For a single column of values, the following macro counts the first value twice, how can i fix this? for example: A1 thru A5 are a,a,b,c,d the result is
a 2
a 2
b 1
c 1
d 1
and should be
a 2
b 1
c 1
d 1
Macro:
Sub CountOfEachItem()
Dim ListRange As Range
Dim NewList As Range
[Code].....
I have a userForm (Form1) that contains a persons name that I would like to reference in a separate UserForm (Form2). In the separate UserForm (Form2) I need to reference this persons name many times, so I was wondering if there was a was to declare this name in the separate UserForm (Form2) as a constant. Only thing is that a constant, to the best of my knowledge, must be an expression and not a variable. Mainly, I'm trying to avoid declaring the myName variable in each Sub within Form2, which it will be needed for a ton of Sub's.
Code for Form2: Const myName As String = Form1.txtName.Value
I'm trying to set named range as a constant in VBA, to allow me to recall the same range as an output target in different subs, without having to 'set' it in each module. I have tried to declare it at the top of a module like this...
Public Const tpnb_range = Worksheets(" SQL").Range("tpnbs")
and get a "Compile Error : Constant expression required"
I'm trying to use the macro below (twice but with different variables) but everytime I get the error "Compile error: Constant expression required".
[Code]....
is there a way to do this in VBA? I've also read: - Dave Hawley's recommendation of using: Sheet1.UsedRange.SpecialCells(xlCellTypeConstants).ClearContents
from another thread (which is excellent!)
- SHG's recommendation of using a named range, for example:
Range("Inputs").ClearContents
Given my limited knowledge of VBA, how would I now combine the two to write a VBA sub-routine that clears a named range entitled "Entry" on a sheet entitled "Data"? Would the following be the correct syntax: Worksheets("Data").Range("Entry").SpecialCells(xlCellTypeConstants).ClearContents
I work on a daily basis with spreadsheets in excel. The number of columns is the same, but every single spreadsheet has a different number of rows. I recorded this macro in a table with 1196 rows and I would like to use this macro also in other tables with a different number of rows.
Sub City2()
'
' City2 Macro
'
'
Selection.Copy
Cells.Replace What:="POMPANO", Replacement:="Pompano Beach",
[Code].......
I am trying to write a macro which will autofill specific columns. The macro will set the range from the start of my autofill to the end of my autofill as a constant range.
The problem I need to get around is the end of my range can always change each time I run the macro. For instance, the first time I run the macro I may only need to autofill from row 4 to row 15. The next time, I may only need to autofill from row 4 to 23 (because of user updates). How can I make the end of my range not be a constant address but variable?
Is there a way to count everytime you use a macro? The macro is tied to a button so basically I wanna count everytime that button is pushed.
View 3 Replies View RelatedI have 3 columns of data that contain horses names and these are sorted by a race time.
See attached txt file for example....
Is it possible to create a macro linked to a button that, once pushed, will cause a particular cell to count up from zero? I would also like to be able to have a second button that would cause the same cell to count down!
View 2 Replies View RelatedI have an excel sheet with 5 columns and nearly 8000 rows. The 1st column consists of some values which goes as:
Column 1 Row 1: A
Column 1 Row 2: A
Column 1 Row 3: A
Column 1 Row 4: A
Column 1 Row 5: B
Column 1 Row 6: B
Column 1 Row 7: C
.
.
.
.
.
.
so on upto 8000 rows.
I need a macro which can run through column A, count how many A's are there, how many B's are there, how many C's are there and so on. The result if provided on another sheet or tab would be wonderful and should be like:
A-4
B-3
C-1
where A,B,C are values and 4,3,1 are the no. of times they are present in columns.
Is it possible to use a contstant array in Excel VBA? I have tried several differnt ways to declare it, but the VBA editor keeps yelling at me. The following did not work:
View 2 Replies View Relatedi have problem with a long code.
So I divided that code in 4 parts.
