I have up to 50 workbooks in one folder with data in a specific range. I also have one workbook which includes additional data, including conditional formatting and dropdowns. I need to copy the desired range from the first workbook in the source folder to the second workbook, then save the latter to my destination folder, using the same name as the first. I need to repeat this process for all workbooks in the source folder.
I've tried to combine rows, but can't seem to do it. I have a spreadsheet with over 18,000 lines of data, and I really don't want to go through each line to add information from another line and then delete that line. Is there a formula that can do this? I have attached a sample of what I have and what I need.
I haven't really been able to find a total solution to an issue I have had for a while and hope someone can help.
I have a series of workbooks that I create from Crystal reports, I want to do the following after clicking a button on a form:-Open up two files in a folder with similar names (IL-BA, IL-BA-19), both have the same headers
Open a Third file, this is my 'Master File' and is in a different location, this has the same headers
Copy from the two files onto 1 sheet on my master file (excluding the headers) Close the first two files without saving and move them to a 'Done' folder Save and Close the Master File
Move onto the next set of files in the folder (NE - BA,NE - BA - 19) and do the same again, until all the files in the folder have been completed.
All the files in the folder have different data, so have different headers, but the Master file for each set will always have the same headers, (if that makes sense), but they are specifically named, so cycling through the named files in the folder, merging the two together.
My main problem is that I can't seem to find all the code i need, i can merge the two files, either in different sheets(which i don't want), or with the headers for each file still attached (as i can't seem to find a robust way of removing them).
I have the attached xl. I want to make import from a specific folder other xl files and after that I want the sheet 1 to find if the values in column g and m (together in the same time) can find it in other xl files. If yes then this values in sheet 1 must turn to red. Can this done?
I have 5 worksheets, representing data from 5 days, M-F. On a weekly basis I open all 5 files and manually copy, and paste all into one large weekly file. Does not take very long so I am probably just being lazy but if I could find a simple solution to merge all 5 into one quickly it would be great.
The one solution I was planning on implementing was to cycle through all OPEN workbooks, copy the data into a new workbook, and close each workbook as the copy and paste is done. This will work but to me its 'dirty'. Each workbook only has one Worksheet.
I have 24differnet workbooks each with one sheet with data. Each sheet has the sae headers with differen amounts of info under the headers. I am looking for a quick way to get all 24 sheets in to one workbook instead of copying and paste.
I have a client that I process their data every Monday and am already using some VBA code on it. I receive their data in four workbooks that have the same name every week. CABAM_U262.XLS CABAM_U265.XLS CABOB_U262.XLS CABOB_U265.XLS and the files are put in the same subdirectory every week: D:HealthcareNewBusiness
What I'd like to do is run some VBA code that would automatically look in this subdirectory for the four files and merge the rows of account data (rows 2 - the last used row and columns A - S) from these four workbooks into one workbook and have the header row from any of the four workbooks (they're all the same) placed in the new "merged" workbook at row 1. Could anyone provide to me the VBA code that would do this?
Each month I run 2 separate reports and have macros that break each report out by distributor. The end result is each spreadsheet creates a new tab and new workbook for each distributorís information. Each spreadsheet has information for 30 distributors, so I end up with 60 new tabs and 60 new workbooks.
Example: Spreadsheet one separates detailed sales information for: Abc Company 123 Company Misc. Company
Spreadsheet two separates summary sales information for: Abc Company 123 Company Misc. Company
Currently, I save each spreadsheets new workbooks in a different folder because each spreadsheet creates workbooks with the same distributor name. I then go back and open each spreadsheet with the same name and move a sheet from one workbook to the other and resave. Now I am trying to figure out the best way to merge these back together and am struggling with where to start.
I could keep opening each of the 2 new spreadsheets that are alike and copy or move sheets but with 30 new tabs to move to the matching spreadsheet it becomes time consuming. Iím hoping thereís a better way!
Iíve attached the Sales Detail Example and Sales Summary Example to see how the spreadsheets are being broken out but had to remove some data to trim down file sizes.
I have been looking everywhere and I can't seem to find what I am looking for. I want to create a Macro that will go into a folder, search every Workbook (each with multiple Worksheets), and copy and paste the data onto a single Worksheet. The data that I want will begin in Row 3 of each Worksheet (the first two rows are titles and headers). The formatting will be the same for each sheet.
The only other part is that Column G has the following formula in each cell that I would like to keep if possible.
Two support staff added data to the same base document. I now have two files that I need to combine into one. Is there a way to merge the two together so that I have one workbook that contains all the information entered by both users? We use Excel 2007.
