Cell Accept Only Date Or Word NA

Nov 25, 2011

If I want to let cell accept date or word "NA" only if i use custom data validation.

View 3 Replies


ADVERTISEMENT

Excel 2010 :: Data Validation Won't Accept Start And End Date From Cell Values?

Mar 16, 2014

Data validation in an Excel 2010 workbook.

I want the date input to be restricted a start date and an End date specified in two cells on the sheet. However, when I set up the Data Validation, ANY date will be accepted.

As an example cell Z1 contains the date 1/3/2014 and Cell Z2 contains the date 31/3/2014, so in the Data Validation box, the Start Date is referenced to Z1 and the End Date is referenced to cell Z2.

But I can enter 1/9/2020 and the Data Validation happily accepts that date.

View 12 Replies View Related

Code For Accept Today Date

Aug 21, 2009

code which will allow me to update only todays date in particular cell in that cooumn and once the date has been entered it will save as value so that next day it will not change the date.

View 10 Replies View Related

Format A Cell To Accept Multiple Conditions

Jun 12, 2009

if I want 2 conditions satisfied in order for a value to be returned, would I need to set up/name tables, set ranges, etc? e.g,

If A1 contains baby, AND B1 contains Carly, then C1=carly.jpg
If A1 contains girl, AND B1 contains Carly, then C1=carlyg.jpg
If A1 contains baby, AND B1 contains Billy, then C1=billy.jpg
If A1 contains summer, AND B1 contains Wally, then C1=winter.jpg
etc.

Roughly 40 different conditions will be needed. What formula would I use and how should I name and set up my table?

View 4 Replies View Related

Formatting Does Not Accept Point And Put Hyphen In Cell

Dec 10, 2012

I want a format that does not accept the point and put the hyphen CPF.

I 123456789-10 format and desire that even putting the point, leave the cell in this format 12345678910.

I know I could use the replace function through the ctrl + l, most wonder if there's no way to customize the cell.

View 6 Replies View Related

Formula To Accept / Delete Cell If Numbers In Other Cells Meet Defined Criteria

Apr 21, 2014

I am looking for a formula that either accepts the number in a cell if the numbers on two other cells are "approved". In other words, I have on cell A1 my value to be tested. On cells A2 and A3 I have two numbers. On cell A4 I'm looking for a formula that copies the number on A1 if A2 is bigger then 0.25 and A3 is smaller then 0.35. In not, there's no copy or a N/A appears.

View 3 Replies View Related

Export Cell Contents To Word Fields In A Protected Word Document

Jul 6, 2009

Is it possible to export Excel cell contents to Word fields in a protected Word document? For example...

What code would be needed to tell Excel to open up, copy and export the contents of A2 in the active sheet of a workbook to "Field 2" in a Word document named "Report 01" and then put the contents of B2 to "Field 2" etc?

Do both applications have to be opened up at the same time or is Excel able to open up Word on its own? Will the macro be able to....

1. Automatically open up the correct Word document?

2. Look ONLY in a certain folder for the "Report 01" Word document?

or

Bring up a "selection" box that allows you to select the document you wish Excel to export it's data to?

3. Close and save the Word Document without any user intervention?

View 2 Replies View Related

Excel 2003 :: Count How Many Times A Word Is In A Range / Word Can Be In Cell More Than Once

Feb 16, 2012

I need to count how many times the word Test is in the range B4:H9 with

Range N2 = Test the formula below works if Test is only in the cell once.

=COUNTIF($B$4:$H$9,"*" & N2 & "*")

But I have data in cells like below, this is all in one cell, so how would I have it count all the times test is in the range when some cells have test 2 or more times in a single cell?

5
Test
8am-2pm
Test
5pm-10pm

View 5 Replies View Related

Delete The Rows Until It Meets A Cell With The Word "Date"

Mar 9, 2007

I am trying to make a simple program that will go down column A deleting the rows until it meets a cell with the word "Date" in the A column. When it has found that row I want it to delete that row also and then stop.

This is what I have so far

Sub FindAndDelete()

Dim row As Integer
Dim col As Integer

ActiveSheet.Range("a1").Select

If Range("a1") "date" Then Rows("1:1").Select
Selection.Delete
End Sub

I tried defining row =1
col = 1

and then going if range ("rowcol") but no joy.

View 9 Replies View Related

If Word Is Contained Within A Cell, Ouput That Word In Another

Jul 18, 2008

I have a bunch of cells in column b that have products.

Column B
Dell 24" lcd
vaio sony laptop
8.0 mpxl kodak camera
photoepsonprinter

Basically in Column A I want a formula that'll say.

