I have a spreadsheet with Data in row 4, from Column A:H.
Column A is data entry and the rest are formula ( either vlookup or calculations )
After I have entered data in column A ( let's say about 10 rows down - It could be more),
I want to run a macro that will copy the formula from B4:H4 down to where the entries in column A stop. Then it must select all the data below row 4 and "copy_paste_Special_Values".
I have been working on a macro that compares a existing list of data to an updated list of data and then either moves any data not on the new list over to a completed tab (followed by deleting the record on the existing sheet), and then adds any items not on the existing sheet, but which appear on the new list, to the existing list.
I have come across a stumbling block, i have managed to identify on the existing list the rows of data that have been removed from the new list and therefore need to be moved over to the completed tab, but when i select the data it selects the header row aswell (which will always remain the same row). Obviously this then pastes the header row aswell, and also i can't seem to get it to paste in the new sheet to the next available row (i.e this will be used daily and i don't won't to overwrite the infor already in the completed tab). the next issue i have is then when i go back to existing sheet to delete the data i just copied across, as the header was initially select this also gets deleted.
The code below, is the complete code, including filtering, copying some forumals etc. The area i am getting stuck on is highlighted in red:
Sub Update()
Dim bottomrow As Long
Dim My_Range As Range
bottomrow = Cells(Rows.Count, "C").End(xlUp).Row
Set My_Range = Range("A1:Y" & bottomrow)
[Code] .....
I have a workbook with four sheet. in Sheet1, column A, there are about 80 entries. I wish to copy these 80 entries to another Sheet, say sheet 2 in Column C.
View 3 Replies View RelatedI have written code to copy data from Col C to D on all sheets except the first sheet and the last two sheets.
However, when running the macro , no data is being copied from Col C to D
Code:
Sub Copy_data()
Application.DisplayAlerts = False
Dim i As Long
For i = 2 To Worksheets.Count - 2
LR = Cells(Rows.Count, 1).End(xlUp).Row
Range("C1:C" & LR).Copy Destination:=Range("D1")
Application.CutCopyMode = False
Next
End Sub
I need to copy a range of data from a sheet of one Work book to another sheet of a different work book.
View 2 Replies View RelatedI'd like to create a macro to copy data from tables in a workbook named "Survey Template 2014" to another workbook named "Status Report." Basically, I'd like the macro to search through the sheets in "Survey Template 2014" based on the Aircraft Registration No: entered in cell R2 of "Status Report." Once the required sheet is found, I'd like to start copying the contents from the "Description" column from 4 tables (Left/Right Wing Structure, Flight Controls/ Empennage/Doors, Nose/Fuselage and Interior/Passenger environment/Misc) if any data exists. I'd like the data to be copied into C19 (under Tasks Column) of the "Status Report" workbook.
View 2 Replies View Relatedmake a macro which copies columns B to E from workbook 'Book1' (sheet named database) into another workbook called 'Book2'?,
View 3 Replies View RelatedExample:
from cell b12 to i5, then
From cell d12 to j5 then
From cell d13 to k5 then
From cell d14 to l5 then
[Code]...
Each time back to cell b, i have to add 3 cells, like from b15 to b18.
I would like to automate this process, but i did not know how to make macro increment by 3. Etc. I have hundreds of numbers to deal with.
I am trying to create a macro that would copy three cell values - Date, Amount, Rate (from Sheet1) and paste them into Sheet2 as values.
In addition, this macro will be run for each business day's file, which only has the 3 values only as of that date; I want Sheet2 to be updated on a daily basis with historical data from past days (when the macro was run) and pasted as values.
For example, if i run the macro today, it should copy Date, Amount & Rate from Sheet1 ('Data' tab in sample.xls) and paste them as values in the next row after yesterday's data in Sheet2 ('Historic data' tab in sample.xls).
Sample attached; what is the best way to do this?
I have two workbooks which is attached 1)Daily and 2)Daily-2 i need data of Daily -2 to Daily workbook into relavent sheets not the title row. I have written some code for this but iam unable to make because data sometime is more or less in both the sheets.which needs expertise in macros which iam not.
View 3 Replies View RelatedI have one worksheet called WEEKS.xls which lists weeks 1 to 8, week1 being columns A,B,C, week2 being D,E,F, and so on up to week 8
I have another work sheet called supplier.xls which is a worksheet imported from a database. In this worksheet I have columns A to Q. I am only interested in the data in columns C, P & Q.
