Macro To Delete All Spaces In All Sheet Names
Dec 8, 2011Is there a macro I can write that will delete all spaces in all the sheet names in a workbook?
View 4 Replies
ADVERTISEMENT
Sheet Names With Spaces In VBA
Mar 4, 2009I have been using the code below for a form. But now I need to change the sheet name to have spaces. But when I do. I comes up with the Run Time 1004 error on the “Ctrl.Text = Range(Ctrl.Tag).Text '*** “ line.
Why is it that this line is not allowing me to have spaces?
Private Sub Load_Controls()
Dim Ctrl As Control
For Each Ctrl In UserForm1.Controls
If Ctrl.Tag "" Then
Ctrl.Text = Range(Ctrl.Tag).Text '***
End If
Next Ctrl
End Sub
Hyperlink Code For Sheet Names With Spaces Or Dashes
Sep 7, 2007I believe I have 99% of what I need. The code below has one bug. (See just the underlined text for a very quick overview. The rest is detail.)
My goal is to generate a TOC that:
1) has the VBA run from my Personal Workbook.
2) can be run in any worksheet of any open workbook.
3) can be run in a worksheet of any name.
4) will insert itself at the currently active cell.
5) has entries hyperlinking to the referenced worksheets - of any name.
Right now, I'm stuck with the last point. The macro below will generate the TOC at the currently active cell. The TOC will be hyperlinks to the referenced worksheets.
However, if the referenced worksheet contains a space, dash, or other special character then the generated hyperlink is broken. For example, if the referenced worksheet is "sheet1" then the hyperlink generated works just fine. However, if the referenced worksheet is "sheet-1" then the generated hyperlink doesn't work.
Sub IndexList()
Dim objSheet As Object
Dim intRow As Integer
Dim strCol As Integer
Set objSheet = Excel.Sheets
intRow = ActiveCell.Row 'Start writing in active row
strCol = ActiveCell.Column 'Start writing in active column
For Each objSheet In ActiveWorkbook.Sheets
Cells(intRow, strCol).Select
ActiveSheet.Hyperlinks.Add Anchor:=Selection, Address:="", SubAddress:= _
objSheet.Name & "!A1", TextToDisplay:=objSheet.Name
intRow = intRow + 1
Next
End Sub
Spaces In Sheet Name Stops Macro
Sep 28, 2011I've had a macro running for ages, and just found it bugs out when there are spaces in a sheet name.
The user selects a destination cell as part of a form, which passes the variable to the following steps:
Code:
looperx = 0
Do
looperx = looperx + 1
Loop Until Mid(celldestinationstring, looperx, 1) = "!"
Sheets(Left(celldestinationstring, looperx - 1)).Select
The purpose of which is to isolate the sheet name from the cell reference, which is typically like: 'Bob Sheet'!$B$9
This works fine where there are no spaces, but 'dies' with a runtime error when there are. With the apostrophes I assumed it would work around spaces in the string but I can't get it to work.
Delete Range Names That Refer To Sheet
Dec 19, 2006I am looking for a way to delete all the range names in a worksheet, not the whole workbook. I have found several procedures that will delete all the names in an activeworkbook. For some reason it takes too long to run. Does anyone know how to handle a single sheet in VBA?
View 6 Replies View RelatedDelete All Range Names Macro Code
May 13, 2008I have written VBA code which is operated every month. This code deletes several range names in a target spreadsheet, performs other actions - including extracting certain areas to different spreadsheets and then closes the spreadsheet without saving.
The range names in the target spreadsheet are required for ongoing use, so can not be deleted permanently.
Is there any code that deletes all range names in one go? At present my code includes the results of recording a macro wherein I delete each range name in turn - creating script over 100 lines long.
Macro Delete Page (delete A Sheet In A Macro But When I Run The Macro)
Jun 19, 2009I want to delete a sheet in a macro but when I run the macro, I always get a message warning and I have to answer the msg box to delete the page. Below is the macro command I am using.
Sheets("Tel").Select
ActiveWindow.SelectedSheets.Delete
Delete Extra Spaces After Text
Jun 20, 2014Please refer to attached file.
Column A have data and i need VB Code (Not formula) to check each cell in column A and delete any spaces and make sure that there is no spaces after end of the text.
