Macro To Delete Rows In Which All Cells Contain Same Or Single Value?
Sep 3, 2013
I need a macro to delete each row in which all cells contain the same value, always starting in cell G2 and going out an indefinite number of cell's. So, for one run, the range could be G2:BU2 and another it could be G2:PW2. Also, the number of row's is indefinite.
And an added complexity: I need it to ignore the cell in this search process if the cell contains "NC" - so if all the data in the row is the same except for a few that say NC - then it gets deleted. If the any of the cells in the row have other values, then that row does not get deleted - even if it contains "NC".
View 2 Replies
ADVERTISEMENT
Sep 25, 2013
I would like code that will delete all rows where there are blank cells in Col D from row2 onwards.
View 2 Replies
View Related
Mar 7, 2014
Each day I am going to have a list of about 300 different ID numbers, which i have already got a macro for creating, that outputs them into a single column on a sheet.
The next challenge Ill face now, is that I'll have a list of maybe 500 ID numbers in another spreadsheet.... I need a way to basically tell excel to keep rows that contain the numbers in 1 column on the list of 500, that correspond with those on the list of 300.
Numbers that are not found on the list of 300 ID numbers, must be deleted, along with the entire row.
I essentially need a macro that runs something like this that i found online, but instead of it just looking for the word "apple" as rows to delete, i would need it to check to see if the number is one of the 300 on my list.... and delete the row if it is not on the list
PHP Code:
Sub Delete_Rows()Dim rng As Range, cell As Range, del As RangeSet rng = Intersect(Range("A1:C20"),
ActiveSheet.UsedRange)For Each cell In rngIf (cell.Value) = "Apple" _ThenIf del Is Nothing ThenSet del = cell
Else: Set del = Union(del, cell)End IfEnd IfNext cellOn Error Resume Nextdel.EntireRow.DeleteEnd Sub
View 3 Replies
View Related
Mar 5, 2009
I'd like help in creating a macro that deletes an entire row that has emtpy cells in col B, C & D in the same row.
So for example if I have empty cells in b3,c3 & d3 I'd like the row deleted.
I've used the code below for just column B but I need to include column C & D as well. I tried putting Columns("B:D") but it deletes everything.
View 14 Replies
View Related
Jun 10, 2014
I need to delete a certain range of Rows in a single column
View 3 Replies
View Related
Jun 10, 2009
I know it can delete entire rows based on the value of single cell, I just don't know how to do it. So what I need is a macro that will delete an entire row if the value in a particular column = 0.
More details: ....
View 9 Replies
View Related
Sep 21, 2009
I have seen many threads on how to delete rows with no data in them (empty rows).. but I have a spreadsheet that has large "chunks" of column data separated by random empty cells. (It is like this from earlier manipulation of summing similar cells...)
Some columns do not have any empty cells and some have a many empty cells. I only want to shift the cell directly beneath it up, and only concentrate on a single column at a time.
So my main questions is:
How do you delete single cells, in a single column, and shift the data below up?
View 2 Replies
View Related
Mar 6, 2008
I'm importing some data from an HTML table into excel, it all formats pretty well except that some of the data appears on multiple rows.
A B C
1 01.02.06 John
2 Bob
3 Sam
4 02.03.06 Jim
What I need:
a b c
1 01.02.06 John, Bob, Sam 3
2 02.03.06 Jim 1
What I need to do is get all the items in the colum B which are listed under the same item in column a, in the first case John Bob and Sam and put them all into the same cell. I then want to delete the empty rows. It's important that this is done by testing to see if column A is blank, rather than using the date.
then in column C I want to count the items in column B,
ideally then repeat the script for the whole sheet.
Not a clue of the type of syntax I should be using though!
In fact there's probably a better way of importing the data from the HTML so it doesn't even need to be done this way! of course I'm oblivious to it. Auto Merged Post Until 24 Hrs Passes;Thinking maybe I didn't make myself properly clear....
If a cell in column a is empty then it means the item in column b needs adding to the end of the item in the row above in column b.
I then want to count the items in column b.
