I have a spread sheet with tabs that are for each week of the year. Each tab shows the date on top and times (broken into 30 minute intervals) on the side; the inside has information like an event on the inside.
My goal is to keep that information there and to have a "master sheet" that holds all this information in a list format so I can filter out some information.
I have a workbook with five sheets. One sheet is the Master and then one sheet each for four organizations. Each organization will populate data for their own sheet and I want Excel to automatically populate the Master with the info from each individual sheet.
I tried using and modifying the vba from this post [URL]). My workbook varies from the original in that the first seven rows are header rows so the first cell to be edited in each sheet is A8, I have 38 columns instead of 10, and I am using Excel 2013 instead of Excel 2003.
I figured out that I needed to change the vba to look like this to start copying from the first cell (A8) and to populate the master:
This seems to work, but until the first cell (A8) is populated in the organizations' sheets, it messes up the prior row on the Master (Row 7).
I've also noticed that undo becomes unavailable when switching between sheets and also copy/cut & paste between sheets doesn't work so I can't correct the way the script messes up the format initially (this I presume is due to the Copy Destination in the vba?).
My excel database has a master sheet where all data is included. It consists of 8 columns with two rows of headers (1st row: Sheet title, 2nd row: Categories for the columns like, name, salary, emp. start date, Boro,emp. number...etc.
Master sheet aside, I have 12 other sheets in the same workbook (Feb-Jan), we run a fiscal year, not calender. The data that is included in the master sheet needs to copy over to the corresponding worksheet sheet month as long as the date in the emp. start date falls with the month range. For example, if my master sheet has data in rows 4,5,7,9,19,23,101...600 and the emp. start date is in the range of from June 1st, 20xx through June 31st, 20xx then all the data in that row should copy over to the next available row in the month of June's worksheet. The same should happen the months of Feb - Jan.
I have a workbook, 'MyWb.xls' and a sheet with buttons to which I attach some sheet macros. When I assign a macro to a button I pick the appropriate reference, e.g. Sheet2.MyMacro, and this gets recorded by default as MyWb.xls!Sheet2.MyMacro
When I create a new single sheet workbook with the instruction ActiveSheet.Copy, I end up with a new workbook, say 'Book2' along with the buttons as expected. However the macros attached to the buttons still refer to the MyWB.xls file and not the new 'Book2.xls'. As part of the process of creating the new book I've tried redefining the macro with the instruction
I work for a production hombuilder and I am developing a schedule to track community development. We have over 20 communities that we will need to use the sheet that I have devised to track progress. Is there a way that I can somehow create a link to an individual sheet within the workbook for easy navigation?
The alternative I believe would be to just have all of the communities on one sheet but have to scroll down a number of rows to display the timelines.
I am looking for some code that will take a workbook (that has multiple sheets in it), and for each sheet copy it's content over to a newly created sheet called MASTER. I also want to take the sheet name that is being copied from and place that in column A in the MASTER sheet.
View 8 Replies View RelatedI am trying to combine several workbooks containing data in multiple sheets into a master workbook. All the workbooks have the same number of worksheets. I would like to combine all data in Sheet1 into a new Sheet1, all data from Sheet2 into a new Sheet2, etc.
View 1 Replies View RelatedI have never really used VBA and so am completely stuck at this problem. I need to create a macro which auto-populates a master worksheet from the individual user sheets in a shared workbook. Sheet 1 is the master sheet "Team Stats". There will be an undetermined number of individual worksheets to accomodate new staff. Each worksheet will be identical, using columns A-I with row 1 having the headings:
Date, Name, Reference, Value, Price, Age, Purchased?, Destination, Add. Products (the last 3 columns will have a drop-down list which will be used to enter data into the cell). There will be a varying number of rows in each of the individual sheets. If possible I would like the macro to run every time data is entered into one of the individual worksheets. If this is not then it would be fien to update every time the workbook is opened.
I am trying to get specific data from several worksheets and put it into a master list. My biggest problem is the the primary sheets are constantly updated and would need to extract some data fromt the master list for these updates.
What I have now is working fine, but I have to duplicate some of the data whenever I add a new sheet.
Can this be done using formulas or do I have to learn some VBA or use of macros?
I have Sheet1 with point numbers in column A; X, Y, and Z coordinates in columns B, C, and D. Other sheets are the same format for different jobs! I would like to be able to have all points in the master list and accessable from all sheets when the jobs overlap and same data is requested.
I will be adding a weekly report to each sheet, which will have varying rows within it, but always the same column headers.
I want a master sheet that will automatically pull all the rows of data through from each sheet, create a new row if needed but merge rows with the same data name and combine the figures.
I have a work book that I am using to track volunteer hours. I often get new volunteers. Is there a code I can use to add a line item in each month from when I add a name to the master.
EX> of master sheet
A1 = Jimbo A2 = Jones
B1 = Mike B2 = Smith
C1 = Tommy C3 = Tickles
If I want to make on the master
B1 = Kyle B2 = Tanner
How do I automatically make the following sheets add Kyle Tanner in Row B Jan, Feb, March, April, May, June, July, Aug, Sept, Oct, Nov, Dec
I am running a macro to create a combined master summary sheet from data in several other sheets contained in one workbook. That is working fine. I need to create some kind of refresh macro so that when data in these sheets change the master sheet will change and update automatically.
View 9 Replies View RelatedI have a workbook with four worksheets. Sheet1 is the master. On sheet one there is information in a 10x10 table. The first column of the table contains a status of "No, Maybe, Yes." A record will start with a status of No and move to Maybe and then yes. What I want to do is be able to dynamically fill sheet2-sheet4 with information from the master. If the status is "Yes" move that row to sheet2. If the status is "no" move that row to sheet 3. Etc. Further complication that is depending on status, I want specific columns from the master, not necessarily all of them.
View 2 Replies View RelatedI have attached a workbook (excel 2003), I have few userforms in it.
I tried to copy data from all the tabs in the workbook to "Master" tab but getting an error.
You have to login to file details are as below:
I have multiple sheets all of which are identical except for the number of rows containing data. I have been trying to create a macro to update these sheets into one 'Master' sheet but I'm having great difficulties due to me needing to leave Column A and Row 1 blank.
I have uploaded example data of what I am after, sheets 2 - 6 need to be automatically updated to the 'Master' sheet when the macro is run.
I currently have an excel work book with multiple sheets per year. What I want to happen is that whenever I input data in one of the Year sheets, it will automatically go to the Master sheet.
See attached file for sample
Sample.xlsx
I have a database with all employees in a worksheet. Employees are from eight different divisions (marked with acronym in column C). I have eight additional worksheets - one for each division (names of worksheets will be the same to the entries in column C in master sheet).
I want the information of employees (the whole row) to be transfered to the sheet of their respective division. So, whenever I make a change in the master sheet, the change is effective in division's sheet as well. And if I add an employee to the master sheet, they will be automatically added to the division's sheet.
the code below was created by: JoeMo I'm trying to adapt, but I need to say which worksheet you were to NOT be copied
Code:
Sub MergeSheets()'Author: JoeMo
'http://www.mrexcel.com/forum/excel-questions/683803-copying-data-multiple-sheets-appending-master-sheet-reverse.html
[Code].....
I have multiple data sheets with tables and I want to create a master sheet table that automaticly will update when now rows/data is added in to the sheets in any of the data sheets.
Master sheet will look like this (the first 3 letters is the data sheet name), this is just the first column there a a lot more columns to be added
AAB08
AAB09
AAB10
AAB11
AAB12
[Code] .......
So when let's say in sheet AAB I add another row AAD13 I want the master sheet to update automaticly so it looks like this
AAB08
AAB09
AAB10
AAB11
AAB12
[Code] ......
Is this possible?
[data] ....
With the above data, I'd like put all of the data for each respective dept on it's own sheet. Obviously I have many rows of data and departments so manually would be almost impossible.
For Each Ws In Sheets(Array("SHEET101", "SHEET102", "SHEET103", "SHEET104", "SHEET105", "SHEET106", "SHEET107", "SHEET108"))
With Ws
Finalrow = .Range("A65536").End(xlUp).Row
Set CpyRng = .Range("A2", .Cells(Finalrow, "AR"))
If Finalrow > 1 Then
CpyRng.Copy Sheets("Master").Cells(Rows.Count, "A").End(xlUp)(2)
End If
End With
Next Ws
Basically what it does is simply combine all the records in the the mentioned sheets to the master sheet.
There is a little problem. When one of the sheets are on a filtered mode, the data copied in the "Master" sheet are only visible cells.
Un-filtering before copying is an option (i.e. putting the code ".ShowAllData") IF I can put the exact filtering back after copying. Reason being that the sheets are owned by other parties and they do not want their own filtering be removed.
I have multiple sheets on which users enter data in Cells B3 to B21 on each sheet.
I have a master sheet where the information entered on individual sheets is copied by links. On the master sheet the information is displayed in Rows. Thus data on Sheet1 B5:B25 is displayed in Row 6 cells H6:Z6 of Master Sheet, data on Sheet2 is displayed in Row 7 cells H7:Z7 etc. The formula in H6 of the Master Sheet is =Sheet1!B5, in H7 it is =Sheet2!B5 etc. It is of course not possible to use Autofill to copy formulas across on the Master sheet. It can be done manually but there are hundreds of cells to fill.
Is there an elegant way to copy the formulae on individual sheets onto the Master Sheet.
I want to be able to repeat the procedure later if additional sheets need to be added.
I have multiple sheets (lets say for example a 100 of them) where I need to copy a Value from a fixed location (Col#,Row#) from each of the 100 sheets and store it in a column in a Master sheet.. in the end the Master sheet has only two columns.. first column A contains file name (of the sheet where I copied).. then adjacent column B has the copied value.. in other words the Master sheet will have 100 rows and two columns..for this example..
View 2 Replies View RelatedI have been trying to make a code that copies all the data in A2:K50 in all the sheets (about 32 of them right now) and paste that information in 1 sheet (Master List). The code does work but for some sheets it only copies the first 2 or 3 records. Also, this code puts the name of the sheet the data came from but for the first 2 records in puts in the Master List its pasting the wrong Sheet name.
Sub SummurizeSheets()
Dim ws As Worksheet
Dim lastRng As Range
Application.ScreenUpdating = False
Sheets("Master List").Activate
So, I'm setting up an accounting book. There's a master sheet that needs to pull from the other sheets that are made. The problem is, with each new sheet that is made, I have to update the formulas on the master. I would like that if I made a new sheet, the master would automatically pull from it.
Example:
Master pulls renter fee info from May 3rd, May 7th
I create sheet (May 15th)
Master pulls renter info from May 3rd, May 7th, May 15th
I found the code below and it works perfectly if I want to copy all the other sheets to a master sheet. But, I need to specify specific sheets. Basically I have a workbook consisting of multiple sheets and multiple "master" sheets so I need to specify in the code which sheets it should be copying.
[Code] ........
i want the compile all information from few sheet (20) with same format on daily basis based on due and CF status cash flow. the format as below as the result will same as original format,
No.
Receive Date
PRF No.
Frank No
[Code].....
I have an excel file with 9 sheets and I want to copy all the data from those sheets to a master sheet but with out the formulas . I need the values only to appear in the master sheet. I used the following vba macro code which I found it while I was searching for an answer, it did it perfectly except for the formula part. !! I guess, it has to be edited by adding some codes with paste options but I don't know how!
Code:
' CollectMasterData Macro
'
Sub CopyToMaster()
Dim wkSht As Worksheet
Dim DestSht As Worksheet
Dim DestRow As Long
Set DestSht = Sheets("MasterData")
[code].....
Note: my headers are @ row 1 and 2 and my formula is in column A.
Copying data from multiple worksheets, but my problem is quite the reverse.
I have data for each month as a worksheet from 1970-2012. They are in a workbook with the recent years at first and the oldest years at the end/..
Like 2012Dec,2012Nov...............1970Feb,1970Jan
I would like to know how to write a macro to copy a range of data from Jan 1970 then add data from Feb 1970 and so on until Dec 2012.. The range remains the same throughout all the sheets.
I was able to do a rough code, but I am stuck doing the reverse part...
Code:
Sub ReverseList()
Dim Sht As Worksheet
For Each Sht In ActiveWorkbook.Worksheets
If Sht.Name "MEGA" Then
Sht.Select
Range("A:A").Insert
[Code] ..........
Also is it possible to restrict the range selection in each sheet based on the month and year?? For Ex. Accounting for leap year and 30 day months...
I need to create a macro to copy the data from time sheets of different employees into the Master sheet. ie., each employee's time sheet details in to a separate sheet. If any employee fails to provide his/her time sheet details. a mail must be sent to the respective employees regarding the Time sheet submission. I am providing the sample data of my files too.
Intentionally TS_Employee5.xlsx timesheet isn't provided. In which case, I have to send a mail to the respective employee, in order to remind him about the time sheet.