In my current worksheet, IF(0 = "CS") returns TRUE, but on any other file this same argument returns FALSE. The cells' formats are both general. I want it to be FALSE.
View 2 Replies
I've been asked to adjust some thing with a worksheet someone else created. On the sheet labeled "Criteria" there is a list of dates and some formulas that use these dates. I can't figure out why the result of the formula is a number, i.e "0"; I thought it is supposed to return "TRUE" or "FALSE". If I insert a new sheet, within the same workbook, and insert the same formula, I get "TRUE" or "FALSE". For some reason, the "Criteria" worksheet doesn't return "TRUE" or "FALSE", it returns numbers. I just need to know why this is happening so I can replicate it in the new workbook I'm creating.
View 2 Replies View RelatedI have a worksheet called "Raw Data" where in columns J, I and G contain values. I would like to write a formula whereby if all 3 conditions are met, it will count the number of values found in column C.
I've tried to write an IF statement but it just returns FALSE, despite the result being true. Need the right combination of IF/AND statements that would do this?
=IF(AND('Raw Data'!$J:$J="Maintenance",'Raw Data'!$I:$I="Open",'Raw Data'!$G:$G="1-2008"),COUNT('Raw Data'!$C:$C)). I've tried to attach the workbook, but there's a problem with uploading attachments I think. Sorry if my explanation is unclear.
I have calculated the t values then i have three tables for 3 confidence levels, 0.01, 0.05,0.1 in which I compare the t value with the value from the
t-test table. If the t value is larger it returns a 1, if not a 0. This works fine.
To summarise the information I have a final table which I wish to return the highest significance of the given t value.
I am using this
=IF((G53=1),0.01,(IF(G44=1,0.05,(IF(G35=10,0.05,"none")))))
the problem I have is it always returns 0.01 even if g53=0. If i remove the formula from g53 and replace it with a 0, it returns 0.05 instead (even if g44 is retruning a 0).
I have considered copy paste values and doing this but that rather removes the automation aspect of the spreadsheet if I need to make adjustments.
if Statement A: =IF(M4>$B$17,0,LOOKUP(M4,$AA$20:$AB$29)*$B$15/12) works very well
if Statement B: =IF(M4>$B$17,0,LOOKUP(M4,$AA$36:$AB$44)*$B$15/12) works well too
now I am trying to say
=IF('Input Page'!B36="yes",(IF(M4>$B$17,0,LOOKUP(M4,$AA$36:$AB$44)*$B$15/12),(IF(M4>$B$17,0,LOOKUP(M4,$AA$20:$AB$29)*$B$15/12))))
Basically, if B36 is yes, use If Statement B, otherwise IF Statement A. If I write Yes, I get a "Value" error, if I change the yes to 1, I get a FALSE error.
I have a IF statement like this:
If (Range("D29").Value > 0 Or Range("e29").Value > 0) Then
D29 is an empty cell and E29 is zero. The IF test returns true. Does having an empty cell make it non-zero for an IF test?
I've written a sumproduct formula, which does what I want it to do; but it returns a zero in false condition, instead of a blank. I've tried several things, but don't seem to be progressing very far. Here's the formula that I ended up with.
View 9 Replies View RelatedI have some problem with my data here. I have created a formula to compare the numeric value between the column. I want to have the results in the column but the results I have is wrong. Did i did something wrong with the formula?
I wanna compare the value from A2 and C2, B2 and D2. If the results is correct, then is will display true value in e2 else will display false value in e2.
when i compare 2.3oz and 2.25oz, the value displayed is true which is wrong, it should display "false"
I have attached the file here...
The function below only returns a true value for cells with a month value of September, but not those with December, March or June. Each cell in Row 1 contains a month. A1 = 9/1/2009. B= 10/1/2009 and so on.
View 2 Replies View RelatedIs it possible to get Excel to highlight a cell when the IF formula returns a TRUE value? (Using MS Office 2003)
View 2 Replies View RelatedI have a nice case to prepare and need weekly riskfree interest returns on the UK treasury bond. Right now I have daily returns and want to convert them into weekly. The problem is, weeks do not always contain five trading days. How can I turn my data into weekly average riskfree interest returns?
******** ******************** src="*********>*********>Microsoft Excel - UK interest daily.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA1=ABCD1DateInterest rateweekday 24-Jan-889.871 35-Jan-889.992 46-Jan-8810.053 57-Jan-8810.094 68-Jan-8810.135 711-Jan-8810.051 812-Jan-8810.072 913-Jan-8810.283 1014-Jan-8810.114 1115-Jan-889.985 1218-Jan-889.871 1319-Jan-889.962 1420-Jan-889.913 1521-Jan-889.864 1622-Jan-889.715 1725-Jan-889.71 1826-Jan-889.762 1927-Jan-889.693 2028-Jan-889.564 2129-Jan-889.555 221-Feb-889.741 232-Feb-889.622 243-Feb-889.643 254-Feb-889.684 265-Feb-889.755 278-Feb-889.931 289-Feb-889.852 UK interest daily [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
I am trying to Sum lines of info with "True or False" and "Yes and No". I would like to assign 1 to True and Yes and 0 to False and No when I total the rows. Never tried this in Excel, on Lotus and the formula does not work. I can find and replace, but I would like to be able to use a formula.
View 2 Replies View RelatedI am having trouble with my macro. I have attached excel sheet for reference.
Basically, I want a Macro that Looks up columns B & C of current sheet and matches it with table in the charges tab, and then returns hourly pay in column D.
