Manage A List- List Full With Numbers In A Column
Nov 29, 2007
1- I have a list full with numbers in a column. And I want to count how many digits are there in every cells. If digit of the number is less than 7, macro will complete it to 7 digits by adding 0 (zero) at the beginning of the number.
Example: A1 = 85468... A1 value is 5 < 7 in this case our number will be 0085468 (total 7 digits)
PS: sometime, when numbers start with 0 (zero), excel delete all 0 value at the beginning of the numbers. Macro should prevent this error.
2- I have another list with 2 columns which arranged in order. I mean:
A1=xx1, B1=xx2, A2=xx3, B2=xx4, A3=xx5, B3=xx6... etc. One is at A column, next number in B column.
My request is I want to make this list 1 column as arranged.
A1=xx1, A2= xx2, A3=xx3, A4=xx4... etc.
3- Macro will add a new line to the end of the above list with this format:
Z00001xxxx
Z00001 is static
xxxx is number of the full cells of A column plus 1. It will be 4 digits. If count is less than 4, it will complete it to 4 digits.
Example: if there are 15 cells in the list, last line will Z00010016 (15 + 1)
View 9 Replies
ADVERTISEMENT
Jun 5, 2014
Say column A has either numbers or text in each cell, I need a macro to only get each number in each cell that is not a duplicate of a number in any previous cell and list each number found down column B.
View 5 Replies
View Related
Jan 29, 2014
I am trying to create a spreadsheet the will populate/pull all tyre sizes that I have collected from different suppliers.
Tyre Size
165/80 R13
Size
Brand
Cost Price
Selling Price
Supplier
Cannt use Vlookup as it will list only one option.
View 4 Replies
View Related
Nov 21, 2013
I'm trying to create a staff rota which will populate a rota randomly when prompted - I have been trying to find some way of connecting the random lists and the staff names, though this has proved difficult (to say the least!). How best to proceed? I'm also fully aware of the possibility that my present design will also double book people (place then on reception and telephone duty simultaneously).
View 3 Replies
View Related
Feb 25, 2014
Is it posible and how to create a list of barcodes from a list of numbers on the worksheet?
Strokescribe seems to have some ind of solution but the data can't come from the worksheet.
View 8 Replies
View Related
Jun 5, 2014
Does excel 2013 have a fence way to sort a list of alpha numeric numbers and alphabetize in this order A - Z and then 0 - 9.
Ex) Apple, Greg, Rob, Sand, 123, 126, 1000, 2001
View 2 Replies
View Related
Mar 14, 2008
I have a list of people in column A and in B to E there are 4 numbers from 1 to 13. (Each person has 4 different numbers). In the next 24 columns are concatenations of these numbers in every order possible. On a separate sheet I have a list of concatenations of all possible combinations of numers 1 to 13 in groups of 4. e.g. 1234, 1235 etc. I have then counted how many times each of the concatnations from the first sheet appear. What I want to do is put the names of the people whoes concatentaions match the ones on the third sheet.
View 14 Replies
View Related
May 13, 2008
I have been browsing this site for some time but never posted. It looks like a great community and looking forward to learning!
I am trying to create an array in VB that searches an entire column (L) that has nothing but numbers in it. I want to search for all numbers that are >= 6. If the number is greater than six store the value in column A. At the end, I need to display a message box that has all the values in A that match the criteria where column L is greater than 6.
I have found all kinds of copy to other sheet formulas and static finds.
View 7 Replies
View Related
Jun 24, 2008
What I would like to do is have a macro check a column for any occurrence of a few different numbers, and then enter the text "n/a" in a different column of each row that one of the numbers doesn't appear in.
I have a list of part numbers that require a certain operation, and I'd like to mark off a cell for each item that does not require that operation. I've attached a simple spreadsheet that should help explain this better.
View 9 Replies
View Related
Feb 23, 2010
On the attached worksheet I am selecting items from the "Description" dropdown list on the Invoice worksheet. I then would like to find a way to automatically copy and paste the "Item #" and "Unit Price" found associated with the selected item on the database worksheet "Products".
i.e. I select the product and the spreadsheet fills in the rest of the required info.
View 5 Replies
View Related
Feb 27, 2014
I have a worksheet with a lot of different conditions applied to a lot of cells. I'd like to do some housekeeping, but to do that, I would like a clear and complete list of all cells that have conditional formats attached to them, and what the formula/criteria is for applying said format. I don't even care what the formatting is, but that would be nice too.
So, when I go to my "Conditional Formatting" screen, I get something like:
Now, this doesn't show me much of anything about what the formula actually is. I need to select it and look around. I'd rather just get a full listing of what the rule says...
And where I might have the same rule applied to different ranges of cells And so on.
View 2 Replies
View Related
Sep 6, 2006
I do a search on my directory for all *.xls files each month which produces a list some 11,000+ lines long. Attached is a very small sample.
