Copy Or Move Column Ranges From 1 Sheet To End Of Column Range Of Another
Mar 7, 2008
I have two different Excel reports and the data needs to be copied from each column on one spreadsheet and pasted to the bottom of the equivalent column on the other spreadsheet.
So, is it possible to get a macro that will copy the data from one column then paste it to the next free cell in the column on the other spreadsheet.
If I could get some code to do one column then this should be enough to get me started and I could apply this to the other columns I need to copy.
View 8 Replies
ADVERTISEMENT
Oct 25, 2007
I need help creating a macro that will search through my excel spreadsheet and for every instance where column A isn't empty it should cut a range of columns from that row and paste them in a different range of columns in the row before it. It should then delete the row that it cut the columns from and keep searching until it has done this for the whole worksheet. I can modify which range of columns are needed, but it has been so long since I've worked with excel macros that I haven't been able to do it.
View 5 Replies
View Related
May 8, 2008
I'm trying to write a DO, LOOP that simply starts at a cell, goes down the column and copies one by one each cell into another sheet until the next cell isempty.
here's my
Sheets("source").Select
Range("A41").Select
Application.CutCopyMode = False
Do Until IsEmpty(ActiveCell.Value)
Selection.Copy
Sheets("active orders").Select
Range("D1").Select
ActiveSheet.Paste
Loop
It currently just loops infinitely because it isn't selecting the new row down (A41 is always full). I'm not sure how to offset the row within the doloop as well as offset the rows to paste accordingly in the new sheet....
View 4 Replies
View Related
Feb 26, 2014
I need to copy columns b,g & h from workbook1 to workbook 2 c ,e, f
workbook1 is the path mentioned in cell A1
Workbook2 is the path mentioned in cell A2
View 1 Replies
View Related
Jun 1, 2008
i'm trying to create a macro to find any value <> "" from COLUMN B then copy Bx;Cx;Dx and paste into another worksheet with the name of COLUMN A.
And when the cells Cx or Dx is empty should appear 0 into the other worksheet
for example.
sheet1 ..... cell("dx") is empty
a b c d
w 5 3
the macro would copy 5,3,0 and paste into sheet named "w".
i found this code on internet but it's not quite good for me because it copies the hole row. i tried everything to change that but i couldn't.
[url]
(ORIGINAL CODE)
Sub SearchForString()
Dim LSearchRow As Integer
Dim LCopyToRow As Integer
View 9 Replies
View Related
Jun 30, 2014
I have a excelsheet that looks like this:
Column A | Column B | Column C
Los Angeles | Fire Dept | 3
Los Angeles | Health Services | 12
New York | Fire Dept | 8
New York | Health Services | 22
New York | Internal Services | 100
New York | Public Works | 7
Chicago | Health Services | 15
Chicago | Public Works | 56
Chicago | Social Services | 4
And I am trying to make it look like this:
Fire Dept
Health Services
Internal Services
Public Works
Social Services
Los Angeles
3
12
New York
8
22
100
7
Chicago
15
56
4
View 8 Replies
View Related
Jun 19, 2014
I have data that is on a separate .txt file (the source file) that resembles this;
A
B
C
D
E
F
1
Case
District
Pct
Division
Level1
Level2
2
305035
0
20
72
[Code] ..........
Using VBA from within the destination workbook, I would like to use an input box that allows the user to request/specify what numerical number (0 through 55) in Column B of the txt file (the source file) will be used to determine what data to copy to the destination file. The cells to copy to the destination file would be from Column A through Column G of the source file onto Sheet1, E2 of the destination file.
Column B of the Source file will only contain numbers. However there will be numerous identical numbers in Column B. All of which will need to be copied onto the destination workbook.
From the sample above, if the user were to enter '15' in the input box, the desired result on the destination sheet beginning at E2 would look like this;
E
F
G
H
I
J
1
Case
District
Pct
Division
Level1
Level2
2
502046
15
1
3
[Code] ............