I have created the macro but it's giving me Run time 1004 error.
Also, my formula is incorrect. Maybe that's why my macro isn't working?
2WayLookup_Macro.xlsm
I have a range from B20:Z520. I would like to copy the entire row B:Z if Z returns "1", with numerous rows having "1" To be specific, I would like it to be copied to N6 onwards. The active worksheet is named "Dashboard"
View 3 Replies View RelatedI have a file created in Excel 2003 that uses a vlookup to reference another file, also created in Excel 2003. The function returns VALUE when the referenced file is closed. I get the VALUE error whether or not I update links upon opening the file. If I open the source file, the function calculates properly.
Here is the formula when the referenced file is open:
=VLOOKUP(A38,'[June Scorecard confirmation.xls]VPSC Summary'!$C$10:$F$22,4,FALSE)
The full & correct path appears in the formula when the referenced file is closed.
Columns C, D & E in the referenced range contain text, column F contains a Sum. This file is linked to another file, also using lookups. The linked area in this file works without problem, but it is a precedent to the calculation in column F.
Both these files reside on a network in subdirectories of the same logical drive. I am using a laptop that briefly had Excel 2007 installed on it, but was wiped clean before it was issued to me.
I need a macro that runs through the cells on a sheet and removes all carriage returns. The carriage returns appear as small squares amongst the text (they come from a CSV file).
View 9 Replies View RelatedI have a worksheet where I have around 300 rows, each with 7 columns. What I want to do is add a checkbox to each column. I plan on setting non-applicable checkboxes to mixed status and locking the worksheet. I will unlock applicable checkboxes and sumif or countif their value according to row-based scoring, for example, each checked checkbox represents a value of 3. I do not know VBA and have chose to use the form control checkboxes rather than ActiveX.
I believe that a formula for this would be something like: =SUMIF(B1:B3,True,"3") or =COUNTIF($B$1:$B$3,True)*3
I am wondering firstly if I have that right and secondly if there is a way to stop my checkboxes from displaying labels. Currently, if I click on one it displays True behind the active checkbox. If I uncheck it, it displays False.
I'm trying to use an "IF" statement to look at a date in a cell and if it matches the criteria return the information from another cell. I have tried several different ways and constantly receive an improper "FALSE". Attached is a simplified example. I'm sure it's a simple soultion.
View 4 Replies View RelatedIs there another formula that I could use that would return YES or NO instead of TRUE or FALSE? This is the formula that I am currently using.
=COUNTIF(BG_WADDRESS,D2)>1
I guess the answer for this is simple but can't find the answer.
AB1FALSE IF TRUE THAT A4 = TEST12TRUE IF TRUE THAT A4 = TEST23FALSE IF TRUE THAT A4 = TEST34TEST2IF ALL ARE FALSE = ""
Excel tables to the web >> Excel Jeanie HTML 4
In Column A I have the following values below.
Y
Yes
N
No
Questions how do you created a formula, Example If Cell A2 = Y or Yes Cell B2 will be 1, if not then 0.
Currently I was successful in writing this formula =IF(BB2="Y","1","0") but this formula only returns the value for Y, not Yes
I am using the following code in my Macro
Application.ScreenUpdating = False (I set it to "True" at the end of the sub)
But I can still see Excel changing tabs etc.
when you type True into a General formatted Excel cell Excel returns TRUE. This value cannot be formatted to a 1 (or a -1) by applying a different format. Thus, does Excel have a boolean data type? Or is it something else like a numeric value that for whatever reason is not receptive to format changes.
View 9 Replies View Relatedcreated my 'IF' function with the 'True/False' statements, but i am wanting to have yes/no instead and i cant figure out how to do it.
View 9 Replies View RelatedI am currently looking at the workings of a spreadsheet designed by someone else.
Within this sheet, a cell has the formula that , once broken down, equates to:
=100*TRUE (Cell returns a value of 100)
And another that equates to :
=100*FALSE (Cell returns a value of 0)
Am I correct in thinking that TRUE always equals 1, and FALSE always equals 0? I think this is right, but just need someone to confirm.
I've done a check box on excel (ActiveX) which then enters True or False when I tick or untick it. Is there any way which you can change the True/False words to something else?
For example, if the box was ticked it would enter "Electric" instead and "N/A" if the box was unticked?
On sheet 3 column d i have a vendor number. I am trying to create a formula in column M (same sheet) that will say "True" if the vendor number in column d is also listed on sheet 2, column A (Rows 2-148)
View 2 Replies View RelatedI've got a mega excel sheet right now with multiple people making updates to it on a daily basis. As such I am trying to find a way to output various totals in a separate static table which i can grab at any point and be confident numbers are correct.
The problem, firstly I cant figure out how to have multiple true false formulas checking the sheet from 1 cell. i.e "Check column B True/False for RestrauntNameXYZ + Check column E for true/false GroupABC + check column G for true/false Lunch"
and then
Calculate sum of column A for all rows which above combinations of true/false checks spit out.
I have a list where from which a summary is made but i need true / false thru formula once it is confirmed that it is reconciled with main data.
I have attach a sheet and explain what i needed in red highlighted.
Book1.xlsx
I have numbers from -50 to 50 going down column C. In column D, I want to enter a formula which will convert each number to a TRUE or FALSE. How do I do that?
I believe 1 = TRUE and everything else = FALSE, but I would like to know how to get that with a formula.
