I have a userform that captures 12 textboxes worth of numbers. I want to find which box has the max value(two or more could be equal, would want that info).
I wanted to do this without putting the values back into cells to do this. Is there an easy way? Or would that be the optimal way to do this?
I encounter another problem. How can I set the function in textbox,so that,if the input number exceed the max. predifined value,it will not accepted?I did try on my own,but even I put the number lower than max value,the msgbox will still appear.
Private Sub txt_layer_Change()
If IsNumeric(txt_layer.Value) > IsNumeric(txt_layerMax.Value) Then
MsgBox "Input should not exceed max value"
txt_layer = "8"
End If
End Sub
I was hoping that my formula would give me the count number based on the Maximum time (latest time) and the Name field...My result is a 0 instead of 62 (the correct answer).
=SUM((Download!$H$2:$H$10=A4)*(Download!$D$2:$D$10=MAX(IF(Download!$H$2:$H$10=$A4,Download!$D$2:$D$1 0)))*Download!$I$2:$I$10)
Would a Index/Match/MAX function be more efficient?
Look in Column E and find the MAX value. Once you find the MAX value, (let's say E27) display the date that's in C27. I bet this is really easy but I've been screwing around with it for over a half hour and can't get the correct result.
View 2 Replies View RelatedI have two columns of data. The first column is the 'type' and the second column is the 'value'. I need to find the maximum 'value' for each individual 'type'
The 'types' are not necessarily next to each other and the data cannot be sorted to do so.
Example:
type value
A 15
B 6
A 21
C 7
B 13
I need to be able to say the MAX for 'A' is 21, the MAX for 'B' is 13 and the MAX for 'C' is 7.
I am attempting to format some TextBoxes from within a For/Next loop. I need a way to check which TextBox is the active TextBox in the loop. Using i as the variable, I came up with this code snippet: Me.Controls("TB" & i).Text = Format("TB" & i, "mm/dd/yy")
If i = 3, this gives me in TextBox3 (which is called TB3) the text 'TB3' and not the value of what is in TB3. It has got to bo something simple, I just can't see it!!!
Is there a way without using code to have the text in a text box (excel 2003), copied to another cell or another text box on a different worksheet?
I have information in a text box on 1 worksheet. I would like this information to automatically be copied to another worksheet. On the master sheet, if any of the information gets changed or updated, the copied information should get updated as well.
I've been using the following code to conditionally format userform textboxes based on a specific value (in this case 2490):
[Code] ........
What I'm looking to do now is amend this so rather than use a specific value, to use the value in a specific textbox on the same userform.
I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.
I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.
I need the value of active x control textbox on my worksheet 1, to be copied to a textbox in my userform, that pops up from that sheet....
And I want it to display after the textbox on my worksheet has been updated and the comman button for the userform is clicked...
In Excel VBA Userform, how to copy the text from textbox automatically when the cursor is being moved from the textbox. And when i put CTRL+V then the copyed text has to be pasted.
View 5 Replies View RelatedCode:
Private Sub cmdSearchButton_Click()
Dim txtbox As String 'stores lookup value
Dim x As Variant 'value for wwid txt box
Dim ForeName As String
Dim SurName As String
Dim wwid As Variant
Dim iPosition As Integer
[Code] .......
Here is my code, it does a vlookup and if the persons name is not found it will split the text entered into forename and surname but when i try and add
Code:
frmAdd.txtForename.Text = "&ForeName &"
frmAdd.txtSurname.Text = "&SureName &"
It actually displays &ForeName & in the text box of the next from rather than what ForeName is..
eg. John Smith -> search button -> user not found msg -> user wants to add user -> string is split into forename and surname -> forename = John , surname = Smith -> display this in the second form.
What code should i be using to do this, i thought that &ForeName & would work.
Looking for a macro to insert a textbox with the textbox containing a formula rather then text.
Sub AddTextBox()
ActiveSheet.Shapes.AddTextBox(msoTextOrientationHorizontal, 2.5, 1.5, _
116, 145).Name = "Textbox1"
ActiveSheet.Shapes(1).Select
Selection.Formula = "=Manpower!R[3]C[1]"
End Sub
I tried this but I cant get the formula portion to work... I just want to insert a macro with that formula....
I have a form that has three fields (1. Comments (TEXT), 2. Legacy_Comments (TEXT), 3, Comment date (DATE))
Now my users need to keep adding comments to the comment text box, and when they do it automatically adds the date they entered the comment in the Comment date box. Now my problem is that since they keep adding comments to the comment box, I need to keep track of these comments in the Legacy_Comments (Text box).
For example, the First time a user enters a comment into the (1) comment text box it auto populates the date in the comment date box, and then adds the comment and date to the Legacy_Comment box. the end result is (comment,4/3/2014 now lets say a user needs to add a comment to the comments box tomorrow - I want the legacy_Comment box to then read (comment, 4/3/2014; comment2, 4/4/2014, ...., comment(n),date(n)) OR it can be vice-verse, because I just need to keep track of the comments, I am not worried if the new comments are before or after older (yesterdays / the day before yesterdays comments)
How can I write a VBA code that will always add the new comment to the legacy_comment field, without deleting the comments that were entered previously?
Code:
If isnull(me.comment.value) Then
Exit Sub
ElseIf me.comment.value = true Then
me.comment_date.value = date
me.legacy_comment.value = me.comment.value & "," & me.comment_date.value & ";"
me.legacy_comment.value = me.legacy_comment.value & "," & me.comment_date.value & ";"
It adds the comment only the first time, but it does not concatenate the string from yesterday to the string to today. I do not care which order the comments are, meaning if I added a comment today it can be before OR after the comment from yesterday.