I have buttons along the top in the WEEKS.xls sheet, one for eack week. On week one when the button is clicked I would like a macro that would look in folder “Supplier Stock” for the worksheet suppliers.xls and then take the data from columns C,P,Q and paste them into the WEEKS.xls in columns A,B,C. On week 2 the data will be pasted into D,E,F and so on. On the supplier.xls there is a few gaps down the sheet , like row 15 & 16 and alo 19 & 20 if possible I don’t want the gaps in the WEEKS.xls. Also on column P it is a date format I would like that pasted into the WEEKS.XLS in a dd/mm/yy format
I have added both sheets to show you what I mean
I am trying to copy data from one sheet to another using a macro. I want it to do the following.
SHEET 1 SHEET 2
Column A Column D Column A
Quantity Part # Row 7 B12
Row 14 2 B12 B12
1 B10 B10
3 B11 B11
1 B9 B11
Row 30 B11
B11
B9
Basically copy the part number from column D on sheet 1 to sheet 4 but copy it equal to the Quantity in Column A.
Is it possible to create a Macro where I minimize the work of copying the data from one tab and pasting it into another tab, in a specific cell..?
Summary:
I have a pivot which contains data like; Location, PO, Date, NCM, Inv & Total. There are different Locations such as AHM, BHU, BLR, CHA, and so on; and there are different PO, Date, Inv, NCM and the Total Amt. Each Location has 2 types; 1st AHM-1 & AHM-2, and so on.
My Requirement is;
I want the data to be pasted automatically in the respective tabs, referring the pivot.
Eg: the Pivot has the below details;
Location
PO
Date
NCM
Inv
Total
AHM
1234567890
15.04.2013
2000000420
13I0MH2I1001
3607.76
[Code] ..........
The Location AHM has two rows which is referred an AHM-1 & AHM-2.
In AHM-1 & AHM -2 The PO should be pasted in cell B27, Date in cell C27, Inv in cell E27, NCM in cell E31, Price in cell F43 and Descpn in cell C41 with that particular month. In short, where the cells are highlighted in color Green.
The sample file is updated in the below link. [URL] ..........
I've build a marco that will copy data from 1 sheet to another based on a filter.
In some cases there is no new data and i get an error that there is nothing to copy.
When this is the case can i tell the macro to resume with next part of the macro.
I need a macro to copy data to various worksheets, in sheet workings, header is row 5, i have list of a/c codes in Col A, i need the macro to do autofilter col a5, and do a custom filter that begins with the following criterias, i then need the macro to copy filtered data to various worksheets, each worksheet is in the order of criteria, so CITI will be copied to CITIBANK_INTERNATIONAL etc. Target range to copy data to various sheets is A7
Criteria
Array("CITI", "CHES", "EXIG.AMPS20", "EXIG.COGN20", "BNPP", "ATOH", "ABNA", "BBHA", "BBHT", _
"BONY", "CITA", "JPMT", "NTCT", "STATE")
Worksheets
Array("CITIBANK_INTERNATIONAL", "CHESS_ASSET_REC", "LIFE_EXIGO", "NOMINEE_EXIGO", "INTL", "MC_AIMS_to_HIPORT", _
"SMP_REC", "SMP_REC", "SMP_REC", "SMP_REC", "SMP_REC", "SMP_REC", "NORTHERN_TRUST", "NOMURA")
I have a one workbook where I put in some data and some calculations are performed. Some of the data calculated I want to keep a running log of. I found some code on how to copy a cell to the next available row on a worksheet, but I want to put it in a totally different file. Also I would like to not have to open the other file up to transfer the data. Is this possible? My idea is to have a command button to push when I'm done entering the data.
View 3 Replies View RelatedTemplate is created where the users copy/paste the data from other file. Data validation has been performed with the following steps:
1. Macro inserts the vlookup formula into column A, which isused for validating data that is entered by user from column B to E.
2. If the data is incorrect the N/A will be displayed in column A and invalid data will behighlighted in red color in column B.
3. This validation goes through the loop and after the loop is finished the pop message will be displayed and macro should stop so the user can correct the data.
4. After the user correct the data, the macro needs to run again to make sure there is no further errors. If there are no errors, thehighlighted cells should be cleared out of color and pop.
Here is the code that runs by command button:
Private Sub CommandButton1_Click()
Call FindNA
End Sub
Sub FindNA()
Dim ResultRange As Range
Dim ResultCell As Range
Dim iRow As Integer
[Code] ......
I'm attempting another macro to copy the next years budgeted expenses from the LT Tracking tab to the Expense Tracking tab.
The result must be in the formula " ='LT Expenses'!D9 "
I have entered the following, however there is a syntax error on the last line: Sheet6.Cells(9, lcol).Resize(UBound(x, 1)) = x
Option Explicit
VB:
Private Sub Rectangle2_Click()
' NewExpenses Macro
' Transfers LT expenses to Expenses tracking sheet
[Code].....
