I'd like a macro that finds all cells in column C with the text "Apple" and moves all those cells values (text) to column E.
Case InSensItive.
One Caveat though, the search must continue and not stop searching until it is equal to the bottom-most row of data in column F.
I don't want this macro to search all 1 Million + Rows.
I am in need of restructuring a spreadsheet of addresses for mailing purposes. (I tried to find something similar answered previously, but nothing seemed to work for me.)
I have attached a small example spreadsheet below, but our spreadsheets can be hundreds or thousands of rows in length.
I need a macro that will look for the "PO Box" addresses under the column headers named "ADDRESS2" and "ADDRESS3".
The PO Box addresses will need to be moved under the column header "ADDRESS1" within the same row.
It will need to overwrite the text that is already under "ADDRESS1" and delete the text from the "ADDRESS2" and "ADDRESS3" columns - UNLESS the text in 'ADDRESS2" is a PO Box AND "ADDRESS1" begins with "c/o".
If the data in "ADDRESS2" or "ADDRESS3" is anything other than a PO Box it will remain the same. As will "ADDRESS 1".
Basically if there is a PO Box it needs to be in the column named "ADDRESS1" and overwrite anything else that was there. The exception will be for PO Boxes that are in c/o someone else, the PO Box will then need to be listed in the column directly after the column that has c/o.
If the c/o exception will be too difficult the code could just highlight those scenarios and we could fix them manually. We usually do not have a lot of them, but enough that we need to be mindful of them.
The different scenarios are listed in my sample spreadsheet.Also, the code will have to use the column header names in row 1 because those headers are not always in the same column.
I have a excelsheet that looks like this:
Column A | Column B | Column C
Los Angeles | Fire Dept | 3
Los Angeles | Health Services | 12
New York | Fire Dept | 8
New York | Health Services | 22
New York | Internal Services | 100
New York | Public Works | 7
Chicago | Health Services | 15
Chicago | Public Works | 56
Chicago | Social Services | 4
And I am trying to make it look like this:
Fire Dept
Health Services
Internal Services
Public Works
Social Services
Los Angeles
3
12
New York
8
22
100
7
Chicago
15
56
4
I have some macros that will look for a certain item and then move it somewhere else on the spreadsheet. However, I can't seem to get the code right to skip over the section if the text is not found. I assume it would be easiest to do it with error handling, but the attempts I've made haven't worked.
the macro will search for the text "Name" and move everything under that column elsewhere; then it will do the same for "Date." But currently, if "Name" is not found anywhere on the spreadheet, it will cause an error and ask to end or debug.
I have set of data Pasted in 4th row, in the top row 44 columns values assigned i want move data from set of data to different column among these 44 columns
Like "Service Order ID" is 1 column in set of data ,it move to second column of top row
Some of column need to delete. (Service Order Type,Service Order Description,Created By,Status,Contact,Expected Delivery Date,
Creation Date,Priority,Net Value,Currency,External Reference,Reference Date)
I want Get output result in same sheet (Actual).
I am importing a 20 character text string (from a barcode scanner) to H2. I need to send that data to the next unused row in Column A (after insuring that no matching text currently exists in Column A-no action taken if matching data is found). I can provide a copy of the sheet, along with a description of the project.
View 2 Replies View RelatedI am trying to have rows moved from (Schedule) to (Complete) in the attached workbook. The criteria to have the row moved would be the user-selected "Status" list changing to "COMPLETE" in Column G.
I would like to have the row cut and deleted from Sheet4 (Schedule) once "COMPLETE" is selected from the list in Column G with rows below moving up. The row would then be inserted into Sheet2 (Complete) at the top of the list (Row 7) and rows would move down below the new entry. I would also like to have the formatting remain uniform (every other row fill)
I have two different Excel reports and the data needs to be copied from each column on one spreadsheet and pasted to the bottom of the equivalent column on the other spreadsheet.
So, is it possible to get a macro that will copy the data from one column then paste it to the next free cell in the column on the other spreadsheet.
If I could get some code to do one column then this should be enough to get me started and I could apply this to the other columns I need to copy.
