only work in A1 - E5?

View 4 Replies View Related

Searching Cells Then Copying/pasting And Deleting Macro

Jun 25, 2009

I need to search column C for the text "X". If an "X" is found, I need to copy the text from the cell directly left of it and paste it into a seperate worksheet into cell B2, then go back to the original worksheet and delete the cell with "X" on it and the cell to the left.

View 9 Replies View Related

Macro Copying & Pasting Chart Affects Its Size

Sep 13, 2006

I have a macro that takes a worksheet and copies it to another workbook. It works, but the graph that is contained in the new worksheet ends up a little screwy; for instance, the Plot Area is larger than it should be (height-wise along the screen), and the chart's legend isn't in the exact same place as in the original chart.

ThisWorkbook.Worksheets(tempSheet).Copy After:=wb.ActiveSheet 'before:=ThisWorkbook.Sheets(1)
RenameTemplate

'unlink copy from template
'must unprotect before unlinking. We'll leave it unlocked cuz we don't care.
wb.ActiveSheet.Unprotect
'cells
wb.ActiveSheet.UsedRange.Copy 'ThisWorkbook.Sheets(tempSheet).UsedRange.Copy
wb.ActiveSheet.UsedRange.PasteSpecial Paste:=xlPasteValues ......................

View 3 Replies View Related

Pasting The Sum Of Two Cells From One Sheet To One Cell In A Different Sheet

Nov 10, 2006

I'm trying to write very simple code that copies totals from one worksheet and pastes to a different worksheet. Normally, it is a one cell to one cell copy/paste. For instance, I want to copy the total found in cell "C4" in Worksheet "BalanceSheet" and paste it into cell "C14" in Worksheet "SpreadFinancials." I'm able to do this fine, and the code below is what I've been using.

Occasionally though I'm needing to sum up 2 cells in Worksheet "BalanceSheet" and only copy/paste the summed total into one cell in Worksheet "SpreadFinancials". For instance, I want to sum the totals found in cell C8 and C9 in Worksheet "BalanceSheet" and then paste that summed total into cell "C8" in Worksheet "SpreadFinancials". I'm looking for simple code that does this. Here's an example of what I've been doing so far for one cell to one cell copy/pastes:

Sub PopulateFinancials()
Sheets("BalanceSheet").Range("C4").Copy Sheets("SpreadFinancials").Range("C14")
Sheets("BalanceSheet").Range("D4").Copy Sheets("SpreadFinancials").Range("E14")
Sheets("BalanceSheet").Range("E4").Copy Sheets("SpreadFinancials").Range("G14")
End Sub

View 4 Replies View Related

Pasting Entire Row To New Sheet If Cell Contains Certain Text?

Jun 29, 2014

I am looking at trying to develop a workbook for my job that would make things alot more efficient.

Firstly, I download data from a web based app into excel. I now want to take certain full rows and paste them into another sheet depending if they have certain text in a cell. So i want to search the entire coloumn for a value of "OR" and if this is present copy the entire row into a new sheet ?

View 14 Replies View Related

Pasting Data From One Sheet To Another With Formatting And Cell References

Feb 11, 2010

I have inherited a monstrous speadsheet on which all data appears on a single sheet rather than being broken up across several sheets in some logical fashion.

One portion of this monster is a set of quite a few form letters, each of which reference various cells elsewhere in the spreadsheet.

I want to move all of these letters, together, to another tabbed sheet as a first step in reorganizing the monster.

Simply copying and pasting the cells or columns doesn't work. It fails in different ways depending on which pasting options I employ.

A very simplified version of my problem appears on the 5 sheets of the attached file, with what I hope is just enough further detail about the difficulty.

By the way, I also tried using the "Insert Copied Cells" option when pasting but since this failed with the exact same results as one of the other options I didn't include the results in the example shreadsheet.

View 5 Replies View Related

Copying A Selected Cell In Col A And The Next Cell In Col B Into New Sheet

Sep 18, 2009

Basically I have a filtered list in colunms A to D. The user selects a cell in column A and I want to then be able to run a macro which copies that cell and the adjacent one in column B, into columns A and B on sheet2.

The complications are

Column B on the second sheet is merged with columns D to E so a straight forward cut and paste of A and B on sheet 1 into A and B on sheet 2 will not work in one cut and paste as it complains about merged cells. It would need to copy and paste A and then copy and paste B to avoid the error.

