I want to find the maximum in column C if Column A = b but I don't want the number if it equals 11 or 9. So, the answer should be 7, but I don't know how to create the correct formula..I'm sure I have to nest a couple of things into an array, but I just can't seem to get it to work.
I need a macro that will search MIN and MAX columns and identify which horse has the maximum number in both the MIN and MAX columns an example is highlighted yellow in the attached spreadsheet. If there is a selection i want the macro to keep the horse that matches the criteria along with the race date and time e.t.c (header) but delete all other horses in that race. If there are no selections that meet the criteria in a race i want it to delete all details for that race including headers and go to the next race.
A B C Country Revenue Month 1 UK 10 Jan 2 France 20 Jan 3 US 30 Jan 4 UK 25 Feb 5 US 35 Feb 6 France 5 Jan
and so on...
So where country = UK, France or US I want to retrieve the MAX revenue from all months and which month it was in. Eg UK max revenue was in Feb of 25. I am not sure how to apply the max formula with criteria. Is there any way to do this?
Problem: Range A2:C10 contains the login and logout times of various ID's. Each ID could log in and out a number of times a day. How could we find the first time a specific ID logged in and the last time that same ID logged out?
Solution: For each of the ID's in range A2:A10, enter two Array Formulas. To find the first login time (Column B) enter the following formula: {=1/MAX((A14=$A$2:$A$10)*($B$2:$B$10 To find the last logout time (Column C) enter the following formula: {=MAX(($A$2:$A$10=A14)*($C$2:$C$10))}
I'm developing a spreadsheet for a nonprofit that provides feedback on their major fundraiser/auction. I'm trying to create a formula in a cell that will look at the bidder #'s in column B and add the value of the their purchased items found in column C and return the number of the bidder that has the largest total value of purchases.
This can be done with a pivot table and give a table of all bidders, their total amount paid for items, and the number of items purchased.
I have a file with telemetry data for n individuals. For each individual I have data on a number of days, over the course of a couple of years. On any given day, I have from 1 to several "fixes" for an individual. Fixes range from 1 to 3, with 3 being the "best". Note that I do not necessarily have data for all individuals on a given day. What I want to do is extract the row with best fix for each individual, on each day for which I have data for that individual. If there is more than one best fix for an individual on a given day, then I want to choose the first best fix (temporally). Right now my data is set up with columns:
INDV DATE TIME FIX ....other attributes
INDV = unique code identifying the individual
The data is sorted by INDV, then by DATE, then by TIME.
I figured I could do this using nested IF statements, where "TRUE" would be added to a new column (e.g., HIGHFIX) in the row of the first highest fix on each day for each individual, but have not been successful in doing this. I've also tried conditional formatting. Again, no success here.
I have no problems figuring out SUMIF or SUMPRODUCT with multiple criteria, but I'm trying to help someone with an issue that the second criteria is actually not all-inclusive.
Column B - Lots of numbers, the SUM range Column C - Yes and No flags. Y or N
C1 = maximum number of matching items to include.
So, =SUMPRODUCT((C2:C100="Y")*(B2:B100)) sums up ALL the Yes rows, but the guy wants to restrict it to the last X matches, and put that X factor in C1. So if C1=5, only the last 5 Y matches are included.
I was hoping that my formula would give me the count number based on the Maximum time (latest time) and the Name field...My result is a 0 instead of 62 (the correct answer).
Look in Column E and find the MAX value. Once you find the MAX value, (let's say E27) display the date that's in C27. I bet this is really easy but I've been screwing around with it for over a half hour and can't get the correct result.
I have two columns of data. The first column is the 'type' and the second column is the 'value'. I need to find the maximum 'value' for each individual 'type'
The 'types' are not necessarily next to each other and the data cannot be sorted to do so.
Example: type value A 15 B 6 A 21 C 7 B 13
I need to be able to say the MAX for 'A' is 21, the MAX for 'B' is 13 and the MAX for 'C' is 7.
How would i use a max and and if together? i have these scores with out or not out next to them and i want to know which score is the highest where the not out = yes?
In range A2:AAZ2 I have numbers but until the numbers are entered into, some cells in A2:AAZ2 shows #N/A. I want to calculate the maximum number in the range A2:AAZ2. My formula =IF(MAX(A2:AAZ2)>0,MAX(A2:AAZ2),"") always returns #N/A, instead of the maximum number.
I am trying to generate a column that shows which organic suites are needed for each site. I have attached a sample of my spreadsheet.
It is difficult to explain what I am looking for, so I have just put some bullet points down. Each suite required for each site Only 1 of each suite to be counted for each site This will show a total number of each suite needed
What I have so far seems like it is close, but it aways reads as 1 if something is in the row. I want it to read 1 if there is a 1 in either row for the same site and 0 if 1 is not present for either row for each site.
In a cell, I would like to limit the maximum upper limit. For instance, in a cell with (=H23*0.06), that value ranges from perhaps 1.48 up to 5.93; however, I would like for the upper limit to stop at 3.33. Would that be conditional formatting? How can I stop the upper limit at 3.33?
I am having an issue getting MAX to pull the largest number from a range of numbers calculate by formulas. The code I am using to figure these numbers is as follows:
In the attached excel sheet, i am trying to find conditional maximum of a set of numbers. In Cell C3, I have the formula =MAX(($S$4:$S$500=$W$4)*(M4:M500)) entered as array function and is working fine. In Cell J3, I have the similar formula MAX(($S$4:$S$500=$W$4)*(J4:J500)) entered as array function.. This is not working...always gives zero. The difference between Range (m4:m500) and (j4:j500) is that, m4:m500 are all positive numbers and j4:j500 are negative.
I am using the vlookup function for a reference that has two values. I want to choose the max. See attached file. In essence, I would like the vlookup for "a" to output "2" and "e" to output "7".
I wanted to know if there was a way to find the Maximum value given a number of conditions are satisfied.
Similar to COUNTIFS and AVERAGEIFS, where you state the data range to use, the condition's range, the condition, then the next condition's range, the next condition, etc....
I have a userform that captures 12 textboxes worth of numbers. I want to find which box has the max value(two or more could be equal, would want that info).
I wanted to do this without putting the values back into cells to do this. Is there an easy way? Or would that be the optimal way to do this?
Sorry for posting a related question earlier, where I forgot to specify something. I need to find the max in a column of data without doing any filtering or rearrangment of the column -- can this be done, either indicating the max across many columns by highlighting the max box with color or by writing its address in a new box in the bottom?
I encounter another problem. How can I set the function in textbox,so that,if the input number exceed the max. predifined value,it will not accepted?I did try on my own,but even I put the number lower than max value,the msgbox will still appear.
Private Sub txt_layer_Change() If IsNumeric(txt_layer.Value) > IsNumeric(txt_layerMax.Value) Then MsgBox "Input should not exceed max value" txt_layer = "8" End If End Sub
There a a total of 13 sheets. Sheets 1-12 are named by months i.e. Jan, Feb, Mar, etc.. Each of these sheets contains a max temp for the day. There are cells at the bottom of each of these sheets that return the max, min, and average. The last sheet is an annual summary sheet. It collects info from the other 12 sheets and places them on it. There is a cell on the annual summary sheet that attemps (this is my problem) to determine the max and min temp for the year (easy enough). The problem is that once the sheet determines the max and min temp for the year to determine what day of what month it occurred on.
I'm looking for a code that compares and plots the maximum value from the same cell in many different worksheets. Say for example that I want the code to plot the maximum value from cell B2 in sheet 2, sheet 3 and sheet 4 in cell B2 in sheet 1.
I have a column of merged cells which contains a number e.g. 396322669097172 and a time e.g. 00:00:00.
I can format this combined cell as a 'general', but think it can be formatted as any type of cell retaining this layout (after combination, prior I had to format both cells as textual), however when it is then not possible to get a maximum value from this column using a pivot table. The max comes back as zero.
I have tried using some freeware to combine the cells and I don't know what it did differently but I was able to order the values using a pivot table afterwards.