I have the following code:
[Code] .....
This section:
[Code] ......
returns the cell that the date has passed in.
I would like it to return a different cell value in the message box, for example if J4 has passed its date, then B4 cell value is put in the message box instead.
I have a formula that looks at a cell on a front sheet, and then returns the contents of that cell as the result if it meets the criteria. So for example this formula would be in Cell A1 on Sheet2 IF(SHEET1!A1,"New",Sheet1!A1,"-")
This formula is always in the same cell (different sheet) as the cell that it is looking at, down 1500 rows. Instead of having the formula named for each cell is there anyway to ask excel to 'look at this cell but on this other sheet'.
e.g IF(Sheet1!"This Cell" etc). That way no matter what cell you put the formula in it is always referencing the correct cell for the formula?
I'm trying to generate a message box when a lookup cell returns the #N/A error value.
The lookup formula (=VLOOKUP(O8,Prod_Lookup,6,FALSE)) is in a "helper column" and returns a value of 0 if there is no entry in the lookup source sheet, but returns a value of #N/A if a non-matching date is entered in the active worksheet.
I have the following, but need some help in getting it work correctly. At present, it doesn't trigger the message box to pop up.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim Prod_Val As Range
Dim note1 As String
Set Prod_Val = Worksheets("C_Data").Range("P8:P7000")
note1 = "Brazer PPM cannot be calculated because the Daily Production Count" & vbLf & _
"has not been entered for this date." & vbLf & vbLf & _
"The Daily Production Count must be entered prior to entering the daily leak data." & vbLf & vbLf & _
"Upon clicking the OK button you will taken to the Production Count sheet to enter the data."
I'm getting cross-eyed from trying to find the source of the error and not having any success. I've successfully used this approach many times, but for some reason I'm getting an error I can't pin down.
The problem: INDEX-MATCH lookup formula returns # NAME error. Formula: =INDEX(Data,MATCH(H8,Date,0),MATCH($I$7,Line,0),MATCH("FPY",Hdngs,0)). I've done my best to verify the named ranges and cell references are correct and have stepped through the help file on the "potential source of the error", including going to Tools >Options and making sure "Accept Labels in Formulas" is checked, as well as having read a number of other posts.
=IF(AND(Weekly!$E4<>Admin!$E$2,Weekly!$E4<>Admin!$E$3),
COUNTIFS('Issue Log'!$A$2:$A$50,$A4,'Issue Log'!$B$2:$B$50,$B4,'Issue Log'!$C$2:$C$50,'Issue Log'!$C2,'Issue Log'!$D$2:$D$50,"<>"&"Completed",'Issue Log'!$D$2:$D$50,"<>"&"",'Issue Log'!$D$2:$D$50,"<>"&"Cancelled"),0)
WEEKLY
ResourceProjectContact ActivityStatusEst. TimeAct. Time # of Issues
Elaine W.PIPBA - Bonnie SchaferTESTIn Planning1
ISSUE LOG
ResourceProjectActivityIssue Status
Elaine W.PIPTESTCompleted
[code]....
I have a spreadsheet that monitors employees rest periods between shifts across a number of weeks I've started writing a very basic piece of code so if the employee has less than 12 hours rest, a message box will appear with a warning:
So far this is what I've done:
Sub RestHours()
If Range("I7") < #12:00:00 PM# Then
MsgBox "Candidate has had less than 12 hours rest since last shift worked. Please find another candidate to work this shift", vbOKOnly, "Unable to Use Candidate!"
Now this does work if I run the macro and then enter the data into cell I7, however I'm now stumped - How can I make it so that this message box pops up automatically when the data is entered into the cell without me have to go in and run the macro?
I also need the macro to run all the way down the I column (I7:I100) and across other columns which will eventually contain the same data i.e. M7:M100, Q7:Q100, all the way across to AT7:AT100?
I have created a sheet that calculates a score. Based on that score a determination is made to do one of three things - Nothing, Peer/Manager Review, Review Required.