I tried looking for everywhere, but i still cant seem to find the solution.. I have an Active X textbox on a worksheet, and I need it's value to show up on a textbox on my userform, that shows up through a command button on that worksheet. I'm fairly new to vba.
View 1 Replies View RelatedI have a two-page multipage form. I have a textbox on page 1 (txtOccupantLoad), and I want to pass the value from that textbox to another textbox (txtOccLoad_L1) on page 2. The code I've tried so far looks like this:
Private Sub cmbChooseLevel_Change()
If Me.cmbChooseLevel.Value = "Level 1" Then
Me.txtOccLoad_L1.Value = Me.txtOccupantLoad.Value
End If
End Sub
What I'm trying to do is to use the same form for 10 different levels (floors) of a building. Then on page 2, I'll itemize the values for each floor. So the combobox determines which floor the calculations are for; txtOccupantLoad is the total of all incremental occupant loads on that floor; and txtOccLoad_L1 is the first of a series of textboxes on page 2 where the value for Level 1 should go. If the combo box shows "Level 2" then I'll write new code for the txtOccLoad_L2, and so on. I've also tried including "page1." and "page2." after "me."
I am trying to create a user form that has a series of text boxes that will all have a VLOOKUP function in them based off of input from a the first text box. If I can just get the code for the first one, I think I can figure out the rest. We will say that the file that the user form is contained in is 'Agent Administration' and the file that I want the VLOOKUP to pull from is called ' Roster for Auto Population'.
View 7 Replies View RelatedI have attached my file.
When the Go button in text box in the 'VSVA-1 Data' tab is pressed, a new tab is created. I would like the tab to be renamed after the text that is entered into the text box. Is this possible? Here is what I have so far.
VB:
Sub RenameTab()
'Renames the worksheet tab
ActiveWorkbook.Sheets("VSVA-1 Data").Select
tabName = TextBox1
ActiveWorkbook.Sheets("VSVA Data").Select
Selection.Name = tabName
End Sub
I am trying to copy data from a Textbox in a Userform to a Textbox in another Userform. Is it possible?
In Userform1 I have a button from which I can open Userform2 keeping the Userform1 opened. When closing Userform2 I want to copy the data from TextBox2 in Userform2 to TextBox1 in Userform1.
I was trying to guess the code... but it is not working...:
UserForms("Userform1").TextBox1.Value = UserForms("Userform2").TextBox2.Value
How would i use a max and and if together? i have these scores with out or not out next to them and i want to know which score is the highest where the not out = yes?
View 4 Replies View RelatedIn range A2:AAZ2 I have numbers but until the numbers are entered into, some cells in A2:AAZ2 shows #N/A.
I want to calculate the maximum number in the range A2:AAZ2.
My formula
=IF(MAX(A2:AAZ2)>0,MAX(A2:AAZ2),"") always returns #N/A, instead of the maximum number.
I'm having trouble referencing a value entered in one textbox to another textbox.
View 2 Replies View RelatedI am trying to generate a column that shows which organic suites are needed for each site. I have attached a sample of my spreadsheet.
It is difficult to explain what I am looking for, so I have just put some bullet points down.
Each suite required for each site
Only 1 of each suite to be counted for each site
This will show a total number of each suite needed
What I have so far seems like it is close, but it aways reads as 1 if something is in the row. I want it to read 1 if there is a 1 in either row for the same site and 0 if 1 is not present for either row for each site.
In a cell, I would like to limit the maximum upper limit. For instance, in a cell with (=H23*0.06), that value ranges from perhaps 1.48 up to 5.93; however, I would like for the upper limit to stop at 3.33. Would that be conditional formatting? How can I stop the upper limit at 3.33?
View 2 Replies View RelatedI am having an issue getting MAX to pull the largest number from a range of numbers calculate by formulas. The code I am using to figure these numbers is as follows:
View 4 Replies View RelatedI am working on the report where is have diffferent Inst Numbers (Column "C") and also Frame (Column "D").
Now i need to know the maximum Frames in (Column "F") for Instrument Number. I used below formulae but it takes much time get the output.
={max(if(C:C=C2,B:B))}
So i need easier way thru VBA Code where it automatically pulls the MAx Frames with the specified criteria.
In the attached excel sheet, i am trying to find conditional maximum of a set of numbers. In Cell C3, I have the formula =MAX(($S$4:$S$500=$W$4)*(M4:M500)) entered as array function and is working fine. In Cell J3, I have the similar formula MAX(($S$4:$S$500=$W$4)*(J4:J500)) entered as array function.. This is not working...always gives zero. The difference between Range (m4:m500) and (j4:j500) is that, m4:m500 are all positive numbers and j4:j500 are negative.
View 12 Replies View RelatedI am using the vlookup function for a reference that has two values. I want to choose the max. See attached file. In essence, I would like the vlookup for "a" to output "2" and "e" to output "7".
View 2 Replies View RelatedI wanted to know if there was a way to find the Maximum value given a number of conditions are satisfied.
Similar to COUNTIFS and AVERAGEIFS, where you state the data range to use, the condition's range, the condition, then the next condition's range, the next condition, etc....
I need a formula for Excel
I want column J2 to L2 to display the highest amount on colum M2 and add 2 to it.
I've tried some IF formula.