I'm trying to compare 3 different worksheet in the same workbook and copying the unmatched values into a new worksheet. find the attached file. In the sample file, am comparing sheet1, sheet2 and sheet 3 with sheet1 as the base. the columns mite differ in their location but the column headers are same.. The difference, bolded cell, should be copied along with the header and the code, into a new file and has to be saved...
View 2 RepliesI am trying to track cost. A master purchase order sheet has a column with a number relative to an account. I have about 50 accounts and a seperate sheet for each account. I want to enter the account number on the master purchase order sheet and based on that number, have the following data on that row copied to the next available row in the sheet for that account.
View 9 Replies View RelatedIn column "AT" I have a list of matchups between 2 soccer teams that looks like this
Row 1:Manchester UnitedArsenal
Row 2:Chelsea FCLiverpool
Row 3:TottenhamAston Villa
Row 4:Hull CityLiverpool
Row 5:Everton FCSunderland
Row 6:Bolton WanderersManchester United
Row 7:PortsmouthTottenham
Row 8:Birmingham CityStoke City
Row 9:WiganBlackburn Rovers
Row 10:LiverpoolFulham
In columns "AM" and "AN" I have a rating for the home and away team. So for example, AM row 3 would show the rating of Tottenham and AN row 3 would show the rating of Aston Villa.
Now what I want to do is set things up so that I don't have to enter every teams' rating in manually. I need a formula that would look from bottom to top (row 10 to 1), find the first row that contains Tottenham (for example), and then look to the right to either column AM or AN (depanding on if Tottenham is the first team in the matchup or second) and return the value in that cell.
I am trying to track a score. A master capacity sheet has two columns with identifiers (upstream and downstream nodes) relative to a pipe segment. I have a separate sheet (condition sheet) with the corresponding scores. I want to enter the upstream and downstream node numbers in 2 columns (A & B) in the master capacity sheet, and based on the the upstream and downstream node numbers, have the corresponding score (from the condition sheet) on that row copied in the master capacity sheet.
View 6 Replies View RelatedIm trying to work out how to write some code to find and replace from a list.
I have key data in column P on sheet 1, and a list on sheet 2 with the same key data in column C.
Basicially, every month the data on sheet 1 changes (there are usually 100 rows of data each month) and what i want to do is, write some code to look down column P on sheet 1 and for every cell, find the corrosponding value on sheet 2 (column C). When it finds the value, copy and paste it onto sheet 3 then delete the row from sheet 2.
I hve written some code that can do the first part (copy and paste) and a second macro to do the deleting....but it is only for 1 value at a time...
On " sheet 1" I have a cell A1 with a number 12550 in it. On the following 6adjacent cells from B1 to G1 there are specific values assigned to them.
(Eg. $20, $30, $40, pork, 145, and spicy). There are currently 4 worksheets in the workbook and some of the worksheets contains the value "12550" in CellA1 of Sheet 1 while others don't.
I wish to search in a similiar column, from A1 to A50, throughout sheet 2, 3 and 4, for the value of "12550". Once the value is found in a sheet, the corresponding values to the 6 adjacent cells (from B1-G1 in Sheet1), are copied and pasted next to the "12550"cell. If there are no "12550" cells found in a sheet, the macro should continue as normal.
I have a very large spreadsheet of customer information(I call it the master spreadsheet). Each row contains only 3 things: Account number, product bought, Price
Later I receive the money from the customer for that product(the pay sheet) that contains the exact same thing in the same order: Account number, Product bought, Price paid.
What I'm trying to do is compare the two spreadsheets so that when i receive the pay sheet of cusomters who have paid with the amount it will deduct it from the master sheet.
So it should compare account numbers when it finds a match then it should subtract the amount paid (column C) from the master spreadheet price column(column C also).
sometimes customers don't pay the right price so it has to be a subtraction so I can see if it was over paied, underpaid etc.