In addition it was requested now that I make an overall decision for "Review Required" based on multiple triggers. My thought was to create a table from outputs of each element on another sheet, and then trigger off the table. What I am stuck on is using the multiple choices to trigger the message - Below are the choices of which each or a combination of each should trigger "Review Required"
Calculate Review Required
Total Score 'Review Required
Element 1 "
Element 2 "
Element 3"
Element 4"
Element 5"
Element 6"
Element 7"
Element 8"
Element 9"
Element 10"
Element 11"
Element 12"
Element 13 "
Element 14 '20 or more = reveiw
Element 15 '20 or more = reveiw
Element 16 '20 or more =review
Element 17 'Sum 20 Total of above if less than 20 in each
I have a worksheet with several columns (30+). One of these columns is "Date Opened". This "date opened" column can have dates as early as 01/01/89 and as recent as today.
Can a macro be made that does this
1. Data/Sorts the whole worksheet by the "Date opened" column
2. Brings up a message box in xx/xx/xxxx where format saying "Please enter the earliest date opened you would like to use, all other rows will be deleted"
3. Do just that, delete all rows that have a date earlier than the date entered in the message box.
So if the date of 01/01/2009 were entered into the message box, the macro would delete all dates in the "Date Opened" column that were older than that date.
And then, continue on with the rest of the sub, if neccessary.
I have a nice case to prepare and need weekly riskfree interest returns on the UK treasury bond. Right now I have daily returns and want to convert them into weekly. The problem is, weeks do not always contain five trading days. How can I turn my data into weekly average riskfree interest returns?
******** ******************** src="*********>*********>Microsoft Excel - UK interest daily.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA1=ABCD1DateInterest rateweekday 24-Jan-889.871 35-Jan-889.992 46-Jan-8810.053 57-Jan-8810.094 68-Jan-8810.135 711-Jan-8810.051 812-Jan-8810.072 913-Jan-8810.283 1014-Jan-8810.114 1115-Jan-889.985 1218-Jan-889.871 1319-Jan-889.962 1420-Jan-889.913 1521-Jan-889.864 1622-Jan-889.715 1725-Jan-889.71 1826-Jan-889.762 1927-Jan-889.693 2028-Jan-889.564 2129-Jan-889.555 221-Feb-889.741 232-Feb-889.622 243-Feb-889.643 254-Feb-889.684 265-Feb-889.755 278-Feb-889.931 289-Feb-889.852 UK interest daily [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
In my current worksheet, IF(0 = "CS") returns TRUE, but on any other file this same argument returns FALSE. The cells' formats are both general. I want it to be FALSE.
View 2 Replies View RelatedI'm trying to do a formula that references a cell and returns a different result dependant on the number in the cell being referenced.
For example I've said if A1 has a 3 in it then put the word TEST as the result, plus if it has a 4 put the word RESULT.
What I wrote as my formula is as follows-
=IF(A1=3,"TEST")+IF(A1=4,"RESULT")
It works fine when I only use one result but goes wrong when I add two. If I change the words I want to show to numbers it comes up fine but with words it just returns a Value error.
I have a column of values in C and a column of values in A. I have a cell in C24 that returns the largest value in C1:C20. I would like to have cell C25 = whatever is in the equivalent A column cell across from the value found in C24. I was thinking an IF THEN statement might do this?
View 4 Replies View RelatedI wrote an IF AND formular to display "Yes" for a cell with zero. but when the cell is also empty, it still returns a "Yes" instead of empty.
this is the formular:
=IF(J2=3,"Yes",IF(AND(E2="",I2=0),"Yes","No"))
when I2 = 0 it returns Yes
Also with I2 = "", it still returns "Yes" instead of "No"
My company hires out equipment and we need to keep track of where a piece of equipment was at a given time and who to charge the equipment to for a particular week or month.
