I have a large spreadsheet with approx 1250 rows, the email address was filled in like this: Name (address@company.com)
the software that I am importing the sheet into will not accept the address in this format. I need just the address, no parentheses, name, etc.
Is there a rule I can run to delete everything I do not need so that I don't have to delete info in 1250+rows?
if I want 2 conditions satisfied in order for a value to be returned, would I need to set up/name tables, set ranges, etc? e.g,
If A1 contains baby, AND B1 contains Carly, then C1=carly.jpg
If A1 contains girl, AND B1 contains Carly, then C1=carlyg.jpg
If A1 contains baby, AND B1 contains Billy, then C1=billy.jpg
If A1 contains summer, AND B1 contains Wally, then C1=winter.jpg
etc.
Roughly 40 different conditions will be needed. What formula would I use and how should I name and set up my table?
What would be the correct formula to check the format of an address that must start with a number followed by a space then text - in cell B4
At the moment I have:
=IF(B4="","r",IF(ISERROR(SEARCH(" ",B4,1)),"r",IF(ISNUMBER(VALUE(LEFT(C5,SEARCH(" ",C5,1)-1))),"a","r")))
If it is incorrect or missing an 'r' should be displayed, an 'a' if correct
I have been trying to find an easier way to make sure that the email address that I have been given in a excel workbook are in the proper format before I try to use them. I have tried doing a google search on this subject but have not found the correct solution. I want to enter a function in column L that would use a regular expression for the email format and compare it to the email address in column J. If the results are true place a value of 1 in column K. If false place a value of 0 in column K.
View 2 Replies View Relatedhow I can get this:
John Smith
1 Aisleby Avenue
Nottingham
Notts
NO1 1ON
i.e. each line in it's own cell
to look like this:
John Smith
1 Aisleby Avenue
Nottingham
Notts
NO1 1ON
In other words, an address block in a single cell. Simple merging only saves the first cell's contents.
I need to do this for 500 addresses
if it was possible to limit data input to DDE (I am using winwedge to capture numeric data). Dave Hawley replied that all I had to do was lock the cells and protect the workbook. I have now done this but the data is not accepted unless the cells are not protected, anyone any ideas on what I am missing?
View 4 Replies View RelatedI have a cell tha't set up as a number format with the validation only accepting 3 whole number characters, however if the number is 098 then it converts it to 98. I need for that cell to be a number type format and to accept 0 as the first character. I thought I tried everything but I'm sure I'm missing something.
View 9 Replies View RelatedMy code is correct, I have confirmed this with several people. However, the code does nothing.
View 9 Replies View RelatedI have to validate a cell to only accept the letter a, d ,f ,g h,. I know this is probaly very simple but i havent touched excel since last november and have completely forgotton the most simple of things!
View 4 Replies View Relatedbelow code. I need to change this code to accept 12 digits.
View 13 Replies View Relatedcode which will allow me to update only todays date in particular cell in that cooumn and once the date has been entered it will save as value so that next day it will not change the date.
If I want to let cell accept date or word "NA" only if i use custom data validation.
View 3 Replies View RelatedWith the UDF below and the portion highlighted in red, how can the red part be made part of the arguments instead of specifying it in the code?
Code:
Function Countcolor(rColor As Range, rCountRange As Range)
Dim rCell As Range
Dim iCol As Integer
Dim Result
Application.Volatile
[Code]....
I am trying to set up a chart, such that its charted ranges can be change by changing some cell values.
I am having a hard time getting past first base, however.
I have created a named range:
Code:
Name: LowerTrend
Refers To: = Offset(Values!$AV$200,0,0,800,1)
When I try to edit the chart series by placing 'LowerTrend' into Series values it will select the range by showing the dashed line around it, but it will not chart the data and when I exit the 'Edit Series' dialogue and then come back, the named range is not shown.
i have a userform which has more than 20 textboxes. these boxes need to accept numbers only. what codes can i use so that all the textboxes will be formatted in such way?
I am struggling to find a macro which can look at a name in column 'BT' and search it in the address book of Outlook to then place the email address of that person in column 'ED'
There are 35,000+ people in the address book and there may be over 5 email addresses for one name, so is there any way a message can appear for the user to select which email address is correct if there is more than 1 contact for that name?
My VBA form for excel currently only accepts numeric. I want two of its fields to accept alphanumerics. Those two textboxe fields are cboIns and TextCmt in the code below.
Code for the form is given below.
VB:
Dim dic As ObjectDim Ctrls
Dim myTBoxes() As clsTxtBoxes
[Code].....
I'm trying to create a formula where I can compare two cells but accept them as equal is one is plus/minus 0.1.
Example:
Cell A1 is 3, Cell A2 is 3.2, I want Cell A3 to turn red (or report "1")
Cell A1 is 3, Cell A2 is 3.1, I want Cell A3 to turn green (or report "0")
I have a shared workbook. Just used as a checklist for daily tasks. But opened on 5 pc's for users to edit. Is there a way to assign the process of click Review > Track Changes > Accept/Reject Changes... to a marco button?
View 1 Replies View RelatedI'm setting something that allows the user to compare bond yield curves on a graph. The setup involves a dropdown to select the final year of data the user wants to see and several date drop-downs.
For example, if the user wants to compare the current yield curve out to 2031 against how the same curve looked the end of Q1 2011 and Q2 2011, he would select "2031" in the first dropdown and then select "4/1/2011", "7/1/2011", and "9/8/2011" in the other three dropdowns.
