I am trying to do some analysis on montly bank account data. To do this I need to take the bank statement information for the month and put it into a table that shows every day of the month (see attached example).
I am currently doing this manually but I'm sure there must be a smarter way of doing this.
My company uses financial analysis software to evaluate data on a monthly basis. The software has a report writing package that is similar (but not exactly like) Excel. There are 2 functions of this report writer that I would like to find out if
Assume A1=4 and B1=5 (but the data may vary in the future). In C1, I want an green up arrow if B1>A1. If B1
In cell A2 on Sheet 1 = January. On sheet 2 in cell A2 I need it to = February, On sheet 3 in cell A2 I need it to = March, On sheet 4 in cell A2 I need it to = April, etc.... How can I do this with a regular text formula, not VBA coding.
View 7 Replies View Relatedin excel, is there a place called data analysis under tools? im an exchange student in sweden andthe work that teacher gave me is half swedish and half english.. im looking for histogram there.
View 3 Replies View RelatedI’m currently pulling data into two columns labeled “Monthly” & “Non-Monthly” respectively. They indicate work orders with a frequency of “Monthly” or “Non-Monthly”
The Monthly data is obtained using the following formula:....
i want to run data analisys(Rank and percentile) on each row in my sheet and put the results on a new sheet
(the reuslts are 4 rows ) My problem is some how the command of the run analisysWon't run the command
kStop = . Cells(1, Columns.Count).End(xlToLeft).Column
Sheets.Add
ActiveSheet.Name = "Analisys_Results"
Sheets(" Total time data").Select
Var = 4
Var1 = 8
For ILoop = 1 To kStop
If (ILoop > 1) Then
Var = Var + 4
Var1 = Var + 4
End If.....................
Data Analysis . I have 7 tables gathered in one spreadsheet but in seperate sheets. Tables have the same columns but different data baceause they come from different locations. Now I would like to create pivot table to combine data from all 7 tables. I read a little and I got to know that relationships is needed between the tables but I can't create it because I don't have unique data in the table. Usually tables consist repeating names, locations, some numerical data.
For example every table consists worker's name. I create pivot table from one of 7th starting from worker's name in row field and put some data in value field. Then I add another workers from another table. I can do it but when I put in row field I have workers from second table under those from first one. And of course data are badly calculated. I would like to have all workers in row field with proper data. It means one column with all workers from all 7 tables an then some their data
I know I can copy all of them into one big table and then create pivot table but this is solution what I wanted avoid. I know it will work but these data can change from time to time and it will be very hard to maintain spreadsheet. When data will change I will have to copy manually .Is there any solution to create such a pivot table from multiple tables sources but with the same column structures?
For my thesis I collected data of football players. I have the data in an excel file, but it is unstructured. Due to the nature of the dataset, I don't want to sort it out by hand. The result should be that the dataset is ready for statistical analysis. I have three categories, namely; Player_Performance, Player_Profile and Transfer_History. I will discuss them now.
Player Performance
In this excel file the performance data of the player is gathered. As you can see, the player ID and the player name are a row above the performance data in different competitions. This data should be on the same row. Player ID, Name and then the performance data. How can I achieve this?
Player Profile
The player profile file is the easiest. I want to delete the double information. Some players are 2 times in the file. I want to delete every row which doesn't start with a player id. I also want to remove player id's which arent followed by player information.
Transfer History
The transfer history is the same as player performance. In the first row you will find the player id and name, and beneath are the different transfers. I want to put every transfer in a row of their own. The row should start with player id, then name and then the transfer. So it is possible that one player id will be on more rows.
In the attachment I put the files as they are and three files of how it should look like.
Player_Performance_SMALL.xlsx
Player_Performance14_EXAMPLE.xlsx
Player_Profile_EXAMPLE.xlsx
Player_Profile_SMALL.xlsx
Transfer_History_EXAMPLE.xlsx
I need to extract for each individual dive: Onset/start of dive (when the whale has completed its surface interval and begins its descent)
Rate of Descent (meters/second)
Onset/start of bottom phase (the whale has stopped descended and begins the "foraging" phase of the dive...not necessary the deepest point reached)
Number of lunges (you can see these if you plot the data. They are lunges at depth indicative of feeding behavior)
End of bottom phase (begins to ascend)
Rate of Ascent
End of Dive (surface intervals begins)
I've attached a brief sampling of the data in case you're curious.
