I currently have a table with 21 columns and 30 rows for inputting data. It would save some time if the cursor could move to the start of the next row when the last column was reached.
View 2 Replies
I have a excelsheet that looks like this:
Column A | Column B | Column C
Los Angeles | Fire Dept | 3
Los Angeles | Health Services | 12
New York | Fire Dept | 8
New York | Health Services | 22
New York | Internal Services | 100
New York | Public Works | 7
Chicago | Health Services | 15
Chicago | Public Works | 56
Chicago | Social Services | 4
And I am trying to make it look like this:
Fire Dept
Health Services
Internal Services
Public Works
Social Services
Los Angeles
3
12
New York
8
22
100
7
Chicago
15
56
4
I have set of data Pasted in 4th row, in the top row 44 columns values assigned i want move data from set of data to different column among these 44 columns
Like "Service Order ID" is 1 column in set of data ,it move to second column of top row
Some of column need to delete. (Service Order Type,Service Order Description,Created By,Status,Contact,Expected Delivery Date,
Creation Date,Priority,Net Value,Currency,External Reference,Reference Date)
I want Get output result in same sheet (Actual).
I am in need of restructuring a spreadsheet of addresses for mailing purposes. (I tried to find something similar answered previously, but nothing seemed to work for me.)
I have attached a small example spreadsheet below, but our spreadsheets can be hundreds or thousands of rows in length.
I need a macro that will look for the "PO Box" addresses under the column headers named "ADDRESS2" and "ADDRESS3".
The PO Box addresses will need to be moved under the column header "ADDRESS1" within the same row.
It will need to overwrite the text that is already under "ADDRESS1" and delete the text from the "ADDRESS2" and "ADDRESS3" columns - UNLESS the text in 'ADDRESS2" is a PO Box AND "ADDRESS1" begins with "c/o".
If the data in "ADDRESS2" or "ADDRESS3" is anything other than a PO Box it will remain the same. As will "ADDRESS 1".
Basically if there is a PO Box it needs to be in the column named "ADDRESS1" and overwrite anything else that was there. The exception will be for PO Boxes that are in c/o someone else, the PO Box will then need to be listed in the column directly after the column that has c/o.
If the c/o exception will be too difficult the code could just highlight those scenarios and we could fix them manually. We usually do not have a lot of them, but enough that we need to be mindful of them.
The different scenarios are listed in my sample spreadsheet.Also, the code will have to use the column header names in row 1 because those headers are not always in the same column.
I have two different Excel reports and the data needs to be copied from each column on one spreadsheet and pasted to the bottom of the equivalent column on the other spreadsheet.
So, is it possible to get a macro that will copy the data from one column then paste it to the next free cell in the column on the other spreadsheet.
If I could get some code to do one column then this should be enough to get me started and I could apply this to the other columns I need to copy.
I am trying to move a column of numbers based on the information in another column. I've been looking for about a week and find macros that are close but not quite.
In one column it reads Mobile, Home, or is blank. If the number is a Mobile (column R), the area code (column P) needs to move to column S and the phone (column Q) needs to move to column T and the primary phone (column R) needs to move to column U. Home and blank cells remain as they are.
area (P)
phone (Q)
primary phone (R)
col S
col T
col U
[code]....
All info goes to the master inventory and then if some enters an amount for respray then it is transferred to the respray sheet. when it is transferred to the respray sheet it put the date in Column A and then put 3 days later in Column B.
Every day it will change and the date in A1 changes to tomorrow but if another item is enter as having resprays then it transfers to the respray sheet and will bump down in column C but Column A stays the in the same spot.
I need Column A and B to move up and down if something in Column C moves up or down and it would be nice to always have the oldest date at the top.
I have attached a sample spreadsheet – what I want to do is insert a column before the current column A and move the current column D in to it and auto fill for every non blank cell in column B. Also, there are different values in column D such as “B03” ,”B41” etc – so for example, it should auto fill B03 until it comes across either a blank cell in column B or it comes across a “B41” and then it should do the same until it comes across a “B42” or a blank cell again. This needs to continue till the end of the report.
View 2 Replies View RelatedColumn A
20
Column B
10
8
6
4
2
Column C
3
Right now I want to count the rows (the value is under column C) summing in column B until the sum reaches the value in column A. So column C is 3, because 10 + 8 + 6 => 20. I've tried
[Code] .....
But it doesn't work. Are there any other ways of performing VBA for this?
Attached is a snip of my workbook : VBAHELP.PNG‎
I have a value in cell P1 and is always -ve.