View 9 Replies
View Related
Mar 16, 2007
1st - Need a macro to change a range of cells colours based on a single cell having a value greater than 0.001. ie. cells A1 - G1 need to change to grey based on cell F1 having a value greater than 0.001 entered in it?
2nd - Also a macro for deleting the text contents of cell C1 based on cell F1 having a value greater than 0.001. Therefor if cell F1 has a number greater than 0.001 it changes the colour of celss A1 - G1 and also deletes the text in cell C1?
View 2 Replies
View Related
May 10, 2012
I need a macro that can look at multiple (say three) rows and delete those rows if they match another three rows in the worksheet.
For example:
1 0
3 1
5 7
4 4
6 5
8 3
1 8
5 2
3 9
6 5
8 3
1 8
7 5
If three rows are the same, then one set is deleted (it can be either bottom or top set). I would like to do this for rows 1-500 in the worksheet.
View 1 Replies
View Related
Nov 5, 2006
Need to solve my problem in the thread "Type Mismatch Error Message". Now a new problem has come up in the same code, so - according to the rules - I've started a new thread. (This one is most likely due to my poor knowledge of VBA syntax).
Sub Delete_invalid_rows()
Dim i%, j%
Dim Nr%, valid As Boolean, BYPdata As Boolean
Dim ar1 As Variant
Dim ar2 As Variant
Dim ar3 As Variant
Dim ar4 As Variant
Nr = 20
ar1 = Array(11, 14, 19, _
20, 22, 25, 26, 27, 28, 29, _
30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, _ .................
View 2 Replies
View Related
Jul 18, 2014
I have a sheet with rows that extend to about Column AT. In some of the rows, all the cells are populated with "--". I want to delete these rows. Other rows have "--"s but not in every cell. I tried to remove all the "--"s then running this code:
For t = 2 To Workbooks(WorkbookNm).Sheets("--").UsedRange.Rows.Count j = CStr(t)
If Application.CountA(Workbooks(WorkbookNm).Sheets("--").Range("A" & j).EntireRow) = 0 Then
Rows(t & ":" & Workbooks(WorkbookNm).Sheets("--").UsedRange.Rows.Count).Delete
GoTo Step15__2:
End If
It worked, but I had trouble re-adding the "--"s. So I'm wondering if there is a simple way to modify the above code, so that it looks for and deletes rows with only "--" and possibly nothing in the cells (e.g. Column AU and on)?
View 9 Replies
View Related
Jun 29, 2009
I'm trying to create a macro and having absolutely no luck with it. I want the macro to run through all the rows and delete all rows where every number in that row is less than a specified number (.03 for this particular case).
View 19 Replies
View Related
Apr 24, 2008
I m trying to develop an IF function that will go through each cell in a column and delete an entire row based on whether the Cell Value is identical to the one above or not. What i have thus far:
Sub RemoveDuplicate()
Dim i As Integer
Sheets("Pre-Allege").Activate
i = 2
Cells(i, FindCol + 2).Select
Do Until IsEmpty(Cells(i, FindCol + 2))
If Cells(i, FindCol + 2) = Cells(i - 1, FindCol + 2) Then Rows("i:i").Delete Shift:=xlUp
Else
i = i + 1
End If
Loop
End Sub
View 4 Replies
View Related
Mar 26, 2009
i wrote this macro and want to delete last two rows on active sheet this macro.
Sub deleteLast2Rows()
With ThisWorkbook.Worksheets(1)
Dim rowNum As Integer
Dim m As Range
rowNum = 2
Set m = .Range("A" & rowNum)
rowNum = rowNum - 2
EntireRow.Delete
End With
End Sub
View 2 Replies
View Related
Oct 2, 2008
I have a huge spreadsheet that I want to be able to sort through and delete the unwanted rows. I want to do a search for anything in column C that equals 2225 including the next row after and delete the rest. Here is an example...
