a macro script that will make cell in a certain range to zero?
In my worksheet, I have the user input numbers between B2 and B15, C2 and C15,... down to F2 and F15. I want it so that if the user clicks a "button," the macro resets all the cells in the above mentioned range to zero.
I have generated macro, all I want is when this macro runs on different work sheets it should automatically select the active range based upon column A and copy the formula in the inserted new column B, please see the macro which will make it clear. Basically whenever it is copying a value or a formula it should be for the active range.
View 11 Replies View RelatedI would like to make a macro that loops another macro and changes a value in a cell, like such:
Run macro
if cell A1 = cell A2
Stop
Else set value in cell A1 -0.1
Loop
How exactly would i do that?
I have a little bit:
Sub Macro2()
Call wantedmacro
With Range("A1")
If .Cells(1, 1).Value = "A2" Then Exit Sub
Else Range("A11").Value = (A1-0.1)
Call Macro2
End Sub
I am trying to use the codes below to find text "xmxy" and "xmx" within a column, then try to move the cells between the texts to the right by one column. I believe that the problem for the code below is that
Cells(j, "B").Insert (xlShiftToRight)
or If Cells(i, "B").Value = "xmxy" Then has limitations. I read that when you dim a variale as integer, it only can contain value between -32,768 to 32,767 . But I have more than 32,767 rows of data. I have already set dim i,j, etc. as long, but how do you set the cells range to recognize number larger than 32,767?
Sub ShiftRightbbb()
Dim i As Long, j As Long, lastrow As Long, rowscount As Long, count As Long
lastrow = Range("b" & 65000).End(xlUp).Row
For i = 1 To lastrow
If Cells(i, "B").Value = "xmxy" Then
For j = i To lastrow
Cells(j, "B").Insert (xlShiftToRight)
If Cells(j, "C").Value = "xmx" Then GoTo Nextgroup
Next j
Nextgroup:
End If
Next i
End Sub
I am trying to write a macro that will make the bottom cell in a column equal to the top cell. The top cell will not always be in the same row and there won't always be the same number of cells.
View 1 Replies View Relatedi want a macro that make acircle around number in acell in excel debending on the nuber that the student given that under 14 has take acircle over is none
like that
this is another example code i fill acell with gray color
----------
For Each cell In Range("q6:q580")
Select Case cell.Value
Case Is >= 16
cell.Interior.ColorIndex = 2
Case Is < 16
cell.Interior.ColorIndex = 15
End Select
Next cell
------------------
Does anyone know how to use a macro to make a cell background blank if it is not orange or dark blue?
View 12 Replies View Related1st - Need a macro to change a range of cells colours based on a single cell having a value greater than 0.001. ie. cells A1 - G1 need to change to grey based on cell F1 having a value greater than 0.001 entered in it?
2nd - Also a macro for deleting the text contents of cell C1 based on cell F1 having a value greater than 0.001. Therefor if cell F1 has a number greater than 0.001 it changes the colour of celss A1 - G1 and also deletes the text in cell C1?
I am trying to make a spreadsheet that will have a weekly schedule and will recognize and make some sort of message box or something when a person's name is used twice in the same range. For example, if Smith is in B2 and in B4 then message box. I'm not sure how to do this.
My thought was to make a variable range to check if anything in B2:B7 is equal to say, B3. But the range B2:B7 would have to exclude the cell that is compared, B3. Otherwise it is always true.
I'm trying to edit the predefined range in my macro that changes formulas to values.
My current macro looks like this:
Dim vCol As Variant
vCol = Application.InputBox("Select Column", Type:=2)
If vCol = False Or vCol = "" Then Exit Sub
Set UserRange = Range(vCol & "9:" & vCol & "35")
UserRange.Value = UserRange.Value
End Sub
I tried extending the range to include 48:53, but it doesn't work. I tried with this: Set UserRange = Range(vCol & "9:" & vCol & "35" & vCol & "48:" & vCol & "53")
I have this code which looks information in a table. The problem is that the table is getting every time bigger.
Here the code:
VB:
With Worksheets("Sheet10").Cells(9, 3).Resize(, LastColumnf - 2)
.Formula = "=IFERROR(CONCATENATE(VLOOKUP(Sheet10!C2,Sheet12!$A$10:$C$550,3,FALSE),""."",
VLOOKUP(Sheet10!C2,Sheet12!$A$10:$C$550,2,FALSE)),"""")"
.Value = .Value
End With
How can I write $A$10:LastNewRow... Another problem rises here, LastNewRow might end up being the oldLastNewRow, i think. But maybe since it is getting bigger, there is no problem, I don't know.
Instead of having a static reference like $C$550 I would like to have a dynamic one.
I have never used charts in excel unfortunately. I just finished watching a few tutorials but still a little confused. I have a WS with a list of items I want to make various charts of how do you make a chart that adjusts when new items are added? (thus dynamic data) Do you need a macro to do this or is it just standard by defining a range within that sheet?
View 7 Replies View RelatedI know there is a way to make a range adjust as you add or remove row. I just can seam to remember how to do it .I am using a countif function and later I will be adding more rows I want the countif to look at everything
View 2 Replies View Relatedi need to create a udf that will take a cell parameter and then emulates( i guess thats the best word) the index/match functions. the reason im doing this - and not the index/match - is because excel has ran out of memory on me (external links stuff).
Set XLBookInventaire = Application.Workbooks.Open(strFilePathInventaire & "" & strFileNameInventaire, False, True)
line, the XLBookInventaire is still nothing
i believe its a limitation of the excel udfs, but i dunno how to avoid it or how to make this function work.