Over the years I have identified these points through visual inspection of Excel charts. It's very easy, but extremely tedious and not at all efficient. I am interested in expediting this whole process and am more than willing to learn programming (i.e. visual basic or the like)...but only IF it is the best approach for this application.
I have attached two dives worth of data, so we can see what the data looks like. Each data set can contain from 1 to 8 hours worth of data.
I have student demographic data, then I have to track how each student did on each question, but each question also corresponds to a reading standard and I need to pull two pieces of info from that. How they scored on the assessment (# of answers correct), and if they missed a certain standard twice or more (There are 4 instances of StandardA in the test and they had wrong answers on 2 or more of them). I have the solution to the first part. I entered the results of each question as a 1 for correct and 2 for incorrect then did a countif and only counted the 1s. I am stumped on getting an analysis of how each student did on the indicators. Since the indicators can occur more than once, generating a pviot table doesn't work in this instance, it'll count of 1s and 2s for StandardA, StandardA2, StandardA3, etc. and not the counts of 1s and 2 for all instances of StandardA.
Example:
What I want:
For student Bob - Number of times he answered incorrectly StandardA, StandardB, StandardC, StandardD, etc.............
Each month we receive an updated budget which includes info for every month of the budget year. I want the user to be able to select the column (which relates to a month) that they want to use for the analysis. I will use the data in this column only for analysis. How can I do that?
View 3 Replies View Relatedthe sheet is very long and monitors the sales activities of each individual every day extending vertically down the sheet until the present day.
my first priority was to get the information recorded but now i am wanting to use it.
how would an expert arrange this data to make analysis easier going forward?
ultimately i will be wanting to look at individuals, groups of individuals, certain types of activity etc within various time periods.
I have a table of yearly totals for the amount spent by x. I also have a growth rate for each month so for example in 2001 in jan the growth rate might have been 0.3% and feb 0.5% What I want to do is for each month based on the growth rate and the total produce a value for each month which sum to the total amount. It's also important to note that it restarts each year.
Link for excel file is here: [URL] ...........
Below are the weekly closing prices for a stock market index. I'm looking to use conditional formatting to highlight in green "buy" signals and in red "sell" signals.
Buy Signal: If the index rises 4% above any previous low point.
Sell Signal: If the index falls 4% from any previous high point.
DateAdj Close
3/10/201472.16
3/3/201473.55
2/24/201472.83
2/18/201471.92
2/10/201471.43
[code].....
In the above example a Buy Signal is generated on 1/13/2014 because the market closes 4% above the low of 68.24 on 12/9/2013.
[URL]
I'm trying to write a macro that will analyze data from one spreadsheet and do a regression. The information I want to be output on the same sheet. I tried to use the record function, but I got an error. It said "Run-time error '1004': ATPVBAEN.XLA could not be found. The code read:
View 2 Replies View RelatedI am having issue setting up an analysis page for a report that I have. I am trying to find out for each individual what are the currently working on, completed, and the average time it took to complete. I have the data but it is in the following format:
NameStartedDone
Julie24-Jun27-Jun
Tom24-Jun
Julie24-Jun27-Jun
Julie24-Jun
Ken24-Jun27-Jun
The way I need the data appear with the name above with the data below as shown below.
JulieTom
Working11
Complete2-
Avg Time3-
I am having issue because the data isn't setup in a column format. Also the data list is constantly growing so I want it to be something that can update itself so I am not constantly updating the report.
Is it easier to use the Solver Add-in than to create your own data analysis code? We are planning to design a scheduler for around 12 technicians in our contact center (doing phone support).
View 5 Replies View RelatedI've used the following formula successfully to pull data from multiple sheets and provide the total on an analysis worksheet. Example of worksheets and formula.
=DSUM(INDIRECT("'"&A2&"'!D:D"),$B$1,INDIRECT("'"&A2&"'!D:D"))
Example of one of the individual sheets holding original data:
A
B
C
D
[Code].....
Example of what I want to see using the Transpose formula (Analysis sheet):
=TRANSPOSE(INDIRECT("'"&A2&"'!C:C"),$C$1,INDIRECT("'"&A2&"'!C:C")) (My theory that currently doesn't work. I'd like to be able to pull data across worksheets and yield the transposed data into the corresponding row of the same merchant row.
A
B
C
D
[Code].....
i am preparing my self to enter the microsoft Excel 2003 Exam.....
one of the mentioned points in the preparation list is: (Perform data analysis using automated tools) how to use the automated tools? and if possiable to get a file that i can apply these tools on it
I have a data base for a stock.