View 3 Replies
View Related
May 22, 2007
I recorded this macro but I need it to delete any Rows that have the word "Normal" in column F
Sub Count()
'
' Count Macro
' Macro recorded 5/22/2007 by pricci
'
'
Sheets("Alarm Log").Select
Sheets("Alarm Log").Copy After:=Sheets(2)
Sheets("Alarm Log (2)").Select
Sheets("Alarm Log (2)").Name = "Count"
Cells.Select
Selection.Sort Key1:=Range("F2"), Order1:=xlAscending, Header:=xlYes, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
End Sub
View 9 Replies
View Related
Sep 10, 2007
I want to delete the rows if in "Column L" value is "Yes".
View 9 Replies
View Related
Dec 19, 2007
macro to delete certain rows from a sheet based on the value of a cell?
I'm tryin to get it so if the value in "F" is NOT 150, 151, 152, 153, 154, then i want that row deleted.
this should leave me with data that contains either 150 - 154 in column F.
View 9 Replies
View Related
Jul 1, 2008
I have a table of data A2:H1000 (this gets longer every week). Within that data every so often i have a row which is blank from A:G, but has a value in H.
I want to create some code that checks the rows and if the cell A in the row is blank, to delete the entire row.
View 9 Replies
View Related
Sep 19, 2008
If I have a table (see below), is it possible to create a macro to delete rows that do not have defined data. In the example below, I would want to delete rows 4 through 7 as there is no date in Columns B through D.
A B C D
1 2008 100 200 300
2 2009 500 600 700
3 2010 800 900 1000
4 2010
5 2011
6 2012
7 2013
View 9 Replies
View Related
Mar 4, 2014
How can I delete all rows that have a cell that starts with the letters APP
View 3 Replies
View Related
Mar 9, 2012
What is the fastest way to delete every cells that has data except for the first two rows?
I currently have this code but I find it a bit slow (and everything is replaced by column A to Z [which meets my need right now]).
Code:
Sub delete()
Application.ScreenUpdating = False
lastrow = Activesheet.Cells(Rows.Count, "A").End(xlUp).Row
Range("a3:z" & lastrow).delete
End Sub
There must be a better way.
View 5 Replies
View Related
Feb 27, 2013
If I have a column of data called "ColStream" and want to delete all rows that don't contain the string "Production", whats the best way to achieve it?
I have tried a for each loop, with INSTR but as this moves down a cell from the cell whose row has just been deleted, skipping the "NEXT" row in the range, it doesn't give the correct results.
Incidentally, the end game is to copy all the remaining cells to the cell immediately below a cell called "StreamsDatabaseStart" in a worksheet called "ProdStreams" should anyone out there be feeling particularly charitable!
View 4 Replies
View Related
Oct 18, 2006
I want to compare the data in column B and C of Row 2 through X (X being up to 20,000), and if BOTH B and C are blank, delete the entire row.
View 4 Replies
View Related
Jan 8, 2007
I need a Macro that will delete rows within a specific range that contain blank cells or preferably delete the rows where the first cell in the row contains a blank cell.
View 9 Replies
View Related
Jan 17, 2007
I went to the Macros page and pulled this macro to remove rows if they have blank cells:
Sub DeleteBlankRows2()
'Deletes the entire row within the selection if _
some of the cells WITHIN THE SELECTION contain no data.
On Error Resume Next
Selection.EntireRow.SpecialCells(xlBlanks).EntireRow.Delete
On Error Goto 0
End Sub
I ran this and nothing happened. Does anyone have a fix or perhaps a better way to make this happen?
View 2 Replies
View Related
Apr 18, 2014
I have a formula that does exactly what I need , it fetches negative stocks from sheet 1 , but the formula places the data exactly on the same row where the negative is , thus there are a lot of in between data not required , Yes I can copy paste special values and remove blank rows , but the macro will do it faster
View 13 Replies
View Related
Jan 15, 2009
I have put together a macro that will delete rows (called DeleteUnwantedRows) in a spreadsheet that contain the phrases "no further action" and "not applicable" ... However the macro does not appear to be working.
View 2 Replies
View Related
May 28, 2009
What I need is a macro to delete a row or rows for a specific range of cells (eg. E20 to E58) when the cells in that range column E is = blank. The cells in column E is formated with a currency sign $. Deleting the row should shift up all rows below. I need to run this macro manually. Excel 2002 SP3.
View 9 Replies
View Related
