Merging All Files Data In A Folder
Jan 8, 2013I am having couple of excel files with same sort of data. Want to merge all the data from differnt files into a single excel file.
How could I do this??
ADVERTISEMENT
Merging / Appending Folder Of Text Files
Jul 30, 2012I have a folder containing text files. Any way by which I could merge all the text files into one file - one after another?
View 5 Replies View RelatedMerging / Appending Folder Of Files With File Extension?
Aug 21, 2012I have a folder containing 1000's of files. All the files end in .txt (for example test.txt) but are actually excel files. When I go to open the files with excel I get the following warning:
The file you are trying to open is in a different format than specified by the file's extension. Verify that the file is not corrupt and from a trusted source before opening the file. Do you want to continue?
I click "yes" and it opens fine as an excel file.
I want to merge all these files one after another into one file.
Copy Data From All Files In Folder
Jul 20, 2014I want to copy data from column A1:D50 from all worksheets available in my folder regardless of any specific file name,
View 4 Replies View RelatedGrab Data From All Files With Certain Name In A Folder
Jun 28, 2009Is it possible to have a spreadsheet that when opened grabs data from every file with "*invoice" in the title in folder 2009 and all its sub directories and puts them into a list in the opened file?
The data needed is to be from sheet1, cells B16, C18, G18 from all the files
and i would like B16 put into A2, C18 into B2 and G18 into C2
Then the next sheets data B16 to A3, C18 B3 and G18 to C3 etc etc until all files with invoice in the title have been added.
B16 is a name
C18 is an address and
G18 is a postcode
This means there can be no duplicates so if opened twice there will only ever be 1 of the same address and postcode.
Excel 2003 :: Extract Variable Rows Of Cells From Files In A Folder To Existing File In Folder
Mar 15, 2013I need a macro in a workbook to look at all the files in the same folder that have "*att*.xls" in the name and determine and copy from the range A15:W515 only the rows that have data in at least columns A, C and D. Each file will vary as to how many rows there will be and there are more than the files with "*att*.xls" in the folder. The data will be on the only worksheet in each file and the worksheet is named "G2WAttendee_xls" the data from all the files need to be copied to the file called "Consolidated webinar reports.xls" (I am using Excel 2003) and to a sheet called "Attendance Data" and added to the end of the last paste.
At the start of the macro the current file "Consolidated webinar report.xls" should be saved to a sub folder of the current directory and have the date saved added to the name. The sub folder is called "Completed reports". The data in the original file on worksheet "Attendance Data" should be deleted.
At the end of the process all the files that have had data copied from them should be moved to the sub folder "Attendance reports consolidated" (This could be done as each file is closed if that is easier).
I have headings in row 1 of the "Attendance Data" worksheet that match the headings in the various files in the folder (which will always be in row 14 of the individual "*att*.xls" files).
The folder with all the files and the "Consolidated webinar report.xls" file is at path "Z:P and S MEvaluationsWebinar series 2012-13TB".
Pull Data From Csv Files Added Into Network Folder?
Jul 14, 2014Scenario; I have 3rd party software that pulls reports in .csv files. I want to summarise this data into another spread sheet. Ideally I would like to save these files into a folder on the network and my summary workbook simply looks for this folder and is able to find data within all Excel files saved in there (new files will be added on a monthly basis).
Once it has found the folder there will be 2 pieces of data to evaluate; Cell $B$1; this will be the name of a course (e.g. health & safety, money laundering etc.) Column $D; this will contain the score achieved by multiple learners.
The summary spreadsheet then averages all of the scores for the different courses(in seperate cells)
The idea is that the .csv files can be pulled and saved into said folder and eliminates the need to manually input this data into the summary spreadsheet.
Get Data From Changing Filenames & Move Files To Another Folder
Nov 22, 2007I am trying to develop an excel macro to accomplish the following:
-I have a master workbook for collecting data
-One folder will be used to dump excel files into; I don't know the filenames (other than "*.xls"), but I do know from which cells I will need to retreive data (they will be the same for all files)
1. I need to retrieve data from these excel files
2. After getting data from a file, it is then moved to another folder
3. Next the retreive data, then move is performed on the next excel file until there are none left in C:IN
Upon searching this forum, I found a way to open each of these files one by one (without having to know the filenames): Using a script to open unspecified file name
- For me, the obstacle seems to be not knowing how to do what I need to without knowing the filenames
- Again, the issue - retrieve data from these files, then rename/move these files
Merging All Spreadsheet Within A Folder
Dec 26, 2007I would like to Merge several Spreadsheet together from a folder, and the number of the spreadsheet within the folder is not specified as it varies depending on day. I am just wondering if this is possible. I have tried using the normal record function but they merge the spreadsheet but I dont know how to get it to look for other files in a folder.