As an example you can see Cell cell A15 thru A22 have spaces after the text so need to delete those spaces
Book1.xlsx‎
Delete Empty Spaces In Cell
Jul 20, 2009How do i delete an empy spaces in cell. For example i have this value:
33.1 x 2.9 and i want to have: 33.1x2.9
Delete Initial Spaces From Numbers
Mar 17, 2007I have inserted a set of numbers from the web, and some are appearing with $, and others with commas, and also some with spaces before the numbers. I can remove the $ and commas fine using crtl replace but cant get rid of the spaces before the numbers? I seem to remember in word there is a way to do this using crt+replace (using $ or ^ sign perhaps?) but need my memory jogged.
View 5 Replies View RelatedMacro To Find Replace Specific Text In Multiple Sheet Names
Sep 13, 2010I need a macro that will look for a specific text string in the tab names of the workbook and replace it with a new specified text string (leaving the rest of the existing tab names). In other words, a simple find/replace but applied to all tab names in the workbook rather than cells. Ideally, I'd like it to pop up something and ask for the text to find and the text to replace it with, so I don't have to edit the macro itself each time I want to use it, but editing the macro each time is fine. Either way will be wonderful.
View 9 Replies View RelatedMacro Delete The Sheet And A New Sheet Created
Jan 1, 2008I have a sheet that I will activate by clicking on the tab.
In that sheet I have a code Worksheet_Activate / Call Summary / End sub
The problem is that the macro Summary this sheet get deleted and a new sheet
created,so I can use only one time this Worksheet_Activate.
Can Create Data Validation List Of Names Created In Name Box Or Sheet Tab Names
May 7, 2012Can I create data validation list of the names created in the name box or of the sheet tab names?
View 5 Replies View RelatedExcel 2010 :: VBA - Hide Sheets Using Code Names Not Sheet Names
Oct 15, 2013Code:
Sheets(Array("Sheet 1", "Sheet 2")).Visible = False
How do I convert the above to using Sheet Codes Names, Sheet1 and Sheet2?
Want to ensure my code will work if the user changes the sheet name.
Create Array Of File Names/sheet Names
May 1, 2008Two part question:
1) I'm relatively new to arrays, but what I need to do is generate a list of file names and the sheets within each one. I would like to use an array for this, but since I don't have much experience.... well....that's why I'm here. Can someone point me in the right direction?
2) And the second part of this.... I was planning on using the FileSystemObject to determine the files in a selected folder and loop through that list of files, opening each one and harvesting the required info (file name and all sheet names). Should I use the FSO or is there something built into Excel that might be better (and also limit the number of dependencies for this little "project" of mine).
List Sheet Names And Internal Names Within Workbook
Feb 25, 2011Is it possible to produce a list on a new worksheet of all sheet names and their their internal names within a workbook?
If so I would like the tabbed name's to begin in say A2 with the corresponding internal name in B2.
Macro To Skip Delete Sheet.
Apr 13, 2009macro to skip delete sheet question. i have this as part of my code
View 2 Replies View RelatedMacro To Delete Sheet If Count Is Zero
Sep 25, 2012I have a macro that loop over 15 sheets and count the blank fields in these sheets.
I was trying to find a macro that delete these sheets that has the count = zero
Delete Sheet If A2 Is Blank And Then Continue MACRO
Nov 20, 2007I have been able to put together a pretty hefty MACRO. I found out that some of the files I am importing may result in no data due to the manipulations I am doing. This causes a problem when I try to subtotal the data on each sheet. Is there a way to have the MACRO delete a sheet if cell a2 is blank and then continuw with the rest of the MACRO?
View 9 Replies View RelatedMacro - How To Remove Delete Prompt When Deleting A Sheet
Jul 22, 2013I have a Macro which deletes a sheet called "Pre selection" with:
Sheets("Pre selection").Select
ActiveWindow.SelectedSheets.Delete
It asks me every time if I am sure and I have to click to continue. Is there any way to remove this prompt or set it to continue without my intervention?
SUM And DELETE Duplicate From Multiple Table To New Sheet With VBA MACRO
Dec 21, 2013I have one sheet that have +/-5000 data in 4 table ... all table is fill with just only 2 column, first column is Code Number and second column is Quantity.
There are many duplicates of different entries in Column 1st in all table range and I need to add up their quantities to new table in new sheet...