This value is calculated by some tedious calcualtion in some other part of the sheet.
By entering value in Cell P2, the value in cell P1 will progress towards +ve number.
What i want is a formula or Macro to increment the value in Cell P2 by 0.01
until value in Cell P1 becomes +ve...
Below is the example of my manual calculation.
When i have
P2=0 P1=-23.58
P2=0.01 P1=-14.78
P2=0.02 P1= -9.30
P2=0.03 P1= -2.92
P2=.04 P1= 1.05
Since i have achieved P1 to be positive, calculation should stop with value in P2=0.04
I have to do this for 31 column and hence manually doing it takes long time
I am trying to create a special workbook for my asphalt project. After inputting all of the day's truck information, I want to add up the total tons and then for the program to highlight which truck puts the total tonnage at or slightly above 500 tons. I'm not sure if "isolating is the right term to describe what I wish to do or not, but my whole workbook will be based off of similar actions like what I'm requesting. Here is a portion of my sheet:
Truck #Tonnage
1 21.93
2 22.84
3 23.21
4 24.89
5 24.8
6 25.01
7 24.88
8 24.44
9 23.14
10 24.53
11 22.03
12 22.61
13 24.9
14 24.69
15 24.85
16 24.81
17 24.82
18 22.55
19 22.18
20 24.52
21 22.49
22 24.81
And so on.....
i have a sheet called match and dates in column f and would like the rows to auto delete when 6 years old
View 5 Replies View RelatedI have a quantity column on an inventory sheet which automatically updates the available quantity based on sales from a sales sheet. But I need to know the date the quantity reached zero.
That date would always be "today," on the day the quantity = 0, but how do I make the date NOT update to "todays date" on the next day, and the next, etc. It needs to stay as the date that 0 qty was reached.
I have written a code but i can not make it stop where i want it to stop. I would like the code stop when cells(31,4).value reaches 0. Pls refer to attached sheet for a clear example.
The code is as follows
Sub production2()
If Cells(35, 4).Value > 0 Then
Cells(31, 4).Value = Cells(35, 4).Value
For j = 5 To 16
If Cells(36, j).Value < Cells(29, 4).Value Then If Cells(31, 4).Value > Cells(29, 4).Value Then Cells(37, j).Value = Cells(29, 4).Value
If Cells(36, j).Value < Cells(29, 4).Value Then Cells(37, j).Value = Cells(29, 4).Value
Cells(31, 4).Value = Cells(31, 4).Value - Cells(37, j).Value
Next j
End If
End Sub
I have a spreadsheet with time values incremented in column A.
In column K, there are numerical values that correspond to the time in column A.
Elsewhere, a specific time is chosen from which to begin the summing of the values in column K.
I need to be able to sum the values in column K until preset values are reached. Then I need to know at which corresponding time value the summing loop stops.
For example, a time of 11:00 AM is chosen as the "start time". I want to sum the values in column K until they are >= 2.000.
At that point, I need to know what the cell value was in colum A that is in the same row as the last cell value in column K.
I can't seem to do it with simple Excel functions without falling into a self referencing loop. So what I need is for a VBA loop to lookup the appropriate values in column K, sum the values, check the total, and continue the loop until the preset total is reached. Then look up the value in column A in the last row of summed values, and return that value.
Is there any code to pop up a message each time a cell value is not reached. For ex if the resulted formula in A1 is less than 0 to pop up a message "LOOSE"
View 4 Replies View RelatedI have a large spreadsheet converted from pdf whose data still appears in A4 reading format.
I need to move part columns of data from 6 columns to form 1 large column in column A.
For example, move range B8 to B76 beneath range A8 to A76 and range C8 to C76 beneath that etc, page by page working through all 270 pages !
Also need to delete unnecessary 'page headers' throughout as in rows 2-6
I am basically trying to find the first non-empty cell in a range, but I want the macro to look down columns first. In other words, I want it to look down column A, then column B, and so on. Right now I believe it is searching by rows.
With Columns("A1:D15")
.Find(what:="*", after:=.Cells(1, 1), LookIn:=xlValues).Activate
End With
how to make it search through columns then rows?
I'd like a macro that finds all cells in column C with the text "Apple" and moves all those cells values (text) to column E.
Case InSensItive.
One Caveat though, the search must continue and not stop searching until it is equal to the bottom-most row of data in column F.
I don't want this macro to search all 1 Million + Rows.
