Creating Macro To Open CSV Files And Pasting On Sheet?
Jul 11, 2014
i was wonder is there was any way I could go to the following website:
and copy paste it into an excel sheet. What i would need is to get this page and the previous 7 days by changing the date "20140711" to "20140710" and so on. Each orevious day needs to be copy pasted to a different sheet.
As a new day occurs, I would like to delete the page 7 days ago and add the new day on a new sheet.
I have a hard time creating a macro from scratch I have 7 different excel files which im trying to create a macro that will combine all of this files (reports) into one, and then put the CT information (an excel file i have) on a separate tab within the 1 common report.
I have a code that creates a zipped file that saves to the desktop. The macro works fine except it repeats itself and doesn't stop. How can I change the following code so that it only creates one zipped file?
Code: Sub WhichButton() Dim strDate As String, SavePath As String, sFName As String Dim oApp As Object, iCtr As Long, I As Integer
How can I code a Macro in Excel to search in a preset directory and pull out, aka open/run a certain Adobe Acrobat .pdf file automatically? Is this even possible to code in Excel Macro or is it out of its scope of what Excel VB code can do?
Right now I have a very repetitive task where depending on the value of a certain field in Excel I have to search for the right/corresponding .pdf file and open it up do work in the .pdf as well as the Excel worksheet... I have to do like hundreds of this. So is there a quick way to code in Excel that a certain value will open a certain file named .pdf acrobat file? Can other programs/files be called upon and ran/started/opened from within Excel Macro?
-Open .xls file -Run a macro (it works correctly when run by itself but I'm trying to speed things up) -Save -Close -Open next file, and so on (I'll do this on no more than 200 files at a time all in the same folder)
I use this same macro on 18 excel spreadsheets. The spread sheet retrieves in data then massages the data then saves the spread sheet depending on cell values.This macro runs on file open. When a file is run one at a time the macro runs perfect.
This is the problem: I created a macro to open all 18 files one a time ,this macro Opens the file then the Macro (listed below) runs then closed the file. When this happens the macro will only save every other file. And I get a Text box message do I want to save this file. I have changed order of when the files run which has no effect.
Sub Auto_Open() Sheets("Raw data from qmf").Select If ActiveSheet.Range("W1").Text = "Done" Then Exit Sub Application.Goto Reference:="R2C1" Selection.QueryTable.Refresh BackgroundQuery:=False 'If no data Save and Exit sub If ActiveSheet.Range("A2") = "" Then Application.Run "BuildPath" If ActiveSheet.Range("A2") = "" Then Exit Sub ActiveSheet.QueryTables(1).Delete Sheets("Sub Total by Ticket").Select Application.Goto Reference:="R2C1"....................
The are two types of workbooks in C:Parts & SVC Sales "Parts Sales" and "service Sales" . The branch name is at the beginning of the file name
Instead of opening up each file individually in C:Parts & SVC Sales and selecting the appropriate csv file in C:/extract using the Update_Macro, I would like the macro to open up all the files in the directory C:Parts & SVC Sales and update each of these with the appropriate csv file in C:extract
The name and description type must match the csv files and then updated eg Br1 Parts Sales to be updated with csv file Br1 Salesperson 01-07-2014 (the date in the file is not important for match the parts file -the branch name for eg BR1 and "salesperson is) i.e Br1 Parts Sales must select BR1 Salesperson 01-07-2014
BR1 Service Sales Must be updated with Br1 Service order repair register.csv (branch name for eg Br1 in this instance name and Service order repair register (pertain to Service Sales) is important)
Br2 Parts Sales to be updated with Br2 Salesperson Br2 Service Sales must be updated with Br2 Service order repair register etc
I have a folder which has a set of files (Files may be anything like excel,pdf,word..etc).My rrequirement is: When i run the macro the first file to last file should open and wait for 5 sec and then close..I mean first time the first file should open and wait for 5 sec and close..Next 2 nd files shoul open and close after 5 sec..next third files should open and close after 5 sec...Like wise till last file..Is this possible to achive through macro code..
I have the following macro that is linked to a button.
There is also a function that is called to check to see if the file is already open.
These macros & functions work properly.
Basically, the Case statements check the extension of the file to be opened and then calls the correct macro to open that particular file.
I have shown the macro that is called by the Case statement that has the extension .xls . . . Excel
I want to keep these Case statements as I always want Excel files opened in new instances of Excel.