I am trying to move a column of numbers based on the information in another column. I've been looking for about a week and find macros that are close but not quite.
In one column it reads Mobile, Home, or is blank. If the number is a Mobile (column R), the area code (column P) needs to move to column S and the phone (column Q) needs to move to column T and the primary phone (column R) needs to move to column U. Home and blank cells remain as they are.
area (P)
phone (Q)
primary phone (R)
col S
col T
col U
[code]....
All info goes to the master inventory and then if some enters an amount for respray then it is transferred to the respray sheet. when it is transferred to the respray sheet it put the date in Column A and then put 3 days later in Column B.
Every day it will change and the date in A1 changes to tomorrow but if another item is enter as having resprays then it transfers to the respray sheet and will bump down in column C but Column A stays the in the same spot.
I need Column A and B to move up and down if something in Column C moves up or down and it would be nice to always have the oldest date at the top.
I have attached a sample spreadsheet what I want to do is insert a column before the current column A and move the current column D in to it and auto fill for every non blank cell in column B. Also, there are different values in column D such as B03 ,B41 etc so for example, it should auto fill B03 until it comes across either a blank cell in column B or it comes across a B41 and then it should do the same until it comes across a B42 or a blank cell again. This needs to continue till the end of the report.
View 2 Replies View RelatedI have a large spreadsheet converted from pdf whose data still appears in A4 reading format.
I need to move part columns of data from 6 columns to form 1 large column in column A.
For example, move range B8 to B76 beneath range A8 to A76 and range C8 to C76 beneath that etc, page by page working through all 270 pages !
Also need to delete unnecessary 'page headers' throughout as in rows 2-6
I am basically trying to find the first non-empty cell in a range, but I want the macro to look down columns first. In other words, I want it to look down column A, then column B, and so on. Right now I believe it is searching by rows.
With Columns("A1:D15")
.Find(what:="*", after:=.Cells(1, 1), LookIn:=xlValues).Activate
End With
how to make it search through columns then rows?
I am trying to count the distinct times a value shows up in a column, if another column has a 2 in it.
For example:
Columns
A, B
2,P25
2,P25
3,P5
3,P6
2,P5
The results shoud be: (2) Because I only want to count the P25 one time.
I'm using Excel 2010
Formula(s) to do as explained in the attached example.
Example_formula.xlsx
I am running Win XP and Excel 2003.
I have a macro I found here on the boards written by Lenze to delete an entire row based on what is found in column A. I would like to delete any row where Col. B contains 10 or less characters and I have modified it to do so (or at least I think it does). My problem is that it takes about 12 minutes to run the macro (I have about 50k lines to run through). I was wondering if this is the fastest method or if it examines things other than just column B.
Sub Test()
Dim i As Long
LR = Cells(Rows.Count, "B").End(xlUp).Row
For i = LR To 2 Step -1
If Len(Cells(i, "B")) < 11 Then Cells(i, "B").EntireRow.Delete
Next i
End Sub
After this runs, I am left with Columns A to somewhere around AH. The columns are generally in the format of text followed by a numeric column. An individual text column has the same name through all of the rows. The numeric columns have varied values whether negative or positive.
Ideally what I would like: If a given cell (ie. C2) in Row 2 is numeric, then copy the cell to the left (ie. B2) into (ie. C1) and then delete Column B. I need this to work for multiple columns from B to C, skip D and E, and then from F to AG (and maybe beyond).
what is the best VBA code method to move Column U between Column R and S
RAW_DATA_CASH RSTU7Inv FlagPost DateFeed CodeSet8Not Queried39528L11NOMS9Not Queried39528L11NOMS10Not Queried38866L01LIFE11Not Queried38866L01LIFE12Not Queried39239A13PKRTSTAUDSUSP13Not Queried39259S13NOMS14Not Queried39262L01LIFE15Not Queried39262L01LIFE16Not Queried39262L01LIFE17Not Queried39262L01LIFE18Not Queried39289S13NOMS Excel tables to the web >> Excel Jeanie HTML 4
I want to take what is in column A and replace the number after the "=" with new number.