I am trying to move one column to the right each time the macro is ran. Next time it should go from columns B:B to C:C
View 12 Replies View RelatedI have the following information on the sheet named "Calculator"
01-Mar-0825510051005.0045'[test.xlsb]Product Price'!$D$256
01-Oct-09274975990.0054'[test.xlsb]Product Price'!$D$27501-Aug-10284981999.0058'[test.xlsb]Product Price'!$D$28501-Dec-10288621634.0058'[test.xlsb]Product Price'!$D$28901-Jan-11289054.00150'[test.xlsb]Product Price'!$D$96601-Sep-1129718001854.00150'[test.xlsb]Product Price'!$D$974
In column f i have the following formula {=CELL("address",INDEX('Product Price'!$D$1:$D$1014,MATCH(B2&E2,'Product Price'!$A$1:$A$1014&'Product Price'!$D$1:$D$1014,0),0))} that returns the cell address from where i want to start my sum function.
My sheet named "Product Price" looks like this:
255Mar-0839508R 45.00256Apr-0839539R 45.00257May-0839569R 45.00258Jun-0839600R 45.00259Jul-0839630R 48.00260Aug-0839661R 48.00261Sep-0839692R 48.00262Oct-0839722R 48.00263Nov-0839753R 48.00264Dec-0839783R 48.00265Jan-0939814R 48.00266Feb-0939845R 48.00267Mar-0939873R 48.00268Apr-0939904R 48.00269May-0939934R 48.00
I now require a formula in column g that will count how many times starting from the cell in given in column f it added the amounts downwards to reach the amount in cell d of the "calculator" sheet - it must thus add d256+d257+d258... until it is bigger or equal to the amount in cell d.
I want to Freeze my Header Row (A16 to T16) on my spreadsheet but I can't seem to get it to freeze. I wanted to have it freeze when that row reached the Top of the page but all I can do is freeze it and the 15 rows above it. Can one row be made to be visible at all times? I don't think so as I asked this question before but thought I would start by asking it again...
Now my workaround for that was to put the header row at the top of the page as well and freeze it. This works but when you initially open the spreadsheet it look weird because you see a header row on top and one 15 rows below it.
My question is is there a way to hide row 1 until a specific cell becomes active and then the code can undide the row? I want row one to become visible when the user gets to cell A41. Does anyone know how I can accomplish this or do you have any other suggestions for me to try?
10 12 13 12 10 11
40 30
? ?
Count values in the top row until the sum is greater than the relative value below
In this example the first ? would be 4 as 10 + 12 + 13 + 12 = 47 (greater than 40)
The second ? would be 3 as 12 + 13 + 12 = 37 (greater than 30)
I cant figure out how to do this with a formula! Custom Function needed?
I have a column that is a percentage(p%) which measures the fullness of the location(loc) that the item(ite) is in, which also has a corresponding location(loc) and item column(ite).
What I need to do is add as many items(ite) to one location(loc) as possible without exceeding 100%(p%), however if the value exceeds 100%(p%) then we need to start all over in a new location. The end result would be an unknown amount of unused locations.
If p% < 100 then add the next row's p% value, else start over with a new location. I am trying to add as many items to one location as possible, and once a location fills up, we will use the next one.
I have been given an Excel file. Upon opening it, I see that the top four rows do not move even if I scroll down. What I'd prefer is that only the first row (for column titles) not move. If I can learn the name of this feature, I'm sure I can figure out how to change the file.
View 3 Replies View RelatedI have large information scattered all over worksheet. If I want to move all data in one column "A" how can I do it?
View 2 Replies View RelatedI Have a table in Excel that current look like this:
Name 1
Item 1, Item 2, Item 3
Name 2
Item 1, Item 2
With 650+ Rows. What I need it for it to look like this
Name 1
Item 1
Name 1
Item 2
Name 1
Item 3
Name 2
Item 1
Name 2
Item 2
There are about 20 Items that could be assigned to a name, They are fixed.
Is there a way to create a macro or series of macros the car make this change, as doing it by hand is going to take way too long.
Need the formula that I will need in my macro to move to the next column (up one letter) for the next time I run the macro witout me having to manually change column the letter?
I have data in multiple columns like this:
http://spreadsheets.google.com/ccc?k...rEspkRfQWMOTUg
I'd like to move all data to one single column (like column #1)
Can someone help me out with a VBA macro ?
I need a macro that I can assign to a button so that it will jump the screen to a particular cell. I want it to select the cell in a chosen column in the same row as the cursor already was. So, if I'm in M10 and I hit the AK button, it'll jump to AK10. If I'm in F54 and I hit the AK button it'll jump to AK54.
View 2 Replies View Related
