I have 24differnet workbooks each with one sheet with data. Each sheet has the sae headers with differen amounts of info under the headers. I am looking for a quick way to get all 24 sheets in to one workbook instead of copying and paste.
View 3 RepliesI have 10 very large workbooks that are all setup in the same format. In column Z is a numerical value from 1 to 83. I have been trying to filter the sheet and then copy one at a time from 1 to 83 but that takes a LONG time especially when there is 10 workbooks to do.
Is there anyway I can run a function or macro or something that would just automatically look down the column Z and put each row into a it's own workbooks?
I have attached a sample of what the workbooks look like right now.
Sample123.xlsx‎
I have information in range(p10:Q10) on sheet DEMO! that I want to paste the Values only into a Separate sheet "LIST!" in columns(W:X). The row will vary and will be based on the cell: "DEMO!A3" and will match a cell in column A of "List!"
View 9 Replies View RelatedI need to separate row data from one workbook into separate workbooks based on cell data. Currently I filter the data, copy and paste it to a new workbook and save it. It's a tedious process and was hoping to find a way to automate it. I have attached a sample file. In this instance, I would like a separate workbook for the filtered data in Column 1 and then all the row data gets copied to new workbook. So all of Pennsylvania data would get copied to new workbook, then all of the Michigan data gets copied to a new workbook. I have also attached an example of the end result that I need.
View 9 Replies View RelatedTrying to consolidate and Merge Data on a Separate Sheet
View 4 Replies View RelatedI have 5 worksheets, representing data from 5 days, M-F. On a weekly basis I open all 5 files and manually copy, and paste all into one large weekly file. Does not take very long so I am probably just being lazy but if I could find a simple solution to merge all 5 into one quickly it would be great.
The one solution I was planning on implementing was to cycle through all OPEN workbooks, copy the data into a new workbook, and close each workbook as the copy and paste is done. This will work but to me its 'dirty'. Each workbook only has one Worksheet.
merging the multiple *.xls files into one single *.xls file but each *.xls file com in separate worksheet.
Say i have 30 xls files in datewise i.e., 01.10.10, 02.10.10, 03.10.10 so on....
I want to merge all the above 30 xls files in single file master workbook - in that master workbook file the above 30 xls should come in separate work sheets.
I have a client that I process their data every Monday and am already using some VBA code on it. I receive their data in four workbooks that have the same name every week.
CABAM_U262.XLS
CABAM_U265.XLS
CABOB_U262.XLS
CABOB_U265.XLS
and the files are put in the same subdirectory every week:
D:HealthcareNewBusiness
What I'd like to do is run some VBA code that would automatically look in this subdirectory for the four files and merge the rows of account data (rows 2 - the last used row and columns A - S) from these four workbooks into one workbook and have the header row from any of the four workbooks (they're all the same) placed in the new "merged" workbook at row 1.
Could anyone provide to me the VBA code that would do this?
Each month I run 2 separate reports and have macros that break each report out by distributor. The end result is each spreadsheet creates a new tab and new workbook for each distributor’s information. Each spreadsheet has information for 30 distributors, so I end up with 60 new tabs and 60 new workbooks.
Example:
Spreadsheet one separates detailed sales information for:
Abc Company
123 Company
Misc. Company
Spreadsheet two separates summary sales information for:
Abc Company
123 Company
Misc. Company
Currently, I save each spreadsheets new workbooks in a different folder because each spreadsheet creates workbooks with the same distributor name. I then go back and open each spreadsheet with the same name and move a sheet from one workbook to the other and resave. Now I am trying to figure out the best way to merge these back together and am struggling with where to start.
I could keep opening each of the 2 new spreadsheets that are alike and copy or move sheets but with 30 new tabs to move to the matching spreadsheet it becomes time consuming. I’m hoping there’s a better way!
I’ve attached the Sales Detail Example and Sales Summary Example to see how the spreadsheets are being broken out but had to remove some data to trim down file sizes.
I have two workbooks that I'd like to merge together into a single workbook. Or, pull the worksheet out of one and insert it into another.
View 2 Replies View Relatedthe code necessary to merge all open workbooks (each contains only one worksheet) into 1 workbook made up of all of these individual worksheets?
View 2 Replies View RelatedI have been looking everywhere and I can't seem to find what I am looking for. I want to create a Macro that will go into a folder, search every Workbook (each with multiple Worksheets), and copy and paste the data onto a single Worksheet. The data that I want will begin in Row 3 of each Worksheet (the first two rows are titles and headers). The formatting will be the same for each sheet.
The only other part is that Column G has the following formula in each cell that I would like to keep if possible.
Code:
=IF(AND(ISNUMBER(F4),ISNUMBER(D4)),"Complete",IF(ISNUMBER(D4),TODAY()-E4,0))
at the moment I'm trying to consolidate four Workbooks to a Master Workbook.
The four Workbooks I want to merge have the same table structure but except the "Project Number" they have almost different data in their columns.
What I want to do is creating a Master Workbook in which all the Projects are listed once with the information of all four Lists.
While consolidating the data should be checked whether it is already in the Master Workbook or not:
If yes the Macro should copy the to adding data in the existing Project row and there in the correct column.
If not the Macro should create a new row for the Project.
Two support staff added data to the same base document. I now have two files that I need to combine into one. Is there a way to merge the two together so that I have one workbook that contains all the information entered by both users? We use Excel 2007.
View 1 Replies View RelatedIf i have 25 different workbooks in one folder is it possible to open/merge all 25 workbooks into one workbook without having to copy and paste each individual workbook.
Each workbook only has a sheet1. I hope there is it would save a lot of time
I'm sure that there is an excel function that can do this but darned if I can figure out which one it is. This is what I would like to do: I have two different workbooks. Each workbook has one worksheet that has two columns of data. The first column is a part number and the second column is a price. The first workbook holds my master data. Starting at the first column of the first row on the second workbook I wish to compare the part number held in that cell with the part numbers held in the first column of the first workbook. If there is a match then I want to take the associated price from the second workbook and place it in a cell to the right of the corresponding part number in the first book - actually in the first open cell in the third column. I wish to do this automatically via macro, or otherwise, for all part numbers in the second workbook. The macro will also need to recognize that some part numbers in the second workbook may not appear in the first workbook in which case that part number is skipped.
The end product is my first workbook that has been transformed from two columns of data to three columns of data - one part number and two price points although not all part numbers will have the two price points. If it helps I can copy the data in the second workbook and paste it in to a second worksheet in the first workbook and do all the work in the one workbook.
I have 51 workbooks that I would like to combine into one workbook. Each workbook varies in number of rows, but have the same number of columns. There are 31 Columns (AE).
Is there a fast way of doing this or will I have to cut and Paste?
I have had a good look around and have found some scripts that look like they can help but do not. here is my situation
I have 300+ questionaires in excel that contain around 20 questions with each question having the possibility of 5 answers
i.e
A1
A1Do you like this service, answers will be scored in cells F1,G1,H1,I1,J1
What I would like is for a master document to combine all the data into 1 document so I will know how many of the 300 have F1,G1 etc.
In the filed F1 the variable may be X or it may be a number, I would like to add up the number of non blanks in that field, from 300+ closed workbooks
I would like to merge multiple workbooks into a master workbook. All the individual workbooks are identical and only have 1 sheet, and I would like to append them to the master as worksheets then sum them all together. The front sheet showing the totals from all the merged ones.
View 5 Replies View RelatedI have a folder named DATAENTRY (consist 90-100 password protected files & it may increase whenever the need arises).
I need to merge A2 to (data in last available row & last available column) of each file in that folder into a single sheet named MERGEDDATA of file named MASTER.XLS.
I got one excellent code to unlock/lock the files automatically without opening the concerned files. This is the Link [url]
& the Code is: ...
Some copies of excel workbooks are made using save as option for data entry purpose. Each copy has same file structure because they are created using save as option. Is it possible to merge them (preferably preserving the macros) ? The workbooks are not shared because they were protected sheets and so macros wont run.
View 9 Replies View RelatedI have 4 different workbooks that I want to merge into one workbook. I tried moving the sheets from these workbooks into one workbook but to my surprise all the vba / macros didn't transfer over to the other workbook.
I searched here but all I can find were people that wanted to make a summary workbook or merge workbooks into a worksheet which isn't what i want to do.
I just want to simply merge these workbooks into one workbook without losing all the marco and vba stuff that are in each workbook.
I have 2 separate workbooks and I would like the Vlookup function to look for the value in "DO" after matching the both "Job Sheet". I have attached 2 files for better understanding.
View 4 Replies View RelatedI am trying to find a way where I can just enter the information into one and have it flood to the other.
worksheetA is the master sheet which contains data on all accounts - the order and number of entries on this account changes monthly.
worksheetB shows data only on a single account.
What I am looking to do is to take the account name from worksheetB find the data I entered in worksheetA and have that flow to the apporitate cells in worksheetB.
Something like this
cell on worksheetB displaying number of vehicles - if worksheetB(cell with the account name) = worksheetA(range of cells with multiplenames) if the two match somewhere on the list then display the number of vehicles from a cell in another coloum same row.
sorry if its confusing, tried my best to explain it. I'm sure it can be done with VB but just don't know that one much, is the syntax and language similar to the old ms basic?
I have a workbook which have worksheets say A to J. I wanted it to be separated into 10 different workbooks A.xlsx, B.xlsx, C.xlsx and so on in drive C. Could anyone help me here?
View 6 Replies View RelatedI would like to separate data into multiple workbooks based on a unique value in the column. For instance if I have Departments in Column F, that has data of accounting, HR, etc. I would like to put all accounting data into a accounting workbook and all HR data in a HR workbook.
View 4 Replies View RelatedI have 2 workbooks open and I want to set up formulas from one linking to the other. When I toggle on the task bar between the 2 workbooks they replace each other within the same window so I can only see one workbook at a time. How do I set it up so I can have 2 separate windows open at the same time, one with each workbook in it? I tried 'side by side' in one window but the viewing area is too small.
View 9 Replies View RelatedI have a workbook with multiple sheets and I want to make these sheets into separate workbooks. I need them to be saved in the same path as the original workbook and automatically named (same filenames as worksheet names). I tried a code from a VBA book, and I got "Object needed" error message.
View 3 Replies View RelatedI have workbooks based on the date. Here is an example "Daily Numbers Report - Summary_2014_02-18-06-02-30"
All of the files are formatted this way. Then, in a master file I have dates going horizontally for the entire year in the following format Tue Jan 15, etc. How could I do a lookup that would grab from all of the open files and match the date BUT subtract 1 day from that date for all the lookups, so Feb 18 would look at 2-17?
I have a large workbook with many worksheets which are all grouped into pairs - i.e. Sheet1 & Sheet2 go together, Sheet3 & Sheet4 go together; Sheet5 & Sheet6 go together, etc. etc.
I need a macro to divide this workbook into separate workbooks where each group of worksheets has a separate file of its own and I want to name the new workbooks after the second sheet in each group:
i.e. A new workbook for Sheet1 & Sheet2 called Sheet2.xls; a new workbook for Sheet3 & Sheet4 called Sheet4.xls; a new workbook for Sheet5 & Sheet6 called Sheet6.xls; etc. etc. etc.