Each piece of equipment will have a separate sheet, which will list all of the hire contracts which have been placed on that machine:
Column B: Hirer name
Column C: Contract start date
Column D: Contract expiry date
Then there will be a main sheet (Summary) which will have all equipment listed, and all of the chargeable dates listed (see example below)
Week 1 ||
Week Commencing (B6) |Week Ending (C6) ||
25/11/2013 (B7) | 1/12/2013 (C7) ||
I want to add a Box underneath each piece of equipment on the main sheet that will show who to charge to. For example, underneath Week 1, I want it to show who the hirer is based on whether the Week Commencing to Week Ending dates fit within the contract start and expiry dates.
I have come up with a formula that almost works, but I can only get it to refer to a single cell in the equipment sheet. As soon as I try to get it to refer to all columns, it just automatically comes up with 'not on hire'.
This is my formula: =IF(AND(('Equipment1'!C14<='Summary'!C7),('Equipment1'!D14>='Summary'!B7)),('Equipment'!B14),"Not on hire")
I am looking for a formula that returns the cell address of the last cell > 0 in a range.
in the example: A1CLA23 8
4546557528
the result should be A7.
See attached formula:
"=INDEX(DATABASE.xls.xlsx!$AT$5:$AT$2001,MATCH(AR10,DATABASE.xls.xlsx!$O$5:$O$2001,0))"
Cell AR10 is my target cell and then there are 15 other cells that populate when the correct information is put into cell AR10, but if one of the other cells does not have any information in it, it returns a "0" (zero). I am trying to get the cell to show blank as when I print I don't want a "0" (zero) in every cell that has not got any information.
2 x cells are showing telephone numbers, 1 x landline and 1 x mobile - sometimes we don't have a landline number, so I want the cell to show blank not "0" (zero)
The cell format is set to "text", but I have tried setting it to "general", "number" and finally settled on "text", but all return "0" (zero) if we don't have a number for them.
something that looks like =CELL.MIN(reference)
View 3 Replies View RelatedI have a small problem where I 'm using an input box to enter a name of the sheet & the date in a cell, However when it asks the user to enter a date it only shows a number as the date? For example I enter 12/31/2009 it places 40178 in the cell?
View 2 Replies View RelatedI'm using the following formula, and keep getting a zero when the cells in D4 are blank when I simply want exactly whatever is in D4 to be shown...
=IF($B$2="Alness",Alness!D4,IF($B$2="Amsterdam",Amsterdam!D4,IF($B$2
="Atlanta",Atlanta!D4,IF($B$2="Budapest",Budapest!D4,IF($B$2
="Dalian",Dalian!D4,IF($B$2="Debrecen",Debrecen!D4,IF($B$2
="Durban",Durban!D4,IF($B$2="Edinburgh",Edinburgh!D4,IF($B$2
[Code] ..........
My .find function is only finding the 2nd value in a cell example If i look up the term " HOSE"
5/8 hose water Will return
5/8 heater hose will not
Basically what I am making is something I am calling a "what" button. It queries my database and returns all the part numbers with the term i put in and i thought it was working fine till i was testing it, did i do something to select this? I've tried xlpart and xl whole. Neither is working.
Here is the code below
Sub COPYPARTNUMBERINFO()Dim parttofind As String
Dim partcell As Range
Dim partref As Range
ActiveSheet.Unprotect Password:="*******"
Range("t6:T10000:u6:U10000").Select
Selection.ClearContents
parttofind = InputBox("What is the number or discription")
[code].....
The following formula: =IF(ISNA(VLOOKUP(C11,$D$139:$E$149,2,FALSE)),"",VLOOKUP(C11,$D$139:$E$149,2,FALSE)) (located in cell D11) looks in cell C11 Baseball Players Shirt Numbers then looks in the range $D$139:$E$149 to find the Players Name and place the Players Name in cell D11, but in this case cell D11 is blank. The table ($D$139:$E$149) is laid-out as follows; no headers, Players Names are in column 1 (Column D) and Baseball Players Shirt Numbers are in column 2 (Column E). The Baseball Players Shirt Numbers are formatted General in both the table and in cell C11. I can't figure out why cell D11 returns a blsnk answer?
