=MID(M11,FIND($V$6,M11),LEN($V$6))
I use the formula above to return the the matching word in v6, from text within m11. If theres is no match it returns #value. is it possible when theres no match to return "Not Match" in the cell instead
Have problems using find and the Dictionary
What Im trying to do is find a certain word in a string then return the number associated with that word
On Pipe worksheet, pipe numbers 1-203 are listed in column A. Each pipe number has a flow rate that is listed in column E. I need it to look up the pipe number in column A on the Job worksheet and report the flow rate (from the Pipe worksheet) in column D for each pipe.
View 5 Replies View RelatedI am trying to create a formula for a work report and I am afraid I am a bit of a novice with the more complex formulas. Here is what I am trying to do: Sheet 1 has Sales order numbers that duplicate based on the sales lines. Sheet 2 has single lines of sales order numbers and their assigned PO number. I would like to have Sheet 3 where it combines all data and duplicates and fills in the PO number to match all of the sales order numbers that repeat on the other sheet. I hope this makes sense. I can't seem to figure out if I need a VLookup or If or Match formula (or all of the above).
View 1 Replies View RelatedLooking to find 1 of 2 words in a cell in column B and return the word found in the same row in column E. This seemed easy but I am not having any luck.
the cells in column B have several words in them but I am looking for 2 specific words "PLAT" and "ORIG". If the word is not in the cell, it should show a blank cell in column E in the same row, otherwise one of the 2 words should be in that row in column E. A VBA loop would be ideal but a formula that can do it might work as well.
table1.jpg
I am looking for a formula that will satisfy the following:
1) find all the values in column "A" that match
2) In column "G", sum up all the values in "F" that go with the matching values in column "A"
3) For example, in rows 14-16, the values in column "A" match. Cell G16 sums up F14:F16
I would like to have a formula find a specific word in column L and return the sum from column E for the same fund from column C.
I tried using =SUMIF(L:L,"*annual*",E:E) but that gives me the sum of annual for the entire column. I need to be able to specify the fund.
word "annual" also appears in "semi annual" so I need to be able to separate the two.
I have pulled a task of Content Managent. we are going to look at a bunch of files for a key list of words. Is there a way look at the text in a file and find a word within it?
Reporting the link to the doc.. display ... will all come later.
I know it will be slow and may run for a day or two but I would run it over the week end.
I am having trouble getting my IF statement to test if the cell contains the text "sale" return "X" if not "Y". I need it to search through the text string in that cell and find a certain word, and if it finds that word, retrn a value. I am really having difficulty with is what symbol or function do I use for the logical test? (i.e. =, <>, MATCH, INDEX?)
View 4 Replies View RelatedAlright, so I need data in column A(Last names) and data in column B(First name) to match their respective names on another sheet. When a match is made, it will return column C(Hours worked).
I originally used Vlookup to match last names, something akin to =VLOOKUP(A:A,Week1!A:P,4,FALSE)
But this does not account for employees that may have the same last names. Is there a way to combine two vlookup's? Or is Index a possible solution?
In column "AT" I have a list of matchups between 2 soccer teams that looks like this
Row 1:Manchester UnitedArsenal
Row 2:Chelsea FCLiverpool
Row 3:TottenhamAston Villa
Row 4:Hull CityLiverpool
Row 5:Everton FCSunderland
Row 6:Bolton WanderersManchester United
Row 7:PortsmouthTottenham
Row 8:Birmingham CityStoke City
Row 9:WiganBlackburn Rovers
Row 10:LiverpoolFulham
In columns "AM" and "AN" I have a rating for the home and away team. So for example, AM row 3 would show the rating of Tottenham and AN row 3 would show the rating of Aston Villa.
Now what I want to do is set things up so that I don't have to enter every teams' rating in manually. I need a formula that would look from bottom to top (row 10 to 1), find the first row that contains Tottenham (for example), and then look to the right to either column AM or AN (depanding on if Tottenham is the first team in the matchup or second) and return the value in that cell.
I am attaching a sheet wherein I have tried to match two variables and to return the appropriate value. But I find the formula returns the value which one cell below the correct answer.
View 6 Replies View RelatedI have a userform with several textboxes. I am trying to get one of the textboxes to auto populate based on the entry in another textbox. example: I want to enter a customer ID in one box and then the customer name to automatically appear in another box. The customer ID and names are stored in another workbook.
View 6 Replies View RelatedI'd like to evaluate a series of columns where a value greater than 1 would return all matches in another worksheet. I can't seem to use LOOKUP or Pivot Tables effectively to do this.
For example
Task Week1 Week2 Week3
task1 5 8
task2 6 10
task3 5
I'd like to create a view that would show Week1 having one task (task1) that will take 5 (hours). Week2 should show task1 and task2, Week3 should show task2 and task3
I'm working on a excel sheet to compare data of 2 columns. One column (or array), let's say C3:C13 contains "x" in some of its cells. The other column, let's say P3:P13, contains "d" in some of its cell. What I would like to do is compare the cells of the same row, see if they contain any data and return 1.
So if C3 contains an "x" and P3 contains a "d", therefore it returns 1. If C4 doesn't have an "x" and P4 has a "d", it will return a 0.
The closest I can get to this is the following formula
=SUM(IF(AND(C3="x",P3="d"),1,0), IF(AND(C4="x",P4="d"),1,0), IF(AND(C5="x",P5="d"),1,0), IF(AND(C6="x",P6="d"),1,0)), IF(AND(C7="x",P7="d"),1,0)), IF(AND(C8="x",P9="d"),1,0)), IF(AND(C6="x",P6="d"),1,0))...
However, this formula is way too long. Is there another way of writting or simplifying this formula?
I'm trying to create a function in VBA,
I have a table of data and need to create a function which requires value (string), range and column number. This will then look for the value within the range and return the data for every match of specified value within the table.
I'm happy for the return value to be in the form:
val1;val2;val3;val4;...;val[n]
how to modify the below v looup formula so it returns only the first word instead of the whole value
=Vlookup($A7,DATA,13,0)
I am doing a comparison of locations but one sheet has just the Location, the other data is formated as Location-Address
I would just like to return the location as i have an IF formula which checks if both Match and because of this is returning false
Also ii anther part of my work book i am doing a look up on division, at present it is returning the Division name, However i would prefer it to just return the first 3 or 4 Initials of the look up
for example
if the division called err.. Apples Pears Plums Ltd i would like to return APP
if it were Apples Pears Plums Bananas Limited i would like return value to be APPB
As shown in the attachment, I'm trying to return value when matching cell B7 + D5 with cell G5:I7. Is there any way to do so?
Attached File: File Type: xlsx Book1.xlsx
I have a two different workbooks book 1 and book 2 with some data.
If values of first two columns ( Column A and B) of both workbooks are matching then I want a formula that can return the value of third column (column c) of book 2 in book 1 column c.
example:
Book 1
column A / Column B / Column C
100 / 200 /
Book 2
Column A / Column B / Column C
100 / 200 / 300
now I want a formula that can return in column C of book 1 to display 300.
And the data runs across some 100 rows in both workbooks.
I have used the merge facility to incoporate all the worksheets into one excel files. As they all have same heading, I have sorted the data, first by their account expiry time (oldest to newest) and then by manager (A-Z)
For example, system report generated on 15/03/2013, 28/03/2013, 03/04/2013, 15/05/2013, 28/05/2013 and so on and these are sheet names too. What I want is one worksheet called report with the same heading as my merged worksheets and return values where Column C in 28/03/2013 is compared to 15/03/2013 and if the employee ID matches than return the whole row of data for the report.
the next query would then be for finding employee ID in 03/04/2013 and comparing it with 28/03/2013 worksheet and returning the matched ID in report worksheet.
This is the layout of the report worksheet.
Display NameEmployee IDAccount StatusE-mailDepartmentManagerComment
15/03/2013 to 28/03/2013
28/03/2013 to 03/04/2013
03/04/2013 to 15/05/2013
15/05/2013 to 28/05/2013
so for the above report worksheet, if employee id matches the two compared worksheet (15/03/2013 to 28/03/2013) return all value (Display name, employee id, account status, email, department, manager, comment) from the 28/03/2013 and so on.
I have a worksheet with 2 columns. The first column contains names and the second column contains numbers associated with the name.
How can I specify a name, go through the sheet to find all the occurances of that name and then paste all the numbers associated with that name in another worksheet in a set position.
I have two sheets - one work sheet and the second - database with existing entries. Going by visual example below, I need the column C of the work sheet to automatically populate with the data pulled from the database sheet. For example, C4 on the Work sheet should find both values "Bike" and "Green" in one row on Database sheet and return the corresponding value 44444 from F97. The work sheet cells in the row C should remain empty if no match found on the database sheet.
Sheet 1 (Work sheet)
-------A--------B---------C
1---Auto-----Red
2---Auto----Green
3---Bike-----Red
4---Bike----Green
5---Bike-----Blue
Sheet 2 (Database)
-------A--------B---------F
12---Auto---Red----11111
37---Auto--Green---22222
85---Bike----Red----33333
97---Bike---Green--44444
102--Bike---Blue----55555
Is is possible to construct a vlookup to identify that there are duplicate values in the Lookup_value and the Table_array and return the second and third values in the Formula result?
In the acutal project the Lookup_values and Table_arrays are in separate worksheets, but I think the example below represents the issue I'm working with.
I'm using Excel 2010
ABCDEFG1=SUM(IF($A$2:$A$8=A2,1,0))=VLOOKUP(F2,$A$2:$B$8,2,FALSE)
2JOHN13BILL12BILL11BOB14MARY11FRED15JOHN23JOHN16FRED11JOHN17BOB11JOHN18JOHN33MARY1
I'm trying to compare 3 different worksheet in the same workbook and copying the unmatched values into a new worksheet. find the attached file. In the sample file, am comparing sheet1, sheet2 and sheet 3 with sheet1 as the base. the columns mite differ in their location but the column headers are same.. The difference, bolded cell, should be copied along with the header and the code, into a new file and has to be saved...
View 2 Replies View RelatedI am trying to track cost. A master purchase order sheet has a column with a number relative to an account. I have about 50 accounts and a seperate sheet for each account. I want to enter the account number on the master purchase order sheet and based on that number, have the following data on that row copied to the next available row in the sheet for that account.
View 9 Replies View RelatedI am developing Spreadsheet that you will enter a list of parts that you need. it will have many columns but only 4 are vital to the check. this will be generated for each project.
With each part i want to then look up in another file that is a list of all the possible parts you can have with there cost. this file will be standard for everything and it will be updated from time to time.
now not all the criteria to look up will be exact matches.
here is an example
code temp/pres rating diameter material
GLV 4500 15 16Mo3
in the other file we will have multipu entries for GLV with different values.
code temp/pres rating diameter material Cost Reference
GLV 4500 20 16Mo3 400 aaa1
GLV 5500 15 16Mo3 350 aab1
GLV 5000 15 16Mo3 300 aab2
GLV 5000 15 13CrMo4-5 600 acb1
GLV 5500 15 13CrMo4-5 600 acb2
For Code i need it to match (there are lots of codes even including variations like GLV.)
For Temp/pres rating i need it to be equal or higher to the value
For diameter i need a match
for material i need a match.
so as you can see from the list above there are 2 options. so then i want it to return the cheapest.
that is step one.
step two is to repeat it for multiple list of parts.
I am trying to track a score. A master capacity sheet has two columns with identifiers (upstream and downstream nodes) relative to a pipe segment. I have a separate sheet (condition sheet) with the corresponding scores. I want to enter the upstream and downstream node numbers in 2 columns (A & B) in the master capacity sheet, and based on the the upstream and downstream node numbers, have the corresponding score (from the condition sheet) on that row copied in the master capacity sheet.
View 6 Replies View RelatedI have a collum (A )with numbers and in other sheet have a collum (B)with numbers too.. and some numbers match. what i want is in the cells that the numbers match have other colum and i want to copy that number to another cell.
View 2 Replies View RelatedIm trying to work out how to write some code to find and replace from a list.
I have key data in column P on sheet 1, and a list on sheet 2 with the same key data in column C.
Basicially, every month the data on sheet 1 changes (there are usually 100 rows of data each month) and what i want to do is, write some code to look down column P on sheet 1 and for every cell, find the corrosponding value on sheet 2 (column C). When it finds the value, copy and paste it onto sheet 3 then delete the row from sheet 2.
I hve written some code that can do the first part (copy and paste) and a second macro to do the deleting....but it is only for 1 value at a time...
Column B has values 1 2 or 3
I don't care about 2 or 3
If Cell B2=1 and cell C2 is blank, return the word "Fix"
If C2 has a value, leave blank
If B2= 2 or 3, leave blank
Then, as I "fix" these guys, it involvse inserting or deleting cells. which seems to screw up the formula
