Insert Column, Move Another Column Into It And Autofill
Feb 3, 2009
I have attached a sample spreadsheet – what I want to do is insert a column before the current column A and move the current column D in to it and auto fill for every non blank cell in column B. Also, there are different values in column D such as “B03” ,”B41” etc – so for example, it should auto fill B03 until it comes across either a blank cell in column B or it comes across a “B41” and then it should do the same until it comes across a “B42” or a blank cell again. This needs to continue till the end of the report.
View 2 Replies
ADVERTISEMENT
Sep 8, 2006
I have a very large spreadsheet that I imported from a Text File into .xls. I need help changing some of the cells around. there is a macro that change the format into the desired look. It takes me about 4 hours a week to clean up this spreadsheet. This is what is the spreadsheet looks like after importing:
Row 1Column AColumn B
Row 2340 Name
Row 3
Row 4
Row 5Actual
Row 6Activities
Row 7AAAAAA16:34
Row 8BBBBBB35:08
Row 9CCCCCC0:02
Row 10DDDDDD57:25
Row 11EEEEEE8:56.....................
View 9 Replies
View Related
Jun 30, 2014
I have a excelsheet that looks like this:
Column A | Column B | Column C
Los Angeles | Fire Dept | 3
Los Angeles | Health Services | 12
New York | Fire Dept | 8
New York | Health Services | 22
New York | Internal Services | 100
New York | Public Works | 7
Chicago | Health Services | 15
Chicago | Public Works | 56
Chicago | Social Services | 4
And I am trying to make it look like this:
Fire Dept
Health Services
Internal Services
Public Works
Social Services
Los Angeles
3
12
New York
8
22
100
7
Chicago
15
56
4
View 8 Replies
View Related
Nov 27, 2011
Autofill column B with sequential values based on whether value in column A changes its value.
I would like to autofill column 'B' with sequential values (i.e. GenoMap1, Genomap2, Genomap3,... GenoMap10, GenoMap11, GenoMap12,... GenoMap104, GenoMap105, etc...), but changing to the sequential GenoMap# only when the value in column A changes.
This is what I imagine.
A1 "Alfiero", B1 "GenoMap1"
A2 "Alfiero", B2 "GenoMap1"
A3 "Alfiero", B3 "GenoMap1"
A4 "Allocati", B4 "GenoMap2"
A5 "Amaranto", B5 "GenoMap3"
A6 "Amaranto", B6 "GenoMap3"
A7 "Amaranto", B7 "GenoMap3"
A8 "Ambrosiano", B8 "GenoMap4"
A9 "Ambrosiano", B9 "GenoMap4"
A10 "Ambrosiano", B10 "GenoMap4"
A11 "Ambrosiano", B11 "GenoMap4"
I listed examples above of GenoMaps higher than 10 and 100 to show how I need them numbered.
I'm using MS Excel 2007 in Windows 7.
View 2 Replies
View Related
May 29, 2014
I have set of data Pasted in 4th row, in the top row 44 columns values assigned i want move data from set of data to different column among these 44 columns
Like "Service Order ID" is 1 column in set of data ,it move to second column of top row
Some of column need to delete. (Service Order Type,Service Order Description,Created By,Status,Contact,Expected Delivery Date,
Creation Date,Priority,Net Value,Currency,External Reference,Reference Date)
I want Get output result in same sheet (Actual).
View 3 Replies
View Related
Apr 22, 2009
What I'd like to do is; If column C contains data then insert a blank column and shift column C to the right.
View 4 Replies
View Related
Oct 9, 2009
I have a Listbox that outputs data to Column A. Is there a way to auto populate Column B with 4 items for each Entry in Column A?
The 4 items that will populate in Column B will always be the same.
I have attached an example to better explain what I am trying to describe.
View 6 Replies
View Related
Aug 10, 2013
I want to Autofill a Column C to repeat a set of data in Column A, if Column B contains an integer, as shown below. Being able to Autofill this data allows me to have a dynamic table for use on multiple projects that may have a different amount of rows in Column B.
Outflow % Table
25
50
[Code]......
View 6 Replies
View Related
Jan 13, 2014
Using DataEntry sheet for data.
Trying to rearrange the data to DataFormatedProperly sheet.
So far all I can accomplish is DataFormatedWrong sheet.
Edit: Not sure what happened but file was NOT understandable before. It should be correct now.
View 2 Replies
View Related
Apr 14, 2014
I have a colum full of durations in 00:00:00 format. I need a forumla to look at these durations, count the seconds and then multiply those seconds by a predfined rate. In effect giving me a second colum full of costs.
