MultiPage Textboxes To Accept Only Numbers
Jun 14, 2007i have a userform which has more than 20 textboxes. these boxes need to accept numbers only. what codes can i use so that all the textboxes will be formatted in such way?
i have a userform which has more than 20 textboxes. these boxes need to accept numbers only. what codes can i use so that all the textboxes will be formatted in such way?
UserForm1, page5. From Combobox1 I choose a city and the textboxes give me the values from Sheet3. I'd like to color in green the smallest value. for example, if for LHR I find for A-4214, B-4420, C-3127 => value 3127 to be green. The problem is I have more textboxes in other pages and some of them are colored in green also. Is possible to reffer to these textboxes from page5 only?
View 8 Replies View RelatedLast weeks I've had too few spare moments to answer questions, hope to pick that up soon. I have a strange problem now with some checkboxes on a multipage control.
Please see the attachment.
I want to check all the 5 boxes on a page if the box above is checked, and vice versa, uncheck them all if the box above is unchecked. I use code of Dave Hawley to loop through the checkboxes.
This doesn't work, but oddly enough, it works if I insert a MsgBox in the code.
re: Validating Textbox to work on a simple form.)
View 2 Replies View RelatedI am looking for a formula that either accepts the number in a cell if the numbers on two other cells are "approved". In other words, I have on cell A1 my value to be tested. On cells A2 and A3 I have two numbers. On cell A4 I'm looking for a formula that copies the number on A1 if A2 is bigger then 0.25 and A3 is smaller then 0.35. In not, there's no copy or a N/A appears.
View 3 Replies View RelatedI am currently trying to make some VB code that will allow me to offset and select cells depending on a couple of variables.
I have a UserForm that requires two numbers from the user. These numbers will correspond with the cells I want to highlight (the strings from the TextBoxes in the UserForm are called 'test1' and 'test2' in the code shown below)
Dim test1 As String
Dim test2 As String
Private Sub CommandButton1_Click()
test1 = Roww1.Text
test2 = Roww2.Text
Worksheets("Sheet2").Range("A1").Value = test1
Worksheets("Sheet2").Range("B1").Value = test2
When this script is run, I want to end up with some selected cells in sheet1 that match up with the numbers the user enters into the UserForm.
i have 2 userforms one with textboxes and the other one with listbox and textboxes.
Everytime user input their data(ie:first name, last name, address etc) in the first form the data's going to be saved in Worksheet("customerSheet") and later on to be displayed in the second form. using the listbox you can select the customer's name and the customer info will be displayed in the textboxes.
here's my code in second form
Private Sub UserForm_Initialize()
Worksheets("CustomerSheet").Activate
Range("A1").Select
'ActiveCell.CurrentRegion.Name = "Database"
'Selection.End(xlDown).Select
'ActiveCell.address(False, False)
viewCustomerBox.RowSource = "A2:A15"
End Sub
if it was possible to limit data input to DDE (I am using winwedge to capture numeric data). Dave Hawley replied that all I had to do was lock the cells and protect the workbook. I have now done this but the data is not accepted unless the cells are not protected, anyone any ideas on what I am missing?
View 4 Replies View RelatedI have a cell tha't set up as a number format with the validation only accepting 3 whole number characters, however if the number is 098 then it converts it to 98. I need for that cell to be a number type format and to accept 0 as the first character. I thought I tried everything but I'm sure I'm missing something.
View 9 Replies View RelatedMy code is correct, I have confirmed this with several people. However, the code does nothing.
View 9 Replies View RelatedI have to validate a cell to only accept the letter a, d ,f ,g h,. I know this is probaly very simple but i havent touched excel since last november and have completely forgotton the most simple of things!
View 4 Replies View Relatedbelow code. I need to change this code to accept 12 digits.
View 13 Replies View RelatedI have a large spreadsheet with approx 1250 rows, the email address was filled in like this: Name (address@company.com)
the software that I am importing the sheet into will not accept the address in this format. I need just the address, no parentheses, name, etc.
Is there a rule I can run to delete everything I do not need so that I don't have to delete info in 1250+rows?
code which will allow me to update only todays date in particular cell in that cooumn and once the date has been entered it will save as value so that next day it will not change the date.
If I want to let cell accept date or word "NA" only if i use custom data validation.
View 3 Replies View RelatedWith the UDF below and the portion highlighted in red, how can the red part be made part of the arguments instead of specifying it in the code?
Code:
Function Countcolor(rColor As Range, rCountRange As Range)
Dim rCell As Range
Dim iCol As Integer
Dim Result
Application.Volatile
[Code]....
I am trying to set up a chart, such that its charted ranges can be change by changing some cell values.
I am having a hard time getting past first base, however.
I have created a named range:
Code:
Name: LowerTrend
Refers To: = Offset(Values!$AV$200,0,0,800,1)
When I try to edit the chart series by placing 'LowerTrend' into Series values it will select the range by showing the dashed line around it, but it will not chart the data and when I exit the 'Edit Series' dialogue and then come back, the named range is not shown.
My VBA form for excel currently only accepts numeric. I want two of its fields to accept alphanumerics. Those two textboxe fields are cboIns and TextCmt in the code below.
Code for the form is given below.
VB:
Dim dic As ObjectDim Ctrls
Dim myTBoxes() As clsTxtBoxes
[Code].....
I'm trying to create a formula where I can compare two cells but accept them as equal is one is plus/minus 0.1.
Example:
Cell A1 is 3, Cell A2 is 3.2, I want Cell A3 to turn red (or report "1")
Cell A1 is 3, Cell A2 is 3.1, I want Cell A3 to turn green (or report "0")
I have a shared workbook. Just used as a checklist for daily tasks. But opened on 5 pc's for users to edit. Is there a way to assign the process of click Review > Track Changes > Accept/Reject Changes... to a marco button?