Function RechercherProduit1(cell As range)
Dim XLBookInventaire As Workbook
Dim MyCurrentSheet As Worksheet
Dim bNotOpenInventaire As Boolean
Dim XLSheetInventaire As Worksheet
Dim rngInventaire As range
Dim strFileNameInventaire As String
Dim strFilePathInventaire As String
Dim FaceArrInventaire() As Variant
Dim FaceRowInventaire As Long
Dim LastRowBColumn As Long, LastRowInventaire As Long
Dim LastWindowState As XlWindowState
LastWindowState = ActiveWindow.WindowState
Set MyCurrentSheet = Application.ActiveSheet
Application.ScreenUpdating = False.......................................
is it possible to put a message box in a VBA code so that the macro only runs once, else the worbook needs to reopened again for it to work. Is this the best way from preventing the macro to run again?
If i have multiple users, there is always a chance one might accidently press the command button twice.
I am trying to figure out how to make a macro run just once a day -- the first time i open a workbook and then no matter how many times I open that workbook again it does not run......... I know how to get to run automatically when i open the book - just not how to keep it from running again THAT DAY.
Then the next day when i open that book again I want it to run again -- once......and so on..................
I have a sheet where i have many differently named areas (like state1_1 and state1_2) When I doubleclick on a cell then a macro should run with following criteria: 1) Macro will run if the doubleclicked cell is part of any range in the list. Here I mean that names of ranges which belong to that list start with word state (like state1_1 and state1_2). No other ranges should not be in that list. If the cell is not in the range that is part of the list, then nothing should happen.
View 2 Replies View RelatedI have many workbooks which all have a summary sheet called summary, and which are all kept in the same folder (although this folder name/filepath may change from year to year).
I want to be able to set up the column headings and then copy the same set of summary information from each book so that it can then be used for analysis. The cells to be copies derive their value from formulae, it is the value that needs to be copied.
I attach a workbook with the format needed and the source cells. The source sheet will be password protected.
I know this is a question that has been raised before and I have searched the forum but not come across a question that is close enough to work from - my VB skills are appalling.
I would like to run a calculation based on selected active range in sheet. I tried several methods and cannot make it work.
View 2 Replies View RelatedHow do I make my macro tun in a loop through all sheets?
View 10 Replies View RelatedI've got a PDF file that I was hoping to convert into an Excel sheet, but it doesn't look like that's possible, xince I'm working with only Adobe Reader, not Acrobat. Anyway, I need to compare 1 column of this report to another report that IS in Excel. Is there a way to have a macro compare an Excel file with a PDF??
View 2 Replies View RelatedI am looking for is a macro that will search in column B for some codes,example: 0403874700197 but count only the numbers between the 5th (aka 8 ) and prelast (aka 12th number,in this case 9,),so we have the code 87470019. Then every code on column B has it's D column wich has some numbers.
So what will the macro do?Take column B,start with line no 1,take the code and search for similiar,counting only from 5th to 12th letter, in all the workbook ,after find all the similiar codes it will see their D columns,sum them to column D at the line wich it find the first code.Then take line No 2,see if the D cell is empty,pass,if not search for similiar codes in column B...and goes on.It's important to delete the numbers to D cells that already has summed!
I have 2 worksheets - "Results" and "Historical". I am trying to record a macro that copies data from "Results" and then pastes into Historical. The data I want to copy will always be in "Results" A1:A10. When I want to update the macro (which will be weekly), I want it to copy A1:A10 and then paste into "Historical". Simple enough. Here is the problem:
Since this will be updated weekly, the first time I update I will want "Results" data copied into "Historical" A1:A10. The next time I update, I want the data copied into "Historical" B1:B10; then C1:C10, etc. Essentially I want the keep a running total of all of my prior data.
So I need the macro to be able to say something like - paste date into the first available column. If there is data in A1:A10, then paste into B, then C, D. How do I make the Macro variable?
I have a macro called MyMacro which I would like to run every minute starting from 08:00:00 and finish at 14:00:00.
View 9 Replies View RelatedI am trying to make a chart and I just used the macro recording thing to get the code. I have a variable called days.
ActiveChart.SeriesCollection(1).XValues = "='Pair Data'!R2C2:R24C2"
Instead of going to row 24 I want to go to row days+1 so I did the following:
ActiveChart.SeriesCollection(1).XValues = "='Pair Data'!R2C2:R"&days+1&"C2"
how I can fix it? It highlights the "C2" at the end and says Expected End of Statement.
I have workbook template that I use to generate reports from a list of depts. This list is contained in a drop down cell that is a named range in a different worksheet. My current process is as follows:
-Select Dept Name from the list
-Click a command button which is assigned to code that calculates and saves to a file
-Repeat for next report until all reports are generated
I would like to automate this process by producing all reports with a single command with the following functionality:
-The Dept Name needs to be populated in the specified cell containing the current drop down because it drive various vlookups and other formulas
-If possible, I would like to retain the drop down functionality as I would like to have the option of running an individual report or running the “batch”.
I have the following code that I would like to trigger when cells B26:U26 change to something other then 0 due to a formula? How was I make this happen?
[Code] .....
Is there any way witch i can use to make the auto-filter range bigger than 1000 cells?
View 2 Replies View RelatedI want to place the atribute (Date as value): "LastAccessDate" of a file called "!FileSessionStart.nwd" in Sheet1.Cell A2 in my workbook - without opening/accessing" this "C:/so-and-so/!FileSessionStart.nwd" - just want to read and use the last accessed date of it.
How will a macro go finding this atribute of this particular file and place this atribute as value as described?
The filepath of it is valued in celle A1
I would like to make a macro to format all my cells.
I need it to format my last digit to superscrift IF there is 4 digit after decimal point.
How to do this?