I have attached a screenshot f the data, and the rate should be 0.0073p (.73 of a penny)
View 5 Replies
View Related
Feb 7, 2014
I am in need of restructuring a spreadsheet of addresses for mailing purposes. (I tried to find something similar answered previously, but nothing seemed to work for me.)
I have attached a small example spreadsheet below, but our spreadsheets can be hundreds or thousands of rows in length.
I need a macro that will look for the "PO Box" addresses under the column headers named "ADDRESS2" and "ADDRESS3".
The PO Box addresses will need to be moved under the column header "ADDRESS1" within the same row.
It will need to overwrite the text that is already under "ADDRESS1" and delete the text from the "ADDRESS2" and "ADDRESS3" columns - UNLESS the text in 'ADDRESS2" is a PO Box AND "ADDRESS1" begins with "c/o".
If the data in "ADDRESS2" or "ADDRESS3" is anything other than a PO Box it will remain the same. As will "ADDRESS 1".
Basically if there is a PO Box it needs to be in the column named "ADDRESS1" and overwrite anything else that was there. The exception will be for PO Boxes that are in c/o someone else, the PO Box will then need to be listed in the column directly after the column that has c/o.
If the c/o exception will be too difficult the code could just highlight those scenarios and we could fix them manually. We usually do not have a lot of them, but enough that we need to be mindful of them.
The different scenarios are listed in my sample spreadsheet.Also, the code will have to use the column header names in row 1 because those headers are not always in the same column.
View 14 Replies
View Related
Mar 7, 2008
I have two different Excel reports and the data needs to be copied from each column on one spreadsheet and pasted to the bottom of the equivalent column on the other spreadsheet.
So, is it possible to get a macro that will copy the data from one column then paste it to the next free cell in the column on the other spreadsheet.
If I could get some code to do one column then this should be enough to get me started and I could apply this to the other columns I need to copy.
View 8 Replies
View Related
Aug 28, 2012
I am trying to move a column of numbers based on the information in another column. I've been looking for about a week and find macros that are close but not quite.
In one column it reads Mobile, Home, or is blank. If the number is a Mobile (column R), the area code (column P) needs to move to column S and the phone (column Q) needs to move to column T and the primary phone (column R) needs to move to column U. Home and blank cells remain as they are.
area (P)
phone (Q)
primary phone (R)
col S
col T
col U
[code]....
View 7 Replies
View Related
Mar 18, 2014
All info goes to the master inventory and then if some enters an amount for respray then it is transferred to the respray sheet. when it is transferred to the respray sheet it put the date in Column A and then put 3 days later in Column B.
Every day it will change and the date in A1 changes to tomorrow but if another item is enter as having resprays then it transfers to the respray sheet and will bump down in column C but Column A stays the in the same spot.
I need Column A and B to move up and down if something in Column C moves up or down and it would be nice to always have the oldest date at the top.
View 7 Replies
View Related
Apr 4, 2014
I have a 2 groups of column headings with a different month and year in each heading so
1st Group of columns range
Columns AJ through AX
Column Heading example "Expense Ratio February 2013......next Column over is "Expense Ratio March 2013"
2nd Group of columns range AY though CE
Column Heading example "Capital Balance February 2013......next Column over is "Capital Balance March 2013"
Each new month I need to add a new Expense Ratio column after the most recent expense ratio Column. (i.e. Find "Expense Ratio March 2013" and I need to add a column after that with heading "Expense Ratio April 2013"
Same thing for Capital Balance - add a new Capital Balance column after the most recent Capital Balance Column. (i.e. Find "Capital Balance March 2013" and I need to add a column after that for "Expense Ratio April 2013"
Because the ranges keep changing month over month, how do i do this.
View 4 Replies
View Related
Nov 11, 2008
I'm trying to create an excel worksheet as follows:
Column1 Column2 Column3 Column4 Column5
Date Time In Time Out Hours Worked Pay
01/03/2000
01/04/2000
01/05/2000
.
.
11/11/2008
I want to insert in the first column (Column1) dates starting from 01/01/2000 all the way up to today, 11/11/2008. So I would end up with a unique date on each row.
To accomplish this manually would be a daunting task. I'm a newbie to excel and don't know how to use any in-built functions.
View 3 Replies
View Related
Mar 21, 2014
I have a workbook that usually looks something like this
Category Product No description Price
Balloons 12345 Red Disney balloon .50
Balloons 12567 Blue Princess balloon .86
Balloons 76521 Angry Birds Balloon .80
Kites 23456 A Big red Kite .27
Kites 22222 A small blue kite .06
Banners 10000 Party banner .33
etc..