What I need is when the existing case statements do not find an extension that is listed, I want code added to this macro that can open any type of file, such as files with other types of extensions or without extensions.
My son suggested that I should try to get a macro that could open the file using the RUN command found under the Start Button. Sounds good to me.
I'm trying to set up a macro so that: in column C I will see the current (old) links being used by the workbookin column D I will input the new links I want to use in the workbookthe macro will open all those files in column Dthe macro will then replace the current (old) links with those listed in column D
I have the following so far, but something doesn't seem to be working - it gets as far as opening the first new file but doesn't open any others and doesn't change any links (although I've tested the part to change links separately and this seemed to work ok).
Sub linked_sheets() Dim LinkedBooks As Variant Dim i As Long LinkedBooks = ThisWorkbook.LinkSources() For i = LBound(LinkedBooks) To UBound(LinkedBooks) Cells(i + 3, 3) = LinkedBooks(i)
i've got the code below, and if you notice the directory and file line, I want a loop that'll do what the macro below does, but also for files j1k2-j1k200. I'm hoping there's a macro that'll be able to do this, as I don't want to have to copy, paste and edit the same macro below 200 times!
Application. ScreenUpdating = False ' turn off the screen updating Set wb = Workbooks.Open("C:Uni StuffStocks_J20j1ka.xls", False, False) Sheets("Sheet1").Select Range("B6:S6").Select Selection.Replace What:="]w1", Replacement:="]w2", LookAt:=xlPart, _ SearchOrder:=xlByRows, MatchCase:=False, SearchFormat:=False, _ ReplaceFormat:=False wb.Close True ' close the source workbook saving any changes Set wb = Nothing ' free memory Application.ScreenUpdating = True ' turn on the screen updating End Sub
I am trying to create a macro that will open certain files based on the contents of a cell. There are three possible files that I will want to open.
File1.xlsx File2.xlsx File3.xlsx
If the contents of cell Q2 = 10, 20, 30, 40 or 50 then open "File1.xlsx" If the contents of cell Q2 = 60, 70 or 80 then open "File2.xlsx" If the contents od cell Q2 = 90, 100, or 110 then open "File3.xlsx"
If the contents of Q2 do not equal any of the possibilities listed then I would like an error box to show with the option to end or debug the code.
I am trying to write a macro to open a specific file (i.e site 1) and copy a range and paste that data into another workbook (Comparisons).
I can manage to write the macro to do this one by one, but ideally I would like to write some sort of loop macro that will go down a specific range of files (column A), listing the copy range (column B), and where to paste (column C) until it hits a blank row.
That way I do not have to keep re-programming my comparison spreadsheet every time a new site opens.
I have a sheet made into a form with some check boxes included. If I select all the relevant columns, create a new sheet, and paste into cell A1 - all of the information carries over just fine. You can still select cells and check the boxes in the new sheet.
However, when I record this action as a macro, using the macro produces a picture of the selected columns instead of actually copy/pasting the information. I can't click on the cells or check boxes. I can only move the picture around within the new sheet.
I have a macro which opens a csv file, moves a few columns about then pastes the data into a master workbook. The problem I have is that even though there is only around 1,500 rows of data on the csv file, the sheet on the master workbook is showing up to row 1,048,576 after the data has been pasted in! This is causing issues as I use this data later on in the macro and there are a couple of 'find and replace' commands that take an age to run because of the number of blank rows.
What im trying to do is have a macro that will open a file called Blue 1.xls in location "I:SchedulesBlue" and then copy data from cells N13:034. Then paste it into another excel file (Press.xls)on worksheet "Press Break" cell G14.
The data that is copied not always fills up the cells N13:O34 so I need it to go to the next blank cell in column N and paste the information from file Blue 2, and so on for Yellow 1, Yellow 2, YellNR, and Green.
So to summarise I need a macro to open 6 files copy data from the same location on each of the files(N13:O34) then close and paste it into a master document(Press.xls) worksheet "Press Break".
I want to allow users to place files (.jpg, .tif, .pdf, .pps etc) into a network folder and then have my program open each file and display it for 30 seconds then close the file and the application before opening the next file.