I need a formula that identifies the 6 numbers or letters after the = and replaces with column A
111111 showstocknumnber//details.php?vid=111111
222222 showstocknumnber//details.php?vid=111111
345673 showstocknumnber//details.php?vid=111111
The 111111 after the = could be any string of 6 letters and numbers. The contents of column b are a URL.
I need a formula to run down a column DCapture.JPG (starting at 142), when it finds the last entered value it needs to display the corresponding value from column J into cell AA21.
If you see the attached photo, the last entered data in column D would be 1, AA21 would be saying -30 (J205)
Capture.JPG
Col C = Text and Col F = dates
I would like to count the # of times a value occurs in Col C based on a date
range in Col F.
I have a workbook that usually looks something like this
Category Product No description Price
Balloons 12345 Red Disney balloon .50
Balloons 12567 Blue Princess balloon .86
Balloons 76521 Angry Birds Balloon .80
Kites 23456 A Big red Kite .27
Kites 22222 A small blue kite .06
Banners 10000 Party banner .33
etc..
I need to find a way to copy the category below an empty row from column A and paste it in the blank row in column B . If possible to bolden the text but I could probably work that bit out myself. I'm new to this but have used VBA before to run macros.
I have been working with a few people on here to setup a macro to copy text from a column of cells to another column and then print this in to a text document but it seams to have got stuck in a loop ....
View 9 Replies View RelatedI am looking for a Macro that will search a column for blank cells, and when one is found will add text to the same row in another column. For example: The below is a spreadsheet. I am trying to find something that will search through column "C" in this case and add text (of my choice) to Column "A" if the cell is Blank. So Since cell C1 is Blank then Type "ERROR" is cell A1.
A B C D E
1 X X X X
2 X X X X
3 X X X X X
4 X X X X
5 X X X X
This macro is extreemly basic but i have no skills in excel with macros. Basically i have 'Column A' with stats that i need input into 'Column B', however i need then to be input inside a field that is already there.....
View 4 Replies View RelatedI have 2 columns: Locations (Column A) & Dates (Column B).
I want to find the most recent date for a selected Location (stored in $G$1).
currently I have in C2: =If($A2=$G$1,$B2,"") copied down the column to the end of data (currently C153). Then in C1: =Max(C$2:C$153).
I also have in D2: =If($C2<$C$1,$C2,"") copied down to D153, and in D1: =Max(D$2:D$153) to find the 2nd most recent date.
Is there some way to condense this into just 2 cells?
See attached file for example (note the columns are currently sorted by date, but that is not always the case).
I need to sum values in a column, but only if the text in the same row of the adjacent column meets certain criteria. Below is a simplified version as an example:
A1 - Apple
A2 - Banana
A3 - Apple
A4 - Banana
B1 - 3
B2 - 2
B3 - 1
B4 - 1
I need a formula that will add up the cells in column B that have "Apple" next to them in column A. Apple would total up to 4 and Banana would total up to 3.
I have the following code that fills a range of cells (starting at the active cell) with the date a user selects from a calendar control.
Private Sub Calendar1_Click()
ActiveCell.Value = Calendar1.Value
Selection.Copy Destination:=Sheets("Audit_Results_Data_Collection").Cells(Rows.Count, "A").End(xlUp).Offset(1, 0)
Selection.Copy Destination:=Sheets("Audit_Results_Data_Collection").Cells(Rows.Count, "A").End(xlUp).Offset(1, 0)
Selection.Copy Destination:=Sheets("Audit_Results_Data_Collection").Cells(Rows.Count, "A").End(xlUp).Offset(1, 0)....................
I have two excel files.
File #1 is a varying length and has 4 columns with ID #s in Column A.
File #2 is a two column file that contains a list of ID #s in column A AND modified ID#s in column B.
I need to match the ID #s in column A from file# 1 to the list in column A of file#2 then replace ALL instances of the matching ID #s in column A of file#1, with the values found in column B of file #2.
I've tried using the substitute function but I could only replace one found ID at a time.
I am trying to move one column to the right each time the macro is ran. Next time it should go from columns B:B to C:C
View 12 Replies View Related