I want to calculate a mark-up on one cell. If it is under a set amount then I want the mark-up to change. If it is then over a set amount but below another, then I want the mark up to change again, etc. I have got this far (eg. below) but the calculation does not work properly when the value in "A3" is over "1". =IF(A3<=0.49,A3/0.2,IF(A3>=0.5,A3/0.25,IF(A3>=1,A3/0.35,IF(A3>=2,A3/0.5,0))))
View 3 Repliesformula stating that:
if a number is greater than 1 add one 1 box (250) and if the number is greater than 9 add 2 boxes and is its greater than 18 add 4 boxes
i want this all in one formula,
Basically I have 12 sheets of data, if column H (in any of these sheets & rows) has a currency value greater than 40;
I want to copy the entire row/s to Sheet16 named "Major" - which has the exact same columns and formatting. I need this to be automatic.
What code do I need, where do I put the code?
I have to make a table that shows that a if someone purchases
less than 5 items they receive no discount
5-10 items they receive 2% discount
11-20 items they receive 5% discount
21-50 items they receive 8% discount
over 50 items they receive 10%
and it has to be done in a way that the discount rate can be calculated using Vlookup I am struggling to find the best way to write this table. i tried numbering 1 to 50 and writing the corresponding discount rate in the second column but this looks untidy and can't calculate greater than 50 as i am not sure how to write it in the cell so it reads as >50 and not just 50.
I am trying to count the number of rows that have values greater than 10/01/2008 in either of two fields. I tried following formula but instead of giving total number of rows, it returns a random date.
View 2 Replies View RelatedI have a Macro of 55 Columns and 2000 Rows I need to change the value in several Cells of the row in which the value of AZ is 200.01 or more. I need the following if ANY Cell in AZ2:AZ2000 is equal or greater than 200.01 then the following Cell in that Row will equal the following:
AG = 20
AW = 11
AX = " " (BLANK)
BC = N
I have attached an example of the spread sheet with Macro embeded and how it should look after the above is run. I do not know if or how to I need to tag the macro within the attachement.
I'm struggling to complete this formula. No matter what the entry in M30 is
(which is a concatenated formula from another sheet), I only get the highest response, which is 18.
I'm assigning a risk score based on a dollar amount. The formula is: ....
This is what I am tyring to do. I would like B7 to show $60 once A1 is greater then 25.
View 3 Replies View RelatedSay I need to figure out bonuses based on income.
If the income is less than 100,000 then the bonus is 5%.
If the income is between 100,000 and 249,000 the bonus is $5000 + 6% the amount above 100,000.
If the income is between 250,000 and 499,999 the bonus is $14000 + 7% the amount above 250,000.
If the income is over 499,999 the bonus is $31,500 + 8% the amount above 500,000
What is the formula I need to enter to make this work.
Need to sum that won't work.
i'm using:
A B C
00:00 07:00 =if(A1>0,B1,"N/A")
07:00 04:00 =if(A2>0,B2,"N/A")
00:00 07:50 =if(A3>0,B3,"N/A")
00:00 06:50 =if(A4>0,B4,"N/A")
This doesnt seem to work though using time formats. Column C just brings through Column B no matter what is in Column A. I've attatched an example below.
I am trying to create a formula that will automatically calculate greater than or less than and then add x or y depending.
I am shipping some items and we can fit 100 or less in a small box that weighs 3oz and 100+ in a bigger box that weighs 6 oz.
I want the formula to look at the quantity and determine if the quantity is 100 or less it should add 3 and if greater than 100 then add six.
I tried tons of google searches but can't seem to figure it out. This is the first forum I could find that I figured might be able to help.
I have been doing this all by hand in multiple columns...
Here is my code as it is right now (With the correct range, and yes its a messy range :
[Code] ......
That is my range and thats the range I have to use (The stats are spread out in those rows. How I can get this to disregard 0's? Right now it seems to fail on the third rangevalue (For example in the range above it fails and highlights Y88), but if i remove that value it does the same on the next one instead, always the third.
I have tried =AVERAGEIFS(Range,">0") versions and also ones with /COUNTIF after and others but cant get this to work.
I have a list of dates B2:B248. All the cells have been formatted to date type dd/mm/yyyy.
I'm just trying to count the number that are earlier than a certain date.
