I have one worksheet called WEEKS.xls which lists weeks 1 to 8, week1 being columns A,B,C, week2 being D,E,F, and so on up to week 8
I have another work sheet called supplier.xls which is a worksheet imported from a database. In this worksheet I have columns A to Q. I am only interested in the data in columns C, P & Q.
I have buttons along the top in the WEEKS.xls sheet, one for eack week. On week one when the button is clicked I would like a macro that would look in folder “Supplier Stock” for the worksheet suppliers.xls and then take the data from columns C,P,Q and paste them into the WEEKS.xls in columns A,B,C. On week 2 the data will be pasted into D,E,F and so on. On the supplier.xls there is a few gaps down the sheet , like row 15 & 16 and alo 19 & 20 if possible I don’t want the gaps in the WEEKS.xls. Also on column P it is a date format I would like that pasted into the WEEKS.XLS in a dd/mm/yy format
I have been working on a macro that compares a existing list of data to an updated list of data and then either moves any data not on the new list over to a completed tab (followed by deleting the record on the existing sheet), and then adds any items not on the existing sheet, but which appear on the new list, to the existing list.
I have come across a stumbling block, i have managed to identify on the existing list the rows of data that have been removed from the new list and therefore need to be moved over to the completed tab, but when i select the data it selects the header row aswell (which will always remain the same row). Obviously this then pastes the header row aswell, and also i can't seem to get it to paste in the new sheet to the next available row (i.e this will be used daily and i don't won't to overwrite the infor already in the completed tab). the next issue i have is then when i go back to existing sheet to delete the data i just copied across, as the header was initially select this also gets deleted.
The code below, is the complete code, including filtering, copying some forumals etc. The area i am getting stuck on is highlighted in red:
Sub Update() Dim bottomrow As Long Dim My_Range As Range bottomrow = Cells(Rows.Count, "C").End(xlUp).Row Set My_Range = Range("A1:Y" & bottomrow)
I need a macro to copy data from "sheet1" "sheet2" "sheet3" / column E and F to the worksheet "final". The number of rows in "sheet1", "sheet2", "sheet3" etc. is variable.
Worksheet 1 is a large data sheet containing columns of data (Date, State, Payment Method, etc, etc) Worksheet 2 is the 'Report' worksheet with 2 blank cells (A1 and A2) for users to manually enter the Start and End dates, a drop-list for State names (B1) and a drop-list for Payment Method (C1) - Cash or Credit Card.
How can I write a macro to:
1) Filter by Start and End Dates then, 2) Filter by State name then, 3) Filter by Cash or Credit Card then, 4) Copy these filtered records (i.e. whole row/s) onto the 'Report' worksheet starting at Column A, Row 5. 5) Macro to end with a 'Successful' message.
my requirement is as follows. I have a school data sheet(data sheet) and i have to filter data based on each school id.I need to pass school id in a different excel sheet(input sheet). So if the school id matches then i have to copy the entire data for tht school and move to to a new sheet.
Input sheet schoolid 211 321
Data Sheet
Emp No Surname last name schoolid 1 marian chin 211 3 luke mar 211 5 uyure tgt d 321 7 fdsfd fdsfsd 333
so whn the macro is run it should filter for 211 and 321 and move these three rows from data sheet to new output sheet.
I have a workbook with 2 worksheets being used. Sheet 1 has the months of the year starting with Jan in A1, Feb in B1 etc. On Sheet 2, I have a column of information. The first cell in the column eg. B1 has data validation list based on the months on Sheet 1. The information in the rest of the colum on Sheet 2 needs to be copied to the relevant colum on Sheet 1
I am looking to create a macro to be assigned to a button that copies the last row of data entered and then pastes it to the last empty row on a different worksheet. This is a dummy spreadsheet to work with (I have more data, but the concept is one in the same). Sheet1 ("Branch1"), Sheet2 ("Branch2"), and Sheet3 ("All"), the names in brackets are names of the sheets, but for ease I'll refer to them as Sheet1, Sheet2, and Sheet3. I have columns beginning in B as follows: Date, Branch, Currency, Coin, and Total (the branch and Total are tied to formulas, however I just need to the text values and formats to come over to the other worksheet). have the portion regarding the copy of the last row in Sheet1, however it won't PasteSpecial.Selection in Sheet3 as it says the cells are not sized or formatted correctly.
VB: Sub CopyB2() lr2 = Sheets("Branch2").Range("B" & Rows.Count).End(xlUp).Row lr3 = Sheets("All").Range("B" & Rows.Count).End(xlUp).Row + 1 Sheets("Branch2").Range("B" & lr2).EntireRow.Copy Sheets("All").Range("B" & lr3) End Sub
What I am trying to do is to look at specific columns, then copy the data in that column from specific rows from sheet 1 (named TIA) to sheet Macro1. I think uploading a sample of the spreadsheet would be useful.
Unfortunately the spreadsheet is a living document and continues to grow in both column and rows.. The data extracted at this point is from row 7, 23-60 and copied into the new worksheet starting at A1.
Requirements:
1) Row 5 states the macro the column will be associated with. There can be more that one macro associated to a column.
