Merge Rows Into Columns With More Than One Variable
Nov 12, 2007
I have been scanning web forums for days and have not found a solution to my question. I have found similar, but unfortunately am not clever enough with Excel VBA to adapt.
I have two columns of data which I want merged into rows (a) by survey number and (b) by time slots. The data I have is similar to:
Survey No.....Results
12345...........9am-12pm
12345...........3pm-6pm
12345...........No answer
56789...........6am-9am
56789...........12pm-3pm
56789...........6pm-8pm
56789...........10pm-12am
.....................
View 12 Replies
ADVERTISEMENT
Jul 28, 2008
to prepare an excel spreadsheet for a mailmerge but as all of the info for 1 recipient needs to be in columns instead of rows. I need to convert 2 columns' data into columns but only when there are duplicate invoices, see below;
View 9 Replies
View Related
May 11, 2014
We are doing a graduation project on an international airport, consist of scheduling flights on check-in counters automatically.
long story short, we ended up with an excel sheet like this: Screen_Shot_2014-05-11_at_4.png
Were y-axis are the check-in counters and x-axis is the timeline horizon (cell per 5-minutes)
I will do a VLOOKUP, to change each flight number to it's ID from an other sheet.
But the problem is that i want to AUTO-MERGE all cells with same value, because they represent one flight! and if i shortened the column width i can't see anything.
I want it to be like this: (i've done this manually, and it's VERY time consuming with errors because we have to do it for all days.)
Screen_Shot_2014-05-11_at_46FDQO.png
I googled for days, i only found Visual basic commands i guess? that only merge same rows. and they were poorly made. beside that it didn't work properly. Method to do it automatically?
EXCEL 2013
View 3 Replies
View Related
May 11, 2014
We are doing a graduation project on an international airport, consist of scheduling flights on check-in counters automatically.
Excel sheet like this:
Were y-axis are the check-in counters and x-axis is the timeline horizon (cell per 5-minutes)
I will do a VLOOKUP, to change each flight number to it's ID from an other sheet.
But the problem is that i want to AUTO-MERGE all cells with same value, because they represent one flight! and if i shortened the column width i can't see anything.
I want it to be like this: (i've done this manually, and it's VERY time consuming with errors because we have to do it for all days.) Any method to do it automatically?
EXCEL 2013
View 3 Replies
View Related
Sep 1, 2008
After sorting and filtering rows with in a set range I will have several rows that are almost duplicates. This is normal and expected due to how the workbook is used. Among these rows also will be several single rows that are not duplicates. It is important that I combine any two duplicates into one row. Example:
CREATE TABLES LIKE BELOW?
ABC D E F G H I J K
1 NameA 0XX15930777PS101300PS9
2 NameA0XX15930777PS91200PS10
3 NameX1159XXP555FBX1545PS9
4 NameB0A1234P123PS101263PS9
5 NameB1A1234P123PS90512PS10
What I need is this end result:
CREATE TABLES LIKE BELOW?
ABC D E F G H I J K
1 NameA 0XX15930777PS91200PS10PS101300PS9
2 NameX1159XXP555FBX1545PS9
3 NameB1A1234P123PS90512PS10PS101263PS9
It’s important that the data in each column stay with in that same column. Also of course it needs to be on the same row with the same person (NameA and NameB). The Columns that would determine if it’s a duplicate are D and E –. I would need this to be preformed via macro or some easy way so that others will not have a hard time. It will be on a protected Shared Workbook with Excel 2003. I've enclosed a Sample. How can I sort these or accomplish this and maintain the data where it needs to be?
View 5 Replies
View Related
Apr 12, 2012
Our company gets excel spreedsheets with UPC numbers. The numbers are divided in parts or columns. Sometimes it's in 2 columns; sometimes in 3; and sometimes in 4 like this:
A_____B_____C____D
023__14444__779__9
023__14442__789__7
I'd like to be able to concatenate the digits and have the entire UPC number appear in a blank column to the immediate right and go straight down the line and calculate them all. I figured out how to do this with separate macros for 2, 3, and 4 digits or columns.
