Vba To Select Next Empty Cell In A Column
May 28, 2007How do I code in VBA - I need to select the next empty cell down in a column - ie blank field so that I can transfer the next set of data
ADVERTISEMENT
Select Non-empty Cell In A Column
Feb 5, 2007create a code such that it will select a cell which is not empty and display the content in that cell. For example , in the attached file below i would expect output to be cells(2,5) = 12 and cells(4,5) = 13
View 2 Replies View RelatedFind Next Empty Row And Select Cell In Column A
Jun 20, 2006how i can go about finding the next empty row (and select the first cell of that row (column A))? edit: It probably should be noted that there are cells in Columns A through P. There are rows where all and/or just one cell contains data per row. So i cannot use a " lookup" based on a single column.
View 2 Replies View RelatedSelect 1st Empty Cell In Column That Is Grouped
Feb 27, 2008I am trying to paste data into a sheet immediately following the last weeks data. I went to use an offset function like :
Range("A2").End(xlDown).Select
ActiveCell.Offset(1, 0).Select
However, each weeks data is "Grouped" and therefore the .end(xldown) only takes me to the bottom of the visible rows, and the offset function selects one of the hidden cells.
Macro - Select Last Non Empty Column And Paste Information In Another Column?
Mar 25, 2013I am trying to find a macro that look for last non empty cell in column A and them paste a formula/comment in all cells of column B.
View 3 Replies View RelatedEditting Macro To Select Last Empty Column To Paste Data
Nov 30, 2008I have a macro that automatically takes data from one sheet, copies it and pastes it on another sheet, but I want it to select the empty column that is to the right of the last column to contain data (so basically the next empty column). What code would I enter into editting my macro to be able to do this please?
Also, one thing I've tried to do with my macro is that when I select the data, it's suppose to select from the first name to the last. When doing the actions for the macro, I use "Ctrl + Shift + Down Arrow Key" to make the selection select the bottom of the list. However, when running the macro, if the list is longer (or shorter), the macro selects that number of cells instead of the action of just going to the bottom of the list. For example, if during the actions of the macro, I recorded using the Ctrl + Shift + Down Arrow Key that 50 cells were selected...next time if I have 60 cells, only 50 are selected, even though I used an action command which should select all the cells in that group (in this case being 60). Is there some code I can add to that so this would work correctly?
In case its required, here is the code from the macro:
Find Empty Cell In Column And Apply Required Character To Empty Visible Cells?
May 8, 2014I am looking to find all visible cells in column E that are blank, and then add ''B'' to those empty cells.
I am using code similar to the below:
[Code] .....
Select Rows When A Cell Is Not Empty
Oct 30, 2009I would like to select rows of a range (eg A7:D11) but only those rows where the cell in column C is not empty
View 5 Replies View RelatedVBA Select First Empty Cell Range?
Dec 6, 2013i need a code that will find the first empty cell in column "H" then select go down a row and select upto column "R" so in example range ("H2:R3") would get selected.
I am lost this is all i have so far and it doesn't work
Code:
Worksheets(newname).Range("H" & Rows.Count.End(xlUp).Offset(1) & ":" & "R" & Rows.Count.End(xlUp).Offset(2)).Select
Select Next Empty Cell In Given Range
Mar 1, 2014How do I select the next empty cell in a range?
Say I have myrange=Range("B32:B37"), then I want to put values into the next empty cell in that range.
I want to check if I have a value in B32, and if I have, I want excel to go to B33 and print a string there and the same for 34.
Select First Empty Cell... Doesnt Work
Aug 10, 2009I am using this code to select the first empty cell in column A.
View 9 Replies View RelatedFind The End Value In A Row (right Side) And Select The Empty Cell To Its Right To Paste Data In
Nov 27, 2007i need a method to find the end value in a row (right side) and select the empty cell to its right to paste data in.
problem is the row where this data is may change so using
limit = (row, col).end(XlRight).Col
If Cell In Column T Is Empty Use Column U (but Make It Negative)
Mar 13, 2014Formula for this? If a cell in column T is empty, use column U (but make it negative)??