I have a spreadsheet. This has columns begining with A to S (with data in it)
It has rows beginning on row 5 and goes down to 85 but it gets bigger every day.
I want to create a macro with several phases
Phase 1 - Select the rows I specify, ie pop up box to decide on the rows
Phase 2 - Filter down and select the rows in this selection where column K has a value (unselecting the rest)
Phase 3 - Copying Columns A, B, D, E, F, K, from the selection
Phase 4 - Pasting these columns into A, B, C, D, E, F, of the sheet the macro sits on....
I am trying create a macro that will create a new work sheet on an existing workbook. I have minimum experience writing a macro, but I do know how to effectively record one. The issue is, I need the macro to copy multiple columns down to the end of the data and pasting it into the new workbook at the end of the data already pasted-- rows of data are frequently added to the workbook.
View 4 Replies View RelatedI got a complicated macro that I need some help on. I want to write a macro that does the following (for clarity, I have attached an excel file).
I want to write a macro that automatically copies the rows in worksheet 'boekhouding' to their corresponding worksheet. The name of the worksheet, to which the data of each row has to be copied, is specified in row I (Beware: if it is not in row I, it is in row H). The names of all destination worksheets are given in the blue cells in worksheet ‘rekeningen’.
For example, row 2 (of worksheet 'boekhouding') should be copied to worksheet 'ABD'. Row 3 (of worksheet 'boekhouding') sheet be copied to sheet 'bestuur'. Row 4 (of worksheet 'boekhouding') should be copied to sheet 'Commissiekosten gala'. Etc for every datapoint (row) in worksheet 'boekhouding'. The number of datapoints will exceed 300, so manually doing this will be too time-consuming and unreliable.
I need a macro to copy data from "sheet1" "sheet2" "sheet3" / column E and F to the worksheet "final". The number of rows in "sheet1", "sheet2", "sheet3" etc. is variable.
View 5 Replies View RelatedI have a range that i need to run a report on regularly. This range has sporadic amounts of data in it. one time there may be 60 rows of data, next time there may be 250 rows of data. i want the macro to select and copy only the rows that have data in them.
i currently have a macro that i just set a range A25:A400 so it goes down and copies all these rows so it covers me .... but it is causing me problems by copying all those empty rows.
The macro will need to start at A25 and go down from there A26,A27 etc select and copy only rows that have data and stop. i need the data copied to a seperate sheet named "Combined Scoreboard" inputting at A25.
I need a Macro that can look in column A to find the date, and then drop down one row and move to column B and then copy the data in that cell to column C back up one row.
I've attached the workbook so you'll know what i'm talking about. I need the green cells to be moved to the blue cells all the way down.
COLUMN A =Date
COLUMN B =Empty Row
COLUMN C=Copy Details
COLUMN D=Paste Details
Im trying to create a Macro which can do the following: Go to the selected cell when Macro is run, keep going down cell by cell until it finds a blank cell, select the values, copy them and paste them by transposing into the cell next to where it started from in a row, carry on doing this procedure and pasting the transposed values next to the first non blank value until it gets to the end of this column.
View 4 Replies View RelatedI am looking for a macro that will allow me to the following:
- search column F for "word1", "word2", "word3", and/or "word4"
- then match the search to row on column C data
- then copy/paste row or rows of matched data unto "Sort" worksheet but only data from columns A, B, C, and F
- also, when copying, copy the row above
I have a worksheet(1) that contains data like: date, name, price, size....etc. I need to "sort" by size (only use 2 values - large and small), then copy each to another worksheet that saves data by the Month. The amount of data on worksheet(1) changes monthly.
View 9 Replies View RelatedSimple macro formula. I want to have my function to insert a column and copy over some data headings here is what I have...
Sub Macro17()
'
' Macro17 Macro
'
'
Selection.End(xlToLeft).Select
range("D5").Select
[Code] .........
The issue I am having is that is it inserts the column AA (end of the original data) and I want it to insert at the end of all the data. For example if I run the macro once it posts in column AA, I want the next result to post in AB but it posts in AA.
The number of rows in my spreadsheet will change. I am creating a Macro to insert a column and enter a formula in the second cell of the new column. I need to copy that formula down through that column to the last row, but don't know how many rows there might be that day.
View 2 Replies View RelatedMacro that can copy cells of data from about twenty five tabbed sheets in the workbook (subject to change) and compile them into one long worksheet (the first tab).
The cells to be copied will be fixed number of columns but variable number of rows. I only need copying of cells in one direction (from the tabbed pages to the compiled list), and I would like to keep the list automatically up to date or have a "refresh" button.
Here's an image to visually describe this: