Is it posible and how to create a list of barcodes from a list of numbers on the worksheet?
Strokescribe seems to have some ind of solution but the data can't come from the worksheet.
I am struggling with trying to create a Top 10 list in Excel 2007. I have googled and search the forum but could not find a solution. (Aplogies if i have overlooked a thread)
I have attached an example of my problem.
1. In Column F i would like to extract the names of the Top 10 performers, based on their respective score. Hence, based on the scoring in Column D, Column F should extract the Top 10 performer names from column A.
2. In Column G, same as above, but bottom 10 names
3. From the attachment, you will view some names are highlighted. I.e. Gary & Neil, and Ian & Michael. These are highlighted based on the fact that they have equal scores.
When extracting the Top / Bottom 10 list, i would like to rank the performers with same score differently. e.g. Gary & Neil, both scored 0%, hence they are equal. But in the Top 10 list, i would like to rank Gary higher as his absolute target is higher. (63 vs. 27) . Same applies to Ian & Michael, Michael should rank higher in the Bottom 10 List as his absolute target is higher.
Using Excel 2007, I have a very simple spreadsheet made up of only two worksheets that I am using to track the songs played by a band during a current tour.
One worksheet is called "Summary" and the other is called "Setlists". In the Setlists worksheet I list every show played (10 shows so far), and every song played from each show. In the Summary worksheet I have very song listed that has been played during the tour in one column (A), then the number of times that song has been played in another column (B). Column B, the number of times each song has been played, is populated by a COUNTIF function that looks at the Setlists worksheet and counts each instance of each song.
What I want to do, very simply, is to sort on column B in order to display the list of songs from the most played to least played. That is where I run into a problem. When I sort my list of numbers, I end up with a seemingly random list that certainly isn't from most to least and I can't figure out why.
Is it possible that the COUNTIF function which populates that column of numbers is somehow throwing off the sort?
Is it possible to do a drop down list that allow user to select pre-defined selections but everytime when a selection is chosen, the list reduced?
Example,
I have can choose Apple, Orange, Durian and Mango.
The drop down can only select these 4 fruits.
So there are 4 cells in Column A1, A2, A3, A4.
A1 selects Mango and then A2 will only have 3 options to choose. So until the last cell, he can only choose the last fruit left.
A1, A2, A3, A4 are not selecting in descending order thus it could be A3 selecting first, then A2 and then A4.
I'm using excel 2007
Excel 2007 I have a spreadsheet of file boxes the keeps a log of boxes, contents, locations and shred dates. Currently figuring out when and which boxes can be shredded is a manual hunt, find, and then deal with it. I can use CF and Sorting but I have been looking at some search type functions to return a list meeting the requirements and trying to step my way towards that.
1st attempt. Was find out how many boxes meet the shred (before today) that have not already been detroyed. Column K is the Shred Date, D1 is Todays date, Column G is Status. Got this working good.
[QUOTE]]=SUMPRODUCT(--(Log!K2:K2136(lessthan)STATS!D1)*SIGN(LEN(Log!K2:K2136)))-(COUNTIF(Log!G2:G2136,"Destroyed"))[/QUOTE
My failed attempt came at trying to find the earliest shred date excluding those that have been destroyed. This is not really neeed but I was hoping it would get me closer to creating the list of boxes that meet shred that have not already been destroyed.
Note: Column A is the Box No. and the spreadsheet contains blanks as we continue to add file boxes to storage.
Below array formula find the highest box number used by each department.
Code:
=A4&"-"&TEXT(MAX(IF(Log!$A$2:$A$2136"",(LEFT(Log!$A$2:$A$2136,LEN(A4))=A4)*RIGHT(Log!$A$2:$A$2136,3))),"000")
I would like to create a list of boxes including Column A "Box no.", Column H "Location", Column K "Shred Date" for any box whose shred date is before today that has not aleady been labeled "Destroyed" in Column G.
I'm trying to create a staff rota which will populate a rota randomly when prompted - I have been trying to find some way of connecting the random lists and the staff names, though this has proved difficult (to say the least!). How best to proceed? I'm also fully aware of the possibility that my present design will also double book people (place then on reception and telephone duty simultaneously).
View 3 Replies View RelatedI have a combo-box in a Multipage control. Now I want to get the combo-box populated with list in 2 columns from 2 different consecutive columns from the same worksheet (Product List). Now, Once the list gets populated, user will be selecting his choice from the list, which is then needs to get copied to another worksheet (Order Placed). Both worksheets exist in the same or one spreadsheet.
I am trying to make it work with the following code. I am able to see 2 columns but with no data getting populated. I am working in MS Excel 2007.
[Code] .....
I have a List of Different Fruits in Cells A1 to A5
Apple
Banana
Orange
Strawberry
Cherry
And I use data validation list in 5 different cells from Cells C1 to C5 then in every cell the list will show all the fruits,
But I want that if I select Any Fruit in cell C1 that should not be included in the remaining 4 cells, and the fruits selected in Cells C1 and Cell C2 should not be included in the remaining 3 cells and so on....
I Used the formula
=IF(C1=A1,OFFSET(A2,,,COUNTA($A$2:$A$5),1),0)
But this works fine if I select Apple in the Cell C1, then the List of C2 Shows all Fruits other than Apple, But if in Cell C1 I select any fruit other than Apple it does not work... (Using Excel2007 & Win XP)
I'm using Excel 2010. I have a workbook that has six or seven worksheets in it. Each worksheet has a header row, and then lists of clients at the clinic where I work. The columns are last name, first name, medicaid #, social security #, DOB. We use these lists every month to verify that each client has Medicaid for the month. Therefore, there are also columns with names like April, May, June where we mark yes or no for each client. Some of the worksheets also have information about the clients' guardian, phone number, etc., but not every worksheet has those. (I can't show you the worksheets b/c of federal privacy laws, of course.)
I really, really want a worksheet that's a master list of the data from each of the existing worksheets, and I'd like to keep it synced to the source worksheets. I'd love it if I could also add a column telling me which of the source worksheets the data originally came from.
I've tried a few things to make it happen, but nothing has worked.
I've tried using the Consolidate function built into Excel as well, but that only works with numbers, not text, and it wants to manipulate the numbers instead of just copying them over.
I've found several macros online that should have worked (including one from this site) but that I wasn't able to install to my worksheet. I followed all the steps for installation, and throught it worked, but when I went back to the Excel file to run the macro, the list of available macros remained emptpy.
Is it possible that corporate IT has disabled the ability to install macros? Is there somewhere in Options were I need to go to turn Macros on?
Does excel 2013 have a fence way to sort a list of alpha numeric numbers and alphabetize in this order A - Z and then 0 - 9.
Ex) Apple, Greg, Rob, Sand, 123, 126, 1000, 2001
I am trying to figure out how to create a drop down list on one page of a workbook with the list of items for the drop down list located on a separate worksheet within the same workbook.
I have a workbook with one spreadsheet with a list of items on it (sheet1/ingredients) and the rest of the worksheets would have the drop down list of items from sheet1/ingredients.
I have been trying to use the validation method with no luck - I just can't seem to get the source path right.
If possible I would also like the drop down list of ingredients to be self updating - the ability to continue to add items to the list and show up in the drop down lists.
When the value in the drop down window is selected I would really like / need to have the data populated in the rows to the right of the drop down window.
While asking is there any sort of auto complete so that one can start typing in the box and the ingredients that start with those letters show up to select from? (Such as if type EVA or EVAP --- then all words starting with EVA or EVAP appear instead of the entire list?)
I need to create a macro that can produce a new workbook with the list of the most recent users of my company, so that we can print their membership cards.
From my company's admin I can export the complete list of users with their name, serial number and address. Every time we export this list, the file is saved as "userdata-dd-mm-yyyy.xls", and "dd-mm-yyyy" as today
However, I would like to create a macro that would
1) open the most recent "userdata-dd-mm-yyyy.xls" workbook in the folder,
2) compare the user numbers in this file with the most recent "card_order-dd-mm-yyyy.xls" and
3) produce a new "card_order-dd-mm-yyyy.xls" workbook with the list of all new users since the last "card_order-dd-mm-yyyy.xls" ("dd-mm-yyyy" as today), based on the highest number for user number (this is a continuous list)
Note, the "userdata-dd-mm-yyyy.xls" workbook has name, serial number, address, expiration date and user number as columns.... but the extracted info to "card_order-dd-mm-yyyy.xls" is just of the name, serial number and expiration date.
What is the easiest way of doing so and what code should I use for the macro?
I have seen it accomplished where all worksheet tabs are arranged in a drop down list, and was wondering how to make that happen.
View 6 Replies View RelatedI am getting a run time error 1004 during a copy-paste of a named range. I've read other posts and the help file and know it's related to defining an object, but I'm not clear on exactly what hasn't been defined.
Private Sub Worksheet_Activate()
Dim lCell As Range
Set lCell = Worksheets("Sheet1").Range("C65536").End(xlUp).Offset(1, 0) ' find first blank cell in the column
With Worksheets("Sheet1").Range("AllDates") 'filter duplicate dates
. AdvancedFilter Action:=xlFilterCopy, CopyToRange:=Range( _
"E7"), Unique:=True
End With
Worksheets("Sheet1").Range("Dates_Filtered").Copy Destination:=Worksheets("Sheet1").Range("lCell") ' fails on this line
Range("Dates_Filtered").Clear
End Sub
I am after some code to create a new worksheet called 'xxxx' in my workbook, and then list all the sheets within the workbook (excluding the newly created 'xxxx' sheet.)
View 4 Replies View Relatedi want to make a dropdown list from excel 2007. I try data validation then allow then list then source but i cannot make the sheet 2 as the source of my dropdown list in sheet 1. i uses excel 2007 and my OS is XP.
View 4 Replies View RelatedI am creating a form using Excel 2007/XP, and am trying to make it easy to use for both people who want to click and people who want to type. I have a series of list boxes in the form that make it easy for the clickers, but I want the typers to be able to tab into the box and make a selection. For example, if the choices are Apples, Pears, and Grapes, I would like a user to be able to tab into the box, hit P and tab to the next box and have Pear be selected.
View 2 Replies View RelatedI have cells containing large drop down lists (offering many possible entries). Is it possible to get excel to "jump" in the list or complete the entry automatically? If i start typing "aut", it should the drop down entry "automation". For your information, I just use Define Name and Data Validation to create the drop down list. Is it must be using VBA code or I just can use Define Name and Data Validation which has been I created?
View 5 Replies View RelatedI have a large table of results that looks like this...
Forename___Surname___Art___Maths___Science___English___Drama
Billy________Bob_____________B_______A________C_____________
Michael_____Micky_____A_____D_______B_________________C____
Shelly______Sholly_____A*____A________________A________B____
I am looking for a way to write this data in a list like this........
Billy__Bob__Maths___B
Billy__Bob__Science_A
Billy__Bob__English__C
Michael__Micky__Art__A
Michael__Micky__Maths__D
Michael__Micky__Science__B
Michael__Micky__Drama__C
Shelly__Sholly__Art__A*
Shelly__Sholly__Maths__A
Shelly__Sholly__English__A
Shelly__Sholly__Drama__B
Excel 2007
I want to link a table to a form. Only, I noticed that when setting the input range in the form I'm unable to use OFFSET OR a table name. How can I link the form to a list which is going to expand?
Attached is an example. Two sheets. One for the list. One for the form. The list will keep getting added to.
Unrelated-but perhaps useful - Is it possible to link one cell to a list in another sheet so a user can type in a word and it will offer autocomplete options in excel 2007 ?
linklistoform.xlsx
I am trying to create a dynamic sub-table on another sheet from a master list in excel 2007. Where the master list size can change and have this reflected in the sub-table. I cannot use pivot tables.
Example:
Master List (Locations):
London
Drummond
Kentville
Sub List (should look like this):
London #count
Drummond #count
Kentville #count
I am using the code below (Excel 2007) to delete and add back timesheets based on a list of names from the "Names" tab. In addition, I am making a "Table of Contents" with hyperlinks on a separate worksheet that will allow employees quick access to their timesheet without having to look at each tab. The code below works well if I want to delete and add back all the timesheet at one time but if we get a new employee in the middle of a pay period I have to use a single timesheet until the end of the pay period.
What I would like to know is, can the code below be modified so that when the code is run it reviews the list of names and only adds a new timesheet for that employee without deleting and adding back all the timesheets?
I have designed a pay voucher in excel 2007. In the Cell A5, I have a dropdown list (through data validation) of names. I want to scroll down the name and take a print of pay voucher. Let me, explain with an example. Cell A5 (having dropdown List of names)
JhonBillAdamMickNo name (balnk)No name (blank)No name (blank) I manually selected the Jhon and take the print of voucher. Now I want some codes which aquatically select the 'Bill' from dropdown list and take the print of voucher. Then it will select the 'Adam' from dropdown list and take the print of voucher . Then it will select the 'Mick' from dropdown list and take the print of voucher and so on till the last name of data validation list. Remember, I have some blanks in the end of drop down list. This macro should ignore those blanks.
I just tried installing a basic macro which reads from a shared file on the office server onto my colleagues computers. Works find on mine but doesn't work on theirs "Could not set the list property index". When I comment out the offending line, the form loads just fine but obviously without the listbox populated. The line is:
Code:
.popsLB.List = Application.WorksheetFunction.Transpose(camp_array)
All machines are running Office 2007.
i have many excel workbooks in a folder i want a macro that will get the names of all the files and make the file names so extracted as a hyperlink to open the files.
View 1 Replies View Relatedmake a list of all Excel Workbooks in specific folder(My Documents). And once clicked, it will open the file immediately.
View 10 Replies View RelatedI've searched the forum and believe this thread to be the closest to what im looking for, but its doesnt completely apply: matrix to list conversion. I have an attachment to support my questions (see attached). I have a matrix of words (strings) that contain repeating and non-repeating contents. The matrix also has spaces which are of no value. Essentially, the VBA needs to ' analyze' this matrix and create a consolidated frequency list (as shown in the file).
The matrices are HUGE and therefore some of the clumsy VBA i am using is turning out to be a bit inefficient. The file also contains formulas and such that I cannot use AutoFilter nor can I use Insert or Delete rows...so the VBA shouldnt use those either.
I have two worksheet. One worksheet is a form where in the Field Door No. should be a dropdown list. The list will be retrieve from worksheet Source. Now upon selecting a specific Door No. it should also autopopulate the respective Type, Brand, Serial No., and Type.
First thing i need to know is what should i do on Cell B1 worksheet Form for it to be a drop down list retrieving the Column A on worksheet Source.
Second, upon selecting for example ATC0009 on the drop-down, it should auto-populate like these
Door No. ATC0009
Type AT Crane
Brand A
Serial 43679
Type Crane
I am using excel 2007. I have multiple folder with multiple files inside like below
folder1
file1
file2
file2
folder2
file1
file2
file3
folder3
file1
file2
file3
i need output like
folder1 file1 file2 file3
folder2 file1 file2 file3
folder3 file1 file2 file3
I need to use a function like =filelist(a1) or =filelist("folder1") then it should list the files horizontally like above.
I am having trouble using formulas in a smart way in excel.Basically, I am trying to calculate percentile for a range. But since my data set is huge, I dont want to select the range in percentile formula manually. my data set includes buckets and would love to be able to search for that field and then calculate percentile on a range. is that possible?
example
see attached excel file -its a small data set, but there are more buckets in the volume column. Using Excel 2007