View 2 Replies View RelatedAdd Value To 1st Empty Cell In Column
Sep 26, 2007I want to have several buttons, that put a certain value in the first empty cell in a specified column in antoher Woorksheet.
View 9 Replies View RelatedVBA Macro Code To Copy Cell A1 And Paste In First Empty Cell Down Column D?
Jul 30, 2013Is this possible using code: Copy Cell A1 and Paste in first empty Cell down Column D. This would be connected to a command button. Both Cell A1 and Column D are on the same spreadsheet.
View 3 Replies View RelatedHide Row If Corresponding Cell In Column C Is Not Empty?
Sep 3, 2012I want to hide the row when value "x" is entered in column C
I tried this code in the sheet, but nothing happens.......
VB:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Column = 3 Then
ThisRow = Target.Row
If Not Target.Value = "" Then
ThisRow.EntireRow.Hidden = True
End If
End If
End Sub
So when a "x" is entered in cell (115,C), row 115 must be hidden. When a "x" is entered in cell((9,C) row 9 must be hidden to, and so on. When a cell in an other column is changed, the macro does not need to start.
Selecting Next Empty Cell In Column
Feb 12, 2010I would like to select the next empty cell in columb A after running this macro, what code do I need to add to this to enable that.
View 2 Replies View RelatedVBA - Paste In First Empty Column Cell?
Dec 9, 2011I need the code to paste my selection in worksheet SORT, into the first available cell in column A. Intention is not to overwrite existing values in column A.
'
Sheets("tis").Select
Range("AC2").Select
Range(Selection, Selection.End(xlDown)).Select
Selection.Copy
Sheets("SORT").Select
'I need the code to paste my selection in the first available empty cell in column A, so I don't overwrite any existing values in column A
End Sub
Finding Next Empty Cell In Column?
Mar 23, 2012This macro
ActiveSheet.Range("A65536").End(x1up).Offset(1,0).Select
when run locates the next empty cell in Column A perfectly. But.... how can I get this to work from a button located at the top of the spreadsheet?
I am only a copy and paste man where macros are concerned!
If Cell In Column Empty Shift Row Right
Jul 23, 2013I need a macro which will manipulate my data like this:
If a blank cell is found in column C, then I'd like to have the contents of that row in column D shifted to the right.
Adding Sum At Each Empty Cell In A Column
Mar 21, 2014I have a column of data that I need to add sum total whenever there is a break in data. The row will vary on a daily basic so a set autosum will not work if I am summing 4 numbers today and 5 tomorrow.
This is what I have: the header titled Sizing is in cell C1 and the remaining data is below that, where I show a space below that is where I have an empty cell.
Column C
1
SIZING
2
320
[Code] ......
What I need is code to sum where there is a blank cell.
Column C
1
SIZING
2
320
[Code] ...........
Populate Empty Column With Value From A Cell
Aug 5, 2007I need a macro to do something very easy. I have blocks of data in an excel worksheet separated by one column. The First block begins in column B and ends in col G. Next block begins in column H and ends in L.
I'd like to copy the value from the first cell in the start of each block (b1) and paste it in the left column seperating each block (left empty column - a1) all the way down to where the data in that block ends (b60), and do this for the next column. So in the above exmaple it would populate column A (range a1:a60) with the value from cell B1.
The number of columns is the same but the number of rows vary. The value to be copied is always in the first row and first colunm of where a data block begins - so in the case above - b1, h1 etc.
Find Next Empty Cell In Column
Apr 24, 2008I am running this macro or some variation of it, depending on the column I need the time entered into:
Sub MacroD()
Dim LR As Long
LR = Range("D" & Rows.Count).End(xlUp).Row
ActiveSheet.Unprotect
Range("D18:D" & LR).Value = Now
ActiveCell.Offset(1, 0).Select
UserForm1.ListBox1.Text = "Time"
UserForm1.ListBox1.SetFocus
' UserForm1.Show
End Sub
When I need to run the same macro again (say I've run Macro D once, and now I need to run it again to get the next time), the forumla overrides the previous timestamp. I need the macro to find the next empty cell in column D and enter the timestamp there.