Convert Horizontal Data To Vertical - Loop Through Files In Folder
Apr 9, 2014I have a set of workbooks-all located in the same folder-in which data are shown "horizontally"
i.e. file 1 - sheet1 looks more or less like this:
1 2 3
4 5 6
same with the other files.
what I am trying to achieve is that in another woorkbook, all the data are copied in one vertical vector
i.e
1
2
3
4
5
6 from file 1 and then
1
2
3
4
5
6 from file 2
I can seem to be able to resize the array to the correct size but the only values copied are for the last file. in the example that I have above, the result would look something like:
<empty>
<empty>
<empty>
<empty>
<empty>
<empty>
1
2
3
4
5
6
This is the code I have so far:
Sub Consolidate()
Dim a As Workbook
Dim b As Workbook
Dim x, y(), i&, j&, k&
Dim myPath As String
Dim filename As String
Dim wb As Workbook
[Code] .........
Open Files In Folder- Wait 30 Seconds Then Close The Files
Jul 5, 2007I want to allow users to place files (.jpg, .tif, .pdf, .pps etc) into a network folder and then have my program open each file and display it for 30 seconds then close the file and the application before opening the next file.
1. Set up a loop to get a directory listing of the folder and write the listing to a text file.
2. Open up the text file and get the next filename in it
3. Open the file in the associated application
4. Wait for 30 seconds (or some period of time) and then close the file
5. Repeat steps 2-4
DoIt = 1
While DoIt = 1
Open "C:TempList.txt" for output as #1
Print #1, Files In Folder
Close #1
Open "C:TempList.txt" for input as #2
while not eof(2)
Line input #2, MyFile
Display MyFile on screen
Wait for 30 seconds
Close MyFile and MyApplication that opened it
wend
Close #2
I can get the directory listing just fine with no problems
I can open the files in the associated application just fine with no problems.
with closing the application after 30 seconds or some period of time.
I need some code that will allow me to easily send it a filename and it will know how to close the file and the application that opened it.
Files Saved To Program Files Folder, Open As Read Only
Feb 8, 2009I have an Excel application (Excel 2003) which is stored in the default Program Files folder by the Installer; for example: c:program fileszxchello.xls. The problem I am running into is this file opens as Read Only in Vista and this is interfering with the running of the application. There is no problem opening the file normally in Windows XP.
I have been able to narrow down the cause of this to the User Account Control system in Vista - if I turn OFF User Account Control, the Excel file opens normally and my application functions normally. Is there another option to open the Excel file without turning OFF User Account Control because some users may find it unacceptable to turn OFF this security feature. Ofcourse, one option is to install the application in another location, outside the Program Folder, and the file would open normally, but the Packaging Wizard that I am using to package the application does not allow me to install the application in any other location and thus, the application installs in the Program Folder and I am running into this problem of the Exel file opening as Read Only. Is there a way out of this situation where I can open the file normally (not as Read Only)?
Merging Two Files
Dec 16, 2008merging two Excel files. 2009 Item List.xls file has two columns Part number and Description. Price.xls file has two colums: part number and price. I need to merge them into a file that whould have three colums: part number, description, price. There 6712 rows in 2009 Item List.xls and 4743 rows in Price.xls file. So I need them matched based on the part number, and have the cells blank for the part numbers for which the price was not assigned.
View 9 Replies View RelatedConvert All CSV Files In A Folder To Excel Files?
Apr 8, 2014I is it possible to convert all comma separated text files in a single folder in to excel files. But the requirement is to have 2 sheets in each new file. first to be the full file - with all columns, and in the second sheet to keep only colum A B D G H K L M O P R S T V W from the first sheet. The second sheet name must be the same as the first one but without the first "wlist_" in the name.
One more thing. The third column in the second is called "COUL". there are short letters for colors in french
can they be converted with the sort in English like it goes:
NO = B
BA = W
RG = R
SO = P
JA = Y
BE = L
VE = GY
GR = G
VI = V
MA = BR
BJ = TA
OR = O
Here is a link to the both CSV and an example excel file with the end result. In this example i haven`t change the shorts for the colors. It takes me too much time with the find and replace function. And at the moment i`m really pushed from time.
[URL]
Merging Files Into One Spreadsheet?
Jul 31, 2012Is there any way to merge multiple Excel spreadsheet pages into one?
View 1 Replies View RelatedMerging Files Automatically Named Based On Date
Oct 3, 2013I am trying to merge 2 files (FileA and FileB) into a new file which will be automatically named based on the date. I would only need Sheet 2 of both files to be copied over and merged into the new file. The range to be copied is from Row 3 onwards to whichever point where the data ends. All the files can be found in a specific drive and the new file should be created there as well.
View 4 Replies View RelatedSearch Folder For Files Containing "Temp", Delete Files
Jun 26, 2008Is there a code that will search a pre-determined folder for all .xls files containing the word "Temp", and deleting those files?
Example:
In the root of drive M, I have several Excel files. Anytime one of the original tracking logs is opened, a temp file of that log is automatically created. I would like to automatically search the drive and delete all files containin the word "Temp".
I've attached a picture of the directory tree, in case that will help. The file will always be named "PO Response Tracking - Temp#######.xls", with ###### representing a series of either 5 or 6 numbers.
Copy Files From One Folder To Another?
