Make Textbox In Userform Equal Cell Value?
Jan 27, 2014
I am trying to make my textbox on the userform equal a cell value in a column. I need the userform to look at the last cell that has a value in a column and display that value into the textbox on the userform.
Ex. I am starting my data from Cell "O8" and the last possible row would be "O51" Starting with O8 I need my textbox in the userform to read this cell value. After each entry the next row in Column O will have a value, so I would need my userform textbox to read cell "O9" value the next time the user form opens. Here is what I got thus far:
[Code].....
It gives me a Compile Error: Invalid or unqualified reference.
View 3 Replies
ADVERTISEMENT
Jan 11, 2012
how I can make a textbox on a userform an Integer? So that I can add all the variables.
View 1 Replies
View Related
Feb 5, 2014
I am trying to write a macro that will make the bottom cell in a column equal to the top cell. The top cell will not always be in the same row and there won't always be the same number of cells.
View 1 Replies
View Related
Jun 29, 2009
I need to figure a way to make to cells with dates equal each other if the
day,month and year are the same but are placed into a cell at different times during the day. "Making Date Now () = (06/29/09) In another cell". Therefore, A1= Now() and E11 = 06/29/09
View 2 Replies
View Related
Sep 30, 2013
I have a monthly forecast document that is updated by an operator monthly. At the end of the month, the operator presses a "Copy Accrual" macro that copies accruals for the month and stores them on a seperate tab. After sending the document back to the Finance team (necessary step due to software complications), Finance will send the operator back an updated file at beginning of next month. The operator than presses a "Paste Reversal" macro that is supposed to input the negative of the accrual stored in the seperate tab. The problem is that it is posting as the same value (not negative of value). I tried recording a Macro to fix this, but it did not work. An example of the code that came up with is:
Worksheets("Weekly Forecast").Select
Range("B9").FormulaR1C1 = "=-Accruals!RC[-4]"
Range("H9").Select
Selection.Copy
Range("H10:H33").Select
ActiveSheet.Paste
Thoughts on what to do? I think the two things that are throwing me off is the negative, and moving between the different sheets.
View 2 Replies
View Related
Jul 5, 2009
I am looking for a way for a cell to equal another cell but the cell that it looks at is controlled via another cell.
So, for example, cell A1 I type in “E5” and this tells cell B1 to display the contents in cell E5.
View 3 Replies
View Related
Jan 31, 2014
So I know how to make the textbox output whatever a specific cell says, but is there a way to do the opposite? make the textbox the input and have the cell changed based on the input of the textbox?
View 3 Replies
View Related
Aug 23, 2009
I have a form “RiseSpan” with three TextBoxes, “txtInSpan”, “txtDepth” & txtOutSpan”.
I wish to enter values in “txtInSpan” and “txtDepth”. These values are placed in cells A1 and A2. If both “txtInSpan” and “txtDepth” are greater that zero, I want “txtOutSpan” to show the value of cell C11.
View 9 Replies
View Related
May 23, 2014
A column of cells can be 1o different shades of green according to their value (achieved by using conditional formatting.) I want to arrange that at a certain time all the cells of a part of the row of a formatted cell are the same colour.
View 4 Replies
View Related
Mar 23, 2012
I am not sure if I am using the correct terminology when I see "array". What I want to do in VBA is what I know how to do in non-vba excel functions (cntrl + shift + enter). For example, I have a range of cells that need to meet one condition ( ""):
Code:
If Sheet8.Range("C" & rw) "" Or Sheet8.Range("D" & rw) "" Or Sheet8.Range("E" & rw) ""...etc Then
How do I bundle this in one package. What you see below is obviously incorrect, but I am trying to accomplish this with proper syntax.
Code:
If Or(Sheet8.Range("C" & rw & ":Z" & rw) "")
View 9 Replies
View Related
Jan 24, 2014
I have a spreadsheet on sheet 1 with a list of customers and their information. So on column A I have the customer number (i.e. k968, e37, p528,...), on column B i have the customer's name, on column C the street's name, on Column D the house number, on column E the zip code and finally the city on column F.
Right now there are around 600 customers in this list.
I have made a userform with a combobox in which I want to select an existing customer (pulled from the spreadsheet). On the same userform I have textboxes (customer number, name, street, number, zip, city). When I select a customer in the combobox, I want this customer's info to show up in the textboxes. I want to be able to change the info and hit Next to store the changes in the spreadsheet. When I do not select a customer from the combobox, I want to add new info in the textboxes and hit Next to store this info as a new customer. The userform also has a delete button. Then I select a customer in the combobox, this customer (and it's info) should be deleted from the spreadsheet when i hit Delete. So the spreadsheet is variable in length.