So I have
module1 -> Sub Macro1()
module2 -> Sub Macro2()
module3 -> Sub Macro3()
module4 -> Sub Macro4()
I have declared
Option Explicit
Dim mdNextTime1 As Double
Dim myEnter As Integer
'Dim myK1 As Integer
'Dim myK2 As Integer
'Dim myK3 As Integer
Dim myK4 As Integer
Const myC As Integer = 82
Dim Lastrow As Integer
Dim myActualRow As Integer
all my sub have the following structure:
what does the symbol # means in VBA? (but I couldn't put the # in the subject of my message )
I'm trying to understand someone's code... at some point he wrote:
sum_LU_Area = 0#
I thought that the # was used to declare a constant but I'm not too sure because in his code earlier he declared
Public sum_LU_Area As Double
Beside, sum_LU_Area is calculated somewhere further in the program.
Here is what I try to do:
At
A1 = Power(C1,B1)
A2 = Power(C2, B1)
A3 = Power(C3, B1)
....
An = Power(Cn, B1)
How can I increment column C while keeping B constant at B1 by using right-bottom mouse pointer dragging on column A? Or is there another way?
If I have a formula that I want to copy throughout a column, but I want to keep one of the parts of the formula constant, is there a short way to do this?
For example:
First cell is A1*O24
Second Cell is A2*O24
Third Cell is A3*O24
Right now when I try to copy the formulas, the second cell always reverts to A2*O25, which is not correct.
I try to adjust chart range using variable value instead of constant value.
My current code :
ActiveSheet.ChartObjects("Chart 4").Activate
ActiveChart.SeriesCollection(1).Values = "='Check_2G'!$Z$2:$Z$32"
I need to make range ( "='Check_2G'!$Z$2:$Z$32" ) adjestable with varible like m instead of 32 in previous code.
Code:
Const Books1 = Array("5638", "5639", "10984")
Const Books2 = Array("3140", "7509", "3050", "7549", "7508", "7032", "6770", "6773", "4388", "6460")
I want to set an array as above for multiple use in my code (Used for auto-filtering various data with the same criteria).
The above is not allowed it seems, is there an alternative method so that if my Constant changes I only need to amend this once.
I've never had to venture into Arrays as there was no need.
I'm now faced with Arrays.
Generally I'm able to figure things out, in this case I'm stumped.
What I have is a Constant Array, that output the amount of Rows the Array displayed in.
I know the information is there, what I don't know is how to extend the rows.
ie it Outputs 5 Rows right now, with a top row header.
What I want is 10 rows with a header.
I want to basically set a varible that can be called back into a multiple of documents I will try and explain this as best as I can but it is a fortnightly pay date... i.e. 22/04/2009 Wednesday... as the payroll is fortnightly I want to be able to use the current date or todays date in a future proof macro.
i.e. if todays date is the 14/04/09 then the next pay date has to be the 22/04/09, if this was run in two weeks it would be 06/05/2009.
I was thinking a long the lines of lock in one start date... 14/01/09, then adding increments of 14 days until todays date - variable + 14 * r = "-"
I am just wondering if this can be possible:
this is an table with a lot of cells
12 36 89 56 97 78 98 36
36 89 56 97 78 98 36 12
97 78 98 36 56 97 78 98
12 36 89 56 97 etc ..
etc...
to become like this ...
I created a name in Excel 2002, Name = "NameToUse", Refers to = "Bill".
How do I get the value in VBA code?
Range("NameToUse").value ' doesnt work
NameToUse ' doesn't work
Option Explicit
Public Const ARK As String = "Inddata-ARK"
Public Const VVS As String = "Inddata-VVS"
Public Const KON As String = "Inddata-KON"
Public Const EL As String = "Inddata-EL"
Public Const LD As String = "Inddata-LD"
Public Const KØL As String = "Inddata-KØL"
Public Const OpDat As String = "Opdatering"
And then macro's under it... So the aboce is in module "INIT_S". Now in another module "RUN_P" I have a sub-rutine that uses these constants with a select case.