View 1 Replies View Relatedif I want 2 conditions satisfied in order for a value to be returned, would I need to set up/name tables, set ranges, etc? e.g,
If A1 contains baby, AND B1 contains Carly, then C1=carly.jpg
If A1 contains girl, AND B1 contains Carly, then C1=carlyg.jpg
If A1 contains baby, AND B1 contains Billy, then C1=billy.jpg
If A1 contains summer, AND B1 contains Wally, then C1=winter.jpg
etc.
Roughly 40 different conditions will be needed. What formula would I use and how should I name and set up my table?
I'm setting something that allows the user to compare bond yield curves on a graph. The setup involves a dropdown to select the final year of data the user wants to see and several date drop-downs.
For example, if the user wants to compare the current yield curve out to 2031 against how the same curve looked the end of Q1 2011 and Q2 2011, he would select "2031" in the first dropdown and then select "4/1/2011", "7/1/2011", and "9/8/2011" in the other three dropdowns.
The data is on a separate sheet, and mechanics of my named ranges are sound. However, Excel won't allow me to add my named ranges to my graph.
As is, the series looks like this:
=SERIES($L$5,'2011'!$B$3:$B$25,'2011'!$C$3:$C$25,1)
I'm trying to replace $B$3:$B$25 with CRV_DATES and $C$3:$C$25 with CRV_ONE (when I get this to work I'll add the other curve to the chart). When I try to add them, though, I can't get out of the series dialogue. When I hit enter, nothing happens--no error message, no nothing. The change simply won't "stick".
Here are my primary named ranges and the ranges/functions I use within them:
CRV_DATES: =OFFSET('2011'!$B$3,0,0,FindCurve,1)
CRV_ONE: =OFFSET('2011'!$C$2,1,MATCH(DATE_ONE,StartDateRange,0)-1,FindCurve,1)
FindCurve: =MATCH(CRV_END,MaturityRange,0)
StartDateRange: =OFFSET('2011'!$C$2,0,0,1,COUNTA('2011'!$2:$2))
MaturityRange: =OFFSET('2011'!$B$3,0,0,30,1)
CRV_END: =Sheet1!$L$3
I want a format that does not accept the point and put the hyphen CPF.
I 123456789-10 format and desire that even putting the point, leave the cell in this format 12345678910.
I know I could use the replace function through the ctrl + l, most wonder if there's no way to customize the cell.
Name
Day
Total
AlanMon400AlanThur600TomMon200TomWed300JamesMon1000Output4002001000
What function/formula can I use if I want that function to accept 2 criterias and returns me a result. Based on the above example, if the criterias are Alan & MOn, it will return 400 and if the criterias are Tom and Mon, it will return 200 and if the criterias are James and MOn, it will return 1000. Bascially, I want a function that can accepts 2 criterias. I do not want to sum up the total of the rows that are associated with one of the criteria i.e Alan. For Alan, I want 400 instead of 1000
Using the Dynamic Named Range tip, I defined named variables as follows:
Xrange=OFFSET($A$2,0,0,COUNT($A:$A),1)
Yrange=OFFSET($B$2,0,0,COUNT($B:$B),1)
then tried to define my Chart series as follows:
=SERIES($B$1,Xrange,Yrange,1)
but it gives an invalid reference error. What am I doing wrong?
I have a linked text box and spin button on a userform so the user can enter text or use the buttons and I'm having trouble barring non-integer inputs! Here's what I have so far:
Text box = NumberBox
Spin button= NumberSpin
I'm building a form comprising some text boxes and drop down lists. I'd like for data (once input into the form by the user) to input, upon click of a submit button, into an excel spreadsheet, row by row.
Here's where i'm struggling: I need the form to validate data before submitting. Namley, the form must not allow null values to be submitted and will show a message box telling the user what is needed.
Below is what i've got so far. I've tried playing around with this but am struggling to implement the above functionality:
[Code] ..........
I'm very new to Excel and definately to macros/vba. I've already received a tremendous amount of help with this file but I'm am really struggling here and getting very frustrated! I've got a pretty good handle on the excel part but the macros/vba is another story. Here is what i'm attempting to do: I've created a form "frmMacroButtons" which has 8 buttons. When the workbook is opened I want this form/window to launch. I want the user to be able to select any of the buttons but also be able to just click into the worksheet manually if wanted but have the window stay open to go back to use the buttons. Each of the buttons I've typed a description of what I want each of the buttons to do in the code view.
View 14 Replies View RelatedData validation in an Excel 2010 workbook.
I want the date input to be restricted a start date and an End date specified in two cells on the sheet. However, when I set up the Data Validation, ANY date will be accepted.
As an example cell Z1 contains the date 1/3/2014 and Cell Z2 contains the date 31/3/2014, so in the Data Validation box, the Start Date is referenced to Z1 and the End Date is referenced to cell Z2.
But I can enter 1/9/2020 and the Data Validation happily accepts that date.
I am creating a bar inventory/"numbers" sheet for a corporation. I have been searching on and off for a week or so to find an answer or a tutorial on what I am looking to implement into this worksheet. I want to take a userform, with a multipage control, and have the control for each tab, show me a different part of the worksheets. For instance, the first tab would be inventory, the second tab would be ordering, the third tab would be weekly numbers, etc ... I am wondering how to "add ranges to the multipage control in order to make it a "viewer". I have found tutorials on how to print, enter info into the form and save it to the sheets using a button, but I can't find a tutorial on how to implement the control on how to make tabs show the ranges. Can someone point me in the right direction on a tutorial, or maybe if willing a small spreadsheet with a mulitpage control on it, showing how to add the ranges from different worksheets?
View 14 Replies View Related