View 5 Replies
View Related
Dec 18, 2012
How do I come up with a price that will make my profit and my customers savings equal.
Example:
Retail price $178.99
My cost $113.46
If I charge $142.23 then my profit is $28.76
Customer pays $142.23 plus $8.00 shipping ($150.23)
$178.99 Retail minus $150.23 = $28.76 savings
View 9 Replies
View Related
Aug 6, 2012
Can you make a TextBox equal the value of two Cells without first summing the two cells in the workbook?
TextBox1.value = Range.("B1").Value + Range("B2").Value ???
View 1 Replies
View Related
Jul 14, 2014
I have a userform that my staff use to enter the files they are working on. I have a button they click to launch the userform, then they need to input a 'Track Number' the access the details of the file.
Currently, they enter the track number manually that they see from a list on a sheet.
I have found the code below that enables them to click on the file, listed on the sheet and it automatically launches the userform.
What I am after, is the next step, it copies the track number in the cell they click in, but I would like the code to PASTE into the first textbox the copied Track Number.
VB:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Selection.Count = 1 Then
If Not Intersect(Target, Range("B4:B25")) Is Nothing Then
Selection.Copy
Application.Run "'FOI & ROI Record Management.xls'!Launch.Launch"
[Code]....
View 9 Replies
View Related
Dec 28, 2012
I have a form that is used for updating jobs on a worksheet. I want a txtAssetsJob on the form to display the value that is in a cell in column "E". The row is set up as iRow and is based off of a selection in a cboJobNumber2. Everything else on the Form works great, I just can't get the textbox to display the value.
I have also noticed that I can still put letters into the txtboxes and it copies them to the worksheet. I think I have them formatted correctly.
Code:
Private Sub txtAssetsJob_Change()
Dim iRow As Long
Dim rng As Range
[Code].....
View 5 Replies
View Related
Mar 2, 2009
how to show a value in textbox form. So i have some columns in an excel file , but i want to show the last cell value of the column Amount in the textbox.
View 9 Replies
View Related
Dec 21, 2007
I am creating a user interface for inputing info into a sales order, and then printing the sales forms already pre-filled based on the user's input. SO, I need the user to be able to type text into a textbox that is in a multipage control that is in a userform, and then have it automatically populate a specific cell in my workbook. Seems like this should be relatively simple, but I am just getting started with vba and can't seem to figure this out.
View 3 Replies
View Related
Dec 24, 2007
I am having trouble using User Forms.
I am trying to enter data using User Forms to apply to a specific cell.
For example the user enters text or a number value into a text box and clicks a command button to submit that information into a specific cell. In this case D43.
View 4 Replies
View Related
Jan 2, 2008
How do I refer to the contents of a userform's textbox on a worksheet?
The userform will be opened, edited, and closed by the user. I would like to be able to refer a cell on my sheet to that textbox so that they always have the same content.
View 7 Replies
View Related
Mar 30, 2013
I receive a large file every month with 30K+ rows of data that need to be manipulated manually before I can send it off. Within the data are "chunks" of data that are anywhere from 1 to 90 rows each. Each chunk needs to total 100 or less, and while they do for the most part, some end up over 100 due to rounding (usually 100.02 or so). The rows above and below each chunk are blank, and I currently have a calc to add each chunk, and flag it if it's over 100. Then, I have to go through each of the flagged chunks and manually decrease one of the lines to make the total 100.
Is there any way to automate any or all of this procedure?
I have attached a sample file with two chunks of data. The actual files contains 14 more columns to the left that aren't shown.
Sample.xlsx
View 5 Replies
View Related
May 14, 2014
I am working on a addin UserForm to quickly format cell text, especially only select characters in a cell. I have this functional in a modal setting working with the active cell when I activate the UserForm. What I would like to be able to do is to work in excel without having to close the Userform and have the textbox update with each new cell. I have changed the UserForm properties to ShowModal = false which gets the first half. However the textbox will only show the cell value I started with.
VB:
Private Sub UserForm_Activate()
TextBox1.Text = ActiveCell
End Sub
[Code]...
View 3 Replies
View Related
Jul 25, 2014
I have two sheets. sheet2 is a lookup table. sheet1 is information sheet. i have created a userform where a user inputs data into 3 textboxes and clicks a button. i have the code for transferring the data from the textboxes into row after the last used row on sheet1, columns a,b,c. in columns d and e i have vlookup code that takes the value in column c and performs the lookup function to return values found in sheet2. this all works fine.
I am trying to display the vlookup results in a 4th textbox on my userform.