Sub Combine_2_Part_UPC()
Do While ActiveCell ""
ActiveCell.Offset(0, 1).FormulaR1C1 = ActiveCell.Offset(0, -1) & ActiveCell.Offset(0, 0)
ActiveCell.Offset(1, 0).Select
Loop
End Sub
Is there a way I could do this with just one macro, by maybe selecting the digits of the first UPC number in the first row of the data to cue the macro in as to how many columns to process?
(The UPCs are in the midst of a lol of other data like product cost, so a macro probably wouldn't be able to figure out how many to calculate on its own.)
View 2 Replies
View Related
Feb 25, 2013
I'm trying to come up with code that will allow me to take numbers arrayed as follows:
25
25
42
42
[Code]....
The number of rows and columns are both variable.
View 3 Replies
View Related
Jul 23, 2012
I have a sheet with a company name in column A, and a list of comma separated values in column B. I can easily convert column B to multiple columns with the Text to Columns function, but then I'd like to insert each individual value in a new row in column B.
So, at the moment I have data that looks like this:
Company A
Value 1, Value 2, Value 3, Value 4, Value 5
Company B
Company C
Value 1, Value 2, Value 3
[Code].....
View 6 Replies
View Related
Jul 15, 2009
1. Remove J,K,N,A Columns,
2. In the last O (TIMESTAMP) column, the date is 14-Jul-09 format change it to 07/14/2009 (this format mm/dd/yyy
3.Filter L column (VAL_INLAKH) Remove all rows from whole sheet which has 0 value
4. Column C (EXPIRY_DT) date format is 24-Sep-09 , "dd-Sep-09" change to "Sep" only
5.Merge Column B,C,D,E (SYMBOL.EXPIRY_DT.STRIKE_PR.OPTION_TYP
respectively )
View 3 Replies
View Related
Sep 19, 2009
Here’s an example of my data:
A B
1110AAAAAAA
2220BBBBBBBB
3330CCCCCCCC
4330DDDDDDD
5330EEEEEEEEE
6440FFFFFFFFF
7440GGGGGGG
8550HHHHHHH
I need your help to figure out how to merge the above data to look like this in new blank worksheet using a VBA macro:
A B
1110AAAAAAA
2220BBBBBBBB
3330CCCCCCCC
DDDDDDD
EEEEEEEE
4440FFFFFFFFF
GGGGGGG
5550HHHHHHH
View 10 Replies
View Related
Oct 7, 2009
Does anyone have a VB macro that will copy information from a cell (this will be variable based on criteria) and paste it into the middle of another cell that contains HTML code?
The criteria for the copy/insert/paste is that the information in the cell that is to be copy/inserted must match up with the correct number (part number).
I hope this makes sense. I have attached an example spreadsheet. (Pictures are worth 1000 words. ) Hope someone can help. I checked this site and couldn't find anything that was solved that matched the specifics.
View 6 Replies
View Related
Jun 27, 2014
I need a macro that will create a sheet at the end of the workbook.
Sum data from a variable amount of sheets and display that data on the created sheet.
Here is a step by step:
Starting on sheet 5.
Column D has a variable amount of part numbers in it. These part numbers would be different between the ascending sheets.
Column T, U, V has an inputed number in it that would need added up across all duplicate part numbers in all the sheets.
(Note: The data would also need started on row 4. Everything above row 4 is headers)
Here is a small example:
D E T U V
13019090W Part A1
68705500 Part B1
64202900 Part C-11
59634600 Part D1
26005300W Part E1
I need the macro to start with sheet #5(starting on row 4). Check to see if there is data in column T, U or V. If there is, to create a new sheet at the end. And copy the entire line into that sheet (starting on row 4).
After that, to check every sheet after (excluding the newly created one, starting on row 4) for data in Column T, U and V. And then check for duplicates in Column D on the newly created sheet. If there is a duplicate to add/subtract that number in Column T, U and V to the SUM in column T, U and V in the newly created sheet. If there is no duplicate, to copy the entire line to the new sheet.
So that when finished. On the new sheet, you have the SUM of T, U and V for everything that has data in T, U or V for all of the previous sheets, plus the entire line of the first instance (excluding the first 4 sheets).
View 2 Replies
View Related
Aug 8, 2009
On the attached Excel file, I have code that will insert a variable number of rows and copy and paste from and to variable positions. That all works fine when run from a command button, but when I try to run it from the Worksheet_Calculate by entering 1 in J1 or K1 (inrange cell is J1+K1 for testing purposes) the CommandButton1_Click sub runs continously until an error occurs.
View 4 Replies
View Related
Mar 31, 2014
I have two columns, which have different length and in which there can be three types of data:
The data also in the first and the second column, so it is an old data.Second is, that the data is in the first column, but not in the second, so it is old, but it was solved.The third type is, when the data is in the second column, but not iin the first, so it is new data.
My task is to regularly update the list (so I have to merge the new and old columns), to see in which conditions the data is, but not to delete any of them (only the recurring, so if it is old, then it must not be listed two times).
View 1 Replies
View Related
Feb 7, 2009
I have a need to get the data from columns A and B and transfer to C but one line from A and second line from B and this successively until the end of A and B. They will have the same number of lines.
View 3 Replies
View Related
Jan 26, 2013
How I can merge two columns together and keep the data in both columns?
I have an address issue when the data was converted to excel it put the numbers part of the address in column "C" and the street name in column "D".
View 2 Replies
View Related
Sep 12, 2008
i am trying to create a macro that merges two columns in excel.
View 9 Replies
View Related
Feb 15, 2014
I'm currently working with the "Original"sheet shown on the attached file. From this, you will see that there is generic information contained in columns A:D then columns containing a month date and the associated FTE figure.
What I'm trying to do is as follows:
-Insert two columns after the "Investment Role" column, with column headers of "Period" and "FTE"
-Then, for each month column for each record, create a new row one under the other, copy the values in columns A:D and paste them into the newly created row,
-Then move the Date value for each month and the associated FTE figure and put these in the "Period" and "FTE"columns.
I've attached a file showing the 'Original' dataset and 'Desired Outcome' to look at.
Although the values in all of the fields may change month on month, and the number of rows may change, the number of columns will remain the same.
Merge Columns Test.xls‎
View 5 Replies
View Related
Jul 9, 2009
I'd like to perform a merge of value between columns D and E.
So if D9's value = 2 and E9's value = 15
then the result will be
E9=215
I've tried the following but I haven't gotten it to work.
View 7 Replies
View Related
Jul 23, 2014
I have two columns that are the same field, both Middle Name. The first column does not have every single row filled and the second column has every row the first column does not have and vice versa. I want to merge them to one filled column.
View 2 Replies
View Related
Aug 14, 2009
I have a worksheet with 10000 plus entries in ten columns From K to T. I wish to have a macro with Concatenate function to merge certain Columns from these ten columns, in one column with help of input boxes which may ask inputs, about range (from and to ), and number of digits to concatenate in the required column. I use Excel 2003 XP in work but an example is 2007 attached.
View 5 Replies
View Related
Dec 19, 2012
So I have several columns of data that have a location and then some numbers after it in additional columns. I need to be able to sort it so that all locations that are in both location columns are sorted first, and then any locations that are in one column but not the other column follows. Also the data associated with each column that follows the location needs to remain next to the location. Many times the columns will be of highly disportionate lengths too.
I've attached an HTML table so you can get an idea of what I am looking at, except what I'm dealing with is like.... hundreds of cells long.
I want to be able to turn this:
HTML Code:Â
<table border="1" bordercolor="#FFCC00" style="background-color:#FFFFCC" width="100%" cellpadding="3" cellspacing="3">
<tr>
<td>A</td>
[Code].....
And in this 6 row example, I'd actually only be interested in the 4 letters that were in both columns. If it makes it easier, I would be okay with discarding the last rows, but would rather just have them sorted at the end, so I could check if....for example there were two different spellings of the same thing, and they should actually be included.
View 3 Replies
View Related
Nov 14, 2008
I've got two columns:
A, B
abc, def
qwe, rty
asd, fgh
zxc, vbn
And I need to bring these together in one column so it looks like this
C
abcdef
qwerty
asdfgh
zxcvbn
View 2 Replies
View Related
Nov 18, 2011
My issue is I want to use a for loop to go through a spreadsheet. Within the for loop if a certain condition is true I want it to select all columns from A to AW and merge them together.
Example of what I have so far:
Sub MergeHeaders
dim i as Intger, LastRow as Integer
LastRow = Cells(Rows.Count, "CP").End(xlUp).Row
For i = 1 to LastRow
'Check if the leading character is a letter, not number
If Asc(Cells(i, "AP")) > 64 Then
'I want select from A to AW only for current row i, then merge
end If
next i
end sub
View 1 Replies
View Related
Jun 7, 2012
I use the following code to merge all data a "master sheet", but I want to take the data and put it next to each other on the "master sheet", not under. For example, my range of data is "A1:D15" and I want to copy from all sheets. So my first paste would be A1:D15, then the next should be E1:H15.
I would like the code to find the used range, like it does currently.
Code:
Sub Merge()
Dim ws As Worksheet
ActiveSheet.UsedRange.Offset(0).Clear
[Code]....
View 1 Replies
View Related
Sep 27, 2013
I've found macro, which merge rows with the same data
Example:
BEFORE:
january
1st
january
2nd
[Code] ........
Macro:
Option Explicit
Sub MergeSame()
Dim r As Range, c As Range
Dim i As Long, j As Long
Set r = Range("a1", Cells(Rows.Count, "a").End(xlUp))
[Code] .....
But i need use the same procedure for columns, it means:
BEFORE
A
B
C
D
E
F
january
january
january
february
february
february
AFTER
A
B
C
D
E
F
january
february
I've tried modified macro marked above, but without success...
View 3 Replies
View Related
Oct 26, 2013
I have 13 different worksheets with the same header columns, i would like to merge into one creating new work sheet. All the data in column A should keep on adding on the column A from all the worksheet and from column N going across. I have more than million records on each sheet
I have dropped the file on [URL]... for example
View 8 Replies
View Related
Dec 5, 2009
I use CAD software that generates Bills Of Material. I cut & paste these to an Excel template that has column headers in row 3, for example:
U3 = Item name
V3 = Manufacturer
W3 = Reference_item_name
X3 = Reference_item_ID
Starting from row 4, I would like to add the content of columns V, W and X to column U, separated by comma's. No superfluous comma's should be added when columns are empty. It would be nice to have a macro that uses the row 3 column names, so it still works if someone changes the column order.
View 9 Replies
View Related
Aug 7, 2008
i have a table looking something like this
----A--------------B---------------C----------------D-------------
1---Destination-----Country_Code---Area_Code------ Price_Per_Minute
2---Armenia--------99--------------58, 59, 566------0.098
3---Jordan---------96-------------79,78,77,2--------1.023
4---UK-------------44-------------------------------0.50
5---UK-------------44-------------79,78-------------0.48
what i actually need is to turn this table into 3 columns table, the first column is the destination, the second one is the destination code which consists of the concatenation of the country_code and the area_code columns, and the third column will be the price_per_minute, the main problem is that the Area Code column contains many values and each value should be attached to the country_code and then i need to create more rows for each country, so the my table should look like this:
----A--------------B---------------D-------------
1---Destination----Code-------Price_Per_Minute
2---Armenia-------9958-------0.098
3---Armenia-------9959-------0.098
4---Armenia-------99556------0.098
5---Jordan--------9679-------1.023
6---Jordan--------9678-------1.023
7---Jordan--------9677-------1.023
8---Jordan--------962--------1.023
9---UK------------44----------0.50
10--UK------------4479-------0.48
11--UK------------4478-------0.48
View 5 Replies
View Related
Jan 10, 2012
I have dates values in 3 columns.
A1 - Header - "Holidays in XXXX'
B1 - Header - "Holidays in YYYY'
C1 - Header - "Leaves by YOU"
A2:B11 have static dates consisting of 10 dates in each column.
C2:C11 - the user may enter any date at any point of time.
I would like to auto-merge the dates in all the 3 columns (A2:C11) in a single column say D2:D31 and then the system should auto-sort the column based on dates in any one order. So as soon as the user enters a value in say cell C2, all the 10+10+1 dates should get sorted.
Also the constraint here is a user may not apply all 10 leaves at in a year. So many of the cells may have blank values.
View 1 Replies
View Related
