I am trying to write a macro that will make the bottom cell in a column equal to the top cell. The top cell will not always be in the same row and there won't always be the same number of cells.
View 1 RepliesI have a monthly forecast document that is updated by an operator monthly. At the end of the month, the operator presses a "Copy Accrual" macro that copies accruals for the month and stores them on a seperate tab. After sending the document back to the Finance team (necessary step due to software complications), Finance will send the operator back an updated file at beginning of next month. The operator than presses a "Paste Reversal" macro that is supposed to input the negative of the accrual stored in the seperate tab. The problem is that it is posting as the same value (not negative of value). I tried recording a Macro to fix this, but it did not work. An example of the code that came up with is:
Worksheets("Weekly Forecast").Select
Range("B9").FormulaR1C1 = "=-Accruals!RC[-4]"
Range("H9").Select
Selection.Copy
Range("H10:H33").Select
ActiveSheet.Paste
Thoughts on what to do? I think the two things that are throwing me off is the negative, and moving between the different sheets.
I need an easy code that searches all of column A and deletes the entire row if the cell has the value "-". It needs to find the last row of data using something like LastRow = Range("A" & Rows.Count).End(xlUp).Row
View 4 Replies View RelatedI am trying to make my textbox on the userform equal a cell value in a column. I need the userform to look at the last cell that has a value in a column and display that value into the textbox on the userform.
Ex. I am starting my data from Cell "O8" and the last possible row would be "O51" Starting with O8 I need my textbox in the userform to read this cell value. After each entry the next row in Column O will have a value, so I would need my userform textbox to read cell "O9" value the next time the user form opens. Here is what I got thus far:
[Code].....
It gives me a Compile Error: Invalid or unqualified reference.
I am looking for a way for a cell to equal another cell but the cell that it looks at is controlled via another cell.
So, for example, cell A1 I type in “E5” and this tells cell B1 to display the contents in cell E5.
Is there way I can copy the BOTTOM cell amount in a specific column, to another specific cell in another workbook?
I update a worksheet with a new row of data each day. I want to copy only the last (bottom) entry from one column over to a worksheet in another workbook. I'm hoping I can just put something in the cell I want to copy to, to reference the bottom cell with data I'm copying from.
I would like to create a VBA code where it will delete the entire column if the cell value is equal to value in D2
For example:
Sub Delete_Columns()
Dim rng As Range, cell As Range, del As Range
Set rng = Intersect(Range("G2:S43"), ActiveSheet.UsedRange)
For Each cell In rng
If (cell.Value) = D2 _
Then
If del Is Nothing Then
Set del = cell
Else: Set del = Union(del, cell)
End If
End If
Next cell
On Error Resume Next
del.EntireColumn.Delete
End Sub
======
But I think this line is wrong but I am not sure how to fix it - If (cell.Value) = D2 _
A column of cells can be 1o different shades of green according to their value (achieved by using conditional formatting.) I want to arrange that at a certain time all the cells of a part of the row of a formatted cell are the same colour.
View 4 Replies View RelatedHow can I multiply let's say A1 to 10 if B1 = 5
or multiply next cell like A2 to 15 if B2 = 10
I am working on a proforma statement, REFER THE ATTACHMENT
A B C D E F G H I J Q
1 jun'14 jun'14 jun'14 jul'14 jul'14 jul'14 Aug'14 Aug'14 Aug'14
2 beg. Inv Purchas Unit Sold Beg. Inv Purchas Unit Sold Beg. Inv Purchas Unit Sold
3 foundation 4 10 11 3 15 13 5 16 18
4 Lipstick 4 10 11 3 15 13 5 16 18
5 Shimmer 4 10 11 3 15 13 5 16 18
6 Powders 4 10 11 3 15 13 5 16 18
7 Nail Lacquer 4 10 11 3 15 13 5 16 18
8 Eye Shadows 4 10 11 3 15 13 5 16 18
9
10
11 Total Purchase for june to aug 2014
12 Foundation ??
this is just an small sample of what i am working on i have got purchases, cogs and ending invenory for 2 years Products wise i want to add purchases for the particular product.
i.e. if for above data i want to find out the foundation purchased through june 2014 to aug 2014 what will be the formula
is there a formula i can use to sum the sales revinue column of the attached per month into the yellow highlighted cell @ the bottom?
View 2 Replies View Relatedif a certain cell does not equal zero i want a macro to run. But i'm having trouble getting the logic right. here's what i have so far
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Range("u82").Select
If Active.Selection 0 Then
Call unhide_addABBR
ElseIf Active.Select = 0 Then
Call hide_addABBR
end sub
I need to figure a way to make to cells with dates equal each other if the
day,month and year are the same but are placed into a cell at different times during the day. "Making Date Now () = (06/29/09) In another cell". Therefore, A1= Now() and E11 = 06/29/09
How to correct my formula because it does not work?
Here the formula: =COUNTIFS(Data!C2:C24005,A17,Data!M2:M11149,"<=0")
I need to insert the formula in column C (Findings tab) which counts the rows in Column M (tab named "Data") that equal A17 (Column A in "Findings" tab) and which are less or equal zero. In addition if I drag the formula down I want to only the values be entered in highlighted in blue cells in column C (SKUs With Zero Sales in "Findings" tab) and empty cells in not highlighted cells. I attached images of these two tabs: Data and Findings.