If I use this code:
[Code] ......
I receive a type mismatch error
if i use THIS code:
[Code] ..........
if works fine!?! what gives?
View 4 Replies
View Related
Apr 19, 2008
I want a floating userform (showmodel = false) to display the results of a cell.
On excell spreadsheet I can assign a cell value to an object/shape, as the cell value changes so does the display on the object automatically.
I want the same results on a userform.
I tried the texbox & using the the controlsource from the properties window, this was only good for one result. for the next result the textbox won't change its value.
As i want this for display purpose only can i use the label for the above problem
View 9 Replies
View Related
Nov 3, 2009
I have two TextBoxes (txtSpan & txtTrib) in a UserForm (frmSizes), when values are entered in these TextBoxes they show (as they are typed) in cells of the spreadsheet. The resulting calculation is in cell B11.
How do I get the value in cell B11 to show in a third TextBox (txtAns) as soon as it is calculated without closing the UserForm or running another code?
View 8 Replies
View Related
Nov 11, 2009
On the attached example, there is a user form with a text box and an enter button.
What i want, is when i press the enter button, the value in the text box goes into cell B2 on sheet1 in the format of "?/???".
View 2 Replies
View Related
Jul 2, 2012
I current have code that fills in textboxes in a userform with values in cells:
Code:
Private Sub CODE_Change()
Dim ws As Worksheet
Dim fm As Worksheet
Set ws = Worksheets(ActiveSheet.Name)
Set fm = Worksheets("Form")
[Code]...
How to I modify the lines under Checkbox1.Enabled = False so that they only take a section (of varying size) of the text in a cell and put it in textboxes in a userform?
ie. The text in a cell is "Outer: A123 ; Inner: B456." I would like A123 to appear in a textbox called OuterColor and B456 to appear in textbox called InnerColor
View 4 Replies
View Related
Jul 4, 2013
Userform I've created. It's not for inputting data, just for displaying and linking to data.
I have a textbox on a userform that I would like to display exactly what is written in cell C5 of sheet1. I don't want the user to be able to edit it, just for it to display the same as C5. Any better way of doing it than using a textbox that would be good also.
View 2 Replies
View Related
Jun 19, 2014
Is there a way to avoid a textbox value from being entered into the same cell on a worksheet more than once.
I am building a BOL(Bill Of Lading) wizard. Within the userform the end user will input the part numbers and quantities to be shipped... it also has a textbox that will hold the PO number that each part belongs to. I have a command button that says Add to Pallet 1. Pallet 1 will be on a row by itself on the excel sheet. Parts belonging to different PO#'s can be on this 1 pallet. When the end user clicks the "add to pallet1" button... the PO textbox (textbox6) value will be sent to (Sheet3) Cell I28. If, for example, PO# 12345 has already been added to (sheet3) Cell I28 and then the end user plugs it in again, i would like for it to be discarded and a message box stating this PO Number has already been accounted for...
so you get a better understanding...
Qty's... part numbers and PO#'s for Pallet 1 will be on row 28. Multiple PO#'s will fit into Cell I28 seperated by spaces and i will do wrap text.
Qty's...part numbers and PO#'s for Pallet 2 will be on row 29...so on and so on...
View 1 Replies
View Related
Oct 8, 2009
I am building a userform which also needs to display current data from a cell in the most recent row of a worksheet. This current data and all userform selections are then to be written to a row in a separate worksheet. I have not been able to properly reference the current data; My (rookie) approach intended to set the ControlSource properties of a TextBox to the desired current data.
Private Sub CommandButton1_Click()
'Begin form
' find last gps reading
Dim LastRow As Long
Dim Source As Worksheet
Set Source = Worksheets("Sheet1")
Set Dec = Worksheets("DecimalForm")
View 4 Replies
View Related
Jul 26, 2007
I have a userform with many textboxes that I am using to collect data which is transferred to a worksheet using a command button on the userform. All data is correctly transferred to the worksheet except for the text box I am using for the date.
The date is transferred from the userform to the spreadsheet but the date is left justified implying that it is text but dates that I have manually entered into the spreadsheet cell are right justified. This may seem picky but I am using a 'count' function within the spreadsheet to determine how many rows contain the date.
I am using the following code which I am entering in the format of dd/mm/yyyy, to to transfer the date to Cell A1 the worksheet 'Results'.
Private Sub CommandButton1_Click()
Worksheets("Results").Cells(1, 1) = UserForm1.Textbox1
End Sub
how to transfer the date to the cell so that it right justified, hence treated as a number within the cell.
View 6 Replies
View Related
