Merge Same Cell In All Files/Workbooks In Folder
Jun 6, 2008
I have a folder named DATAENTRY (consist 90-100 password protected files & it may increase whenever the need arises).
I need to merge A2 to (data in last available row & last available column) of each file in that folder into a single sheet named MERGEDDATA of file named MASTER.XLS.
I got one excellent code to unlock/lock the files automatically without opening the concerned files. This is the Link [url]
& the Code is: ...
View 5 Replies
ADVERTISEMENT
Nov 14, 2009
If i have 25 different workbooks in one folder is it possible to open/merge all 25 workbooks into one workbook without having to copy and paste each individual workbook.
Each workbook only has a sheet1. I hope there is it would save a lot of time
View 9 Replies
View Related
Apr 27, 2007
I have 51 workbooks that I would like to combine into one workbook. Each workbook varies in number of rows, but have the same number of columns. There are 31 Columns (AE).
Is there a fast way of doing this or will I have to cut and Paste?
View 6 Replies
View Related
Dec 21, 2009
I haven't really been able to find a total solution to an issue I have had for a while and hope someone can help.
I have a series of workbooks that I create from Crystal reports, I want to do the following after clicking a button on a form:-Open up two files in a folder with similar names (IL-BA, IL-BA-19), both have the same headers
Open a Third file, this is my 'Master File' and is in a different location, this has the same headers
Copy from the two files onto 1 sheet on my master file (excluding the headers)
Close the first two files without saving and move them to a 'Done' folder
Save and Close the Master File
Move onto the next set of files in the folder (NE - BA,NE - BA - 19) and do the same again, until all the files in the folder have been completed.
All the files in the folder have different data, so have different headers, but the Master file for each set will always have the same headers, (if that makes sense), but they are specifically named, so cycling through the named files in the folder, merging the two together.
My main problem is that I can't seem to find all the code i need, i can merge the two files, either in different sheets(which i don't want), or with the headers for each file still attached (as i can't seem to find a robust way of removing them).
View 9 Replies
View Related
Feb 13, 2009
I have several workbooks in a folder with sub folders. How can I get the values located in C6,
E6 and E9 and put in a new workbook the "file name" in Ai and those 3 values in Bi, Ci and Di
respectively? It´d be desirable get the values without open the files.
something like:
------A-----------B---------C----------D
Filename1.xls---13:11------13:57-----00:46
Filename2.xls---17:42------18:03-----00:21
.
.
View 9 Replies
View Related
Aug 19, 2009
Is there any code that can look at all the workbooks in a folder and add up the certain cell values? All the workbook's titles will change through time but all the workbooks only use sheet1.
Example: I want to add up cell Q45 from all the workbooks that exist in the windows folder. Is there vba code for this?
View 9 Replies
View Related
Mar 25, 2008
I have two hundred workbooks in a folder located at "C:ozgrid". I'm trying to extract the information in cell B9 in each of these workbooks and input them into a new workbook starting in cell A1 and continue on down through cell A200. Each workbook name begins with "Summary" and has the format of "Summary XXXXXX.xls".
View 2 Replies
View Related
Apr 21, 2014
I have up to 50 workbooks in one folder with data in a specific range. I also have one workbook which includes additional data, including conditional formatting and dropdowns. I need to copy the desired range from the first workbook in the source folder to the second workbook, then save the latter to my destination folder, using the same name as the first. I need to repeat this process for all workbooks in the source folder.
View 2 Replies
View Related
Mar 15, 2013
I need a macro in a workbook to look at all the files in the same folder that have "*att*.xls" in the name and determine and copy from the range A15:W515 only the rows that have data in at least columns A, C and D. Each file will vary as to how many rows there will be and there are more than the files with "*att*.xls" in the folder. The data will be on the only worksheet in each file and the worksheet is named "G2WAttendee_xls" the data from all the files need to be copied to the file called "Consolidated webinar reports.xls" (I am using Excel 2003) and to a sheet called "Attendance Data" and added to the end of the last paste.
At the start of the macro the current file "Consolidated webinar report.xls" should be saved to a sub folder of the current directory and have the date saved added to the name. The sub folder is called "Completed reports". The data in the original file on worksheet "Attendance Data" should be deleted.
At the end of the process all the files that have had data copied from them should be moved to the sub folder "Attendance reports consolidated" (This could be done as each file is closed if that is easier).