View 9 Replies
View Related
Mar 25, 2014
I have a worksheet, "District", that has names of team members from A2:A (The number of team members will vary, so I would need the macro to stop when the list ends). I need these to be distributed to column A on another sheet, "Input", from A11 down until it hits a row that has a blank cell in column F. I've tried a couple of things, but just can't seem to get it to work.
View 14 Replies
View Related
Mar 7, 2007
I'm trying to write a program for work. One sheet (whereiseverything.xls) will have a list of parts column E and where it is in the process column (k). Column E of this sheet will have multiple part numbers. (Sometimes duplicated.) I would like to figure out how to write a code to Auto filter (whereiseverything.xls) sheet and copy only one P/N from (whereiseverything.xls) column E onto another Workbook Worksheet (Commit status.xls) column. After that the sheet must copy all of the locations of that P/N from whereiseverything.xls column K into and under the P/N of the Commitstatus.xls.
It will continue to autofilter and copy from where is everything, the "one" p/n and all of its locations into another empty column of Commitstatus.xls until it no longer has part numbers to autofilter on whereiseverything. I am extremely green on VBA programming but here is my first attempt.
Windows("Where is everything commits .xls").Activate
Windows("whereiseverything[1].xxx").Activate
Columns("D:D").Select
Selection.AutoFilter
Windows("Where is everything commits .xls").Activate
Windows("whereiseverything[1].xxx").Activate
Selection.AutoFilter Field:=1, Criteria1:="7516113-905" \<--this Is one p/n
Columns("J:J").Select
Selection.Copy....................................
View 2 Replies
View Related
May 29, 2014
I have set of data Pasted in 4th row, in the top row 44 columns values assigned i want move data from set of data to different column among these 44 columns
Like "Service Order ID" is 1 column in set of data ,it move to second column of top row
Some of column need to delete. (Service Order Type,Service Order Description,Created By,Status,Contact,Expected Delivery Date,
Creation Date,Priority,Net Value,Currency,External Reference,Reference Date)
I want Get output result in same sheet (Actual).
View 3 Replies
View Related
Aug 11, 2014
I have a large spreadsheet which I have extracted the data I need, but I am now having a problem tiding it up.
To simplify. I have 2 columns, both containing data formatted as text, each column has some data, but on different rows.
I need to merge the 2 columns without overwriting the data on the second column, with blank data from the first column, and without the column shrinking or growing.
Here is a section of my spreadsheet that needs merging : Excel-1.PNG
I have tried copy > Paste Special > Skip Blanks, but it just copies the column to the other - no merging.
View 1 Replies
View Related
Apr 23, 2014
I have a excel file Sheet 1 is active data Sheet 2 is complete data, How can I make the column move automatic from one sheet to another with out cut/pasting?
View 1 Replies
View Related
Feb 6, 2014
I have a sheet called 'TimeRecorded' which will contain lots of rows of data.
If a row contains 'invoice' in column H, then the data in that row, preferably as far as column H, should be moved to the next blank row in a sheet called 'Archived'.
I would like the macro to move every row that contains 'Invoice' in column H to be moved.
View 1 Replies
View Related
May 30, 2012
Basically Column O has data that need to be moved to the different worksheet in one workbook.
so If Column O=Bad Number in any row in Column O move to sheet1 or If Column O=Good Number in any row in Column O move to sheet 2 etc.
View 6 Replies
View Related
Apr 8, 2008
I have a contiguous multi column, multi row numeric range that I want to copy (and sort in ascending order) into a single column on another sheet in the same workbook. What VBA code could achieve this, or alternatively can this be achieve via formulas?
View 3 Replies
View Related
Jan 30, 2012
I'm trying to make the below two column selections into a selected range to clear out formulas/values in the range.
Current code segments:
ActiveCell.EntireColumn.Select
Columns(ActiveSheet.UsedRange.Columns(ActiveSheet.UsedRange.Columns.Count).Column).EntireColumn.Select
Is there a way to combine the two code segments into one selected range?