View 9 Replies View RelatedI have a VLOOKUP formula in a cell that refers to another cell that has a formula in it.
When I type the actual numerical result (rather than the formula) in the formula cell, the vlookup works. When the formula (that equals the same number) is in there, the vlookup cell is returning #n/a.
I have a normal VLOOKUP of this loookup range:
A 1
B 2
C 3
D 4
=VLOOKUP(T14,U6:V9,2,TRUE)
If the value in T14 is in the lookup range, I get the expected value returned. If the value exceeds the vlaues in the lookup range (e.g. I enter "E"), I get the last value in the range (4). How do I get it to return a blank cell if the entry in T14 is not found?
I have a simple formula subtracting one cell from another using =SUM(XX,-XX). When I click on fx and bring up the function arguments box, the formula result is displayed correctly in that box. However, the cell containing the formula will only display a zero. I have tried reformatting the cells to no avail. I have also tried getting a result using =XX-XX and that does not work either.
View 10 Replies View RelatedIs there a formula in Excel that returns the active cell address (ie dynamically). Excel updates the activecell address in the Name Box dynamically as you make a selection but I cannot find a standard formula to access it. I know I can achieve this with code using the selection-change event but this action then disallows use of the Undo button - which I specifically want to avoid. Perhaps there is an add-in available?
View 9 Replies View RelatedI need some direction on how to proceed with dismantling an address cell. I have a workbook that one field is an address label field. What I mean is the entire address is entered in one field just as it would appear on an envelope. I need some suggestions on how to break this apart and create individual fields for the individual parts.
View 6 Replies View RelatedI'm trying to create a lookup formula where it matches the beginning of words and returns the value of a cell I choose. This is my layout. In Workbook1 in column E I have a list of medicine names which i'm putting in from personal medical lists. These names are not "complete", i.e. they aren't the exact names of the medicines. In workbook 2, I have a sheet with the exact names and corresponding codes of the medicines. I want to return the code of the medicine. The beginning of the names of the medicines are the same, so I want to lookup the the X first letters of the medicines I write in manually (Workbook1 column E) and find it in Workbook 2 column B and return value of Workbook2 column A for that medicine (on the same row).
View 5 Replies View RelatedI am trying to link the data from one cell to another. My destination cell has the formula
[=IF('Request Form'!A39="","",'Request Form'!A39)].
Which works great for values in the reference cell that do not contain carriage returns, which is possible. The problem I am running into is that if the reference cell contains a carriage return the destination cell just ignores it and crams the lines together for display purposes. Is there a way/formula I can use to force excel to display 'exactly' as entered, in cell returns and all?
I'd like to add items on a UserForm1 ComboBoxes in the correct order but I can't. That's because with the code below, in ComboBox6P1 the items are added with mixed order:
For Each thing In .Range("AC6", .Range("AC65536").End(xlUp)).SpecialCells(xlCellTypeConstants)
If Trim(ComboBox4P1.Text) = thing.Value Then
For Each aNew In .Range("AD6", .Range("AD65536").End(xlToRight)).SpecialCells(xlCellTypeConstants)
If aNew.Row = thing.Row Then
ComboBox6P1.AddItem aNew.Value
End If
Next
Exit For
End If
Next
I should add items in ComboBox6P1 in order -> AD6, AE6, AF6, AG6, AH6, the rest are empty cells. Instead of it adds AF6, AG6, AH6, AD6, AE6. When I change .SpecialCells(xlCellTypeConstants) to .SpecialCells(xlCellTypeVisible ) it adds it in the correct order but with another 200 emtpy cells in the ComboBox6P1. The format of the cells is General.
Is it possible to get Excel to highlight a cell when the IF formula returns a TRUE value? (Using MS Office 2003)
View 2 Replies View Related