The data is on a separate sheet, and mechanics of my named ranges are sound. However, Excel won't allow me to add my named ranges to my graph.
As is, the series looks like this:
=SERIES($L$5,'2011'!$B$3:$B$25,'2011'!$C$3:$C$25,1)
I'm trying to replace $B$3:$B$25 with CRV_DATES and $C$3:$C$25 with CRV_ONE (when I get this to work I'll add the other curve to the chart). When I try to add them, though, I can't get out of the series dialogue. When I hit enter, nothing happens--no error message, no nothing. The change simply won't "stick".
Here are my primary named ranges and the ranges/functions I use within them:
CRV_DATES: =OFFSET('2011'!$B$3,0,0,FindCurve,1)
CRV_ONE: =OFFSET('2011'!$C$2,1,MATCH(DATE_ONE,StartDateRange,0)-1,FindCurve,1)
FindCurve: =MATCH(CRV_END,MaturityRange,0)
StartDateRange: =OFFSET('2011'!$C$2,0,0,1,COUNTA('2011'!$2:$2))
MaturityRange: =OFFSET('2011'!$B$3,0,0,30,1)
CRV_END: =Sheet1!$L$3
I want a format that does not accept the point and put the hyphen CPF.
I 123456789-10 format and desire that even putting the point, leave the cell in this format 12345678910.
I know I could use the replace function through the ctrl + l, most wonder if there's no way to customize the cell.
Name
Day
Total
AlanMon400AlanThur600TomMon200TomWed300JamesMon1000Output4002001000
What function/formula can I use if I want that function to accept 2 criterias and returns me a result. Based on the above example, if the criterias are Alan & MOn, it will return 400 and if the criterias are Tom and Mon, it will return 200 and if the criterias are James and MOn, it will return 1000. Bascially, I want a function that can accepts 2 criterias. I do not want to sum up the total of the rows that are associated with one of the criteria i.e Alan. For Alan, I want 400 instead of 1000
Using the Dynamic Named Range tip, I defined named variables as follows:
Xrange=OFFSET($A$2,0,0,COUNT($A:$A),1)
Yrange=OFFSET($B$2,0,0,COUNT($B:$B),1)
then tried to define my Chart series as follows:
=SERIES($B$1,Xrange,Yrange,1)
but it gives an invalid reference error. What am I doing wrong?
Assume the following list of addresses are all in separate cells of a single column (A1-A4). I just need the formula to extract the street addresses, and then a separate formula to extract the zip codes.
5430-44 PASCHALL AVENUE PHILADELPHIA, PA 19143 OPA/BRT#: 884350845
4010 MARPLE STREET PHILADELPHIA, PA 19136 OPA/BRT#: 651087200
2618 SOUTH HOWARD STREET PHILADELPHIA, PA 19148 OPA/BRT#: 391251216
5737 WOODCREST AVENUE PHILADELPHIA, PA 19131 OPA/BRT#: 522155600
I have a list for addresses in excel in single column as shown below - aanandhi narayanan 3430 chemin de riviere sanjose,CA95148
DOMINIC ABANO 3838 GLENGROVE WAY SAN JOSE, CA 95121
abdi abdi 5390 monterey rd #6 sanjose,CA95111
Sheribel Abinsay 3212 Gateland CT San Jose, Ca 95148
I need the result to be in a way like -
3430 Chemin de riviere
San Jose
CA
95148
3838 Glengrove way
San Jose
CA
95121
5390 monterey rd#6
San Jose
CA
95111
3212 Gateland CT
San Jose
CA
95148
I have around 12000 records with the same format.
On a worksheet called "Contact Info" column A starting in row 2 I have a list of names (variable length). In Columns B2-D I need the email address, work phone number, and cell phone number.
View 5 Replies View RelatedI have a linked text box and spin button on a userform so the user can enter text or use the buttons and I'm having trouble barring non-integer inputs! Here's what I have so far:
Text box = NumberBox
Spin button= NumberSpin
I'm building a form comprising some text boxes and drop down lists. I'd like for data (once input into the form by the user) to input, upon click of a submit button, into an excel spreadsheet, row by row.
Here's where i'm struggling: I need the form to validate data before submitting. Namley, the form must not allow null values to be submitted and will show a message box telling the user what is needed.
Below is what i've got so far. I've tried playing around with this but am struggling to implement the above functionality:
[Code] ..........
I'm very new to Excel and definately to macros/vba. I've already received a tremendous amount of help with this file but I'm am really struggling here and getting very frustrated! I've got a pretty good handle on the excel part but the macros/vba is another story. Here is what i'm attempting to do: I've created a form "frmMacroButtons" which has 8 buttons. When the workbook is opened I want this form/window to launch. I want the user to be able to select any of the buttons but also be able to just click into the worksheet manually if wanted but have the window stay open to go back to use the buttons. Each of the buttons I've typed a description of what I want each of the buttons to do in the code view.
View 14 Replies View RelatedI am looking for a formula that either accepts the number in a cell if the numbers on two other cells are "approved". In other words, I have on cell A1 my value to be tested. On cells A2 and A3 I have two numbers. On cell A4 I'm looking for a formula that copies the number on A1 if A2 is bigger then 0.25 and A3 is smaller then 0.35. In not, there's no copy or a N/A appears.
View 3 Replies View Related