Multiply Numbers & Return X Percent Of Result
May 30, 2009
I have an inherited formula and I am not sure if it is giving me the correct answer. It is:
=0.03*668*0.75*0.10
The result is 1.503
What I am aiming for is to get 3% and 25% of 688, deduct the results from 688 and then get 10% of that answer.
Is the inherited formula correct?
View 3 Replies
ADVERTISEMENT
Jul 28, 2007
I managed to put in a long formula in col G for multiple criteria in my worksheet. I am still puzzled as to how do I caculate the separate two Total Sums of these below:
1) if values in col G is numeric, using value in col G X unit price (answer is 124955.54)
2) if strings in col G start with text "OH_excess", retrieve its number, then X unit price (answer is 209690.95)
View 3 Replies
View Related
Jun 5, 2014
I want to be able to enter a value into a cell (within a specified range) and have it automatically multiply by a set value and overwrite the original entry with the result so making it all happen within one cell. The set value would be another cell on that sheet.
So the range for example is "H17:H74" and the value I want to multiply by is "D8"
Is this possible?
I've looked at another forum but it wasn't working when I wanted to define the set value as a cell.
View 5 Replies
View Related
Nov 10, 2008
I know when you multiple anything by 0 the answer is 0.
But I have a list of numbers I need to multiply out
but want to keep the total even if there is a 0 in the sequence
Eg
A1*A2*A3*A4
10*15*0*11
5*21*6*0
0*14*10*0
So A1*A2=150 if I then multiply by A3 I get 0, but I need to ignore the cells that have 0.
So for the last example my answer would be 140.
View 9 Replies
View Related
Nov 4, 2008
I have a spreadsheet with a large list of plants. Each plant has a breakdown of colors by container size. Each cell contains a number that corresponds to a percent, e.g. a cell may contain the number 20, which would also mean this number is equal to 20%. I want to change all numbers to a percent of 100, or turn 20, for instance, into .20. There are many hundreds of numbers that I need to make a percent, so I was hoping I could do this in one fell swoop somehow. This percent number will be used in another spreadsheet for calculating on order. How do I do this?
View 2 Replies
View Related
Sep 12, 2012
I have a percent 3.14%, that I want to show 15, 20 and 25% above and below that percent. I am showing below the results and then formula. The top calculation results in the same on both the left and right. However the -15,-20, -25% results are different. Which is correct.
3.14%
20% +/-
3.14%
0.63%
or
6.28%
1.57%
2.51%
[code].....
basic math, but I don't understand why the results are different.
View 3 Replies
View Related
Feb 23, 2010
I would like to multiply every number in one column with every number in another column with every number in a third column (columns A,B and C).
There are less than ten cells in each column.
View 9 Replies
View Related
Mar 1, 2008
I did a search myself, then went through the 5 pages the "Post" function brought up. I'm sure it's been asked before, I must just not be using the right words
I need to tell every cell in one column to multiply itself by a firm number and a percentage. Ex: Column F will be the result of $77.80 times 75 percent all the way down the column. Column G will be $27.21 times 100 percent all the way down.
I could enter the formula into every cell, but I wondered if there's a way to just tell the whole column, only once, what it needs to do. PS-I work for an insurance company. The employees of a company want a spreadsheet showing exactly who pays exactly what. Ex: Their paystub shows $142.90 coming out of their paycheck. Their employer pays 100% of medical, 75% of dental. The columns would show Total, Employer Medical, Employer Dental, Employee Medical, Employee Dental.
View 2 Replies
View Related
Oct 30, 2013
Excel (2000), what formula would I use to accomplish the following?
If A1 equal or less than 1000 value, multiply by B1, otherwise multiply by C1.
View 9 Replies
View Related
Aug 31, 2010
How do you multiply a column and have the results reappear in the nextcolumn? E3:E3631*1.3 = F3:F3631, is the code I tried.
View 3 Replies
View Related
Dec 9, 2013
Been working on this problem for a while, I need to have a vlookup (or other function) return locations based off of a concatenate (for unique identifiers). Only issue is that the concatenate formula creates doubles which returns the same location for each vlookup. I have attached an example file.
View 2 Replies
View Related
Oct 14, 2008
creating a formula that will give me a result of either "W" or "L" depending on the amount in corresponding cell.
View 9 Replies
View Related
Dec 16, 2009
I need to figure out a formula that will look across a row and once it finds the criteria specified, it will return a value going down the corresponding column. I have attached a file showing the example.
View 3 Replies
View Related
Aug 5, 2008
I have this formula in C7:
=VLOOKUP(A7,A$20:C$76,3)
The Table Array contains a list of 12 months, and there will be a match to the Lookup Value in A7 each month. I would like C7 to reflect the last completed match in the list (it will be updated each month). So, when June is the last completed month, C7 will return the matching amount from the Table Array for June; then when July is completed, I would like C7 to reflect the matching amount for July.
View 9 Replies
View Related
Dec 6, 2006
I have tried searching for this topic and have been unsuccessful. Perhaps my search was too broad. Either way, I am trying to understand how to search/query a specific data entry among several sheets, and then return corresponding values from adjacent cells.
View 3 Replies
View Related
Dec 30, 2006
I created a drop down menu from a named data range on a seperate spreadsheet in the same workbook. Based on the selection from that drop down menu I want a preassigned number to pull into another cell. I'm not thinking of the correct formula or something, because it's not working. Could it be because it's text? My spreadsheet with the data is as follows:
Bridger to American Fork 051725
Hunter to American Fork 051725
Hunter to Delta 051715
Hunter to Hiawatha 051728
Navajo to Am. Fork w/ front 051725
Navajo to Am. Fork w/o front 051725
The 1st column is the origination/destination and I named that range "freight hauls". Which is what the dropdown menu on another sheet (AP Reconcilliation) consists of. From that, I want the 2nd column number to pull into another cell on the AP Recon sheet. The formula I wrote that isn't working is: =index('AP Reconciliation'!A2:B8,match(A6,'Freight Hauls List'!B2:B7,0),2)
View 3 Replies
View Related
Jan 17, 2014
I have in the attached file four variables, with their values in B3:B6, and the results of applying a formula to them in B8.
How to determine which value variable C must be changed to so that the formula returns the result in B10?
Solution.xlsx‎
View 4 Replies
View Related
Jul 2, 2009
I want to return a result IF a certain value is found in another cell. I've attached a sample workbook, but here's a description:
On the "Inventory" worksheet, in column H, I want to lookup the quantity in column B from the "Warehouse Response" worksheet. If the Part # in column E of the response sheet is NI1088106, I want THAT value to show under the NI1088106 part number, and I want the quantities for the NI1089106 to show under that part number. Ideally, the result of the formula would show a "0" if no data is found.
Here's the formula I tried beside the NI1088106 data, but it's not giving the desired results: =IF('Warehouse Response'!E:E="NI1088106", VLOOKUP(LEFT(A3,3),data,2,0))
View 3 Replies
View Related
Nov 10, 2011
What I want to do is, given the data in col. a, I want to supply a number(range) of strings which can be found in column a, whenever a string is found, which exists in given range, I want to write the string from the Key(col. c) in col b instead of the value from the string that matches a value.
See below for example of what I got working but not exactly what I was looking for
Col. A- Data
Orangegreen
Blackwhite
Blueyellow
Col. B - Result
Col. C - Keys
Orange
White
Yellow
I used
Code:
=INDEX(A1:A3,MATCH("*"&C1&"*",A1:A3,0))
This does produce a result, but not entirely what I am after.
This requires only one string to search for, and will in cell B1 result in a value of 'Orangegreen' as I can only supply one valeu to the function. What I want to do is supply the function with a range of values, and have those values outputtet in colb instead af the value of cells where the result is found.
I tried modifying the function to include a range, but that does not produce a valid result.
View 5 Replies
View Related
Mar 3, 2007
Any other day but today (I've been starring at numbers too long) I could do this.
I need a simple formula that will return:
a. 3 if resut is >= $2.5M
b. 2 if over >= $0.5M
c. 1 if
View 9 Replies
View Related
Aug 17, 2007
I have an excel worksheet that consists of 4 tabs. Each tabs has approximately 60,000 lines of data. The data consists of user id's and menus that correspond to the user id. There are 131 user id's in total. I would like to be able to return all the menus for one of the user id's. If we need to start with one tab and work from there, that's fine.
View 9 Replies
View Related
Nov 29, 2007
I've created a Database using excel which feeds data to a pivot table I created based on it. My objective is to create a new item in this pivot table (Pivot Table > Formulas > Calculated Item) which calculates the average data for the past 6 months.