View 6 Replies
View Related
Jun 13, 2013
I am trying to move info from an unformatted sheet to a sheet ready to import into a program. I need to look at the source sheet and if a column heading matches the heading on the destination sheet I need it to move the entire column to the destination sheet.
View 3 Replies
View Related
Apr 10, 2008
I am using Excel 2007. I have a worksheet called January and I have a range of formatted cells in 'January' between B15:18 and BA15:18. Some contain formulas, others are just formated to size and or color. I want to copy and paste this range of cells (B15:18:BA15:18) to the next available unformatted or blank cell of the column of the same worksheet by pressing a button. I also need the newly pasted range to reset to their original formatting assuming data was entered before the button was pressed.
View 5 Replies
View Related
Aug 7, 2009
in column B of sheet1 i have every 3rd-4th row a name. i need to copy the name and the the data on the row below the name to sheet2,
the list of names can be min 2 max 30.
so sheet 1 has row 14- name in column B and C. in row 15 in columns d:z data for the name.
i need to copy this to one row in sheet 2 copied for each name up to 30.
View 9 Replies
View Related
Jun 16, 2012
I have to SET sh1, then activate sh1 before I can SET rng1. Is there a way to just...
Set rng1 = sh1.Range(Columns(1), Columns(11)) ' why doesn't this work?
Sub Raw_Sales()
Dim sh1 As Worksheet
Dim sh2 As Worksheet
Dim rng1 As Range
[Code]...
View 1 Replies
View Related
May 21, 2014
I need a 'simple' vba that outputs all the dates in a range that correspond to a particular ID in a column as well as that same ID in a column beside the dates.
So basically using the data in columns A to B as input, to get columns E and F as output.
Also, for a lot more than just 3 IDs.
View 3 Replies
View Related
Feb 7, 2014
I am in need of restructuring a spreadsheet of addresses for mailing purposes. (I tried to find something similar answered previously, but nothing seemed to work for me.)
I have attached a small example spreadsheet below, but our spreadsheets can be hundreds or thousands of rows in length.
I need a macro that will look for the "PO Box" addresses under the column headers named "ADDRESS2" and "ADDRESS3".
The PO Box addresses will need to be moved under the column header "ADDRESS1" within the same row.
It will need to overwrite the text that is already under "ADDRESS1" and delete the text from the "ADDRESS2" and "ADDRESS3" columns - UNLESS the text in 'ADDRESS2" is a PO Box AND "ADDRESS1" begins with "c/o".
If the data in "ADDRESS2" or "ADDRESS3" is anything other than a PO Box it will remain the same. As will "ADDRESS 1".
Basically if there is a PO Box it needs to be in the column named "ADDRESS1" and overwrite anything else that was there. The exception will be for PO Boxes that are in c/o someone else, the PO Box will then need to be listed in the column directly after the column that has c/o.
If the c/o exception will be too difficult the code could just highlight those scenarios and we could fix them manually. We usually do not have a lot of them, but enough that we need to be mindful of them.
The different scenarios are listed in my sample spreadsheet.Also, the code will have to use the column header names in row 1 because those headers are not always in the same column.
View 14 Replies
View Related
Apr 27, 2009
I have rather large Excel file that spans around 245 columns & has multiple users responsible for certain columns. Columns are chunked to provide data about a specific group. Every 72 hours, I need to provide to managers what’s currently on this file in a specific summary format.
I’ve recorded a macro that gets me half way there. Here’s where I’m clueless. After my macro deletes unnecessary columns, what remains are the columns for “Main Data” group + each of the 5 “Business” groups (Investors, Lawyers, Credit, Finance, and Support) which would have identical column headings.
(1) Name (2) Address (3) ID# (4) Control#
Furthermore, for each of the 5 “Business” groups, there are 9 slots (ie- a user can enter up to 9 unique entries for a particular group.)
Example- The Investor group contains 9 slots. Each slot will contain the 4 columns mentioned above. So there are 46 slots in total – 1 for Main Data, 45 (5 groups x 9 slots) for Business groups.