Likes this:
Sub OpEksInitNu()
Select Case ActiveSheet. Name
Case ARK
With OpEks
'more stuff
Case VVS
'more stuff
Case KON
'more stuff
End Sub
But when I try to run OpEksInitNu i comes with ambigious name with ARK as the error, later down I use another public constant. But i keep getting the ambigious name error.. What could cause that... I have tried to locate all ARK, VVS etc. to try to determine if it is used later on, but it's not! I only declare the constants one time, and no module is called ARK, VVS etc.
I'm looking to run several subs in a module which all refer to the same constant but I'm having difficulty defining that constant in a way that the various subs will accept. Basically I'm trying to define a constant LastRow. I am fairly new to VBA so am not sure whether to use a Get LastRow public property (which I tried to use and failed) or a Function and then how to make this readable by all the subs.
View 5 Replies View RelatedHere is the attached Excel file and the following is the desired output of the macro:
1.) List the data (Names) of the Columns D (Input), F (Analyze), and H (Output) in Sheet1 to Column A (Name of Person) in Sheet2. There should be no repetition of two names.
2.) Count the number of entries of each person in the Column D (Input) in Sheet1 appears per month (basis is the Input Date column E) and record into the corresponding month in Sheet2 under the Input Header.
3.) Add the total of the 12 months in the YTD column under the Input Header.
4.) Repeat steps #2-3 for the Column F (Analyze) and Column H (Output) of Sheet1 with the results recorded in their corresponding headers in Sheet2.
5.) Note: The data in Sheet1 is a running data and continually adds up as the current year goes by. If there is a way the macro could take that into account it would be much better.
HERE IS THE LINK OF SAMPLE FILE: [URL]
I have sales per month going down a column and I would like to subtract a corresponding $ amount going across columns. It's hard to explain but I would like a formula that I can populate all of the cells with. Spreadsheet should make it clearer.
View 6 Replies View Relatedassume we have constant P = 100, K=50 and F=10.
I would like to "lock" these cells, and have a variable which could adjust and this variable would multiplicate each one and put out the number.
For example:
P = 100
K = 50
F = 10
Variable: 10 this would generate a sum of:
P = 1000
K = 50
F = 10
Ok, I have a spreadsheet that I use to track the majority of my work throughout the day. I have about 10 columns that I use for my own information, and about 4 of them that my colleagues need updates on. I have one sheet "worktracking" and another sheet "printable." Printable has just the 4 columns of info that my colleagues might need, formatted in a way that prints out nicely. Each column in "printable" references a column in "work tracking" like this
='worktracking'!c2
Now the problem that I'm running into is that I routinely delete rows from the "worktracking" sheet, which results in a reference error on the "printable" sheet. I am wondering if there is a way to rework it, such that when I delete a row from "worktracking," then "printable" just does the same, and only retains rows that have data in them...
I have a list of data which which has repeated supplier numbers in column A. For instance
A123
A123
A123
X456
x456
x456
x456
The information in other 13 columns is variable and I need to be able to move all the rows which start with the first supplier number to another sheet which I will rename to that name, then move the second set of supplier numbers to a second sheet etc. So in my above mini example I would have one sheet named A123 with 3 rows of data and another sheet named X456 with 4 rows of data.
The number of supplier codes will be different every day and the number of rows within each supplier number will also vary. Each new datafile that comes in daily creates a new file do I do not have to worry about existing values only what the current file contains. I have used the following code to move data based on a known constant before but dont know how to tell the macro "move all the data while the value stays the same"
Sub DiffOrderNo()
Dim totalrows As Long, row As Long
Cells.Sort Key1:=Range("A1")
totalrows = ActiveSheet.UsedRange.Rows.Count
[Code] ...........
I need to calculate a formula in a constantly changing range. In the example below, the formula in column C would yield the % change in column A between the first "P" value in column B and the minimum value prior to the next "P" value.
So, the first result would be =(A2-A1)/A1, which is (1896.3274 - 1973.4764)/1973.4764. The cells in column C would be blank until the next formula, which is =(A8-A7)/A7, then it gets tricky. The next would be =(A14-A10)/A10.
A B C
1 1973.4764 P
2 1896.3274
3 1922.5499
4 1905.2061
5 1985.6797
[Code] ...........