I then import this into Excel – see tab Raw Data
What I want to produce is a list shown on tab Finished Data, so that I can then sort etc.
Has someone already done this before and got the code, or can someone point me in the right direction on how to arrive at the finished data?
View 9 Replies
View Related
Mar 21, 2014
A
B
c
d
[Code]....
So the data I put in Is Cells A to D the reast are calculated for me. so for example E2 is looking down column D to see if the number matches the number in A2, If any of them do it will put the name in the corresponding cell in E2 (Or you ca use a different cell if you prefer) so in this case D3=A2 so B3 is the answer also in the cell next to it I need whatever number is the cell next to the answer so in this case C3
View 3 Replies
View Related
Mar 27, 2014
I am using Excel 2010. I need to copy a list from any Column on the right to the existing Column. See the sample file.
View 10 Replies
View Related
Jul 23, 2013
I'm working with a dataset from a survey that has recently taken place. The original structure of certain questions in the survey were multiple choice. The ideal structure for these questions, in terms of variables, is that each possible option for the question (A,B,C,D... etc) have a separate value, with a 1 for yes (reported) and 0 for no (not reported). In other words, if Question1 has multiple possible answers (A,B,C...), then there should not be one variable created from this question, but rather, there should be a variable for each possible response: Question1_A, Question1_B, Question1_C, and so on. And within each of these variables, should be a 1 or 0 depending on if that option was reported or not.
The format I received the data in, though, was a single variable with a list of letters, (e.g. B,D,F) for each option reported.
Variable: Question1
Row 1 A, B, C
Row 2 B, E, F
Row 3 B, D, E
The data I have right now is housed in Excel prior to exporting to SPSS and/or STATA. I need to find a way to distribute these values into separate columns (variables). The tricky part, is that if I simply use "text to columns", it distributes the letters to new columns, but doesn't take into account that the first value reported might not be A. Is there a way to take the list of values in the single columns, and distribute them to assigned newly created columns?
View 6 Replies
View Related
Sep 17, 2013
In the attached workbook I have groups of numbers in Col G
In col H I would like to trim col G to just one each of the numbers where there are duplicates (as shown).
Each group of numbers will have a blank row between.
View 2 Replies
View Related
Mar 23, 2008
The list columns 5,7 and 9 has number entries.The userform has 3textboxes.is it possible to link total amount of this numbers result into the textboxes.Like column 5"CZ" entries total will showup in textbox10,column 9"DD" = textbox14
Private Sub TextBox2_Exit(ByVal Cancel As MSForms.ReturnBoolean)
Dim a, i As Long, ii As Long, b(), n As Long
ListBox6.Clear
With TextBox2
If .Text = "" Then Exit Sub
If WorksheetFunction.CountIf(Range("cv:cv"), .Text) = 0 Then
MsgBox "No Entry !"
TextBox2 = ("")
Exit Sub..........
View 9 Replies
View Related
May 26, 2006
i have a list of serial numbers in a column, say column a, for example, and i have corresponding data in columns to the right of this, say just column B for example- I also have a header on column B which counts the data in column b. (just a COUNTA, counting occurences of 'x' )
my issue is this: i need to limit the range of the COUNTA dynamically- by the number of serial numbers in column A. for example: if i have 10 serial numbers, i want my COUNTA range to be B1:B10 (excluding header) and... i need this to be a built-in formula, NOT a VBA macro. i need it to update automatically, as soon as another serial number is entered. i've tried using references to named ranges and all sorts of language tricks, and i cant seem to get it to work. (such as:
' =counta(b1:namedrange1)
i'm going to have to do the same thing with COUNTIF's, so if that is also easily explainable,
View 9 Replies
View Related
Sep 16, 2013
I'm trying to place a pivot table in an existing sheet in order to have a list of names next to a P&L. I've got several criteria to filter the names, but when I apply the filters to the pivot table, not all the people show up. The weird thing is that the total at the bottom of the pivot table, which is a simple sum of time in a given month per person, calculates the correct number as if all the employees are there.
When I do the same table in a fresh sheet, in the same file, it shows correctly. It's only when I try to put the table in an existing sheet that it abbreviates the list.
View 1 Replies
View Related
May 15, 2013
Let me see if I can explain my question in an understandable fashion....
I have a table containing data for about 2000 ID numbers. Some of these numbers are unique and some are duplicates. I would like to convert the ID numbers into a consecutive list of integers while preserving the unique numbers. For example, if the first column of my table is currently:
ID#
18578
19644
19644
20247
20974
21361
21361
21419
I would like to change that to something like:
ID#
1
2
2
3
4
5
5
6
I need to know which records (i.e. which rows of data) are from the same ID# but want to remove the actual ID#.