2) When column is found, data from row 7 column (x) will be copied to sheet macro1 EX. If Cell G5 = macro1 then copy data from G7 to sheet macro1 at A1
3) When column is found, data from row 23 column (x) will be copied to sheet macro1
i need a macro which copy and paste from multiple worksheets (except for 3 worksheets which is named after Jan, Feb and Mar) into one worksheets (named as OVERALL). The data to copy will cover from cell A1:D1 and below where there is data available.
I have a copy and paste macro below, that copies the selected rows and pastes them into a different sheet called Blank BOM. Each time they are pasted, it just writes over the previous items at the top of the list. I would like it to paste in the next open row, so I can go back and forth between the sheets and add things. Here is the code:
VB: Sub CopyRow() Selection.Copy Sheets("Blank BOM").Cells(Rows.Count, 1).End(xlUp).Offset(1, 0) End Sub
I have a macro set up in Excel that formats and deletes rows matching a citeria. Once the macro runs I then manually copy the data across into Word. I would like to automate this.
I would like the macro to copy over any cells containing data iinto a new word document. I also have standard text that I would like to include at the beginning and end of the word document. With the excel data being placed in the centre.
I have searched the web and tried a couple of macros with no luck. All the macros state "' requires a reference to the Word Object library: ' in the VBE select Tools, References and check the Microsoft Word X.X object library"
I am unsure how to reference this - but I have checked and found that the object library ticked is Microsoft Word 11.0 Object Library.
look for a certain value in worksheet A and copy that row of data to Worksheet B.
However, it seems to be only copying the row in worksheet A and pasting it. Is there something that a noob VBA scripter has missed out?
PHP Private Sub GetInfo_Click() Dim r As Long, LastRow As Long, Status As Integer Dim Message As String, Title As String, Default As String, MyValue As String Application.ScreenUpdating = False
MyValue = Range("A4").Value Workbooks("invoice.xls").Worksheets("A").Activate LastRow = Range("C65536").End(xlUp).Row For r = LastRow To 1 Step -1 If Cells(r, 1).Value = MyValue Then Rows(r).EntireRow.Copy Workbooks("invoice.xls").Worksheets("B").Activate Rows("8").Select Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False Status = 1 Workbooks("invoice.xls").Worksheets("A").Activate Rows(r).EntireRow.Delete
Exit For End If Next r Application.ScreenUpdating = True
What I am trying to do is to write a macro that will automatically copy six columns from worksheet (Sheet 1) to another worksheet (Sheet 2). i.e. ‘Description of Project’, ‘WBS Code’, ‘Rate’, ‘Employee Name’, ‘Premium’, ‘Invoice’, ‘Status’, ‘Total Cumulative Hours’, ‘Total Cumulative Amount’ from Worksheet (from Sheet 1 to Sheet 2)
The problem arises as I know the names of the columns to be copied in Sheet 1 (as details above) but they can be in any order in sheet 1.
In additional the columns ‘Total Cumulative Hours’, ‘Total Cumulative Amount’ are total columns so when they are copied from ‘Sheet 1’ to ‘Sheet 2’ their values should be copied as opposed to the formulas
I have a worksheet that utilizes a Worksheet Change Event. I created a macro to copy the sheet and that works fine except for the fact that it doesn't contain the Worksheet Change event.
I would like to copy the data from one worksheet to the alternate row in another worksheet as follows. I've attached a file showing the source file and the desired output.
1. Copy column B's data in worksheet "Working" to worksheet "Upload file" Column V. B2's data goes to V1, B3's data goes to V3, B3's data goes to V5, so on and so forth.
2. Copy column H's data in worksheet "Working" to worksheet "Upload file" Column F. H2's data goes to F1, H3's data goes to F3, H3's data goes to F5, so on and so forth.
The number of rows with data in worksheet "Working" varies. It could be 30 lines one time and over 100 lines another time.
I have embedded a worksheet called Rawdata" into a userform. Is has a number of text boxes on the userform, all the text boxes copy correctly to a worksheet called Rawdata, however i cant get the spreadsheet data to copy from the Userform to the sheet called Datapad.
The worksheet in the userform is from A1:G600, this data needs to be copied back to the Datapad worksheet B2:F601.
code so far:
Private Sub cmdadd_Click() Dim iRow As Long Dim ws As Worksheet
As I am managing a few projects at once, I would like to create a To Dos List for each project (seperated by different worksheets). To make my life a bit easier, I hope to show all the To Dos which is due on a particular day on a separate worksheet. In other words, I am hoping to write a macro which allows me to copy all the relevant To Dos (of that day) from different worksheets and compiled it into a single list on a new worksheet.
Note:
1) Each row of To Do contains 3 columns, Date, Priority and Descriptions. 2) The To Dos for each project are NOT arrange in sequence by dates. 3) Number of project will increase over time, therefore the number of worksheets will also increase.
Here is the above link. Am looking at a button which saves whatever is the temp worksheet row in the customers worksheet. The temp worksheet basically takes the data from the Quotations worksheet and places it in a row.
*My original workbook consists of 3 worksheets lets call them (W1,W2,W3) *I am copying W2 in a new book and pasting content of W1 via a macro. *But if i am to run this macro more then once it doesn't work as the name of the new workbook is different.