I have headings in row 1 of the "Attendance Data" worksheet that match the headings in the various files in the folder (which will always be in row 14 of the individual "*att*.xls" files).
The folder with all the files and the "Consolidated webinar report.xls" file is at path "Z:P and S MEvaluationsWebinar series 2012-13TB".
View 9 Replies
View Related
Aug 20, 2006
I did a search for " import text" and found some promising leads, but not exactly what I was looking for. I have tried running macros and looking at the code but don't know how to pass the file names from the the D47:D147 range to VBA(see below). I saw elsewhere that Excel can be told to create a temporary batch file, and that the batch file with the command "copy text1.txt+text2.txt+text3.txt all.txt" for example could be used to merge the 3 text files into a file called all.txt. I don't however know how specify the path where copy starts, to tell the batch file to look in subdirectories or to pass the file into Excel. I've posted this question yesterday to Yahoo Answers http://tinyurl.com/omers and http://tinyurl.com/rfww9 without much luck.
Below is the macro I would like:I have text files whose names are found in the range D47:D147 although without the appended ".txt" extension. The sheets can only contain one name sometimes, but on average 8 to 10, so in the average case only cells D47:D56 would have entries.The text files are found in the say H:Textfiles directory or subdirectories.I would like Excel to find these files, concatenate them with a row between each file, and paste the results into cell K251.Finally, the text import wizard should be used with a space as a delimiter and the last 3 columns (it's sometimes only 2) of the concatenated file, not imported.
View 2 Replies
View Related
Sep 30, 2008
I would like to know how to open multiple excel files from a folder based on the information based in cells down a certain column until the last cell.
I thought it might be something like this but it isn't: ....
View 6 Replies
View Related
Mar 14, 2008
Essentially, the Engineering Dept has given me 550 AutoCad files I have dumped into a folder located in this path: C:/DrawingsDump
From these 550 DWG files I need to manually filter and separate 260 drawings that I actually need to use and move them to a folder located in this path: C:/DrawingsFiltered . This manual filtering process takes a lot of time and is tedious work and it has got to be done everytime Engineering changes drawings because they are not kind enough to provide me a delta list.
In Excel 2003 I have setup a list of all 260 drawings I am interested in and that I call my filtered list. Is it possible to create a script that will enable Excel 2003 to compare my filtered list to all of the files inside C:/DrawingsDump, and then copy only those files that match to my Excel Filtered list and then paste only matching files into the C:/DrawingsFiltered folder?
If Excel 2003 can't handle this, is there a third party application that will let me perform a file management function like this with minimum startup time?
View 3 Replies
View Related
Jul 5, 2007
I want to allow users to place files (.jpg, .tif, .pdf, .pps etc) into a network folder and then have my program open each file and display it for 30 seconds then close the file and the application before opening the next file.
1. Set up a loop to get a directory listing of the folder and write the listing to a text file.
2. Open up the text file and get the next filename in it
3. Open the file in the associated application
4. Wait for 30 seconds (or some period of time) and then close the file
5. Repeat steps 2-4
DoIt = 1
While DoIt = 1
Open "C:TempList.txt" for output as #1
Print #1, Files In Folder
Close #1
Open "C:TempList.txt" for input as #2
while not eof(2)
Line input #2, MyFile
Display MyFile on screen
Wait for 30 seconds
Close MyFile and MyApplication that opened it
wend
Close #2
I can get the directory listing just fine with no problems
I can open the files in the associated application just fine with no problems.
with closing the application after 30 seconds or some period of time.
I need some code that will allow me to easily send it a filename and it will know how to close the file and the application that opened it.
View 9 Replies
View Related
Feb 8, 2009
I have an Excel application (Excel 2003) which is stored in the default Program Files folder by the Installer; for example: c:program fileszxchello.xls. The problem I am running into is this file opens as Read Only in Vista and this is interfering with the running of the application. There is no problem opening the file normally in Windows XP.
I have been able to narrow down the cause of this to the User Account Control system in Vista - if I turn OFF User Account Control, the Excel file opens normally and my application functions normally. Is there another option to open the Excel file without turning OFF User Account Control because some users may find it unacceptable to turn OFF this security feature. Ofcourse, one option is to install the application in another location, outside the Program Folder, and the file would open normally, but the Packaging Wizard that I am using to package the application does not allow me to install the application in any other location and thus, the application installs in the Program Folder and I am running into this problem of the Exel file opening as Read Only. Is there a way out of this situation where I can open the file normally (not as Read Only)?
View 5 Replies
View Related
Feb 13, 2014
I have a macro that searches in all the excel files contained in a folder (weather files are opened or not) and returns the information (File name, Sheet name , Cell Address, and contents of the cell). I just want to amend the said code so that it copies not just the cell alone but" the entire row in which the cell is present".
My code is as follows
[Code] ......
View 4 Replies
View Related
Apr 8, 2014
I is it possible to convert all comma separated text files in a single folder in to excel files. But the requirement is to have 2 sheets in each new file. first to be the full file - with all columns, and in the second sheet to keep only colum A B D G H K L M O P R S T V W from the first sheet. The second sheet name must be the same as the first one but without the first "wlist_" in the name.
One more thing. The third column in the second is called "COUL". there are short letters for colors in french
can they be converted with the sort in English like it goes:
NO = B
BA = W
RG = R
SO = P
JA = Y
BE = L
VE = GY
GR = G
VI = V
MA = BR
BJ = TA
OR = O
Here is a link to the both CSV and an example excel file with the end result. In this example i haven`t change the shorts for the colors. It takes me too much time with the find and replace function. And at the moment i`m really pushed from time.
[URL]
View 9 Replies
View Related
Apr 4, 2014
I have the attached xl. I want to make import from a specific folder other xl files and after that I want the sheet 1 to find if the values in column g and m (together in the same time) can find it in other xl files. If yes then this values in sheet 1 must turn to red. Can this done?
View 1 Replies
View Related
Aug 5, 2009
I have 5 worksheets, representing data from 5 days, M-F. On a weekly basis I open all 5 files and manually copy, and paste all into one large weekly file. Does not take very long so I am probably just being lazy but if I could find a simple solution to merge all 5 into one quickly it would be great.
The one solution I was planning on implementing was to cycle through all OPEN workbooks, copy the data into a new workbook, and close each workbook as the copy and paste is done. This will work but to me its 'dirty'. Each workbook only has one Worksheet.
View 9 Replies
View Related
Mar 28, 2013
I have 24differnet workbooks each with one sheet with data. Each sheet has the sae headers with differen amounts of info under the headers. I am looking for a quick way to get all 24 sheets in to one workbook instead of copying and paste.
View 3 Replies
View Related
Nov 20, 2006
I have a client that I process their data every Monday and am already using some VBA code on it. I receive their data in four workbooks that have the same name every week.
CABAM_U262.XLS
CABAM_U265.XLS
CABOB_U262.XLS
CABOB_U265.XLS
and the files are put in the same subdirectory every week:
D:HealthcareNewBusiness
What I'd like to do is run some VBA code that would automatically look in this subdirectory for the four files and merge the rows of account data (rows 2 - the last used row and columns A - S) from these four workbooks into one workbook and have the header row from any of the four workbooks (they're all the same) placed in the new "merged" workbook at row 1.
Could anyone provide to me the VBA code that would do this?
View 9 Replies
View Related
Feb 3, 2007
Each month I run 2 separate reports and have macros that break each report out by distributor. The end result is each spreadsheet creates a new tab and new workbook for each distributor’s information. Each spreadsheet has information for 30 distributors, so I end up with 60 new tabs and 60 new workbooks.
Example:
Spreadsheet one separates detailed sales information for:
Abc Company
123 Company
Misc. Company
Spreadsheet two separates summary sales information for:
Abc Company
123 Company
Misc. Company
Currently, I save each spreadsheets new workbooks in a different folder because each spreadsheet creates workbooks with the same distributor name. I then go back and open each spreadsheet with the same name and move a sheet from one workbook to the other and resave. Now I am trying to figure out the best way to merge these back together and am struggling with where to start.
I could keep opening each of the 2 new spreadsheets that are alike and copy or move sheets but with 30 new tabs to move to the matching spreadsheet it becomes time consuming. I’m hoping there’s a better way!
I’ve attached the Sales Detail Example and Sales Summary Example to see how the spreadsheets are being broken out but had to remove some data to trim down file sizes.
View 9 Replies
View Related
Jan 2, 2009
I have two CSV's which are updated on a regular basis.
CSV Master - contains about 23,000 rows at the moment and will continue to grow.
CSV Master - does have a header row
CSV Master has unique (8 digit) numerical ID's in column A so all unique ID's start at "A2"
CSV Master - contains 31 columns ("A through to and including AE") this is a fixed figure.
---- Then I have ---
CSV Extras - generally contains about 200 rows and its unlikely it will ever be more but is contents are different every time it is used.
CSV Extras - does have a header row
CSV Extras has unique (8 digit) numerical ID's in column "A" so all unique ID's start at "A2" and these ID's are a common denominator with both sheets.
CSV Extras - contains 44 columns (last column is AR) which is a fixed figure,
CSV Extras - columns "B up to and including AE" are all intentionally all blank fields.
--- Hope that explains where I am, this is what I need to do ----
I need to be able to look up the ID's (that are in column A in both CSV's) and create a single CSV. In my mind that is a Vlookup of some sort but I can't get it to work
I want to open CSV Master and then, If the ID exists in CSV Extras then fetch all the data in columns "AF to AR" and add it to the CSV Master.
View 9 Replies
View Related
Dec 6, 2006
1. I have a master file (master.xls), currently empty
2. I have 80 excels files (all look a like but their worksheet name are different)
3. I would like all the data from these worksheet to be appended to master.xls with a click of button.
4. I tried using some codes from this forum but they did not work.
5. All the source file starts with ums bla bla.xls
View 9 Replies
View Related
Jan 31, 2007
I have two files that need to be merged together (file1 & file2). These two files have three columns each. One column on both files is the same. This column is labled "phone number". One file has more lines the other has less.
I would like to make a macro that will check file1 against file2. If it finds a phone number the same it will cut the whole line and append staring in column 4 to same line in file1.
View 5 Replies
View Related
Jul 27, 2009
I have two workbooks that I'd like to merge together into a single workbook. Or, pull the worksheet out of one and insert it into another.
View 2 Replies
View Related
Oct 15, 2008
the code necessary to merge all open workbooks (each contains only one worksheet) into 1 workbook made up of all of these individual worksheets?
View 2 Replies
View Related
Jun 3, 2013
I have been looking everywhere and I can't seem to find what I am looking for. I want to create a Macro that will go into a folder, search every Workbook (each with multiple Worksheets), and copy and paste the data onto a single Worksheet. The data that I want will begin in Row 3 of each Worksheet (the first two rows are titles and headers). The formatting will be the same for each sheet.
The only other part is that Column G has the following formula in each cell that I would like to keep if possible.
Code:
=IF(AND(ISNUMBER(F4),ISNUMBER(D4)),"Complete",IF(ISNUMBER(D4),TODAY()-E4,0))
View 1 Replies
View Related
Sep 24, 2013
at the moment I'm trying to consolidate four Workbooks to a Master Workbook.
The four Workbooks I want to merge have the same table structure but except the "Project Number" they have almost different data in their columns.
What I want to do is creating a Master Workbook in which all the Projects are listed once with the information of all four Lists.
While consolidating the data should be checked whether it is already in the Master Workbook or not:
If yes the Macro should copy the to adding data in the existing Project row and there in the correct column.
If not the Macro should create a new row for the Project.
View 3 Replies
View Related
Feb 3, 2014
Two support staff added data to the same base document. I now have two files that I need to combine into one. Is there a way to merge the two together so that I have one workbook that contains all the information entered by both users? We use Excel 2007.
View 1 Replies
View Related
Apr 4, 2007
I'm sure that there is an excel function that can do this but darned if I can figure out which one it is. This is what I would like to do: I have two different workbooks. Each workbook has one worksheet that has two columns of data. The first column is a part number and the second column is a price. The first workbook holds my master data. Starting at the first column of the first row on the second workbook I wish to compare the part number held in that cell with the part numbers held in the first column of the first workbook. If there is a match then I want to take the associated price from the second workbook and place it in a cell to the right of the corresponding part number in the first book - actually in the first open cell in the third column. I wish to do this automatically via macro, or otherwise, for all part numbers in the second workbook. The macro will also need to recognize that some part numbers in the second workbook may not appear in the first workbook in which case that part number is skipped.
The end product is my first workbook that has been transformed from two columns of data to three columns of data - one part number and two price points although not all part numbers will have the two price points. If it helps I can copy the data in the second workbook and paste it in to a second worksheet in the first workbook and do all the work in the one workbook.
View 4 Replies
View Related