MAIN DATA (columns A-D)
Investor1 (columns E-H)… Investor2 (columns I-L)… Investor9 (columns AK-AN)
Lawyer1… Lawyer9
Compliance1… Compliance9
Finance1… Finance9
Support1… Support9
MY PROBLEM: I need a macro to now cut & paste all data from each of the 45 Business groups slots & then paste at the bottom of the MAIN DATA slot.
The final file would be 4 columns (as listed above) wide. Data from each of the 45 business group slots would be one below the other- all of it underneath the data in the Main Data group.
I attempted to record a macro where I’m copying a section’s data range starting from row2 to row4000 (I know there will never be 4000 entries. I did this just to ensure that all future data would be captured) then pasting that after the last entry in the Main Data.
Example- I’d copy data from Investor1 slot(starting at column E2-H2) & go about 4000 rows down. Then I’d press CTRL+Down Arrow key in column A & then click the down arrow one time to take me into 1st empty cell where I would paste my copied data. I was going to repeat this process for the remaining 44 slots.
I’ve added some extra entries to test the macro & the problem is that the recorded macro is pasting data in specific cell location in column A instead for looking for the 1st empty cell in column A & then pasting the copied data.
So far I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work. Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A. I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work.
Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A.
Sub transposedata()
Sheets("ConsolidatedYTDReport").Select
Range("E2:H4202").Select
Selection.Copy
XXXXXXXXXXXX
ActiveSheet.Paste
End Sub
View 10 Replies
View Related
Aug 28, 2012
I am trying to move a column of numbers based on the information in another column. I've been looking for about a week and find macros that are close but not quite.
In one column it reads Mobile, Home, or is blank. If the number is a Mobile (column R), the area code (column P) needs to move to column S and the phone (column Q) needs to move to column T and the primary phone (column R) needs to move to column U. Home and blank cells remain as they are.
area (P)
phone (Q)
primary phone (R)
col S
col T
col U
[code]....
View 7 Replies
View Related
Mar 18, 2014
All info goes to the master inventory and then if some enters an amount for respray then it is transferred to the respray sheet. when it is transferred to the respray sheet it put the date in Column A and then put 3 days later in Column B.
Every day it will change and the date in A1 changes to tomorrow but if another item is enter as having resprays then it transfers to the respray sheet and will bump down in column C but Column A stays the in the same spot.
I need Column A and B to move up and down if something in Column C moves up or down and it would be nice to always have the oldest date at the top.
View 7 Replies
View Related
Feb 3, 2009
I have attached a sample spreadsheet – what I want to do is insert a column before the current column A and move the current column D in to it and auto fill for every non blank cell in column B. Also, there are different values in column D such as “B03” ,”B41” etc – so for example, it should auto fill B03 until it comes across either a blank cell in column B or it comes across a “B41” and then it should do the same until it comes across a “B42” or a blank cell again. This needs to continue till the end of the report.
View 2 Replies
View Related
Jan 22, 2007
I want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
View 9 Replies
View Related
Jan 31, 2013
I have a large spreadsheet converted from pdf whose data still appears in A4 reading format.
I need to move part columns of data from 6 columns to form 1 large column in column A.
For example, move range B8 to B76 beneath range A8 to A76 and range C8 to C76 beneath that etc, page by page working through all 270 pages !
Also need to delete unnecessary 'page headers' throughout as in rows 2-6
View 2 Replies
View Related
Sep 11, 2012
I am basically trying to find the first non-empty cell in a range, but I want the macro to look down columns first. In other words, I want it to look down column A, then column B, and so on. Right now I believe it is searching by rows.
With Columns("A1:D15")
.Find(what:="*", after:=.Cells(1, 1), LookIn:=xlValues).Activate
End With
how to make it search through columns then rows?
View 1 Replies
View Related
Feb 16, 2010
I'd like a macro that finds all cells in column C with the text "Apple" and moves all those cells values (text) to column E.
Case InSensItive.
One Caveat though, the search must continue and not stop searching until it is equal to the bottom-most row of data in column F.
I don't want this macro to search all 1 Million + Rows.
View 9 Replies
View Related
