Match 2 Columns To Copy Information In Other Columns
Apr 21, 2007
I have 2 workbooks (workbook1 & workbook2). Information in column A and column N must match both workbooks per row/ cell (ie. if A2 and N2 in workbook1 match workbook2, copy information from 3 other columns (S, T, U from from workbook1 into workbook2 - cells S2, T2, U2). Workbook2 may have information in column S, T, U, but I need to over-write it with the information from workbook1. If the information does not match per that row/cell (ie. A2 in both worksheets are the same, but N2, they are not, so go to the next line that does match and copy the information into worksheet2). I do not want to use a V- lookup for this problem. I really need a marco.
I have 2 worksheets in which I have to copy one column of cells from one to the other. The problem is that the "main" worksheet lists nearly 3,500 clients and I have to copy numbers into the "main" worksheet on weekly basis from another worksheet that lists only about 1,100 of those 3,500 clients.
Both client lists are in alphabetical order, but I obviously cannot just copy one column into the other, because then the numbers won't be matching the correct clients.
I need to compare names in column A(sheet 1) to names in column A(sheet2) and if there is a match then I need the date from column B(sheet 2) to be copied to column B(sheet1).
Trying to compare data from two spread sheets, if there is similar data in column a, output all data (sheet1 & 2) to the 3rd sheet.
Sheet1 a b c d smith john 888 cicero king larry 123 syracuse
Sheet2 a b c d smith marge 777 liverpool king mike 458 dewitt
Sheet3 a b c d a b c d smith john 888 cicero smith marge 777 liverpool king larry 123 syracuse king mike 458 dewitt
The closest thing I can find to what I'm trying to accomplish is this link here: Compare Worksheets
I'm also would like the ability to change the columns I am comparing. The actual sheets may have more that 4 columns.I can somewhat read the formulas but have a hard time under standing them completely.
I would like to match column data in a source spreadsheet to column data in a target sheet. If a match is found, I would like to copy the corresponding row range from the source sheet to a separate, third sheet. For values where no match in found in the a target sheet, I would color the unmatched cell in the target sheet red. If a match was found, the cells would be colored green. The data in the Source sheet is in column A, while the Data in the Target sheet is in Column T. The data will be pased in the third sheet in Column T preserving original formats
I have this code, gleaned from several postings on this forum that somewhat works. The problem is that I get false mismatches (i.e. some cells get colored red even when there is a match and the data got copied to the third sheet) even though there are no duplicates. I have made sure that the formats are identical in both Target and Source sheets to try to fix this. Also, I don't want to cut the entire row , but just copy and paste a row range onto a third sheet. The column and row ranges are variable. I am attaching a file.!!
Sub CutRows() Dim i As Long, k As Long, n As Variant, r As Range Application. ScreenUpdating = False With Sheets("Source") Set r = Range(.Cells(1, 9), .Cells(65536, 6).End(xlUp)) End With k = 0 i = 6 While Not IsEmpty(Sheets("Target").Cells(i, 20)) n = Application.Match(Sheets("Target").Cells(i, 20).Value, r, 0) If IsNumeric(n) Then Sheets("Target").Cells(i, 20).Interior.ColorIndex = 35 k = k + 1 Sheets("Source").Rows(n).Cut Sheets("Sheet3").Rows(k) Else Sheets("Target").Cells(i, 20).Interior.ColorIndex = 3 End If i = i + 1 Wend Application.CutCopyMode = False Application.ScreenUpdating = True End Sub
Been a while since I've worked with macros within excel and I can't seem to get what I remember being a basic macro to work whatsoever. I have 2 worksheets containing a massive amount of data and need to pull some cells from one into the other when values in 2 columns match.
To better explain, sheet1 has ID numbers in column G spanning for roughly 1700 rows. Sheet 2 has corresponding ID numbers in column EO. The data I need to copy over is in columns EP and EQ on sheet 2.
So I'm trying to build a macro to compare the values in Sheet1_Column_G to those on Sheet2_Column_EO and when a match is found, copy the value in EO and the adjacent entries in columns EP & EQ over into columns X, Y, and Z on sheet 1.
Couldn't get a VB function together to save my life so I tried working with MATCH & INDEX and didn't get very far either. I've included my current function below.
I have two columns one is web addresses and the other is email addresses but the rows do not line up. I was hoping that since the second half of the email address matches the web address I could somehow sort them so that the email address column and web address column match up. Here is an example but keep in mind that this list is about 9k long and this is just a sampling so you may not see any in this example that match. Also I may have more than one email address per website.
Now i have one excel sheet with two separet sheets in it ( Sheet 1 ) and ( Sheet 2 ) . I have in sheet 1 a column A with material codes and ColB is discreption and Col C IS Prices . But in Sheet 2 Col D is materila Code and Col I is a price .
the recordes in sheet 1 are around 11000 but in sheet 2 are around 2200 where the sheet 2 has a specific materials from sheet 1 .
Now i want to update the prices in sheet 2 from sheet 1 for each item after confirm that the materila code in sheet 2 equal in sheet 1 so copy the price from sheet 1 to sheet 2
Sheet 2 is old prices and sheet 1 has new prices so i need update the new prices in sheet 2
I am trying to do a (what I thought was a) simple lookup involving 2 columns. Pls see attached example. I am trying to find the "?" values, by matching column A&B of the input to the Data columns and returning the $$$ column.
I thought this wouldve been a piece of cake but its got me stumped!
when i copy columns resulted from another columns operations and paste in new sheet i got garbage ,could you tell me why and how to overcome this problem.
The key point is that I have over 400 columns grouped in three, offset by one row down for each (this is due to a different formula I have working). Each column is 60 numbers long (not including empty cells above data). I want to copy all of these columns into a single set of three columns on another sheet (Sheet2). (These will be the fifth, sixth, and seventh columns, E, F, and G. If it would be simpler, I could simply copy the third of each set of columns on Sheet1 (C, F, I) to column G of Sheet2. Then there would be a total of 144 columns being copied (60 numbers per column).) All of this copying has to be values-only as the original columns consist of formulas referencing outside cells. Sheet2 should look like this:.............
I am unsure if this was answered already but I am having a lot of trouble. I am trying to find out if it is possible to count the number of entries in one column if it meets criteria in another comlumn?
Here is my problem: I work for a contractor and I am trying to find out the number of contracts sold(column J) by Mike (Column K). I have tried =COUNTIFS functions but these dont work. I know if I create 4 other columns with IF functions I can get the information but I have to imagine there is another way.
I have two very long columns of client names. The columns represent reports that were run at different times on the same information.
What I want to do is merge the two clomuns. The issue is that there are many names that are the same but some that are different. Is there a way that you can merge the info. So it ignores the client names that are the same but auto adds the ones that are new. There are financials in other columns that I want to have come along during the merger.
I have the following code below, im not sure how to modify it to make it only search 2 columns of information, how can do this?
Private Sub CommandButton3_Click() Dim StrFindWhat As Range Dim NextCell As Range Dim WhatToFind As Variant
WhatToFind = Application.InputBox("Please enter the Application or Service you want to search for?", "Search", , 500, 80, , , 2) If WhatToFind "" And Not WhatToFind = False Then For Each oSheet In ActiveWorkbook.Worksheets oSheet.Activate oSheet.[b4].Activate.....................
What im trying to do is match columns A & B from AUDIT Sheet to Columns A & B in MASTER sheet. If they match then pull columns C, D & E from MASTER into AUDIT.
I have a list of 2500 companies. In each cell there is the company name, street address, and phone number. And of course, each one is of varying length. I need a way to put the company name, street address, and phone numbers in seperate columns. I tried going to text to columns but it wouldn't work due to the varying lengths.
I have a list of names with blank cells in Column A cell 2.
I want the programme to scroll through this column until it finds a name, when it does I want it to look in cell offset(1, 1), in this case B3 to see if there is a number. I want this number to be moved to offset (0, 1) AND any subsequent numbers below it until the next blank cell in that column (B).
In the attached image cell B2 will contain all numbers in cells B3:B9 with a / between them. Cell B10 will have number from B11 and B12 will have B13:B15. If there is no number it will just continue to the next name in column A. My rough code below delivered the first number only in the relevant cell and I'm not clever enough to get it right. It does not have to be super slick as it's for one time use.
I need numbers in column B cleared as they are concatenated into the single cell.
I have worksheet A with cell AC2 to enter a team id# like 51922 for example. In Cell B3 I want it search sheet11 for the team name according to the number and put the team name in B3. Sheet11 has 11 columns the first one list the 613 team names, the remaining columns have #'s like the example giving for the teams. What formula would I need to perform this function?
This is a football game the other 10 columns represents 10 worlds with identical 613 teams to control in each world, but the teams have different #'s to identify the world, team, and coach.
I have a spreadsheet that contains overtime information for employees. Basically, it has a list of names in column A, and a list of projects in the first row, similar to this:
Name 100323 100887 100987 100987 Sum
[Code]....
At the top of the page I've inserted a section similar to this:
Name Project Number # Of Hours
SMITH, John 100883 5
Where the name and project number are drop down data validation lists containing all of the project numbers and employees at our facility, and the # of hours section is just a manual entry.
I require a macro that, upon clicking a button, will verify that the name is in the list and insert a row if there isn't as well as verify the project is in the row and insert a column it isn't.. then it will add the number of hours i specified in the box. It would also be nice if the list of names would sort alphabetically and the project numbers would sort numerically from left to right after any additions. As well as clear the selections and # of hours I entered in the second table shown above once everything has been entered in to the main (first) table.
I'm pretty new to creating my own macros (even though im an engineer.. )
I am having a problem filtering information within mulitple columns. I do not understand how the advanced search works either, so let me try to explain what is going on. I would post a pic of the table to make it easier to understand if I knew how to.I have thousands of rows in Column A with information, for this scenario a number. Thing is that all these numbers are seperated by many blank rows.
Ex: Row 1 has a number, Rows 2-10 are blank, Row 11 has a number, Rows 12-24 are blank, etc. Over in Column C, for every row that has a number in Column A, there is a corresponding number in Column C followed by Rows of numbers. ex: Row 1 Column A has corresponding information in Rows 1-10 of Column C.If this is clear, understand that this repeats for tens of thousands of lines. When I am looking for a specific number in Column A, I do a filter for just that number.
When that happens, it only brings up the info from that same row in Column C. I need the filter to bring up all ten rows of info in Column C that correlate to the row I filtered in Column A. I know the easiest way is to label all the rows in column A with the same number, but the reason the blanks are in place is so it is easier to read the breaks between the different information.
I have data that I copy from one sheet and move it to another. If I know I'm parsing data that may vary in amount of line items but will always be across 3 columns is there a way to parse this data evenly.
for example: I would like to look in column "D" and if there is an "A" I would like to parse cells A,B,C in that row to sheet 2 and parse this information evenly across 3 columns evenly across columns "A,E, I" In my example the data is only 21 rows of information the problem I have is evenly parsing this information.
I am trying to sort/filter the information by columns but I need the information in each row to stay together for instance...
1 2 3 4 5 2 3 4 5 1 3 4 5 1 2 4 5 1 2 3 5 1 2 3 4
I need to sort the numbers in column 3 in ascending order or filter them but i need the entire row to move when sorted so it needs to look like this
4 5 1 2 3 5 1 2 3 4 1 2 3 4 5 2 3 4 5 1 3 4 5 1 2
I am using the list function to sort and filter the data in the columns but when i try to sort them in ascending order i get....
1 2 1 4 5 2 3 2 5 1 3 4 3 1 2 4 5 4 2 3 5 1 5 3 4
I don't know how to write formulas or VBA's or anything but am willing to try.
Is it possible to sort the data and get a result like the second set of data? and is there an easy way to make this fool proof so people that use the spreadsheet will not mess up the data?
I have a 5 row list in WA2. Each row holds its data across 3 columns i.e A1description, B1 product code, C1 unit cost. In WA1 I want to have a drop down table in cell B3 that looks at this range and then populates this information into B3, C3 and C4. I have tried data validation but it keeps telling me that it can only look at a single row or single column
Is it possible to automatically have columns repeat through all sheets in a workbook? I keep an annual book, broken down by sheets for each month. I always have to add 5 columns to each sheet, and was wondering if there was an easier way..?
I have a feeling the answer to this will be 'no' based on the searching I've done, but is it possible to allow formatting of rows/columns on a protected worksheet, yet prevent the user from unhiding some rows/columns I don't want them to see? I've allowed them to format rows/columns so they can "size" them to fit the text they enter, but that has opened up the ability for them to unhide columns. Using Shrink To Fit would be cumbersome due to the number of cells involved.
Is it possible to take the information below and make one list out of columns F, H and J based on the common information in column C? For example, group all the 18s in a list, followed by the 44s.this is excel 2007