If the word "dell" is somewhere in cell b1, then put the word "Dell" in cell a1.
If the word "sony" is somewhere in cell b1, then put the word "sony" in cell a1.

And then so on and so forth down through column A. The brand names are potentially endless, so is there a easy way to on like a seperate sheet make a list of brand names and have it pull from there?

Originally I made a if function that said if the brand name was contained in the cell then output the brand name, but that caps at 7 for the amount of brands i can use....

View 9 Replies View Related

Opening Word & Count Word Instances In A Word Document

May 26, 2006

I have an excel program that is supposed to count word instances in a word document. I can't seem to find the right declaration for a word document.
For example to declare a workbook in excel its

Dim wb As Work Book

I've tried

Dim doc As Word.Document
'or
Dim doc As Word.Application

as shown in some of the forum posts, but an error user-type not defined keeps displaying.

View 2 Replies View Related

Accept DDE Input Only

Nov 1, 2006

if it was possible to limit data input to DDE (I am using winwedge to capture numeric data). Dave Hawley replied that all I had to do was lock the cells and protect the workbook. I have now done this but the data is not accepted unless the cells are not protected, anyone any ideas on what I am missing?

View 4 Replies View Related

Number Field Won't Accept Zero

May 30, 2007

I have a cell tha't set up as a number format with the validation only accepting 3 whole number characters, however if the number is 098 then it converts it to 98. I need for that cell to be a number type format and to accept 0 as the first character. I thought I tried everything but I'm sure I'm missing something.

View 9 Replies View Related

File Wont Accept VBA

Jul 2, 2009

My code is correct, I have confirmed this with several people. However, the code does nothing.

View 9 Replies View Related

Validate Cells To Only Accept

Jan 19, 2010

I have to validate a cell to only accept the letter a, d ,f ,g h,. I know this is probaly very simple but i havent touched excel since last november and have completely forgotton the most simple of things!

View 4 Replies View Related

Textbox To Accept 12 Digits

Nov 10, 2008

below code. I need to change this code to accept 12 digits.

View 13 Replies View Related

Not Accept The Address Format

Sep 21, 2009

I have a large spreadsheet with approx 1250 rows, the email address was filled in like this: Name (address@company.com)

the software that I am importing the sheet into will not accept the address in this format. I need just the address, no parentheses, name, etc.
Is there a rule I can run to delete everything I do not need so that I don't have to delete info in 1250+rows?

View 9 Replies View Related

How To Delete A Word In Date

Jan 24, 2013

I have a file in which the data is written in cell.

1g Injection Total
10mg Tablets Total
1.5% w/w Gel Total

i want the to delete the word "Total" from each cell so that i can use the vlookup formula to get the desired result from another file.if there is any solution.looking forward for the an easy and understandable reply.

View 4 Replies View Related

Update Countcolor UDF To Accept Argument

Jan 5, 2012

With the UDF below and the portion highlighted in red, how can the red part be made part of the arguments instead of specifying it in the code?

Code:

Function Countcolor(rColor As Range, rCountRange As Range)
Dim rCell As Range
Dim iCol As Integer
Dim Result
Application.Volatile

[Code]....

View 5 Replies View Related

Chart Will Not Accept Named Range

Oct 12, 2012

I am trying to set up a chart, such that its charted ranges can be change by changing some cell values.

I am having a hard time getting past first base, however.

I have created a named range:

Code:
Name: LowerTrend
Refers To: = Offset(Values!$AV$200,0,0,800,1)

When I try to edit the chart series by placing 'LowerTrend' into Series values it will select the range by showing the dashed line around it, but it will not chart the data and when I exit the 'Edit Series' dialogue and then come back, the named range is not shown.

View 3 Replies View Related

MultiPage Textboxes To Accept Only Numbers

Jun 14, 2007

i have a userform which has more than 20 textboxes. these boxes need to accept numbers only. what codes can i use so that all the textboxes will be formatted in such way?

View 9 Replies View Related

Allowing VBA Forms To Accept Alpha Numeric?

Dec 18, 2012

My VBA form for excel currently only accepts numeric. I want two of its fields to accept alphanumerics. Those two textboxe fields are cboIns and TextCmt in the code below.

Code for the form is given below.

VB:
Dim dic As ObjectDim Ctrls
Dim myTBoxes() As clsTxtBoxes

[Code].....

View 6 Replies View Related

Compare Two Cells But Accept Them As Equal Is One Is Plus/minus 0.1

Jun 10, 2009

I'm trying to create a formula where I can compare two cells but accept them as equal is one is plus/minus 0.1.