The formula I used in order to get a result is this:
=IF(((May+June+July+August+September+October)/6)=0;;(May+June+July+August+September+October)/6)
and the problem is that the answer is 0 when there is no data for all 6 months (for example, there is a customer who hasn't baught anything during the past 6 months), the pivot table displays 0, instead of not showing this customer at all. My goal is for the IF function not to return any data if the result is 0, so that the pivot table doesn't show items with no data.
I also tried:
=IF(((May+June+July+August+September+October)/6)=0;"";(May+June+July+August+September+October)/6)
and also using ;" ";
but these formulas return #VALUE! in the pivot table, given that the Data is "SUM OF Sales" and "" is not a number.
How can I get the formula not to show anything at all?
In addition to this, I was wondering if it is possible to make this formula more automated, so that it calculates the average of the past 6 months, taking into account some type of reference month (rather than having to edit the formula each time a new month is analyzed).
View 9 Replies
View Related
Sep 21, 2009
Col ACol BCol CCol DCol ECol F
row 1811TAX CONSIDERATIONS1TAX CONSIDERATIONS
row 1911TAX CONSIDERATIONS#N/A
row 2011TAX CONSIDERATIONS#N/A
row 2121FLYING FALCON1TAX CONSIDERATIONS
row 2221FLYING FALCON#N/A
row 2321FLYING FALCON#N/A
row 2431IN COMMAND1TAX CONSIDERATIONS
row 2531IN COMMAND#N/A
row 2631IN COMMAND#N/A
I have 5 coulmns of data and in col F I have the following formula in row 18
=VLOOKUP(E18,$C$18:$D$800,2,FALSE)
the results come back " TAX CONSIDERATIONS"
however the same results comes back in row 21 and row 24......how can I modify this lookup to change when column B changes
View 9 Replies
View Related
Sep 16, 2009
I have a production planning spreadsheet that is updated every week from a database to a new sheet. This sheet is 'Sheet1', last weeks update becomes 'Sheet2'. Every day people annotate and colour cells for various orders, depending on their place within the planning scheme. It's really only the formats that I need to copy across, I could use the VLOOKUP function for the values - So I suppose you could say I'm looking for a VLOOKUP macro/VBA Code which keeps the original formatting (cell colour etc.)
View 2 Replies
View Related
May 30, 2006
After using a vlookup to find a value in a cell I want it to return the cell belows information.
View 2 Replies
View Related
Oct 27, 2006
if Cell F42 contains 50%, then my fomula returns "wrong"
=IF(AND(0%<F42,F42<50%),"F",IF(AND(50%<F42,F42<60%),"D",IF(AND(60%<F42,F42<70%),"C",IF(AND(70%<F42,F42<80%),"B",IF(AND(80%<F42,F42<100%),"A","wrong")))))
how do I get the formula calculate correctly?
View 7 Replies
View Related
Nov 6, 2006
When i have a formula standing at A3 fore example =A1-A2
and when i fill in a number like 100 at A1
And i fill in a number like 150 at A2 then at A3 where i had make my formula in there stands -50
Now i want the -50 not to disapear but instead there must be stand a 0(zero)
What is the formula i can use
i dont mind to put in at another cel like A4 for example
View 9 Replies
View Related
Dec 15, 2006
I have a list of people with SSN, about 3000. This list contains business done by each individual, which can be in all 50 states. I have another list of the same individuals with just their name and addresses and what we call "client number". I need to put the client number with the list for the individual states. See example list:
List of individuals with client numbers
123 John Doe
456 Jane Doe
List of individuals with state business
John Doe AR
John Doe CO
John Doe FL
John Doe MS
John Doe TX
Jane Doe MS
Jane Doe TX
Jane Doe AZ
I need for those client numbers to appear in the column before the names on list with states.
Example:
123 John Doe AR
123 John Doe CO
123 John Doe FL
456 Jane Doe MS
456 Jane Doe TX
View 6 Replies
View Related
Dec 19, 2006
621
532
249
I have these numbers located in column A (rows 1:3)
formula that will return my search result (in these case 532) as well as the information immediately above & below the location of cell that has my search info?
View 9 Replies
View Related
May 7, 2007
I have two workbooks Raw File and Lookup_Test, I want to find the value of Column A from Raw File, in Column A of Lookup_Test, if the value if found then i want the value in Column D from Lookup_Test, to be copied to the Column B of Raw File .
Well its like using vlookup , however i am trying to avoid using Vlookup and find any other way of doing the same.
View 9 Replies
View Related