1. Set up a loop to get a directory listing of the folder and write the listing to a text file.
2. Open up the text file and get the next filename in it
3. Open the file in the associated application
4. Wait for 30 seconds (or some period of time) and then close the file
5. Repeat steps 2-4
DoIt = 1 While DoIt = 1 Open "C:TempList.txt" for output as #1 Print #1, Files In Folder Close #1
Open "C:TempList.txt" for input as #2 while not eof(2) Line input #2, MyFile Display MyFile on screen Wait for 30 seconds Close MyFile and MyApplication that opened it wend Close #2
I can get the directory listing just fine with no problems
I can open the files in the associated application just fine with no problems.
with closing the application after 30 seconds or some period of time.
I need some code that will allow me to easily send it a filename and it will know how to close the file and the application that opened it.
I have an Excel application (Excel 2003) which is stored in the default Program Files folder by the Installer; for example: c:program fileszxchello.xls. The problem I am running into is this file opens as Read Only in Vista and this is interfering with the running of the application. There is no problem opening the file normally in Windows XP.
I have been able to narrow down the cause of this to the User Account Control system in Vista - if I turn OFF User Account Control, the Excel file opens normally and my application functions normally. Is there another option to open the Excel file without turning OFF User Account Control because some users may find it unacceptable to turn OFF this security feature. Ofcourse, one option is to install the application in another location, outside the Program Folder, and the file would open normally, but the Packaging Wizard that I am using to package the application does not allow me to install the application in any other location and thus, the application installs in the Program Folder and I am running into this problem of the Exel file opening as Read Only. Is there a way out of this situation where I can open the file normally (not as Read Only)?
I'm trying to open multiple files based on an array of WBnames that are on a 'Dashboard' tab, but I only want to open them if they are not already opened. The code below doesn't seem to check if they are open and just opens everything....
VB: Sub OpenWorkbooks() Dim WorkbookOpen() Dim WBnames() As String 'Array of WorkBooks to be Open Dim WorkbookCnt As Integer
I am making a spreadsheet that sorts and pastes, but I need to know if I can add a code to the Sort and Paste Macro that will open the second spread sheet needed without just already having it open and using the
My project requires working with 3 different files, in my example here: Delivery Status, Warehouse, and Clients. Delivery Status is the master file where the information is gathered at first. Then when the product arrives, from the column "AI" I choose the Destination which it could be a warehouse or client. So far the code that I have can paste the information in different sheets within the File Warehouse, but can not make the difference between the File warehouse and the file Clients.
In the Delivery Status file I can choose from the Column AI whether the destination is a warehouse or a client and I need Excel to paste the information in the proper file. Have in mind that I have a lot of sheets in both files. I am attaching an example files with the code.
EXAMPLE: Complete Sheet called "Day1". When day1 is complete you click on button and it then copies itself and creates and renames new sheet to "Day2", then when "Day2" is complete you click on button and it then copies itself and creates and renames new sheet to "Day3", and so on and so forth to "Day30".
Dim myname As String myname = Application. GetOpenFilename
I use it to attempt to open first a QuickBooks file and then an excel workbook. The Quickbooks file opens fine. The Excel workbook never appears to open but I do get the full file pathname to my excel workbook returned which I then parse off to get just the workbook name.
Why would it behave this way? I open both these files manually all the time.
Also, I'm trying to use a filter as follows:
myname = Application.GetOpenFilename("*.QBW")
I get a compile error saying that I'm calling the function wrong.
I've got a work book with numourous password protected sheets which i quite often have to update (as i use around 10 of these with at least 10 sheets in each its time consuming). I've had several goes at creating 2 macros to unlock and then lock the sheets (with my password). I've managed to create on that unlocks the sheets using the password but i can't get a macro to lock the sheets up again using the password.
I have a code which selects a range within my spreadsheet, copies it and then pastes it into word. The only thing I can't work out is how to get it to then return to the Excel Spreadsheet that I have open.
Sub SetPrintcopy() Dim appWord As Word.Application Set appWord = New Word.Application appWord.Visible = True ActiveSheet.PageSetup.PrintArea = "$A$1:$F$398" Range("A1:F398").Copy appWord.Documents.Add.Content.Paste End Sub
I am creating a Macro to convert formulas to values on a Datasheet after each entry from a form (worksheet) is carried over. Since each entry will go on a separate row I created formulas to give the new datas location. I just can't get the syntax correct for it to run.
Sub Convert_Formulas_to_Values() Range("Reviews!$B$202").Value: Range("Reviews!$AF$202").Value.Select Selection.Copy[code]....