It goes like this:
Date Price
Date1 Price1
Date2 Price2
How can I do an analysis of the:
Worst 12mths performance (like how much is the maximum a stock drop in any rolling 12mths period)
best 12 mths performance
I want to set up an automatic sensitivity analysis such as the one shown in example.doc attached, using my model that is attached (inventory model. zip). Going horizontally in the sensitivity analysis, I want to show 2H (3Q and 4Q) Sales Growth (30%, 35, 40,45,50,55,60%) and vertically I want to show 2Q Inventory Growth (50%, 55%, 60%, 65%, 70%, 75%, 80%) and I want the inside data to return sales/inventory spread ( multiple). Basically it would divide the dollar growth in sales in 2H by the dollar growth in inventory and return a multiple. Is it possible to set this up automatically using the data that I have here?
View 2 Replies View RelatedI'm trying to analyse data and summarise it by date (greater than 60 days, and between 30 days and 60 days), by department using the first two digits of department codes, and where there are multi-line order numbers.
View 4 Replies View RelatedWe are running Office 2010 part of Office Professional Plus 1010 (corporate install). We have added both the Analysis Toolpak and Analysis Toolpak - VBA to the add-Ins and have the button on the toolbar, however when we click on the button, we don't get the popup window allowing the user to pick the analysis tool they want to use. Have tried this on a number of PCs (we all run the same version) and it doesn't work on any of them.
What we have to do do make this toolpak work?
I've attached the worksheet i'm working on so you can have a look. Basically, my problem is that every morning, data is pulled into the sheet in this form. The bosses want to be able to manipulate the data in Excel as easily as possible. For example, some would like to have the sum of HDD for a specific period of time for all weather stations, while others would like to have the daily values for one specific weather station.
To give you an idea of their skill level, I think that pivot tables would be too hard for them to do, and I personally dont think it would be flexible enough. Is there some way that I could write a VBA code and have UserForms that they could easily click and get the weather station they would want, the dates needed, and whether they want the HDD to be summed?
I have 12 observations per variable over 2013. At the end of each month I gathered the average value of X of said month. What I want to do is convert these observations to a list of weekly observations, where each week in January gets the value of the January observation
Example:
Month123456789101112
Value 2345678910111213
And get it like:
Week Value
1 2
2 2
3 2
4 2
5 2
6 3
7 3
and so on.
Since I've got a lot of variables I'd like to use some kind of formula.
I have a column line chart to which I add data monthly and then have to manually update the "source data" to reflect the added data on chart. This is a rolling graph, which mean that I have to remove data for one month(from last year) and then include the new month's data. Is there any way on automating this process...like a macro or something, so once I add the data excel automatically removes one month of old data and make changes to include fresh data. Eg Currently chart is based on data from A2:F2 and I add new data to cell G2. I need something which automatically update the source data to cell B2:G2.
View 4 Replies View RelatedI am trying to convert quarterly data to monthly
The quarterly data columns go: Mar-14, Jun-14 etc
The monthly data columns goes Jan-14, Feb-14 etc
I am trying to use a vlookup and match formula but as you will see in the attached file it is only working for those months that are labelled in both data e.g. March 14, June 14
Is there a formula that will pick up for example that January and February numbers should be drawn from the March 14 quarter, April and May from June quarter etc?
I have a table which has the following columns:
Date - Data1 - Data2 - OtherData1 - OtherData2
I came up with some formulas to count my data monthly. I have 12 tables with this kind of formula in it:
[Code] ....
Where B12 is the year and A213 is my month number. My first try on the "date filter" looked like that:
[Code] .........
And it wasn't working so I thought it was because the 31 wasn't a good idea for non-31-days-months but none of the formulas above are working.
(BTW, IDK why it's not working but I have data in my table for months 10, 11 and 12 and the only calculation tables that are calculating data are the ones for months 9 and 10. The results are the same in these two tables and are counting all my Table1[Data1] and [Data2] (the count is not monthly))
Basically i have month end data ranging from 31/01/2000-31/01/2009 with a value attached to each. I need to convert this data into a daily series with the month end value being the same throughout the whole month. I've been playing around with excel for a couple hours tonight
View 9 Replies View RelatedI believe there is a way to summarize monthly data with the month in rows and the heading across columns. The goal is to have a formula summarize the data with Q1 through Q4 in rows and headings across columns and vice versa. Sample data attached.
Sample.qrt.data.jpg