I'm trying to set a cell on one sheet to be equal to the product of two cells on another sheet. The problem is that one of the cells on the other page is dependent on the variable T. This is what I've got and it's giving me errors
Worksheets("Output").Range("K14").Formula = "Worksheets("Calcs").Range("D17")*worksheets("Calcs").Range("D17").Offset(10+T,0)"
When I record a macro it gives me this, but again, I need the last cell in terms of "T"
ActiveCell.FormulaR1C1 = "=Calcs!R[3]C[-7]*Calcs!R[14]C[-7]"
I've got a table of different values in column A.
I'd like the cell D2 ("order") to show up at column B next to the closest value of 35.00 of column A.
Consequently, how to make "order" meet the closest several value of 35.00?
I've attached a xlxs file with more detailed description.
Ex_closest_11_05.xlsx‎
how to make the data look like a table with three columns. Other than the date, it is space delimited. I have a tracking spreadsheet where Column A is populated with dates for the year. Column C contains daily values.
I don't always start entering daily values on the first day of the year, e.g., this year the first value in Column C corresponds to March 9. All values in Column C are contiguous - there are no blank cells until the value in Column A is greater than today's date code. I would like to use a formula (rather than VBA) to look down Column C and find the first non-blank entry where the value in Column A is less than or equal to today(). In this case, the formula should return the value for March 9, 2008.
CREATE TABLES LIKE BELOW?Column A Column B Column C
March 1, 2008Saturday
March 2, 2008Sunday
March 3, 2008Monday
March 4, 2008Tuesday
March 5, 2008Wednesday ...................
Formula for this? If a cell in column T is empty, use column U (but make it negative)??
View 2 Replies View RelatedI can assign a number of copies to print by adjusting ActiveWindow.SelectedSheets.PrintOut Copies:= , but what I want it to have the number of copies auto adjust to the value of a cell that contains a formula. I was hoping it would something as simple as Copies:=cell but no luck...
View 2 Replies View RelatedSay I have data in one tab that is cells
A9, B9, C9, D9, etc.
On the next tab, I want the cell in D5 to equal A9, D6 to equal B9, D7 to C9, etc.
I can't seem to lock the cell correctly to do this. If I use =A$9 in cell D5 and then copy down in cell D6 I'll get A$9 also, but if I use $A9, in D6 I'll get $A10.
I would like to know if there is a way to expand the selection of cells from the current cell you are on to the very bottom cell available in the spreadsheet.
For example, I want to apply a formula from A12 - the very last A cell row in the spreadsheet.
in my spreadsheet (attached), i want it so that when someone clicks a button, it will fill in the next available cell in column A. For example, when I click on the "Create" button on the green NIPRNet side, then it'll fill in the next available cell in column A (cell A4) with "(N) Created Account". Then, if I click on "Unlock" on the red SIPRNet Side, then it will fill in cell A5 with "(S) Unlocked Account". and so on, and so on, down column A.
At the moment, i have it so that all the cells in column A are dropdown menus. But I want to eliminate the drop-down menus and use buttons instead.
I have read meanwhile dozends of articles and comments about absolute and relative cell references.
But I found nowhere an example on how to make a the column part of a cell reference variable and the row absolute.
Is
K$10
a valid expression?
In opposite to $K10 is must work this way
i want a macro that make acircle around number in acell in excel debending on the nuber that the student given that under 14 has take acircle over is none
like that
this is another example code i fill acell with gray color
----------
For Each cell In Range("q6:q580")
Select Case cell.Value
Case Is >= 16
cell.Interior.ColorIndex = 2
Case Is < 16
cell.Interior.ColorIndex = 15
End Select
Next cell
------------------
a macro script that will make cell in a certain range to zero?
In my worksheet, I have the user input numbers between B2 and B15, C2 and C15,... down to F2 and F15. I want it so that if the user clicks a "button," the macro resets all the cells in the above mentioned range to zero.
I would like to make a macro that loops another macro and changes a value in a cell, like such:
Run macro
if cell A1 = cell A2
Stop
Else set value in cell A1 -0.1
Loop
How exactly would i do that?
I have a little bit:
Sub Macro2()
Call wantedmacro
With Range("A1")
If .Cells(1, 1).Value = "A2" Then Exit Sub
Else Range("A11").Value = (A1-0.1)
Call Macro2
End Sub
Does anyone know how to use a macro to make a cell background blank if it is not orange or dark blue?
View 12 Replies View RelatedI have a sheet in Excel 2004 for Mac that is a patient list with over 2000 patients. I need a rule that will compare values (patient IDs and responsible party ID) in two adjacent cells, if the values are different, to delete the entire row. The goal is to get rid of patients (rows) that are not the responsible party (responsible party ID).
View 3 Replies View RelatedI am not sure if I am using the correct terminology when I see "array". What I want to do in VBA is what I know how to do in non-vba excel functions (cntrl + shift + enter). For example, I have a range of cells that need to meet one condition ( ""):
Code:
If Sheet8.Range("C" & rw) "" Or Sheet8.Range("D" & rw) "" Or Sheet8.Range("E" & rw) ""...etc Then
How do I bundle this in one package. What you see below is obviously incorrect, but I am trying to accomplish this with proper syntax.
Code:
If Or(Sheet8.Range("C" & rw & ":Z" & rw) "")
Need a Macro to delete all rows containing values less than or equal 300 in column A
View 5 Replies View Related