View 6 Replies
View Related
Jun 14, 2013
I have 2 lists and need replace the numbers in List 1 if they appear in List 2. If they do not match to list 2 then keep the number in List 1. I have attached a excel worksheet as an example. So cell B4 needs to be replaced by Amount in Cell F9. Also Cell B7 needs to be replaced by number in F5.
View 3 Replies
View Related
Oct 28, 2011
I'm looking for a way to get a unique list from a column to a data validation drop down list. Any fancy formula or vba script to create a UDF which. Does this?
View 5 Replies
View Related
Nov 26, 2007
1. I have a list of several items in sheet 1. Lets say 30-40 rows.
2. I do a frequently update of this list.
3. In sheet 2 I want to have a copy of this list in row 1 from column A to Column x (depends on how long the list in sheet 1 is.)
4. When I change the list in sheet 1, could be in first, middle or last row- mayby several rows. The list in sheet 2 should be updated
5. The update of sheet 2 should insert a new column on the right place, according to the list in sheet 1.
View 9 Replies
View Related
Feb 6, 2014
I am looking for a formula to search two columns.
1) The first column needs to be search to match a text string.
2) If the text string matchs, I need excel to evaluate the number in the second column and find the MIN value of all numbers associated with the text string.
So:
Joe 50
Jim 12
Joe 10
Rob 25
Jim 8
Rob 99
When searching for "Joe", the function would return 10. When searching for "Jim" the function would return 8. For "Rob", it would return "25".
View 4 Replies
View Related
Sep 30, 2009
I am trying to use a PRODUCT formula to return the product of a list of numbers in a column, between 2 specified dates. The spreadsheet is arranged as follows:
Column BA list of dates
Column C & DNumerical data not used in any calculations
Column EThe numbers to multiply together
Cell A1Start date to be used in the PRODUCTformula
Cell A2End date to be used in the PRODUCT formula
The formula I have to multiply the data in column E, subject to the start and end dates in Column A is:
{=PRODUCT(IF(B15:B1000>A1,IF(B15:B1000<=A2,INDEX(B15:E1000,0,4))))}
This returns zero though works appropriately if I replace “PRODUCT” with a “SUM”.
View 2 Replies
View Related
Aug 18, 2014
[URL] .... If you take a look at the picture, what I'm trying to do is add the list of Prices up so that I can differentiate the amount received in $ and in £.
I need to add up all the numbers that don't have a $ in front into the 1 cell, and all the ones with the $ in front into another cell.
FEdLkuj.jpg
View 2 Replies
View Related
Mar 15, 2014
Is there any script that I generate 6 numbers of these numbers from the list? so they do not recur after another example 7,12,13,19,26,33
View 2 Replies
View Related
Aug 30, 2007
I have to create lists of data in the following format:
123121321,12321215,121351213 (numbers with , with no spaces)
These numbers are sent to me in excel in columns and I need to convert the columns into rows using the format above.
The formula I have been given:
=INDIRECT(ADDRESS(((ROW()-1)*10)+2,1,1,TRUE,"SSOs")) & "," & INDIRECT(ADDRESS(((ROW()-1)*10)+3,1,1,TRUE,"SSOs")) & "," & INDIRECT(ADDRESS(((ROW()-1)*10)+4,1,1,TRUE,"SSOs")) & "," & INDIRECT(ADDRESS(((ROW()-1)*10)+5,1,1,TRUE,"SSOs")) & "," & INDIRECT(ADDRESS(((ROW()-1)*10)+6,1,1,TRUE,"SSOs")) & "," & INDIRECT(ADDRESS(((ROW()-1)*10)+7,1,1,TRUE,"SSOs")) & "," & INDIRECT(ADDRESS(((ROW()-1)*10)+8,1,1,TRUE,"SSOs")) & "," & INDIRECT(ADDRESS(((ROW()-1)*10)+9,1,1,TRUE,"SSOs")) & "," & INDIRECT(ADDRESS(((ROW()-1)*10)+10,1,1,TRUE,"SSOs")) & "," &
INDIRECT(ADDRESS(((ROW()-1)*10)+11,1,1,TRUE,"SSOs"))
currently I only get 10 numbers per row
I need at times for up to 500 numbers to be listed on a row. However even when I try to extend the formula it still only gives me 10 numbers per row and breaks up the 500 numbers to 10 per row.
Is there another way to combine up to 500 numbers in one row?
View 9 Replies
View Related
May 23, 2009
From a list of numbers I would like to delete values that have cents so only those transactions with a .00 amount are displayed
For example
34.95
21.88
21.00
56.00
45.77
Only those valaues ending in .00 will list. I tried filtering but I think there most be a function(s) string that might work or at least filter out the values with cents
View 4 Replies
View Related
Nov 14, 2008
I need to add all the values in column B for each specific day in Column A and display them in Column C. For example the sum of all values in Column B for Monday is 183 which is then displayed in Column C.....
View 9 Replies
View Related