May 26, 2014vba to copy files (pdf / cad) from various source to destination folders. Column A will list the source of the PDF files, Column B with the file name, Column C with the destination folder. Column D with value Y or N with Y denoting Yes to Copy and No for No. I have like 30000 rows of data.
View 3 Replies View RelatedLoop Through Files In A Folder
Mar 11, 2014I would like to create a Macro which does the following task. I have a Workbook Master.xlsx with a worksheet "source". The path of Master.xlsx is C:Test
In the Directory C:Testprojects i have about 50 files which all contain the String "Forecast" in their filename. These Forecast Workbooks need an update in the Worksheet "actuals"
So, i need a Macro that copies WS "source" from WB "Master" to WS actual in all WB's Forecast.
Modify ALL Files In A Folder
Jan 6, 2009I've (almost) got a macro that modifies & saves a file. I don't want to post it yet because I need to clean it up and I've got a ton of REM'd out statements that I need to flush before I go public....
How can I modify it to open each file in the folder? I'm looking at several thousand files that need to be changed and put away in the correct folder.
(and I say almost because I had it and accidently ran it on my personal workbook and it deleted itself....
List Files In Folder
Mar 24, 2009Is there a way list load all the files names in a folder in to a listbox in a userform
View 2 Replies View RelatedList All Files In Folder
May 7, 2009I have a folder C:My Documents that contains excel & Pdf files. Is it possible to list all the files by name contained in this folder in a excel spreadsheet i.e one filename one cell?
View 4 Replies View RelatedOpen All Files From A Folder
Aug 4, 2009I have created a Spreadsheet that does all of the calculations, analysis, graphs, etc. that i need; however every time I wish to use this spreadsheet I need to first open up a spreadsheet with data, copy it and then paste it into the original spreadsheet. While this is not horrible, it is quite tedious to do several thousand times.
Thus, I was wondering if it were possible to create a Macro that would open up all files in a specific folder, then select each one and paste the relevant data into my original spreadsheet. I know this possible for specific files; for example, I have created a Macro that will select files data.xls, dats1.xls, data2.xls, and paste these into the spreadsheet, but I was wondering if there was a way to generalize this so that it will simply open every file regardless of the name or how many files there are in the specific folder.
Cycling Through Files In A Folder
Sep 21, 2009I'm a novice with VB, so go easy on me. I'm trying to write a macro to copy the same couple of cells from hundreds of excel files and paste them into one summary file. What I've written so far is:
View 10 Replies View RelatedOpening All .htm Files In Folder
Nov 27, 2009I am trying to come up with a macro that is able to open a .htm file in Excel, perform a set of code, close the file, then repeat the process with the next .htm file in the folder. I found the following post which has helped me thus far, but there is something that is not allowing Excel to open the .htm files even though there is no problem opening them in Excel manually or with another macro I've made. Here is the link to the set of code I'm currently working with:
http://www.excelforum.com/excel-prog...-a-folder.html
I've put some .xls and .csv files into the target folder and the program works perfectly which tells me Excel is having a problem with the .htm format for some reason. Here is the set of code I currently have which I have slightly modified for the new file format:
Renaming All CSV Files In A Folder
May 14, 2007I have several (around 35) CSV files that I download regulary. Is there a quick way to rename all the CSV files in a given folder based on adding "Update_" to each file name.
E.g Say two of the orginal files are called:
Monday.csv
Tuesday.csv
I'd like to run some kind of macro to rename them to:
Update_Monday.csv
Update_Tuesday.csv
Move Files To Folder By VBA
Aug 6, 2012In the code below I would like to add to move these files:
byemployee.csv
byposition.csv
status report.xls
bydepartment.csv
and if the file byband.csv exists, then move also otherwise ignore. I want to move to the folder Uploads which is also found under the variable MyPath
If it cannot be included in this code, then I have no problem with a new one.
Private Sub Exitbtn_Click()
Dim MyPath$, MyName$
Application.ScreenUpdating = False
Call chooseView.hideSheets
'Save the file to this path and type file name
[Code]....
Move Files From One Folder To Another
Oct 29, 2012I have the following two folders located in my D Drive:
1. D:FilesData
2. D:FilesArchives
I have lots of files (.txt) in the first folder (D:FilesData) from which I need to move all the files whose first character is starting with _(underscore) to the second folder (D:FilesArchives).
Search For Only XLS Files In A Folder?
Jun 18, 2013I found some code on here the other day which will do though all the files in a folder and send them to a zip file which works great how to zip a single fixed file. I down load files from our oracle system daily and need to keep them but want to keep the file size down.
Code:
Sub ZipPackage()
Dim ZipFile, TargetFolder, NewFileName, ofile
Dim o As Object
[Code]...
But the "ofile" doesnt contain the file type. Is there away to adjust this code so it recognises what the file type is?
VBA - Open All XLS Files In Folder
Mar 11, 2014I have a prompt for the user to select a folder and then assign the path a variable. I would then like the VBA macro to open all files within that folder (no sub folders) that end in .xls.
View 3 Replies View Related