Example:
Cell A1 is 3, Cell A2 is 3.2, I want Cell A3 to turn red (or report "1")
Cell A1 is 3, Cell A2 is 3.1, I want Cell A3 to turn green (or report "0")

View 2 Replies View Related

Assigned Accept / Reject Changes To Macro Button

Feb 7, 2014

I have a shared workbook. Just used as a checklist for daily tasks. But opened on 5 pc's for users to edit. Is there a way to assign the process of click Review > Track Changes > Accept/Reject Changes... to a marco button?

View 1 Replies View Related

Chart Won't Accept Dynamic Named Range

Sep 9, 2011

I'm setting something that allows the user to compare bond yield curves on a graph. The setup involves a dropdown to select the final year of data the user wants to see and several date drop-downs.

For example, if the user wants to compare the current yield curve out to 2031 against how the same curve looked the end of Q1 2011 and Q2 2011, he would select "2031" in the first dropdown and then select "4/1/2011", "7/1/2011", and "9/8/2011" in the other three dropdowns.

The data is on a separate sheet, and mechanics of my named ranges are sound. However, Excel won't allow me to add my named ranges to my graph.

As is, the series looks like this:

=SERIES($L$5,'2011'!$B$3:$B$25,'2011'!$C$3:$C$25,1)

I'm trying to replace $B$3:$B$25 with CRV_DATES and $C$3:$C$25 with CRV_ONE (when I get this to work I'll add the other curve to the chart). When I try to add them, though, I can't get out of the series dialogue. When I hit enter, nothing happens--no error message, no nothing. The change simply won't "stick".

Here are my primary named ranges and the ranges/functions I use within them:

CRV_DATES: =OFFSET('2011'!$B$3,0,0,FindCurve,1)
CRV_ONE: =OFFSET('2011'!$C$2,1,MATCH(DATE_ONE,StartDateRange,0)-1,FindCurve,1)

FindCurve: =MATCH(CRV_END,MaturityRange,0)
StartDateRange: =OFFSET('2011'!$C$2,0,0,1,COUNTA('2011'!$2:$2))
MaturityRange: =OFFSET('2011'!$B$3,0,0,30,1)
CRV_END: =Sheet1!$L$3

View 2 Replies View Related

Function To Accept 2 Criterias And Return Result

Sep 8, 2008

Name

Day

Total
AlanMon400AlanThur600TomMon200TomWed300JamesMon1000Output4002001000

What function/formula can I use if I want that function to accept 2 criterias and returns me a result. Based on the above example, if the criterias are Alan & MOn, it will return 400 and if the criterias are Tom and Mon, it will return 200 and if the criterias are James and MOn, it will return 1000. Bascially, I want a function that can accepts 2 criterias. I do not want to sum up the total of the rows that are associated with one of the criteria i.e Alan. For Alan, I want 400 instead of 1000

View 9 Replies View Related

Chart Series Does Not Accept Dynamic Range

Nov 26, 2006

Using the Dynamic Named Range tip, I defined named variables as follows:

Xrange=OFFSET($A$2,0,0,COUNT($A:$A),1)
Yrange=OFFSET($B$2,0,0,COUNT($B:$B),1)

then tried to define my Chart series as follows:

=SERIES($B$1,Xrange,Yrange,1)

but it gives an invalid reference error. What am I doing wrong?

View 2 Replies View Related

Only Accept Integers In Textbox With Linked Spin Button

Jun 9, 2014

I have a linked text box and spin button on a userform so the user can enter text or use the buttons and I'm having trouble barring non-integer inputs! Here's what I have so far:

Text box = NumberBox
Spin button= NumberSpin

View 4 Replies View Related

Validating Form Data To Not Accept Null Values

Jul 24, 2014

I'm building a form comprising some text boxes and drop down lists. I'd like for data (once input into the form by the user) to input, upon click of a submit button, into an excel spreadsheet, row by row.

Here's where i'm struggling: I need the form to validate data before submitting. Namley, the form must not allow null values to be submitted and will show a message box telling the user what is needed.

Below is what i've got so far. I've tried playing around with this but am struggling to implement the above functionality:

[Code] ..........

View 3 Replies View Related

Macro Window With Buttons To Accept User Input

Jan 2, 2009

I'm very new to Excel and definately to macros/vba. I've already received a tremendous amount of help with this file but I'm am really struggling here and getting very frustrated! I've got a pretty good handle on the excel part but the macros/vba is another story. Here is what i'm attempting to do: I've created a form "frmMacroButtons" which has 8 buttons. When the workbook is opened I want this form/window to launch. I want the user to be able to select any of the buttons but also be able to just click into the worksheet manually if wanted but have the window stay open to go back to use the buttons. Each of the buttons I've typed a description of what I want each of the buttons to do in the code view.

View 14 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved