Matching Combination Of Two Cells With A Table And Return Value
May 8, 2014As shown in the attachment, I'm trying to return value when matching cell B7 + D5 with cell G5:I7. Is there any way to do so?
Attached File: File Type: xlsx Book1.xlsx
ADVERTISEMENT
Return ALL Matching Data From Table
Aug 13, 2008I'm trying to create a function in VBA,
I have a table of data and need to create a function which requires value (string), range and column number. This will then look for the value within the range and return the data for every match of specified value within the table.
I'm happy for the return value to be in the form:
val1;val2;val3;val4;...;val[n]
Pivot Table Chaos: Blank Cells Return 0, Empty Cells Return Nothing
Jun 25, 2009Hi, I desperately need help with a pivot-table and can't find anyone else who's ever had this problem...I have a very large healthcare data table which for simplicity I will describe as follows. In essence the first two columns respectively are (A) location and (B) month. Let's say the third column (C) is the number of cases of the disease kidpox treated in each health centre during that month. The fourth column (D) is the total number of cases of everything treated during that month in each clinic. The fifth column (E) is the proportion of cases of this disease over all consultations for each health centre and month, and the formula in E2 is .....
View 9 Replies View RelatedFrom Matching Numbers In One Column Return Value Of Second Cells In Another Cell?
May 19, 2014I have a table with 4 columns where in column 3 I have part numbers and in column 4 I have the number sold. In column 3, the part sold can be listed several times with a different number sold in the column 3. What I need is code to go through the part numbers and return a total number sold for that part in a new column. I have sorted the table by part number, then by Column 1 which is for the date. The new total should go in the last column with the oldest date for that part.
View 2 Replies View RelatedFind Cells Matching Value & Return Adjacent Details
Feb 21, 2008On Pipe worksheet, pipe numbers 1-203 are listed in column A. Each pipe number has a flow rate that is listed in column E. I need it to look up the pipe number in column A on the Job worksheet and report the flow rate (from the Pipe worksheet) in column D for each pipe.
View 5 Replies View RelatedReturn A Value From A Table Based On Several Other Cells
Mar 26, 2014So I've been trying to set up a table.
The table is made of 4 columns, with several times the same values. Each column has a specific range of value. No possible combination can exist twice. Meaning I won't have two rows that are identical. It looks like :
A1@X
A1@Y
A1&X
A2&X
B3#K
B3#O
B3£K
B4£K
C5$P
C5$M
C5*P
C6*P
The user tells me the value he wants in the 3 first columns, and I want to tell him what's in the 4th one.
Check A Combination Of Two Cells
Aug 18, 2009I would like to check a combination of two cells, if these two cells are both empty (not zero, just blank) then it will return a blank in another cell. I tried using AND but am unsure how it works. I would like to use a "Case" Function.
Function FirstCheck(Count1, Count2)
Select Case FirstCheck
Case Count1 = "", Count2 = ""
FirstCheck = ""
Case Else
FirstCheck = Abs((Count1 - Count2) / (Count1 + Count2))
End Select
End Function
Formula Value Based On Combination Of Two Other Cells?
Mar 10, 2014Modifying my formula to work. I'm trying to have the value of Cell B2 based off the combination value of two other cells.
[Code].....
Projected Date Formula From A Combination Of A 2 Cells
Aug 3, 2009I am trying to make the "Next Phase up DATE" cell automatically configure accorfing to the Issue date and the PHASE 1, PHASE 2, PHASE 3 Selection.
Phase 1 last for 14 days
Phase 2 last for 21 days
Phase 3 has no phase up date
So if I put 1 July 09 in Issued Date cell and select Phase 1, the "Next phase up date will be 15 July 2009. If 1 July 09 in Issued Date cell and select Phase 2, the "Next Phase up date will be 22 jul 09. If 1 July 09 in Issued Date cell and select Phase 3, the "Next Phase up date cell will be (N/A or something to that nature.) The Doortag portions are refrenced to the upper portions, so I only need the formula for (merged)CDE10 & (merged)CDE32
Find Number Combination In A Group Of Cells
Oct 28, 2011I'm looking for another excel game changer (for the work I do anyway).
I have a dollar amount, and I want to know if any combination of dollar amounts in a particular range of cells will equal that dollar amount. Is this possible in Excel?
Example: I have 20 different dollar amounts in a column. I want to know what combination of those 20 different dollar amounts, if any, will equal $257.97. The dollar amount I'm looking for and the numbers in the range will change with each use. I'm hoping for a formula, but VBA will work too as I could just make a template and copy / paste the numbers in.
Sumif Criteria Based On Combination Of 2 Cells
Sep 19, 2012I have different products with different sizes becoming operational in various months & years. I need to sum those sizes that are operational in a given month/year. In the example below, I have
-product A with 100 unit size, operative since 2007/03
-product C with 200 unit size, operative since 2007/10
So in the table with months on left, and years on top,
from 2007/01 to 2007/02, value must be 0,
from 2007/03 to 2007/09, value must be 100,
from 2007/10 to 2008/06, value must be 100+200=300 and so on.
For this specific example, I tried the following:
Code:
E2 = D2&TEXT(C2,"00")
fill to E7
B11 = sumif(E2:E7,"
Matching Two Columns To Return One Value
Mar 7, 2014Alright, so I need data in column A(Last names) and data in column B(First name) to match their respective names on another sheet. When a match is made, it will return column C(Hours worked).
I originally used Vlookup to match last names, something akin to =VLOOKUP(A:A,Week1!A:P,4,FALSE)
But this does not account for employees that may have the same last names. Is there a way to combine two vlookup's? Or is Index a possible solution?
Lookup And Return Matching Value
Jul 24, 2009In column "AT" I have a list of matchups between 2 soccer teams that looks like this
Row 1:Manchester UnitedArsenal
Row 2:Chelsea FCLiverpool
Row 3:TottenhamAston Villa
Row 4:Hull CityLiverpool
Row 5:Everton FCSunderland
Row 6:Bolton WanderersManchester United
Row 7:PortsmouthTottenham
Row 8:Birmingham CityStoke City
Row 9:WiganBlackburn Rovers
Row 10:LiverpoolFulham
In columns "AM" and "AN" I have a rating for the home and away team. So for example, AM row 3 would show the rating of Tottenham and AN row 3 would show the rating of Aston Villa.
Now what I want to do is set things up so that I don't have to enter every teams' rating in manually. I need a formula that would look from bottom to top (row 10 to 1), find the first row that contains Tottenham (for example), and then look to the right to either column AM or AN (depanding on if Tottenham is the first team in the matchup or second) and return the value in that cell.
Return Value After Matching Two Variables
Dec 10, 2006I am attaching a sheet wherein I have tried to match two variables and to return the appropriate value. But I find the formula returns the value which one cell below the correct answer.
View 6 Replies View RelatedReturn Matching Name To ID In TextBox
Apr 7, 2008I have a userform with several textboxes. I am trying to get one of the textboxes to auto populate based on the entry in another textbox. example: I want to enter a customer ID in one box and then the customer name to automatically appear in another box. The customer ID and names are stored in another workbook.
View 6 Replies View RelatedReturn All Matching Occurences
Apr 15, 2008I'd like to evaluate a series of columns where a value greater than 1 would return all matches in another worksheet. I can't seem to use LOOKUP or Pivot Tables effectively to do this.
For example
Task Week1 Week2 Week3
task1 5 8
task2 6 10
task3 5
I'd like to create a view that would show Week1 having one task (task1) that will take 5 (hours). Week2 should show task1 and task2, Week3 should show task2 and task3
MID FIND LEN (return The Matching Word In V6)
Oct 2, 2008=MID(M11,FIND($V$6,M11),LEN($V$6))
I use the formula above to return the the matching word in v6, from text within m11. If theres is no match it returns #value. is it possible when theres no match to return "Not Match" in the cell instead
Matching Data In 2 Columns To Return 1.
Feb 19, 2008I'm working on a excel sheet to compare data of 2 columns. One column (or array), let's say C3:C13 contains "x" in some of its cells. The other column, let's say P3:P13, contains "d" in some of its cell. What I would like to do is compare the cells of the same row, see if they contain any data and return 1.
So if C3 contains an "x" and P3 contains a "d", therefore it returns 1. If C4 doesn't have an "x" and P4 has a "d", it will return a 0.
The closest I can get to this is the following formula
=SUM(IF(AND(C3="x",P3="d"),1,0), IF(AND(C4="x",P4="d"),1,0), IF(AND(C5="x",P5="d"),1,0), IF(AND(C6="x",P6="d"),1,0)), IF(AND(C7="x",P7="d"),1,0)), IF(AND(C8="x",P9="d"),1,0)), IF(AND(C6="x",P6="d"),1,0))...
However, this formula is way too long. Is there another way of writting or simplifying this formula?
Return Value In Third Column If Values In First Two Columns Matching?
Mar 20, 2014I have a two different workbooks book 1 and book 2 with some data.
If values of first two columns ( Column A and B) of both workbooks are matching then I want a formula that can return the value of third column (column c) of book 2 in book 1 column c.
example:
Book 1
column A / Column B / Column C
100 / 200 /
Book 2
Column A / Column B / Column C
100 / 200 / 300
now I want a formula that can return in column C of book 1 to display 300.
And the data runs across some 100 rows in both workbooks.
Compare Columns In Worksheet And Return Row Value For Matching ID
Jul 17, 2013I have used the merge facility to incoporate all the worksheets into one excel files. As they all have same heading, I have sorted the data, first by their account expiry time (oldest to newest) and then by manager (A-Z)
For example, system report generated on 15/03/2013, 28/03/2013, 03/04/2013, 15/05/2013, 28/05/2013 and so on and these are sheet names too. What I want is one worksheet called report with the same heading as my merged worksheets and return values where Column C in 28/03/2013 is compared to 15/03/2013 and if the employee ID matches than return the whole row of data for the report.
the next query would then be for finding employee ID in 03/04/2013 and comparing it with 28/03/2013 worksheet and returning the matched ID in report worksheet.
This is the layout of the report worksheet.
Display NameEmployee IDAccount StatusE-mailDepartmentManagerComment
15/03/2013 to 28/03/2013
28/03/2013 to 03/04/2013
03/04/2013 to 15/05/2013
15/05/2013 to 28/05/2013
so for the above report worksheet, if employee id matches the two compared worksheet (15/03/2013 to 28/03/2013) return all value (Display name, employee id, account status, email, department, manager, comment) from the 28/03/2013 and so on.
Loop Through Rows And Return Matching Columns
Jan 9, 2009I have a worksheet with 2 columns. The first column contains names and the second column contains numbers associated with the name.
How can I specify a name, go through the sheet to find all the occurances of that name and then paste all the numbers associated with that name in another worksheet in a set position.
Return A Value Of Two Matching Cell Values From Another Sheet
Jan 7, 2010I have two sheets - one work sheet and the second - database with existing entries. Going by visual example below, I need the column C of the work sheet to automatically populate with the data pulled from the database sheet. For example, C4 on the Work sheet should find both values "Bike" and "Green" in one row on Database sheet and return the corresponding value 44444 from F97. The work sheet cells in the row C should remain empty if no match found on the database sheet.
Sheet 1 (Work sheet)
-------A--------B---------C
1---Auto-----Red
2---Auto----Green
3---Bike-----Red
4---Bike----Green
5---Bike-----Blue
Sheet 2 (Database)
-------A--------B---------F
12---Auto---Red----11111
37---Auto--Green---22222
85---Bike----Red----33333
97---Bike---Green--44444
102--Bike---Blue----55555
Excel 2010 :: VLookup To Return 2nd Matching Value
Mar 10, 2012Is is possible to construct a vlookup to identify that there are duplicate values in the Lookup_value and the Table_array and return the second and third values in the Formula result?
In the acutal project the Lookup_values and Table_arrays are in separate worksheets, but I think the example below represents the issue I'm working with.
I'm using Excel 2010
ABCDEFG1=SUM(IF($A$2:$A$8=A2,1,0))=VLOOKUP(F2,$A$2:$B$8,2,FALSE)
2JOHN13BILL12BILL11BOB14MARY11FRED15JOHN23JOHN16FRED11JOHN17BOB11JOHN18JOHN33MARY1
Lookup/Return Non-Matching Data In Worksheets
Sep 14, 2006I'm trying to compare 3 different worksheet in the same workbook and copying the unmatched values into a new worksheet. find the attached file. In the sample file, am comparing sheet1, sheet2 and sheet 3 with sheet1 as the base. the columns mite differ in their location but the column headers are same.. The difference, bolded cell, should be copied along with the header and the code, into a new file and has to be saved...
View 2 Replies View RelatedLookup Across Worksheets & Return Matching Details
Jan 5, 2007I am trying to track cost. A master purchase order sheet has a column with a number relative to an account. I have about 50 accounts and a seperate sheet for each account. I want to enter the account number on the master purchase order sheet and based on that number, have the following data on that row copied to the next available row in the sheet for that account.
View 9 Replies View RelatedReturn Value By Multiple Matching And Unmatching Criteria
Jan 31, 2008I am developing Spreadsheet that you will enter a list of parts that you need. it will have many columns but only 4 are vital to the check. this will be generated for each project.
With each part i want to then look up in another file that is a list of all the possible parts you can have with there cost. this file will be standard for everything and it will be updated from time to time.
now not all the criteria to look up will be exact matches.
here is an example
code temp/pres rating diameter material
GLV 4500 15 16Mo3
in the other file we will have multipu entries for GLV with different values.
code temp/pres rating diameter material Cost Reference
GLV 4500 20 16Mo3 400 aaa1
GLV 5500 15 16Mo3 350 aab1
GLV 5000 15 16Mo3 300 aab2
GLV 5000 15 13CrMo4-5 600 acb1
GLV 5500 15 13CrMo4-5 600 acb2
For Code i need it to match (there are lots of codes even including variations like GLV.)
For Temp/pres rating i need it to be equal or higher to the value
For diameter i need a match
for material i need a match.
so as you can see from the list above there are 2 options. so then i want it to return the cheapest.
that is step one.
step two is to repeat it for multiple list of parts.
Lookup Across Columns & Return Matching Detail
Feb 26, 2008I am trying to track a score. A master capacity sheet has two columns with identifiers (upstream and downstream nodes) relative to a pipe segment. I have a separate sheet (condition sheet) with the corresponding scores. I want to enter the upstream and downstream node numbers in 2 columns (A & B) in the master capacity sheet, and based on the the upstream and downstream node numbers, have the corresponding score (from the condition sheet) on that row copied in the master capacity sheet.
View 6 Replies View RelatedReturn Matching Numbers By Comparing 2 Ranges
Apr 30, 2008I have a collum (A )with numbers and in other sheet have a collum (B)with numbers too.. and some numbers match. what i want is in the cells that the numbers match have other colum and i want to copy that number to another cell.
View 2 Replies View RelatedLookup Matching Values & Return Replacement
Aug 11, 2008Im trying to work out how to write some code to find and replace from a list.
I have key data in column P on sheet 1, and a list on sheet 2 with the same key data in column C.
Basicially, every month the data on sheet 1 changes (there are usually 100 rows of data each month) and what i want to do is, write some code to look down column P on sheet 1 and for every cell, find the corrosponding value on sheet 2 (column C). When it finds the value, copy and paste it onto sheet 3 then delete the row from sheet 2.
I hve written some code that can do the first part (copy and paste) and a second macro to do the deleting....but it is only for 1 value at a time...
Return Latest Date Based On Matching Criteria
Jul 25, 2014I am looking for a formula that returns the latest Sale date for a each model of car. Below is sample data which I am trying to use the formula. I tried with below formula, but not successful.
=MAX(INDEX($A$1:$C$40,MATCH(A2,$A$1:$C$40,0),3),1)
MakeModelSale Date
AudiA4 11-Jan-14
AudiA4 quattro 12-Jan-14
AudiA4 quattro3-Jan-14
AudiA5 Cabriolet 14-Jan-14
AudiA5 Cabriolet q15-Jan-14
AudiA4 16-Jan-14
AudiA4 quattro17-Jan-14
AudiA4 quattro18-Jan-14
AudiA6 quattro19-Jan-14
AudiA4 10-Jan-14
AudiA4 quattro09-Jan-14
AudiA4 quattro10-Jan-14
AudiA4 11-Jan-14
AudiA4 quattro11-Jan-14
AudiA4 quattro11-Jan-14
AudiA8L 11-Jan-14
AudiA8L 11-Jan-14