I thought a COUNTIF function would work! I've tried DATE, DATEVALUE etc.
I can work with the dates ie B2 (which would have 23/08/2007)-1 comes out as 22/08/2007. However when I try if(B2<B3,"lower","higher") it gives me a false reading - even when B2 is earlier than B3.
How can I check if my list of dates is earlier than a specified date?
I want to do is count in a column numbers greater than 13 but less than 20.
I am also trying to write another formula that counts numbers equal to or higher than 1 but less than 12. In other words,
I do not want this count to include any cells that contain 0.
I have this table with min and max amounts that requires a fixed amount when when the condition is met. How do I write a formula for this. If result is >$0 but < $100 = $15 and so on. I canlt get it right..........
View 3 Replies View RelatedI have a table populated with equations. I need to write a function to find
the smallest value in that table. However, I want to ignore the zero values.
From a dataset containing 8, 5, 0, 7 I want to find 5, not zero.
Is it possible to have the condition IF(H9>E9>G9,E9-G9,0) so that the calculation is only done if E9 is between H9 and G9?
View 5 Replies View RelatedI am trying to use Countif on a range of cells some of which have a value of "< 5" (ie less than 5), but for those cells it returns a sum of 0 (zero).
View 2 Replies View RelatedI am trying to format a column of data. What I would like to do is move the contents of the cell based on the number in the cell.
I would like to move the content if it is greater than 5, but less than 70. If the content is between these, move it to a given location.
Is this an if/then? Ive got a few programming books here but not sure how to relate what I want to do to an example in the books.
I have the following values that I need to perform a calculation on, but I am not sure how.
A1 = -.98
A2 = .98
A3 = 1.0
I would like the results in colmun B to be:
B1 = 1.02
B2 = .98
B3 = 1.0
I would like to achieve this with a formula that I could fill down.
I need a formula, If the number is greater than 1 and less then 30, it returns Yes, if not, then no.
I have a huge sheet with data. I want to fix all values exceeding e.g. 2000 to 2000.
for instance:
400 --> 400
1600 --> 1600
2300 --> 2000
700 --> 700
3100 --> 2000
etc.
I have this formula to tell me how many times in a given column the value is greater than zero:
=COUNTIF('Data Entry'!AY3:AY117, ">0")
But I also need to know how many times the value in AY3:AY117 is greater than zero PLUS how many times the value in AZ3:AZ117 is also greater than zero
I've scoured this wonderful website and have got as far as:
=SUM(IF('Data Entry'!AY3:AY117,"> 0"+SUM(IF(AZ3:AZ117,"> 0"))))
but I'm clearly still way off.
Here is my formula.
=If(Sheet1!J5=$J$4,0,(Sheet1!$J$4-Sheet1!J5)*Sheet1!$J$1)
It is perfect, except it doesn't have one final step. What I need it to do
is be able to do that ONLY if it is greater than or less than by a specified
amount. So there needs to be a modification of ... Sheet!J5<> (but by 100 or
any other number that I set) $J$4,...
is there any way of using the =SMALL function to rank only numbers above zero so that the zeros don't keep showing up as the smallest figures?
View 2 Replies View RelatedI have a list of numbers like this.
0,0,0,12,3,1,6,9
I need to find the first greater than zero number and then add up that number and the following two numbers. In the case above the answer would be 16.
Need the formula to find any number from a range under this format 00:00:00, Greater than 04:00:00 but Less Than 12:00:00.
View 5 Replies View RelatedIn columns A and B, I have a list of time values. Format: [h]:mm:ss. Column C is B-A. Last row of Column C is the sum of all time values of column C. Sometimes A>B, or either A or B is blank. In such casescorresponding C value becomes ##### (negative date and time) And hence sum of all C values which is in last row of C becomes ####.
View 2 Replies View RelatedI have three cells with data: 23.40, 12.34, and 0
I'm looking for a formula that will add up the cells only when all three cells have a value greater than zero. In other words, if the last cell is zero I would like the value of the formula to =0 until data is entered
I am looking for a formula which will allow a value to round up or down to the nearest x.99 if the value is greater than x.95 or less x.05 otherwise remain the same. i.e if the value is 0.96 it should read 0.99 and if the value is 1.04 it should read 0.99. however if the value 1.05 it should read 1.05.
View 9 Replies View Related