Sheet1 *ABCDEFGHIJKLMN15Major EventMajor Event Clock TimePUSH#########SPREAD########OUT FWD########REV########OUT REV########Delay########1617Start10:55:09*10:55:27 *10:56:24 *10:56:26 *10:56:19 *10:56:28 ####10:55:59 18W-U10:55:180.40010:56:23 0.01710:56:24 0.03310:56:26 0.01710:56:27 0.01710:56:28 0.03310:56:30 19MTT10:55:26######*0.000*0.000*0.000*0.000*0.000*20**0.000*0.000*0.000*0.000*0.000*0.000*21****0.000*0.000*0.000*0.000*0.000*> Excel Jeanie HTML 4
Find Empty Cell In Column
Sep 12, 2006I want to use the Find method to find an empty cell in the first column. But at the top of the data taqble, there are some empty cells, so I don't get the one I want. So I thought about searching in the column 1 excluding the first cells. Here is my
Dim rFoundCell As Range
Dim rFilledCol1 As Range
'I define the column excluding the cells that contain empty cells
rFilledCol1 = Columns(1) - Range("A1:A10")
Set rFoundCell = rFilledCol1.Find(What:="", After:=Range("A11"),
LookIn:=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, _
SearchDirection:=xlNext, MatchCase:=False)
But I get a Syntax error. Do you know why?
Find 1st Empty Cell In Row From A Column
Oct 25, 2006I am trying to find code that will find the first empty cell in a row and add data in cell left to right. This code is filling all data in the last cell of the row and I am hoping to have it loop through data and fill the first empy cell (M1) and next data placed (m2) and so on
Sub Reportdates()
Dim Grid As Range, Gridcell
Dim Crit1 As Range
Dim Crit2 As Range
Set Grid = ThisWorkbook.Worksheets("sheet3").Range(" dates")
Set Crit1 = ThisWorkbook.Worksheets("Stageing").Range("J1")
Set Crit2 = ThisWorkbook.Worksheets("Stageing").Range("K1")
For Each Gridcell In Grid
If Gridcell.Value >= Crit1 And Gridcell.Value <= Crit2 Then
ThisWorkbook.Worksheets("Stageing").Range("M1").End(xlToRight).Offset(0, 0) = Gridcell.Value
End If
'Exit For
Next Gridcell
End Sub
Goto Last Empty Cell In Column A
Jan 18, 2007I have a multi- sheet Excel workbook and I need to develop a macro based control that, with a single click of a Button in a sheet named REPORT, will take me directly to the last empty cell in column A of a sheet named REGISTER in the same workbook.
View 2 Replies View RelatedRow Number Of 1st Empty Cell In Column
Jan 23, 2008MATCH(3, A:A, 0) will return the row number with the first number '3' in column A. I need to search for the first empty cell in column A.
View 2 Replies View RelatedRun-time Error 1004 (founds An Empty Cell The Value For One Cell Is Copied To The Empty Cell)
Feb 26, 2009I have a workbook with over 900 worksheets.
The macro I have is looping all sheets looking for empty cells in a specific column, and when it founds an empty cell the value for one cell is copied to the empty cell.
But in one worksheet it stops with the error:
Run-time error '1004'
Application-defined or object-defined error
Add Text From Specific Cell To Next Empty Cell In A Column
Oct 29, 2008I am trying to create a macro that will allow a user to click a button, enter a text string that will be an email address into a field and have it added to the first empty row in column A or column C on sheet 1. I have not been able to record this with the macro recorder. The input box will be in cell E9 on sheet1.
View 7 Replies View RelatedFill An Empty Cell With First Data Cell In The Same Column, Next Row(s) Down
Sep 19, 2009I am looking for advice on how to move cells containing data (columns D to K in EXAMPLE A), upwards so that the information lines up with data already existing in columns A to C (to be included as part of an overall VBA routine).
In the upper example data in cell D2 needs to move upto D1, E3 to E1, F4 to F1, G7 to G1 etc and K9 to K1. Now, data on following rows is to move upto row 2 eg: E5 to E2, F6 to F2, G8 to G2.
The first 'block' of data starts at row 1 and finishes in this case at row 9.
The next 'block' of data starts at row 10 and finishes at row 18.
Row 19 shown is the start of the next 'block'. These 'blocks' may have upto 20 rows ....