This is for example:
(Sheet1 name="INPUT") (table1=A:B) (table2=E:F) (table3=I:J)
A B E F I J
AB123 100 ABC123 20 AA1 10
AC278 50 BCD547 30 AA2 10
AB123 30 FGE988 30 AB3 10
DE586 120 ABC123 50 AA2 10
RE158 80 BCD547 120 AA1 10
DE586 50 ABC123 70 AD4 10
Then I want to use macro vba to create new sheet(Summary Report),copy,paste,sort and sum all duplicate...
It should look like this
(Sheet1 name="Summary_Report")
A B E F I J
AB123 130 ABC123 140 AA1 20
AC278 50 BCD547 150 AA2 20
DE586 170 FGE988 30 AB3 10
RE158 80 AD4 10
Excel Macro Delete Rows Where Date Criteria Is In Another Sheet
Feb 28, 2014I am trying to adapt a macro which deletes all rows in Worksheet 1 where the date in column K differs from a date in Worksheet 2. The date in Worksheet 2 will change each day.
I think the macro below could be used, but don't understand how to replace the "Value = ":70:" with a reference to the master date in Worksheet 2.
Sub test() Dim lr As Long, i As Long lr = Range("A1").End(xlDown).Row
For i = lr To 1 Step -1 If Cells(lr, 1).Value = ":70:" Then
Cells(lr, 1).EntireRow.Delete End If lr = lr - 1 Next i End Sub
Hyperlink Names In Sheet 1 To Same Names In Sheet Two?
Mar 27, 2014I would like to hyperlink the names in sheet 1 to the same names in sheet two. Is there a way I could do this using a formula rather that do each one by one?
View 3 Replies View RelatedFolder Names Instead Of File Names/macro
Dec 10, 2008I need to make this macro read FOLDER names instead of FILE names. When I posted this question yesterday to get this macro, I wasn't told that each file in its own folder. I need the folder names now.
_____________________________________
Sub test()
With Application.FileSearch
.NewSearch
.LookIn = "C:Ford"
.SearchSubFolders = False
.Filename = "*.*"
.FileType = msoFileTypeAllFiles
If .Execute() > 0 Then
For i = 1 To .FoundFiles.Count
Cells(i, 1) = .FoundFiles(i)
Next i
Else
Cells(i, 1) = "No files Found"
End If
End With
End Sub
Reference Array Of Cells Into Different Sheet Without Spaces
Jun 24, 2014I have attached what my problem is. Have a look, and let me know what you think...have spent hours trying INDEX, MATCH, IF, ISTEXT...
JamesExcel problem.pdfExcel problem.pdf
Macro To Copy Dynamic Sheet In New Workbook - Save As Temp / Mail And Delete
Sep 15, 2014Code to copy the sheet that get selected by if-then-elseif statement and paste in a new workbook, save the workbook as temp, email it and delete it,
sub sending_mail
Dim OutApp As Object
Dim OutMail As Object
Dim rng As Range
Dim DataWB As Worksheet
[Code] ......
Delete All Names
Mar 15, 2007What does he means by then use /rnr??? I tried to write /rnr in the microsoft excel menu or help key and pressed entered but got the error "separator or menu key must be one character"....
Sub DeleteAllNames()
Dim name As name
For Each name In Names
name.Delete
Next name
End Sub
Delete All Names ..
Apr 24, 2007I have an excel file crashing because of corrupted names.
I used the following macro:
Sub DeleteAllNames()
Dim nm As Name
On Error Resume Next
For Each nm In ThisWorkbook.Names
If nm = "Print_Titles" Then Resume Next
If nm = "Print_Areas" Then Resume Next
nm.Delete
Next nm
On Error Goto 0
End Sub
I then used the name manager to delete hidden names.
Unfortunately some of the names are corrupted...
Name Manager prompts me to change the reference style to R1C1 to rename those corrupted names... but I tried every combination to rename them, but it won't work.......
Here are examples of what I tried (as new names for corrupted names): ...
Delete Range Names
Nov 8, 2008I inhereted a spreadsheet where the designer used range names for all formulas. i hate range names. is there any way i can delete all range names and have all formulas go back to showing cell references instead of range names? When i just go through and delete the range names, i get formula errors.
View 9 Replies View RelatedDelete All Names In A Workbook
Aug 13, 2006Delete All Names in a workbook. Maybe delete names one time?
View 2 Replies View Related
