I have a sheet that I will activate by clicking on the tab.
In that sheet I have a code Worksheet_Activate / Call Summary / End sub
The problem is that the macro Summary this sheet get deleted and a new sheet
created,so I can use only one time this Worksheet_Activate.
I created with code to copy a template, hide that template, and pop up a box to rename the copy, I noticed she clicked "Cancel" on the InputBox. When she did, she received an error (400). What I would like to do is when the "Cancel" button is clicked, the newly created copy would be deleted. Is this possible?
Here is the code for my full "Create New Project" sheet procedure:
Sub CreateNewProject()
'This code will copy the Project Data sheet, hide it and then
'rename the new copy to the MSA number. Code also prompts user for
'MSA Number and fills that in on the form.
Dim RenameSheet As String
Dim oSheet As Worksheet
With Sheets("Project Data")
.Visible = -1
.Copy After:=Sheets("FHWA Quarterly Report")
End With...............
I am trying to write a simple macro to copy a drop down list I created in cell O2 and then paste in the same sheet. I need it to paste starting in cell A2 and then move to A4 and so on for every even row cell through A9778. I would also like it to keep a border around the cell. I can't find direction on how to tell it every even cell or defining x and then doing x + 1...
View 3 Replies View RelatedExample, I have a sheet named DATA1, I want to add a new worksheet, copy a certain range from the DATA1 sheet to the new sheet and rename it the same name DATA1 and delete the old DATA1 sheet.
Also, the sheetname will be unknown, the macro must get the sheet name first.
macro to skip delete sheet question. i have this as part of my code
View 2 Replies View RelatedI have a macro that loop over 15 sheets and count the blank fields in these sheets.
I was trying to find a macro that delete these sheets that has the count = zero
I want to delete a sheet in a macro but when I run the macro, I always get a message warning and I have to answer the msg box to delete the page. Below is the macro command I am using.
Sheets("Tel").Select
ActiveWindow.SelectedSheets.Delete
I have created a button name "Add Power Source" on excel sheet that adds a table and a button(named "Add Row") to the sheet.Whenever the user clicks the "add power source" button a table and a "Add new row " button is created .This "Add new row" button is used to add rows to the table.
Now suppose the user has pressed the "add power source" button 5 times,so that there will be five table on sheet and each having a "add new row " button associated with it.When the user wants to add a new row to the table 2 say .How will I come to know in which table the rows are to be added using VBA.
I attach an example worksheet with the code I have thus far.
In my workbook I have other sheets, one of which changes and updates a specific one each time a new client's data is entered on said other sheet. Because I want to save the specific client's data and not lose it when another client's stuff is entered on this other sheet, I copy the sheet where the data is summarised (I called this sheet "Sheet to Copy From") to a newly inserted sheet and use Paste Special, Values Only to change all functions /f ormulae / Links ect to values.
I then change the name of the sheet to the name of the client.
I then use this sheet name / cell value to polulate a range on another sheet (Next Empty Cell) as a Hyperlink to the newly created sheet above. This sheet I called "Table of Contents".
how to code the hyperlink. Using Macro Recorder uses the specific case's names, but the Tab name to be used as Hyperlink value will always be the name of a new client,
Is there a macro I can write that will delete all spaces in all the sheet names in a workbook?
View 4 Replies View RelatedI have been able to put together a pretty hefty MACRO. I found out that some of the files I am importing may result in no data due to the manipulations I am doing. This causes a problem when I try to subtotal the data on each sheet. Is there a way to have the MACRO delete a sheet if cell a2 is blank and then continuw with the rest of the MACRO?
View 9 Replies View RelatedI am trying to write a macro where it will delete rows in Sheet A if any condition is found in the row which is based of conditions in Sheet B.
Sheet A :
Column A Column B Column C Column D
1234 ABC tyu 4588
asd qwe www 4455
zxc zdaa 1234 4441
ghj llll 1111 poo0
Sheet B (where i kept my conditions in Column A: )
Column A
1234
1111
(and many more....)
the end results will be the Row 1 and row 4 will be deleted. I have tried to google but most only contains deleting rows with a specific conditions.
I want DELETE the rows that contains 0 (zero or -) in column F (SALDO BRUTO), when I click the Button (Clear). And How I can copy from this sheet to a new sheet in this workbook, but the names of new sheet automatic rename to next date or 2, and next when I click the Button "Copy to New Sheet".
View 2 Replies View RelatedI have a Macro which deletes a sheet called "Pre selection" with:
Sheets("Pre selection").Select
ActiveWindow.SelectedSheets.Delete
It asks me every time if I am sure and I have to click to continue. Is there any way to remove this prompt or set it to continue without my intervention?
I have one sheet that have +/-5000 data in 4 table ... all table is fill with just only 2 column, first column is Code Number and second column is Quantity.
There are many duplicates of different entries in Column 1st in all table range and I need to add up their quantities to new table in new sheet...
This is for example:
(Sheet1 name="INPUT") (table1=A:B) (table2=E:F) (table3=I:J)
A B E F I J
AB123 100 ABC123 20 AA1 10
AC278 50 BCD547 30 AA2 10
AB123 30 FGE988 30 AB3 10
DE586 120 ABC123 50 AA2 10
RE158 80 BCD547 120 AA1 10
DE586 50 ABC123 70 AD4 10
Then I want to use macro vba to create new sheet(Summary Report),copy,paste,sort and sum all duplicate...