I need to find a way to copy the category below an empty row from column A and paste it in the blank row in column B . If possible to bolden the text but I could probably work that bit out myself. I'm new to this but have used VBA before to run macros.
View 6 Replies
View Related
Nov 23, 2012
I am after a macro to insert a column lets say between column A and B. Once column inserted new column B should be filled by a text say "January" but it should be only filled upto the data of column A so if column A has data upto A600 then column B should be filled from B1 to B600.
I tried recording but it fills data upto B65000+.
View 2 Replies
View Related
Jul 11, 2014
I want to change the following code so that it fills a row instead of a column
[Code] ......
This fills column "A" top down but I now would like to fill row "1" left to right.
View 2 Replies
View Related
Sep 17, 2008
I have code to fill down to the last row with data for 1 column Can I adapt the code to fill down more than 1 column. current code for 1 column
View 2 Replies
View Related
Feb 10, 2010
the code as shown below so that in column A of worksheet: Data to Text I need an AutoFill from cell A1 to the last row. The value in cell A1 needs to be: 1
If there are more than 1 records then I need an AutoFill from cell A1 to the last row. However, the value in cell A1 needs to be 1, value in cell A2 needs to be 2, value in cell A3 needs to be 3 etc...
View 2 Replies
View Related
Apr 3, 2014
I want to create a macro which inserts a new colum after the last colum with data.
View 3 Replies
View Related
Mar 22, 2007
Following up from Insert Blank Rows Where Date In Column D Changes from the first populated row after the inserted rows, and paste it in the 1st blank row above the populated rows (as a kind of title). How would I build this into the code below?
Private Sub CommandButton1_Click()
For x = Range("D65536").End(xlUp).Row To 7 Step -1
If Range("D" & x) <> Range("D" & x - 1) Then Range("D" & x, "D" & x + 3).EntireRow.insert
Next
End Sub
View 7 Replies
View Related
Jan 31, 2013
I have a large spreadsheet converted from pdf whose data still appears in A4 reading format.
I need to move part columns of data from 6 columns to form 1 large column in column A.
For example, move range B8 to B76 beneath range A8 to A76 and range C8 to C76 beneath that etc, page by page working through all 270 pages !
Also need to delete unnecessary 'page headers' throughout as in rows 2-6
View 2 Replies
View Related
Sep 11, 2012
I am basically trying to find the first non-empty cell in a range, but I want the macro to look down columns first. In other words, I want it to look down column A, then column B, and so on. Right now I believe it is searching by rows.
With Columns("A1:D15")
.Find(what:="*", after:=.Cells(1, 1), LookIn:=xlValues).Activate
End With
how to make it search through columns then rows?
View 1 Replies
View Related
Feb 16, 2010
I'd like a macro that finds all cells in column C with the text "Apple" and moves all those cells values (text) to column E.
Case InSensItive.
One Caveat though, the search must continue and not stop searching until it is equal to the bottom-most row of data in column F.
I don't want this macro to search all 1 Million + Rows.
View 9 Replies
View Related
Aug 1, 2012
The code below inserts a formula into E2, copies it across to column O and then down to the last row. It works fine but if more columns are added obviously it would need to be changed to go up to column P for example.
How can I change this so that the formula will be copied across to the last column automatically and therefore the code will not need to be changed?
Code:
Dim LR As Long
LR = Range("A" & Rows.Count).End(xlUp).Row
Range("E2").Select
[Code]....
View 2 Replies
View Related
Jan 8, 2009
I have a spreadsheet with a varying number of columns with data.
Now I like to copy the header over it till the last column that contains data.
If I used the recorded VBA the range is stated in letters (In the sample below column K but this can be any column).
What is the best way to code it in such a way that one gets the headers till the last column used?
Range("A1:B1").Select
Selection.AutoFill Destination:=Range("A1:K1"), Type:=xlFillDefault
View 9 Replies
View Related
May 29, 2014
I'm trying to autofill data in a column from one sheet to another in the same workbook. My goal is to be able to paste data in one sheet and have it appear in another sheet.
View 2 Replies
View Related
Dec 26, 2012
I have a spreadsheet that lists numbers in a column. They increase 1 number at a time, however the same number is listed 24 times before increasing to the next. Scaled down to 3 times it would look like this: 111, 222, 333, 444, 555, each one of those individual numbers would have their own cell. When I highlight the column and drag down, it starts doing decimals..how do I get it to recognize it? sample.xlsx
I want to drag it down to continue the pattern. Right now, I type a couple of numbers and drag to finish the section.
View 3 Replies
View Related