The row on sheet 2 where it is being pasted needs to be the first row between row 10 and row 30 where col A is blank (so it doesnt overwrite a previous copy and paste as they are basically creating a list on sheet 2 in those rows by runing this macro repeatedly). if there is no blank row then it should insert a new row at row 10 and paste into that

View 9 Replies View Related

Copying Sheet Names And Cell Data Into New Overview Sheet

Mar 21, 2013

I have workbook that has several sheets within the workbook that are set up identical. Each of the sheets in the workbook are for a specific company.

As of right now I have been adding a sheet to the workbook that is an overview for what is in each sheet (the individual companies). Currently I am doing the formatting of the heading and column names manually and I pull the data from each sheet with a VLookup. I have been trying to enhance my VBA skills with coding something that will fill in the appropriate cells from worksheet to worksheet.

What I am trying to do is to populate an overview sheet with cells C24, C25, and B36 being static on each row per sheet. Then each row will be populated with cells C(36, 59, 70, 81), D(36, 59, 70, 81), F(36, 59, 70, 81), G, and H(36, 59, 70, 81). The overview sheet will have the diagram below in a ru

I attached an example : example.xlsx

Sheet 1
C25
C24
B36
D36
C36
F36
G36
H36
I36

[Code] .....

View 1 Replies View Related

Update A Cell Value From A Previous Sheet After Copying The Sheet And Renaming It

Nov 21, 2009

I have copied a sheet, moved it to the end and renamed it with a date that is in cell "A1"

Now after that process is finished I need it to update the date in cell "A1" of the newly created sheet with the next day's date.

I am stuck however referring to the previous sheet to update the date value in "A1"

View 7 Replies View Related

Copying And Pasting Data Scenarios Into A Data Report Sheet

May 31, 2006

breeze.

Here is my situation:

X Y Z
Oct Nov Dec Jan Feb Mar Apr May Jun Jul Aug Sep
A
B
C

The above format is how I want my spreadsheet to look like. On another sheet within the workbook, I have a chart with some control options that allow me to vary X, Y, Z (I can vary either of these individually). Anytime I vary any one of X,Y,or Z, then the values in A,B,and C all change. This is what I am looking for, a Macro that will allow me the opportunity to everytime I change or vary an option (X,Y,Z), I can hit "Save Scenario" and the new values will be appended to my "Report" sheet. The values of A-C and X and Y are kept on a sheet entitled "FY 07". X is maintained on a sheet called "Inputs". So in all, X,Y, Z and A,B,C are all copied for each scenario.

View 9 Replies View Related

Automatically Copying Cell To Other Sheet On A Condition

Aug 14, 2007

I have 41 Sheet in my Workbook.

Sheet1 Contains all the Data

Now For every Staff I have Four Individual Sheet of "Seg"

What I want is to Copy Data From Sheet1 to each sheet of the Staff according to there Respective Details.

1st record to be copied automatically to Sheet7 (CAS B) in Bought Side Column,
2nd record to be copied automatically to Sheet6 (CAS A) in Sold Side Column
with name of toys in both the sheet.

View 9 Replies View Related

Copying Columns For N Times Based On Value In A Cell On Same Sheet

Oct 8, 2013

With reference to attached file. I want to copy column D&E for 'n' number of times of value based on B1. If value in cell B2 is 0 then hide cell D&E and if there is any other value, excel to copy E&F to next column (leaving one column blank after each paste).

A
B
C
D
E

2

Product A
Price

VTA-2001
999

VTAA-2001
1299

XMV-1001
1000

View 5 Replies View Related

Copying Cell Contents From One Sheet To Another Based On Colour

Jun 17, 2008

I have a workbook called "Staff Planner". I need to check Columns C to I in Sheet "Plan" to firstly find text in a red font, and then copy this value to Sheet "Useage" in Column K. (So, search C1:I1, find red font, copy contents of cell, paste value to K1). I then need to repeat this with blue font/value to H1, green font/value to E1, and finally pink font/value to B1

View 9 Replies View Related

Cell Copying Macro

Jun 18, 2005

I need to able to copy certain parts of cells and paste it somewhere else. The data within the cell is presented like this City A/City B/City C. With an '/' seperating each. How can I copy just one part of that string using a macro(city a), and then keep track of it so that the next time I use a macro on that cell it copies the next part of the string(city b). I'll always copy the first City first so deleting it after it is a copied is an option but I dont even know how to do that.

View 6 Replies View Related

Creating Macro To Open CSV Files And Pasting On Sheet?

Jul 11, 2014

i was wonder is there was any way I could go to the following website:

[URL]

and copy paste it into an excel sheet. What i would need is to get this page and the previous 7 days by changing the date "20140711" to "20140710" and so on. Each orevious day needs to be copy pasted to a different sheet.

As a new day occurs, I would like to delete the page 7 days ago and add the new day on a new sheet.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved