Tracking Forums, Newsgroups, Maling Lists
Home Scripts Tutorials Tracker Forums
  Advanced Search
  HOME    TRACKER    Excel


Find Cells Matching Value & Return Adjacent Details

On Pipe worksheet, pipe numbers 1-203 are listed in column A. Each pipe number has a flow rate that is listed in column E. I need it to look up the pipe number in column A on the Job worksheet and report the flow rate (from the Pipe worksheet) in column D for each pipe.

View Complete Thread with Replies

Sponsored Links:

Related Forum Messages:
Lookup Across Worksheets & Return Matching Details
I am trying to track cost. A master purchase order sheet has a column with a number relative to an account. I have about 50 accounts and a seperate sheet for each account. I want to enter the account number on the master purchase order sheet and based on that number, have the following data on that row copied to the next available row in the sheet for that account.

View Replies!   View Related
Search To Find Matching Cells And Copy/transpose Adjacent Data To Original Sheet?
I'm trying to find a way to search a second sheet in a workbook for specific criteria outlined in a first sheet (in my attached example, from A3 downwards within the 'list of search criteria' sheet), and then to copy any secondary data found against a successful search match to the original sheet, transposed against its corresponding matched search term.

As you can see in the example, the search term 'bindi' (A4 in the 'list of search criteria' sheet) appears in the 'data' sheet 3 times - the secondary data for these occurences ('feathery', 'Fibonacci', 'glassy') is copied to the 'bindi' row on the first sheet and is offset with each copy to produce a transposed-esque effect of copy and paste.

If it's any help, there are a maximum of 9 matches for a single search term in the real document.

Thanks in advance for your help... I tried to adapt a previous solution given to me for a similar question but failed miserably. I bow humbly to your expertise!

View Replies!   View Related
Find 1st & Nth Occurence & Return Adjacent Value
I was wondering if you have similar values how you use formulae to return the first or the last value from a list?

I have attached an example and I was wondering if you guys could have a look at it?

View Replies!   View Related
Find Date In Column & Return Adjacent Cell Value
I have a spreadsheet with a column A of dates April 08, May 08, June 08 etc. Adjacent to each of these dates is a value in column B. I want to select the appropriate value relevent to the current date and use it elsewhere. Therefore if it happens to be Oct 08 when I open the spreadsheet I want the value in column B, adjacent to Oct 08 to be represented.

View Replies!   View Related
MID FIND LEN (return The Matching Word In V6)
I use the formula above to return the the matching word in v6, from text within m11. If theres is no match it returns #value. is it possible when theres no match to return "Not Match" in the cell instead

View Replies!   View Related
Find First Blank Cell In Column & Return Adjacent Date Less Than Or Equal To Today
how to make the data look like a table with three columns. Other than the date, it is space delimited. I have a tracking spreadsheet where Column A is populated with dates for the year. Column C contains daily values.

I don't always start entering daily values on the first day of the year, e.g., this year the first value in Column C corresponds to March 9. All values in Column C are contiguous - there are no blank cells until the value in Column A is greater than today's date code. I would like to use a formula (rather than VBA) to look down Column C and find the first non-blank entry where the value in Column A is less than or equal to today(). In this case, the formula should return the value for March 9, 2008.


March 1, 2008Saturday
March 2, 2008Sunday
March 3, 2008Monday
March 4, 2008Tuesday
March 5, 2008Wednesday ...................

View Replies!   View Related
Search Range, Return Adjacent Cells Of Matches
I can solve my problem with a pivot table, and with VBA easily...however, I'm interested in knowing if this can be done with formulas (array formulas using index/match I'm assuming).

Goal: On sheet1 I have one column with products, then the column next to it will have an "Y" in it if the product is to be selected (blank if not). On sheet2 I want to create a list of the products that were selected (having the "Y"). The only thing stumping me is that I do not want spaces between the product list on sheet2...just a nice continuous list. Example:

cup Y
bowl Y
knife Y





View Replies!   View Related
Lookup Column Values On Another Sheet & Return Adjacent Cells
Essentially, sheet b is a list of 900 people I need to mail to. Sheet a has 3000 rows of people, many of whom don't need the mailing. It has mailing addresses that we need in sheet b.

We have two worksheets, sheet a and sheet b

compare sheet b, column c (email addresses) to sheet a, column x, (email addresses).
If they match, move sheet a, columns d, e, f, g, and h to sheet b.

View Replies!   View Related
Lookup/Match Column Values On Another Worksheet & Return Adjacent Cells
I have two excel sheets. The first sheet has a column with codes and another column with dates. There are more than one date for the same code. The second sheet has just one unique code. I would like to match the code on the second sheet with the code on the first sheet and return ALL the dates associated with that code to the second sheet - horizontally.

View Replies!   View Related
Find Adjacent Cells On Double Click
I have two columns in a spreadsheet.

In cell "$D$3" is the word "Period 1".

I want to be able to do the following.

Double click on cell D3, where the word period 1 is.

VBA then looks up that period in column B, and finds the corresponding weeks for period 1 from column A.

I then want VBA to list these weeks next to the period 1 I double clicked, so in column E.

I have attached a spreadsheet as an example.

View Replies!   View Related
Find All Occurences Of 1 Value & Replace Adjacent Cells
On the worksheet, I need to find wherever the cell value begins '2 X 4 ...' in column L, and then replace the cell value in the same row, in column K, with '113010'. In my attempts, my code just changes the first occurrence, not all occurrences.

I want to use VBA to do this.

Here's my code so far:

Sub Update_Product_IDs()

Application. ScreenUpdating = False
Dim i As Integer, iCount As Integer
Dim numberOfPMDs As Integer
Dim PMD_Name As Integer
Dim worksheetName As String
Dim worksheets_in_file As Integer
worksheets_in_file = Worksheets.Count
worksheetName = Worksheets(2).Name
numberOfPMDs = worksheets_in_file - 1

View Replies!   View Related
Find Value Specified & Calculate Based On Adjacent Cells
I am really stumped at this particular point in my coding. What I am trying to do is to have a user input an ID number. When they click OK, I want to find the ID number and then subtract 1 from a number that is 13 columns over. So if the ID number is "123456789" and that matches the value in A3, I want to subtract 1 from the amount in M3 (leaving the new value in cell M3). So, if M3 was 30, now it would be 29.

View Replies!   View Related
Find All Instances Of Word And List Adjacent Cells
I have a sheet where in one column, the word "high" will be repeated. I need to find these multiples and then list down in a seperate column the text relevant to each of those multiples (contained in an adjacent cell). I.e if A1 & A3 hold the text "high", take the corresponding values in b1 & B3 and list them in new column C (C1 & C2 continuing in sequential order). I have searched the forums but i can' t seem to find anything.

View Replies!   View Related
Find Cell Value In Column & Return Text In Adjacent Cell
I have a drop down list in a merged cell B12-F12 and B13-F13 and B14-F14 . . . B30-F30.

I need the adjacent merged cell to populate a reason (text) based on the text answer in the drop down list or the entered text in the first merged cell. For example in the cell B12-F12 the user picks from the list or types in "Amiodarone." I want the adjacent merged cell G12-J12to automatically fill with "Heart Rhythm." I also want to be able to set up multiple if - them statements like if Amiodarone is entered then fill adjacent cell with Heart Rhythm and if Toprol XL then fill adjacent cell with Heart / Blood pressure and if simvastatin then fill adjacent cell with Cholesterol, etc. I have about 30 different options for cell 1 that I want to have auto fill in cell 2 based on the contents of cell 1. I've attached my file.

I want the user to be able to choose from the list or type the drug name in.

View Replies!   View Related
Find Cell Value In Another Workbook & Return Adjacent Cell
I am trying to complete these steps:

Take a value from AK59 from the "EQF" tab in a file called "QuoteMaster.xls"

Use that value to find match in column "A" in a Seperate workbook "ITMSTR.xls" on the "Sheet1" tab

Offset to the right 1 cell of the found value, take back to the "QuoteMaster.xls" and put in cell "AN59"

My code comes up with no errors, it opens the file and closes is as shown, but it doesn't copy the value over for whatever reason...

View Replies!   View Related
Find Rows With Cells Matching Criteria
I want to read information from the "Mapping" sheet, then find information in the "GLEX" sheet that correspond to the read information, then copy the information that was found in "GLEX" to the "Calc" sheet and add it all together and display the sum in a particular cell in the "Report" sheet.

The "Mapping" sheet is a mapping of information to show what makes up a particular total and where it must be entered in the "Report" sheet. The "GLEX" sheet is the output from a financial system and the source of the information that must be "reformatted" to the "Report" sheet. The information is only an extract as the whole totals to around 10MB. I have also deleted the "Report" sheet as it is fairly big on it's own, but the principal will be the same, I think. (If i should upload the "Report" sheet,)

Step 1:
"Column A" and "Column B" of "Mapping" are the starting points. The macro must read the values in "Mapping" "Column A" and "Column B" and remember them. Then it must find the row in "GLEX" "Column A" where the information from "Mapping" "Column A" matches and where the information from "Mapping" "Column B" matches with the information from "GLEX" "Column E".

Step 2:......................

View Replies!   View Related
Return Details Corresponding To Date
I'm trying to create a dynamic data table which has dates (in reverse chronological order) going down column A.

I want to find the value for a commodity (say bananas) which is housed in a master data table, based on the date that's in column A.

View Replies!   View Related
Find Value In Column And Return Value From Adjacent Column
I have are two worksheets, "Sheet 1" which is a bill of lading form and "Sheet 2," in which columns A and B contain Part Numbers and Weights respectively.

What I'm wanting to have happen is when a user inputs a part number into Sheet 1 (say in cell B6), it calls a UDF that looks up the part number on sheet two column A and returns the corresponding weight from column B (to say cell C6 on sheet 1).

View Replies!   View Related
Compare 2 Lists & Return Details
I have a list of two rows of over 20,000 items. I would like to know what data has been added to the second row from the first row and what has been removed.

View Replies!   View Related
Return Offset Details For Duplicate Names
I have a list of about 1000 names with 2 columns next to it. The first contains a list of different groups that the names belong to (there are 19 possible groups). The second contains a list of figures ranging between £10,000 and £500,000. I want a formula that will look for a name in the list and, when it finds the name, return the corresponding group and corresponding amount. My problem is that some names are in more than one group and therefore appear in column 1 more than once. I have tried to use the LOOKUP formula [eg looking for the GROUP =LOOKUP(Sheet1!B33, Sheet2!A:A, Sheet2!B:B)] but when a name appears more than once I cant get all the results - for example:

Mr Phil LittleGreen Group35,000
Mr Ed GrantRed Group20,000
Mr Robert SmithOrange Group10,000
Mr Robert SmithRed Group50,000
Mr Robert SmithGreen Group75,000
Mr James MorrisonGreen Group100,000

On my summary page (Sheet1) I would like to type in Mr Robert Smith (into cell Sheet1!B33) and in the rows below (obviously in 9 different cells) have the results appear but I can only ever get Mr Robert SmithGreen Group75,000 as a result. This is my first post so I hope I have obeyed all the rules and this is clear

View Replies!   View Related
Counting Matching Numbers In Two Adjacent Columns
I have a fairly large spread sheet where I need to count the number of instances where the number in one column matches the number adjacent to it in a second column.

View Replies!   View Related
Find Details Of Deleted Rows
In excel, is there anyway to find the details(history) of the previously deleted rows (using vba or anyother way)?

View Replies!   View Related
Find Text Within Cells & Place Same Text In Adjacent Column
I want to search for a word in column A and when I find it I want to copy it to column B.
Column A is a description that can be 6 or 7 words long. Column B is a single word.


Col A
Engine Kit, V-8, 306, forged.
I need to copy the word Kit to column B.

View Replies!   View Related
Find Cell, Copy Adjacent Cell Or Cells To Clipboard
Here’s what I want to do in VBA

1. Put a value in cell H1 (text and numbers)

2. Find a matching value in column A (starting in row 2), error message if the is not a match.

3. Copy the adjacent cell column B (rows vary) to the clip board. It would copy until it found the first blank row.

I have attached a scaled down version of the spreadsheet, the one I use has 100's of codes. I know some VBA but not much. I searched the forum but could not find anything.

View Replies!   View Related
Find Two Cells Then Return Value At Intersection
I have a code which locates a value in a column, and locates a word in a row. I've then tried to return the value that intersects these to findings. eg. The code finds a value in "A10", and a value in "E5", The code then needs to return the value in "A5".

View Replies!   View Related
Details Of A Person Say Age And Put The Details In Another Table
I was interested in getting Excel to look up details of a person say age and put the details in another table under the correct heading.

E.g. Fred Bloggs age 25

Would look like this

First Name Surname 16-24 25 - 49

Fred Bloggs 0 Tick or something

View Replies!   View Related
How To Return Value Adjacent To Cell From Another Sheet?
I have one column of about 10 names (each of which is unique). The cell adjacent to these names is empty and I want to insert a value into this cell.

The value I'd like to insert into this cell is located in another sheet attached to the same file. This sheet has the same layout, except the unique name has the value next to it and the order of the names is different.

I'd like the formula to determine where the name from the first sheet matches the name from the second sheet. I'd like it to then display the data associated with that unique name in the first sheet, adjacent to the name in the blank cell.

View Replies!   View Related
Function To Return Value Of Adjacent Cell
I am trying to write a function that will return the value in cell B based on its position adjacent to cell A (above). Cell A contains its own formula and may the values may change.

View Replies!   View Related
Lookup & Return Adjacent Value From Left
I have two worksheets. The first one contains 500 rows:

Column A - Company Name
Column J - Formula that calculates a 'company score' based on other data in columns B-H
Column K - Number of directors

The second worksheet contains over 3000 rows:

Column A - Name
Column B - Company
Column C - Designation

I want to caculate a score for each person (from worksheet 2) that does the following:

Personal Score = ('Company Score' / No. of directors) * Designation Weighting

Where Designation Weighting (numerical value) is determined by Designation (text). There are 10 different and mutually exclusive types of text in the Designation column.

My problem is compounded by the fact that each person (in worksheet 2) can be directors on several companies. The Personal Score that I want to calculate needs to recognise which different companies they are directors of and sum the scores derived from each company.

View Replies!   View Related
Lookup & Return Adjacent Result
I have a list of people with SSN, about 3000. This list contains business done by each individual, which can be in all 50 states. I have another list of the same individuals with just their name and addresses and what we call "client number". I need to put the client number with the list for the individual states. See example list:

List of individuals with client numbers

123 John Doe
456 Jane Doe

List of individuals with state business

John Doe AR
John Doe CO
John Doe FL
John Doe MS
John Doe TX
Jane Doe MS
Jane Doe TX
Jane Doe AZ

I need for those client numbers to appear in the column before the names on list with states.


123 John Doe AR
123 John Doe CO
123 John Doe FL
456 Jane Doe MS
456 Jane Doe TX

View Replies!   View Related
Return Data Adjacent To Found Values
Is it possible to write some VBA code that will copy IDs from Sheet1 and then find these IDs in Sheet2 and return the values these IDs have?

View Replies!   View Related
Lookup Left Most Column & Return Adjacent Value
Basically what I am trying to do is use a Lookup formula on a sales invoice where the product name and product price will be automatically entered into the sales form when the product ID is entered. What would the formula be?

Product Information
RegionProduct IDProduct NameProduct Price
Product IDHPPHomeware Pizza Pan19.95
Product NameSPPStone Pizza Pan 29.95
Product PriceHCDHomeware Casserole Dish19.95
Units SoldHCPHomeware Cookie Pan 9.95
Total SaleCWChina Wok 19.95
HEWHomeware Electric Wok29.95
WCMWilson Coffee Machine29.95
HBMHomeware Bread Machine49.95
HBMDHomeware Bread Machine -Deluxe89.95
HRHomeware Rotisserie119.95
OGGOlson Gas Grill 159.95
OEGOlson Electric Grill 159.95

View Replies!   View Related
Lookup & Return Values Of Adjacent Column To Textbox
I have an excel sheet with cols of information e.g IDNo, FirstName,LastName etc. I have created a form in VB where you enter the IDNo (& Click on a command button called View) It should populate designated textboxes on the Form. Thus it should check the col where the IDNo is stored, find the IDNo and populate the adjacent cols i.e FirstName, LastName in designated textboxes on the form.

View Replies!   View Related
Lookup Nth Occurrence Of Date & Return Adjacent Cell
I have a list of dates in column AF. I would like to retrieve a value from the 2nd occurrence of a date, so I used the function for the Nth Occurrence on this website as follows:

Function Nth_Occurrence(range_look As Range, find_it As String, _
occurrence As Long, offset_row As Long, offset_col As Long)
Dim lCount As Long
Dim rFound As Range
Set rFound = range_look.Cells(1, 1)
For lCount = 1 To occurrence
Set rFound = range_look. Find(find_it, rFound, xlValues, xlWhole)
Next lCount
Nth_Occurrence = rFound.Offset(offset_row, offset_col)
End Function

The excel formula I am using is as follows: =Nth_Occurrence(AF2:AF622,AE2,2,0,1)
Where AE2 is the date I am looking up. My question is this: When I put in a date ("1/12/2007") instead of AE2, i get the correct value. I tried giving AE2 and the AF column the same date formatting (3/14/2001), but this doesn't work. The date I am searching for also changes, so I cannot just type the date into the excel formula.

View Replies!   View Related
Adjacent Cell After Find
I am trying to calculate an adjacent cell to place an interger value after a find result. The following example, lets say location=$L$5, I need to calculate Cells(13,5).Value =n. Its for a page number and the cell I need is always to the right of the found cell.

View Replies!   View Related
Lookup And Return Matching Value
In column "AT" I have a list of matchups between 2 soccer teams that looks like this

Row 1:Manchester UnitedArsenal
Row 2:Chelsea FCLiverpool
Row 3:TottenhamAston Villa
Row 4:Hull CityLiverpool
Row 5:Everton FCSunderland
Row 6:Bolton WanderersManchester United
Row 7:PortsmouthTottenham
Row 8:Birmingham CityStoke City
Row 9:WiganBlackburn Rovers
Row 10:LiverpoolFulham

In columns "AM" and "AN" I have a rating for the home and away team. So for example, AM row 3 would show the rating of Tottenham and AN row 3 would show the rating of Aston Villa.

Now what I want to do is set things up so that I don't have to enter every teams' rating in manually. I need a formula that would look from bottom to top (row 10 to 1), find the first row that contains Tottenham (for example), and then look to the right to either column AM or AN (depanding on if Tottenham is the first team in the matchup or second) and return the value in that cell.

View Replies!   View Related
Return Matching Name To ID In TextBox
I have a userform with several textboxes. I am trying to get one of the textboxes to auto populate based on the entry in another textbox. example: I want to enter a customer ID in one box and then the customer name to automatically appear in another box. The customer ID and names are stored in another workbook.

View Replies!   View Related
Return Value After Matching Two Variables
I am attaching a sheet wherein I have tried to match two variables and to return the appropriate value. But I find the formula returns the value which one cell below the correct answer.

View Replies!   View Related
Return All Matching Occurences
I'd like to evaluate a series of columns where a value greater than 1 would return all matches in another worksheet. I can't seem to use LOOKUP or Pivot Tables effectively to do this.

For example
Task Week1 Week2 Week3
task1 5 8
task2 6 10
task3 5

I'd like to create a view that would show Week1 having one task (task1) that will take 5 (hours). Week2 should show task1 and task2, Week3 should show task2 and task3

View Replies!   View Related
Matching Data In 2 Columns To Return 1.
I'm working on a excel sheet to compare data of 2 columns. One column (or array), let's say C3:C13 contains "x" in some of its cells. The other column, let's say P3:P13, contains "d" in some of its cell. What I would like to do is compare the cells of the same row, see if they contain any data and return 1.

So if C3 contains an "x" and P3 contains a "d", therefore it returns 1. If C4 doesn't have an "x" and P4 has a "d", it will return a 0.

The closest I can get to this is the following formula

=SUM(IF(AND(C3="x",P3="d"),1,0), IF(AND(C4="x",P4="d"),1,0), IF(AND(C5="x",P5="d"),1,0), IF(AND(C6="x",P6="d"),1,0)), IF(AND(C7="x",P7="d"),1,0)), IF(AND(C8="x",P9="d"),1,0)), IF(AND(C6="x",P6="d"),1,0))...

However, this formula is way too long. Is there another way of writting or simplifying this formula?

View Replies!   View Related
Return ALL Matching Data From Table
I'm trying to create a function in VBA,

I have a table of data and need to create a function which requires value (string), range and column number. This will then look for the value within the range and return the data for every match of specified value within the table.

I'm happy for the return value to be in the form:


View Replies!   View Related
Pivot Table Chaos: Blank Cells Return 0, Empty Cells Return Nothing
Hi, I desperately need help with a pivot-table and can't find anyone else who's ever had this problem...I have a very large healthcare data table which for simplicity I will describe as follows. In essence the first two columns respectively are (A) location and (B) month. Let's say the third column (C) is the number of cases of the disease kidpox treated in each health centre during that month. The fourth column (D) is the total number of cases of everything treated during that month in each clinic. The fifth column (E) is the proportion of cases of this disease over all consultations for each health centre and month, and the formula in E2 is .....

View Replies!   View Related
Using The .find Method And Getting Adjacent Cell Data
Until now if I needed to find a cell's data (and its adjacent data) I've been using code in the format of (for the purpose of this example, you can assume all data in coulmn 1 is unique. Functioning as aprimary key using incremeting integers):

View Replies!   View Related
Loop Through Rows And Return Matching Columns
I have a worksheet with 2 columns. The first column contains names and the second column contains numbers associated with the name.

How can I specify a name, go through the sheet to find all the occurances of that name and then paste all the numbers associated with that name in another worksheet in a set position.

View Replies!   View Related
Return A Value Of Two Matching Cell Values From Another Sheet
I have two sheets - one work sheet and the second - database with existing entries. Going by visual example below, I need the column C of the work sheet to automatically populate with the data pulled from the database sheet. For example, C4 on the Work sheet should find both values "Bike" and "Green" in one row on Database sheet and return the corresponding value 44444 from F97. The work sheet cells in the row C should remain empty if no match found on the database sheet.

Sheet 1 (Work sheet)

Sheet 2 (Database)

View Replies!   View Related
Return Value By Multiple Matching And Unmatching Criteria
I am developing Spreadsheet that you will enter a list of parts that you need. it will have many columns but only 4 are vital to the check. this will be generated for each project.

With each part i want to then look up in another file that is a list of all the possible parts you can have with there cost. this file will be standard for everything and it will be updated from time to time.

now not all the criteria to look up will be exact matches.

here is an example

code temp/pres rating diameter material
GLV 4500 15 16Mo3

in the other file we will have multipu entries for GLV with different values.

code temp/pres rating diameter material Cost Reference
GLV 4500 20 16Mo3 400 aaa1
GLV 5500 15 16Mo3 350 aab1
GLV 5000 15 16Mo3 300 aab2
GLV 5000 15 13CrMo4-5 600 acb1
GLV 5500 15 13CrMo4-5 600 acb2

For Code i need it to match (there are lots of codes even including variations like GLV.)
For Temp/pres rating i need it to be equal or higher to the value
For diameter i need a match
for material i need a match.

so as you can see from the list above there are 2 options. so then i want it to return the cheapest.

that is step one.

step two is to repeat it for multiple list of parts.

View Replies!   View Related
Lookup Matching Values & Return Replacement
Im trying to work out how to write some code to find and replace from a list.

I have key data in column P on sheet 1, and a list on sheet 2 with the same key data in column C.

Basicially, every month the data on sheet 1 changes (there are usually 100 rows of data each month) and what i want to do is, write some code to look down column P on sheet 1 and for every cell, find the corrosponding value on sheet 2 (column C). When it finds the value, copy and paste it onto sheet 3 then delete the row from sheet 2.

I hve written some code that can do the first part (copy and paste) and a second macro to do the deleting....but it is only for 1 value at a time...

View Replies!   View Related
Return Matching Numbers By Comparing 2 Ranges
I have a collum (A )with numbers and in other sheet have a collum (B)with numbers too.. and some numbers match. what i want is in the cells that the numbers match have other colum and i want to copy that number to another cell.

View Replies!   View Related
Lookup Across Columns & Return Matching Detail
I am trying to track a score. A master capacity sheet has two columns with identifiers (upstream and downstream nodes) relative to a pipe segment. I have a separate sheet (condition sheet) with the corresponding scores. I want to enter the upstream and downstream node numbers in 2 columns (A & B) in the master capacity sheet, and based on the the upstream and downstream node numbers, have the corresponding score (from the condition sheet) on that row copied in the master capacity sheet.

View Replies!   View Related
Lookup/Return Non-Matching Data In Worksheets
I'm trying to compare 3 different worksheet in the same workbook and copying the unmatched values into a new worksheet. find the attached file. In the sample file, am comparing sheet1, sheet2 and sheet 3 with sheet1 as the base. the columns mite differ in their location but the column headers are same.. The difference, bolded cell, should be copied along with the header and the code, into a new file and has to be saved...

View Replies!   View Related
Copyright © 2005-08, All rights reserved