I have a workbook with two worksheets - Catalogue Request Summary (CRS) and Presentation Server Types (PST). The PST page is basically a form with validated entry fields, hence the information is updated constantly. The CRS is a summary tablised version of the information in the PST page.
I have setup a macro which copies across the information from the PST sheet and pastes into the CRS sheet. The problem is that when the macro is run, it over-writes the information instead of pasting the new data into the next row.
So basically I need the macro so that will copy any new information to a new row in the CRS page whenever new information has been added to the PST page the the button clicked.
I know it would be a lot easier if there was an attachment but there doesnt seem to be the option. Please pm your email address so I can send it through.
Edit - I have uploaded the file to an online storage site if anyone wants to download it. Link:http://www.4shared.com/file/91957046...ue_Test_a.html
I need to come up with a macro code to copy 2 worksheet from 2 workbooks to my current workbook. I do not know what is the code such that i can copy different worksheets from other workbooks to a currently opened workbook.
Below is the scenerio i want to achieve:
worksheet1 from workbook1 need to be copied and paste as a worksheet in workbook3. worksheet1 from workbook2 need to be copied and paste as a worksheet in workbook3. workbooks will eventually contain 2 worksheets which are from workbook1 & 2.
I have a Workbook with around 10 worksheets on, each worksheet is a form.
And when one form is completed we have to save a backup. So i want to assign a macro to a button on a worksheet so when clicked it will save a copy of that worksheet ONLY to a destination and not all the other worksheets along with it.
Copy worksheets from many workbooks to one Master workbook, which will be used to aggregate the data. I need a macro to do this, which will automatically name the worksheet it creates (using information from one of the cells).
The second part of my problem is that it needs to be smart enough to recognise if the worksheet that is being copied, has previously been copied to the master. If it has, it should overwrite the original worksheet rather than create a new one.
I need to come up with a macro code to copy 2 worksheet from 2 workbooks to my current workbook. I do not know what is the code such that i can copy different worksheets from other workbooks to a currently opened workbook.
Below is the scenerio i want to achieve:
worksheet1 from workbook1 need to be copied and paste as a worksheet in workbook3. worksheet1 from workbook2 need to be copied and paste as a worksheet in workbook3. workbooks will eventually contain 2 worksheets which are from workbook1 & 2.
I have an excel WS1 set up as DB; I want to keep this sheet for data revision. WS2,3, 4, & 5 will be data that is filtered and sorted, using WS1 as source so I want to auto copy the WS1 data. Can I just auto copy WS1 (how do I do that?) then filter and sort in each WS?
Iam looking for macro to copy rows based on partial cell content of a column. I have an excel spreadsheet called "arc.xlsx" from which I would like to copy data to other few new excel files when certain criteria are met. The excel file contained location is C:Documents and SettingsxxxxDesktopCompany.
Below is a sample of arc.xlsx
GP CUST_NO BR CUST_NAME day mo year I1 999999 1 SMITH 0 8 9 I1 999999 ab SMITH 4 8 9 I1 999999 cd SMITH 4 10 9 I1 999999 1 SMITH 4 1 10
[Code]...
I would like the macro to copy rows that have 'ab' in the column c (with title BR)and save it in a new excel file with name ab.xlsx in the same location folder.And the same for 'cd', '01' and '02' by saving the data in files with name cd.xlsx, 01.xlsx so on.
I am a complete amature at Marco's and formulas. I have been trying to create what i need but i am unable to get it to work. I have a worksheet named "Course dates incl. pursuit" which has a table which runs from B7 to J144 in the table it has date, number, name, location, job, area, notifified, on system and passed?. in that order. I want if the passed column which is in J if that has a Y in it to copy and paste into another worksheet on the next avaliable line, worksheet name "Master."I would like it in a slightly different order if that is possible they have the same titles on the table but would like it to go number, name, location, job, area and date. Running from B5 to G(end of spreadsheet). That is the main part i would also like to to copy and paste into another worksheet if the answer is "N" but the above part is the most important part. Due to the computer settings i am unable to attach it
In sheet Model RC BOM I am trying to copy all the rows under Level 1 (row 3), including level 1, until it reaches the next Level 1 (row 537) (not including row 537), and paste those cells in next tab (BIW) starting at row 2. The next operation is to copy all rows under Level 1 (row 537), including level 1, until it reaches the next Level (row 827), not including row 537, and paste those cells in the next tab (Chassis) starting at row 2.
The challenge is that I cannot use the row numbering in sheet Model RC BOM as a reference for coding because the content will change every week.
I have one excel file having two sheets viz "DailyRecd" and "MasterList". I need to copy some cell value from "Daily Recd" sheet to "MasterList" sheet using macro-function. A sample Excel file attached for easy reference.
2.xlsm is open. it contains a sheet called Report_P New_report.xlsx is open and has 9 existing sheets
Every time this tries to execute I get a "Run time error 1004 Copy Method of Worksheet Failed".
What is wrong with this code? I have an identical line in another macro, the only difference is that there are 5 sheets pre-existing, and that works fine.