I'm sure that there is an excel function that can do this but darned if I can figure out which one it is. This is what I would like to do: I have two different workbooks. Each workbook has one worksheet that has two columns of data. The first column is a part number and the second column is a price. The first workbook holds my master data. Starting at the first column of the first row on the second workbook I wish to compare the part number held in that cell with the part numbers held in the first column of the first workbook. If there is a match then I want to take the associated price from the second workbook and place it in a cell to the right of the corresponding part number in the first book - actually in the first open cell in the third column. I wish to do this automatically via macro, or otherwise, for all part numbers in the second workbook. The macro will also need to recognize that some part numbers in the second workbook may not appear in the first workbook in which case that part number is skipped.
The end product is my first workbook that has been transformed from two columns of data to three columns of data - one part number and two price points although not all part numbers will have the two price points. If it helps I can copy the data in the second workbook and paste it in to a second worksheet in the first workbook and do all the work in the one workbook.
I have had a good look around and have found some scripts that look like they can help but do not. here is my situation
I have 300+ questionaires in excel that contain around 20 questions with each question having the possibility of 5 answers i.e A1 A1Do you like this service, answers will be scored in cells F1,G1,H1,I1,J1
What I would like is for a master document to combine all the data into 1 document so I will know how many of the 300 have F1,G1 etc.
In the filed F1 the variable may be X or it may be a number, I would like to add up the number of non blanks in that field, from 300+ closed workbooks
Is it possible too do this if they are on the same computer. Lets say I want all the data on page3 in one workbook, data on page2 in another and have it show up in another workbook. If this can be done can it delete cell entry that match?
I am trying to combine multiple workbooks together. I have some code that works great except I only want it to combine one sheet from each workbook. The workbooks are identical they just hold different data. Each book contains 8 worksheets and I want to copy only data from "Container Info"
Code: Option Explicit Sub CombineSheetsFromAllFilesInADirectory() Dim Path As String
I would like to merge multiple workbooks into a master workbook. All the individual workbooks are identical and only have 1 sheet, and I would like to append them to the master as worksheets then sum them all together. The front sheet showing the totals from all the merged ones.
I've been attempting to find a macro that would combine a number of similar workbooks into one large workbook. The files I'm dealing with are all .csv files with identical columns and headers.
I found one macro here: see below (this is the start of the macro) yet either I'm not using it correctly or there are errors in it as when I run it I get an error that says Run-time error '9' Subscript out of range and gives me the option to debug it. When I choose to debug it opens up the macro and has the following section highlighted?
Set wsMaster = ThisWorkbook.Sheets("Master") 'sheet report is built into
The macro in I found on this site begins with the following:
Sub Consolidate() 'Author: Jerry Beaucaire' 'Date: 9/15/2009 (2007 compatible) (updated 4/29/2011) 'Summary: Merge files in a specific folder into one master sheet (stacked) ' Moves imported files into another folder
I have a set of excel files that I need to combine into one worksheet. The files have the same number of rows but the number of column will vary. The combined worksheet needs to have the data from each workbook appended to the last column.
I have this master file with a list of workbook names in column A on a tab called, conveniently, List. I have saved the master file in the same folder as a number of workbooks where their names match the names on the List.
What I want to do is open the files on the List and copy and move the worksheets to a new workboook. The catch for this is the following (I will use an example):
1. I have 2 workbooks called DS-100 Medicine Admin and DS-101 Medicine Wards 2. I want to take the worksheets from DS-100 and add them in a new workbook 3. Then I want to take the worksheets from DS-101 and add them to the same workbook but AFTER the DS-100 worksheets that were added in step 2 4. Then save this workbook to a folder within the original folder where the files are saved
I have the below code thus far, which opens the DS-100 workbook and copies and moves the worksheets to a new workbook. It doesn't open the DS-101 workbook though. It also saves the new workbook in My Documents rather then the SavePath.
Sub CombineMedicine() Dim Path As String 'string variable to hold path to look through Dim FileName As String 'temporary file name variable Dim Master As Workbook 'this workbook Dim rng As Range
Is there a way to take 4 workbooks with each one containing 4 worksheets into one content page?
For Example, I would like to have a table of contents on one worksheet referencing 4 workbooks where a person could click on a hyperlink that would open to a named workbook that contains 4 separate worksheets.
I've got a macro that combines multiple worksheets and workbooks. Just a minor problem, the very last row of each worksheet is being deleted, and I can't seem to pinpoint the cause of the problem.
'This will copy data from all sheets of the selected workbooks 'To a sheet named 'Data' in the sheet in which the macro is run from
Dim pasterow As String mainsheetname = ActiveWorkbook.Name MsgBox ("Please select spreadsheets to combine") filestoopen = Application. GetOpenFilename(MultiSelect:=True) responseval = MsgBox("Do you want to leave the combined spreadsheets open?", vbYesNo) Worksheets("Data").Select Range("A1").Select 'open workbooks For Each w In filestoopen...................
Some copies of excel workbooks are made using save as option for data entry purpose. Each copy has same file structure because they are created using save as option. Is it possible to merge them (preferably preserving the macros) ? The workbooks are not shared because they were protected sheets and so macros wont run.