It should look like this
(Sheet1 name="Summary_Report")
A B E F I J
AB123 130 ABC123 140 AA1 20
AC278 50 BCD547 150 AA2 20
DE586 170 FGE988 30 AB3 10
RE158 80 AD4 10
I am trying to adapt a macro which deletes all rows in Worksheet 1 where the date in column K differs from a date in Worksheet 2. The date in Worksheet 2 will change each day.
I think the macro below could be used, but don't understand how to replace the "Value = ":70:" with a reference to the master date in Worksheet 2.
Sub test() Dim lr As Long, i As Long lr = Range("A1").End(xlDown).Row
For i = lr To 1 Step -1 If Cells(lr, 1).Value = ":70:" Then
Cells(lr, 1).EntireRow.Delete End If lr = lr - 1 Next i End Sub
i want to delete any sheet after sheet called "Summary"
View 1 Replies View RelatedCode to copy the sheet that get selected by if-then-elseif statement and paste in a new workbook, save the workbook as temp, email it and delete it,
sub sending_mail
Dim OutApp As Object
Dim OutMail As Object
Dim rng As Range
Dim DataWB As Worksheet
[Code] ......
EXAMPLE: Complete Sheet called "Day1". When day1 is complete you click on button and it then copies itself and creates and renames new sheet to "Day2", then when "Day2" is complete you click on button and it then copies itself and creates and renames new sheet to "Day3", and so on and so forth to "Day30".
View 9 Replies View RelatedI have attached a 97-2003 .xls file with data for multiple store locations on sheet 1, and the desired result on sheet 2. I am actually using excel 2007, but I dont think I need any special features that it provides.
I will try to explain the issue here without opening the attachment.
Here is an example of the Data on Sheet1
I am currently using a macro to copy a sheet from a closed workbook in to my current workbook. However this copying is based on the sheet name. At present when I run the following code
View 11 Replies View RelatedI am using Excel 2010 and I have a password protected workbook with password protected sheets that uses several macros. Most of them, in order to run, have to un-protect the sheet and then re-protect it again. This has been accomplished easily enough by adding ActiveSheet.Unprotect Password:= "mypassword" and ActiveSheet.Protect Password:= "mypassword" to the appropriate places in the script. All of my macros, which do various things like sorting and moving data, deleting blank rows, displaying dialog boxes containing warning messages etc. run fine.
My problem is this: when I password protect the sheets manually, I have checked the following options in the "Protect Sheet" dialog box. Under "Allow users of this worksheet to" I have checked 1)Select unlocked cells and 2)Format cells. After entering my password and closing the dialog box my sheet is protected, but I can edit cells in the manner my allowances permit. However, once I run any of the macros that un-protect and re-protect the sheet, I remain able to select and edit unlocked cells (practically, for my purposes, this means that I can input data which will appear in the default font size and color of the sheet) but I cannot format cells (which, practically, for my purposes would allow me to occasionally change the font color and size of the data). Naturally, after running a macro, the other cell-formatting options are unavailable to me as well. Is there any way to get my manual selections to remain in place after running a macro that functions as mine do? Or is there any way to make my manual selections the default settings for a protected sheet?
I am running excel 2010 with windows 7. I created a macro in sheet 1 and I wish to activate the macro from sheet 2 using a form button. I have entered the code below. I know how to perform this function on a more simple macro like adding names to cells. This code is a bit more complex I just dont know where to start.
Code:
Sub LoanData()
'
' LoanData Macro
[Code].....
i need a macro that will compare the p'folios in sheet "Data to Sheet Workings, and then list the p;folios which is in sheet Data but not in workings in Sheet "New", so in the example below this would be ETSTSA ...
View 9 Replies View RelatedI need a Macro which pulls the data from different sheets of excel (which is not formatted properly) to Main Sheet. Also some of the columns will not have the same names, so macro should handle this exception as well.
View 8 Replies View RelatedI am trying to take the tables you will see in the dummy page on the second and third sheet and have them output onto the first sheet based on the parameters of the drop down menus. Is there a way to have a button on the first page that controls a macro to do this?
View 4 Replies View RelatedI need to create a macro that will scan a spreadsheet for the number of sheets and then pull data from the same places on each sheet in order to create a summary sheet. Let me try to explain a little better.
The spreadsheet I'm working with has a separate sheet for each new deal our company makes. Each of these sheets is in the same format - we use a template and fill in the data based on that whenever a new deal emerges. The sheets contain basic info about the deal in the first few rows and columns, then some narratives with dates describing the progress of the deal, and then a list of issues and whether or not they have been resolved. The problem is, each of these sheets contains too much info for a quick, high-level overview with the bosses so they've asked me to create something that will pull the basic info, the most recent narrative, and any unresolved issues from each sheet. This way, each time there's an overview scheduled with the bosses, the macro can be run and it will create a new sheet with data from each sheet in the workbook.
I'm trying to create a copy of the active sheet and then rename the new copied sheet to what's in cell O4, which is a formula (see below) and then paste value cell O4 in B3 of the copied sheet. However, when I run this macro it doesn't seem to like the second line where I am renaming the sheet (run time error '1004').
"O4" =DATE(YEAR($B$3),MONTH($B$3)+1,DAY($B$3))
Sub NewMonth()
ActiveSheet.Copy Before:=Sheets(Sheets.Count)
ActiveSheet.Name = Range("O4").Value
ActiveSheet.Range("O4").Copy
ActiveSheet.Range("B3").PasteSpecial Paste:=xlPasteValues
End Sub
Can I create data validation list of the names created in the name box or of the sheet tab names?
View 5 Replies View RelatedHow can I stop my macro from changing onto sheet top sheet and flickering away like mad??
View 2 Replies View Related