Right now I'm still doing it manually combining the two documents sorting it by account number and checking for matches in column A (account number).
see teh attached file, you can see on the file. Worksheet B of B62, I typed 15254", it col name "yarn count" and the product code you can see is Q921 at cell A62. Worksheet A, you can see F2 is Q921, col name is "product code". Now I just plugin a vlaue B62 ='15254' and I want it shows on worksheet A - G2 but remember it must match the product code of worksheetB - cellA62 'Q921' and worksheet A cell F2 'Q92' because next time user will plugin a number ie.1111 on B164; where product code of worksheet B - cell A164 must be match to worksheet A - cell F3, but it should show the value 1111 on cell G3.
View 2 Replies View RelatedI am looking for a way to add cells to a master workbook from matching cells in various other workbooks. The master will have the complete list of store numbers. The other files will just show the store number that had returns. I need to add a new column to the master workbook for each of the other files. If that makes sense?? So the master report header row will have: storeno,storename,3-1-06,3-15-06,4-1-06,4-15-06, etc..... Then column a will be a listing of the store number 1 -200.
View 2 Replies View RelatedI am trying to compare deductions from two different pay periods. I have the Data from check 1 & check 2 on different worksheets, in no order, and would like the data to auto populate on a third worksheet into a side-by-side comparison of the data. The problem comes when there is a deduction missed or a new deduction that only shows up on one of the two checks. I am having to manually insert lines to make my side-by-side comparison match. Is there a macro or something that can pull the data from these two soures and display them in a side-by-side comparison even if there is no match?
View 1 Replies View RelatedI have a workbook with 3 sheets. AP, Move, Match. AP & Move will be about 40,000 lines.
I need a macro that will take the data from those two sheets and match them up on the match sheet by column A Line by line with all data moving over. An example is attached.
I'm not sure if this is possible, but please let me know if you need more info because I really don't want to do this manually. Anything that doesn't match I just need a blank line. I can add the true-false formula, but if it would fit in the macro that would be cool to.
how to figure it out this lookup problem (lookup using partial string of match)...
View 5 Replies View RelatedI have rankings from several different sources all with different rankings for different people with a different number of people in each set of rankings.
I would like to match the names from each ranking set and place the corresponding ranking into one worksheet. I have done this without the code but over the course of the next couple of months the rankings will be changing.
I have them importing from the web so when they update I would also like for my rankings to update. Attached is the rankings each in their own worksheet.
The final sheet is what the end product looks like.
I've got 2 worksheets SH1 & SH2( Two different workbooks) Col A is NAME in each Sheet. Need to Match Col A Sheet 2 to Col A Sh1 if they are identical. If identical copy info from Col B, and Col E- G to Sheet 1 Col B and Col H-J. If a Name is in Sh2 but not in Sh1, Copy (using same Column positions: copy info from Col B, and Col E- G to Sheet 1 Col B and Col H-J ) to NEXT AVAILABLE ROW in Sh1 COL A, and highlight it in Some bright color ; Then open a MSG Box telling me how many new names were added.
View 8 Replies View RelatedI have to write a macro that will copy the values of 'Items' in 'worksheet 2' to 'Items' in 'worksheet 1' ONLY when the 'Title' value is matching in both worksheets AND the value of ' Heading' in worksheet 2 is 'Entry1'.
Example:
Worksheet 1:
Title |Items
David
Bill
John
Worksheet 2:
Title |Items |Heading
David |A, B, C |Entry1
David |A, B |Entry2
Bill |A, B, C |Entry1
Bill |A, B, D |Entry2
John |G, H, J |Entry1
Gerry |G, H, R |Entry1
From the above data, I want the macro to compare 'Worksheet 1' with 'Worksheet 2' and only copy the 'Items' that have a matching 'Title' AND a 'Heading 1' value of 'Entry1'
So the final result should be:
Worksheet 1:
Title |Items
David |A, B, C
Bill |A, B, C
John |G, H, J
I have seen examples of compare used but not sure how to apply it to my case.
Code:
Private Sub GetColData()
Dim SrchRng As Range
Dim SrchVal As Range
[Code]...
And it is also possible by using Column Number to retrieve the data SrchTxt, which is in a cell in the Row, in which "Roy" is found. This Row in this example is Row 5. Column Number may be anything within the search Range. Column Number is 3 in this example.
In Sheet1 "Poet" is in C1. (SrchTxt)
How to retrieve data of the cell in Row 1 in the column where "Roy" is found?
I'm working on a excel sheet to compare data of 2 columns. One column (or array), let's say C3:C13 contains "x" in some of its cells. The other column, let's say P3:P13, contains "d" in some of its cell. What I would like to do is compare the cells of the same row, see if they contain any data and return 1.
So if C3 contains an "x" and P3 contains a "d", therefore it returns 1. If C4 doesn't have an "x" and P4 has a "d", it will return a 0.
The closest I can get to this is the following formula
=SUM(IF(AND(C3="x",P3="d"),1,0), IF(AND(C4="x",P4="d"),1,0), IF(AND(C5="x",P5="d"),1,0), IF(AND(C6="x",P6="d"),1,0)), IF(AND(C7="x",P7="d"),1,0)), IF(AND(C8="x",P9="d"),1,0)), IF(AND(C6="x",P6="d"),1,0))...
However, this formula is way too long. Is there another way of writting or simplifying this formula?
I'm trying to create a function in VBA,
I have a table of data and need to create a function which requires value (string), range and column number. This will then look for the value within the range and return the data for every match of specified value within the table.
I'm happy for the return value to be in the form:
val1;val2;val3;val4;...;val[n]
I have a excel workbook, which sheet2 (vehicle arrangement) is master data sheet. which column headings are match with other worksheets. whenever I put the cell value of any multiple rows or column, the cell value (number) and rows (text) are copy or show in the particular sheet which name match with column head.
Sample:
Customer Name
ORDER
MMT
TIL
VBG
JKL
SSL
RDF
ERG
RFG
ERRT
WC
ARS
YUH
TOTAL
M/S XYZ
50
[Code] .......
Worksheets are names as column names is here.. "MMT","TIL", "VBG"........"YUH". So whenever I give the cell value under the column head the same value and corresponding row (customer name) should be show in the particular column head worksheet.
1) I have a Master worksheet that combines/appends data from 5 worksheets. The data in the 5 worksheets is cleared on a daily basis once data has been transferred (using a macro) to the Maser sheet.
2) I use the Match and Index formula for the 5 sheets. Column A "Symbol" being the primary value
Problem:
I have Matching column headings " Date" in 2 worksheets, I can only use date data from one of the sheets that contain the date column data. Here is the formula I use in the master to accept data from the worksheet
=If(Sheet1!C2=0,"",Sheet1!C2)
Sheet1 has the column heading "Date" that is linked to Master Worksheet column Heading "Date". Is there a possible way to re-write the formula where It can accept data from either sheets instead of only 1 sheet?
Going back to the fact that I have 2 date columns in 2 worksheets
Lets say for example;
I have Symbol AAA in Sheet1
I have Symbol ZZZ in Sheet2
I have Symbol GGG in both sheets......................
I want to lookup the tags in sheet1 on sheet2 and see if they have a date in columnB. whatever date is in columnB sheet2 i want that same date to show up on sheet1. but if the there is no date i want the cell to remain blank. do i make any sense at all? look at my example. example2.xls
View 3 Replies View RelatedI have a book with multiple tabs in it. The first is a master customer file, including customer numbers. The next two tabs include multiple references to the same customers because they list multiple shipping addresses and contacts for each customer on a separate line. I want to be able to have the additional tabs refer to the master list and find the customer name, then return the corresponding customer # in the previous column for that customer. This is what I came up with: =IF(B:B=Sheet2!B:B,Sheet1!A:A,0). But the results simply returns numbers that increase by 1. It should repeat the same customer # for the number of times that customer name is listed based on how many addresses or contacts there are. What am I not doing right?
View 9 Replies View RelatedHow to return all possible values based on a single lookup ( or another condition / macro )
I have a table in B5:E100
In A1 I have a value
I need to look in B5:B100 for the value in A1 then place the contents of B:E for those cells in G5:J5 downwards
Encryption algorythim.xlsx
Here is my scenario I have all this data i want to search in. In the rows there are repeating values and in the columns they do not repeat.
As seen in the attached i am able to give a column and row by title and then get the intersecting cell data from that. (Encryption lookup)
What i want to do is give the column tittle and row value and get back the row title. (Decryption Lookup)
This shouldn't be too hard seeing that the data in the columns has no repeats.
I have all my data on sheet 2 which contains tables that relate to information on regions, manufacturers, etc so it can be a large amount of tables which will change from month to month depending on a monthly list.
For example, if “Region 1” is in cell B134 – the resulting data I need to pull out will be contained in C138:G232 ...or ”Region 2” which is in B235 – table info is in C239:G333, etc, etc.
On sheet 1, I have a cell (L7) that is populated by another formula. This cell is effectively my lookup to pull out information from sheet2 to populate cells in (sheet1) AE119:AH212 - same sheet as the reference (L7).
I need to look up the reference/resulting value that is in L7 on sheet1, find and match against the values in column B on sheet 2 and then pull in the corresponding table information.
If the value in L7 was not changing at all I could do.. in cell AE119… =OFFSET(sheet2!B134,4,1,1,1) etc etc
... but I am at a loss as to the value in L7 changing and incorporating a lookup… or maybe I am looking at it wrong..?
I have looked up match, offset, index and lookups on the forum and have managed to confuse myself even more. I have even tried taking some of the example formulas and amending with my references but to no avail.
Got a bit of a stinker here. (Well, it is for me anyway. I haven't used Excel in months)!
I want to use a VLOOKUP function (I think) to retrieve data from a list of Exchange Rates on a separate sheet.
The user enters a 'Period' number, selects an 'exchange' variable (the blue text cells). The hope is to lookup the data on the 'FX RATES 06-07' sheet and return the result in the green cells.
I've tried using VLOOKUP but one of the arguements specifies that you nominate a column to return the information - that's the problem, we don't know that information when asking Excel.
I have an array in excel, 4 columns: Month, Day, Stock, Price. I dont know the most efficient way to handle arrays. I know i can loop through an entire array to find a specific value, but if i have a large array, this doesnt seem efficient.
For example, I would like to find the price in an Array (or Range), when i know the value of two columns. If this were in a database, I would write sql like this: " select Price from TABLE where month = 1 and Day = 3". The result would be 40.21. How can i do this with an array? I have attached a sample spreadsheet with the example mentioned above..
I have two excel workbooks, i.e target.xls and source.xls. Assume
target.xls looks like this
letter number sound
a 1 a
b 2 be
c 3 cee
d 4 dee
e 5 ee
f 6 eff
g 7 gee
source.xls looks like this
letter number
a I
c III
d IV
g VII
In the target file, I want to be able to change the numbers of the letters found in the source file, so that the new target file will look like this.
new target.xls
letter number sound
a I a
b 2 be
c III cee
d IV dee
e 5 ee
f 6 eff
g VII gee
I believe there must be a simple way to do this using VBA.
The main worksheet in my workbook contains lists of suppliers with unique Vendor Numbers, of which there are approximately 4,500 rows. There is another worksheet which holds approximately 6,500 entries I need to bring data from that sheet to the main sheet using the Vendor Number and the information that is held on 4 columns unique to that number.
The information is a classification system that comprises of 4 columns holding a mixture of numbers and text.
Worksheet 1 has the Vendor Number in Column A and the Classification destination starting in Columns Q, R, S & T.
Worksheet 2 once again has the Vender Number in Column A, and the Classification information in Columns C, D, E & F.
What I need guidance on is how to build the formula to copy the information across, or direction into what other method I should be looking at instead.
I have a simple lists containing two columns. One column contains a five digit number and the other a vendor name. The vendor name in most cases is two to four words. I am wanting to type in a partial string of the vendor name and it return to me the 5 digit 'vendor' number.
Col A Col B
20567 3M Electrical, Inc.
I want to type in '3m' or '3M' or 'electrical' or 'ELECTRI' and it return the 20567. The other part of this is that there may be two rows with the same info in which I would need to see both...
Col A Col B
20567 3M Electrical, Inc.
21789 3M Tape Division
Is this possible with standard lookup features in Excel or does someone have a VbScript or macro that will accomplish this?